2010 Mac Mini power cord loose? and Abode flash player bad??

Just received new 2010 Mac Mini 2 days ago. It looks different and better features than old Mini I had.
I am happy with newer Mini.
Problem: The power cord loose and not good plug in.
Need replace newer the power cord. Who I should contact to or go apple store to replace?
Anyone use Abode Flash Player version into my new Mini because I watch Hulu.com a lot. I read some forum here and bad news about Abode Flash Player. Is true?
Any suggestions.
Thanks

COME ON

Similar Messages

  • 2010 mac mini Home cinema sound and Home cinema headphones

    Hello
    im waiting for my 2010 mac mini to arrive,
    ive experience with home cinema setups in the past.
    Im looking to use my mac mini as a home cinema set up.
    Im fine with the visual side ( projectors and hdtv).
    The audio.
    How on earth do i get home cinema sound into headphones.
    due to where i live, headphones are the only option i have ( neighbours dont like noise.)
    ive tried :-
    sony mdr-drs7100
    Pioneer SE-DRS3000c
    pioneer dir-8000c.
    the three above are ok as they have home cinema audio processing built in and worked with the optical digital output fine.
    bass on the above 3 is weak.
    i aso will prefer a wired set of headphones ( had enough of wireless)
    im now looking at another route.
    1) a decent headphone amplifier capable of playing DTS and Dolby digital 5.1
    2) decent set of headphones to handle the above.
    anyone any setups they can share that work
    many thanks

    Hey David,
    My issue was resolved by ensuring that I was using a PAL resolution and frequency (720p @ 50 Hz or 1080p @ 50 Hz) for my PAL TV. Anything else causes audio stuttering through my HDMI cable.
    Don't ask me why. Try this on your setup by using only the one of your TV's native resolutions and frequencies (Should say NTSC Television on every native TV resolution if you are in the US, PAL Television in Europe). If you do have an NTSC TV, then you might be able to use all of the 60 Hz frequency resolutions without HDMI audio out problems, but I wouldn't count on it.
    From what I've researched on the issue, it is only TV's that have this problem, and it is a strange one, as it is actually a  display setting problem with an audio error symptom.

  • Replace mid 2010 mac mini hard drive(s) and thermal sensor(s)

    TL;DR: How do I swap SSd for HDD in Mid 2010 Mac Mini without Fan problems.
    I'd like to replace both my Mac Mini HDD's with SSD's, but removing/repositioning* the factory thermal sensors will default the fan to full throttle! (I've had this happen on my other mid 2010 test machine). Has anyone successfully swapped out their drives and not had to deal with a system fan on Afterburner mode?
    Note: on my test mac mini, I tried SMC fan control as well as SSD Fan Control apps and neither is able to change the fan RPM.
    SMC Fan control (this is what I use on my macbook)
    https://www.macupdate.com/app/mac/23049/smcfancontrol
    SSD Fan Control: (suggested by others with similar thermal sensor/fan problems)
    http://exirion.net/ssdfanctrl
    * the position of the thermal sensors on the factory hitachi's is apparently important. In a test, I moved one a few millimeters and the fans defaulted to full speed.
    Cheers!
    Ken

    I replace the HD on my 2009 Mini with no fan problems.
    From your description I think yo have either a sensor or logic board problem. If the sensor was not attached to the HD and was "cold" then the fan speed would not increase if the HD got hot.
    When you played around with sensor position what what the temperature  of the sensor when you go the "right" fan speed and the runaway speed.

  • Airdrop - Mid 2010 Mac Mini - Upgraded to OS X Yosemite

    I upgraded my Mid 2010 Mac Mini to Yosemite yesterday and thought I'd try using Airdrop to send a file to my almost brand new IPad with OS 8. Airdrop is listed in Finder on my Mac Mini but when I open it it doesn't find my iPad but the screen states "Airdrop let's you share instantly with people nearby. To share with someone using a Mac, ask them to go to Airdrop in the Finder".  If alternatively I right click on a document in Finder and select 'share' the Airdrop option is there but greyed out and if I click on Airdrop a message appears stating "To share with someone using a Mac, ask them to go to Airdrop in the Finder" - no mention of what to do if you want to share with an iPad. I have Bluetooth and Wi-Fi switched on on both devices and have the Airdrop status set to Everyone on the iPad.  On the Mac Mini in settings - extensions - share menu, the Airdrop box is white with black tick whereas other tick boxes are blue with a white tick. Does all this mean that my Mac Mini even with Yosemite can't operate Airdrop at all or maybe only with another Mac (maybe it's too old)? Or maybe I'm missing something?

