2010 Mac Mini sound skipping

Have a 2010 Mac Mini Server 4 GB RAM 2.66 Ghz running OSX Server 10.6.7.
Ever since I purchased in February 2011, the machine has had skipping audio regardless of the source - You Tube or other internet streaming, local quick time movie playback, i-tunes, you name it - it ihas audio skipping and stuttering.
I also have two 2nd Gen Apple TV's that run via Home Share from this Mac Mini. There are no audio problems when the Apple TV's playback movies or music. Perfect playback.
My Mac Mini is connected to my LCD TV directly via HDMI. Have tried various different resolutions. Is this a driver problem with the Mac Mini, an interface problem with the HDMI, or what? It is a very annoying problem that ruins the Mac experience for a family that has just cast off windows completely to go Mac!
Please help!
Wondering if this could be a PAL/NTSC problem. I am an American living in Sweden and purchased the Mac Mini in the US while on vacation. The PAL 50 Mhz setting is greyed out in the display preferences. Could this be a part of the culprit?

Hey David,
My issue was resolved by ensuring that I was using a PAL resolution and frequency (720p @ 50 Hz or 1080p @ 50 Hz) for my PAL TV. Anything else causes audio stuttering through my HDMI cable.
Don't ask me why. Try this on your setup by using only the one of your TV's native resolutions and frequencies (Should say NTSC