    You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

    I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
    1) After starting up, I get the usual gray screen with Apple logo.
    2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
    3) I follow this instruction, but get the same dialogue box over and over agin.
    Any ideas?
    Thanks and best wishes.

    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Sound toggles on and off when I hit the "0" key on a 2010 Mac Mini.

    Whenever I hit the zero key on an Apple keyboard using a 2010 Mac Mini, the sound toggles on and off.  It does not happen when I use the keyboard with a 2012 Macbook Pro.  There can be times when the sound toggles when I am not even typing. I upgraded to Mountasin  Lion, but this did not resoilbve the issue.  I have disabled remote control.
    Thanks to all for your help.

    Hi John,
    That's often a sign of a bsad Capacitor in the Power Supply, but...
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • I updated iTunes on my Mac mini power pc and it nolonger works with my ipod. I can no longer manage my music.

    System SW said there was a new iTunes update so I updated and now I can't sync of manage my music on my iPod?
    Mac min Power PC
    Thanks,
    Ken

    In iTunes go to View>Show Sidebar.

  • I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

    I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

    The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

  • 2010 Mac Mini, Front Row and 5.1 Audio

    I recently bought one of the new 2010 Mac mini's for my home theater. I have video going to my TV through HDMI. (I do not use the TV for audio.) I'm feeding audio to my receiver via optical. The problem I'm having is with 5.1 audio through Front Row. I've installed Perian and enabled AC3 passthrough. 5.1 audio works great when I play a video in iTunes (it also works with eyeTV). When I try to play the same movies through Front Row, I'm stuck with stereo audio and see no way to change it. Any ideas?
    Thanks in advance!

    I too have the latest mini, hooked up to a Denon receiver via pass-through HDMI.
    I am not an audiophile in terms of setting up this stuff and just want to know what I need to do to get the optimum performance out of this mini, audio wise.
    When I go to Audio MIDI Setup app, my receiver (DENON-AVAMP) is listed next to the "source" button. I have no clue about channels, bits, etc. When I click on the "Configure Speakers" button I am presented with different configurations so I selected "Multichannel" versus "Stereo". And I can see where you can test all 5 speakers and subwoofer, but I just don't know which "format" I am supposed to select.
    The 5.1 mapping is shown when I select 8 channel/16 bit, 8 channel/20 bit, or 8 channel 24 bit. I can click on each speaker in this map and it tests properly no matter which one of the above combinations I select. Just not sure which one I am supposed to be using.
    All I know is my Denon is a 5.1 system and all this works perfectly (getting 5.1 sound) with my Playstation 3 hooked up the same way to the Denon.
    Does anybody know the correct settings to output 5.1 sound from this Mac Mini?
    Thanks guys!

  • 2010 Mac Mini display and network issues after Mountain Lion installation

    I just installed Mountain Lion on my 2010 Mac Mini, but now the display won't work and it isn't showing up on my network.  I have it hooked up to my TV (I don't have another screen for it) via HDMI.  Also, I've mainly used this computer by using the share screen function with my laptop, so I don't have a keyboard or mouse for it either.  The Mini is no longer showing up on my laptop's network list...  Any suggestions?

    I would see if you borrow a USB keyboard and mouse
    from some one, because otherwise trouble shooting the
    problem will be next to impossible as sometimes the fixes
    and diagnostics require the keyboard (PRAM reset, Hardware
    Test, etc.).

  • 2010 Mac Mini and HDMI question

    Just bought a new Mac mini and have it hooked up to a Samsung px2370 HDMI to HDMI and as good as the picture looks I'm thinking it could look better ... And I've heard that generally a computer shouldn't be hooked up that way... The Mac mini has another mdp and the Samsung has dvi also, what are my options? All these adaptive have me stumped... Plus like I've heard On another thread the mini is thinking I have a television hooked up... Plus when the monitor was on 16/9 the menu bar was not visible and I changed it to screenfit on the monitor which worked but should I of kept it on 16/9 and adjusted it with underscan? Plz help

    It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

  • 2010 Mac Mini and OSX Lion

    Hi Everyone,
    Hoping I can get some advice.
    I have a 2010 Mac Mini and am thinking about upgrading to OSX Lion.
    Although I know my Mac meets the system requirments (Intel Core 2 Duo, 2Gb RAM), I was wondering what the performace is like on with these specs.
    I mainly use my Mac for iTunes, Safari, Twitter and iPhoto if that makes any difference.
    Thanks!

    It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

  • Why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    I'm thinking that you have a > Mac mini (Mid 2011) - Technical Specifications because the 2010 model's only have Core 2 Duo processors and the 2011 had the first i5 processor. 
    2 GB of RAM is the minimum requirement for Mountain Lion, but it's hardly enough to really enjoy doing anything else.
    see > Memory and Free Installation Guides for Apple Mac Mini
    Plus I don't have any problems running Mountain Lion and a load of App's on my 2010 Mac Mini with 8GB of RAM.

  • 2010 mac mini - monitor goes dark every few sec's problems since Mavericks Install

    My Wife updated her 2010 Mac mini from Mountain Lion to Mavericks and ever since, after start, up the display  intermittently flashes a dark screen, every few seconds.  (within 3-10 seconds or so, there will be another period of dark screen, that may last aprox. 1- 6 seconds.  The timing of this changes constantly.  The finder and all apps I have seen are affected in the same way. it seems to be an all-the-time problem
    the monitor is an OptiQuest Q9, and the system connects via an Apple mini display to VGA adapter (supplied with the mac mini) , then a vga cord into the monitor, which has a native resolution of 1280 x 1024.   
    The only workaround we have found is to boot the mac with the monitor cable disconnected, then reconnect the monitor cable after boot up is complete. In that case, the monitor does not flash, until the mac is shutdown or restarted again.
    Steps I have already tried:
    Zapped P-Ram 
    Reset SMC (shutdown, waited with power unplugged, then reattached power and  rebootted
    Repaired disk permissions,
    repaired disk
    re-download and reinstalled mavericks fresh.
    changed display prefs for resolution, detected displays, etc. 
    Changed background picture.
    I don't know where to go with this anymore, and it has already taken a lot of time.
    Who's got a Fix?    And if there is no fix, how do I revert from Mavericks to Mountain Lion?   The mac mini came with Snow Leopoard.

    Problem Fixed!
    I found another page that referred to resetting the PMU (http://support.apple.com/kb/ht2183) , which controls things like wake and sleep:
    "If the settings in the PMU become corrupted, it can result in operational anomalies such as your computer not turning on, not displaying video, or not waking from sleep, among other things. In these situations, you may need to reset your computer's PMU."
    Anyway, it is pracitcally the same proceedure as resetting the SMC (SMC reset=  Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
    but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
    After this the display problem was fixed, but the fan ran at high speed, so I did one more SMC reset as described above. Now everything is in order.   This also fixed the issue of the mac mini not waking from sleep unless the power/sleep button on the mini was pressed (it wasn't responding to the keyboard to awaken). Now it's all good.
    Hope this helps somebody else... 

  • 2010 mac mini RAM error

    I have a 2010 mac mini and it is displaying that I only have 1gb of ram, but it should display that I have 2gb. Please help!!

    Do a proper shut down from the apple menu
    Then flip the mini upside down and open the bottom cover
    check and see if there are 2 ram DIMMs installed
    if there are, I would take them out and swap their positions
    http://www.youtube.com/watch?v=m5uvIBpTSaQ
    Then do a pram zap by holding down these keys on power on:
    COMMAND OPTION P R

Maybe you are looking for

  • Computer crashes in the middle of games

    i just got a new hp mini 110-3000 and i bought world of warcraft for it.  when i first started playing it everything was fine,except it was a little slow because i didnt have enough ram but i fixed that by upgrding to 2gb instead of 1gb. now everythi

  • What are the extra 13 paritions? root user security concerns?

    I [was] running Yosemite 10.10.3 on a Late 2014 iMac Fusion Drive SSD and HDD This might be a bit confusing, and I need assistance from someone who really knows what they're talking about here. When messing around trying to secure my system, I enable

  • What can I do about error code  w_ADEPT_CODE_EXPIRED

    I cannot move library books to Digital Reader  Eror code  W_ADEPT_CODE_EXPIRED  comes up.  How do I fix this?

  • InDesign CS5.5 crashes while applying Template to a page

    Hi, We installed Adobe InDesign CS5.5. on 10 Windows XP SP3 32-bit workstations with 2 GB RAM. On every computer, when a user tries to apply a template to a page in a .indd document, InDesign immediately shuts down without displaying any error messag

  • Unknown error code during application install: "-2...

    Skype stopped working about 2 months ago on my HTC One, Android version 4.4.2. It had been working for some months, but it started giving an error code that I have long forgotten. I de-installed Skype and then tried to re-install from the Play Store.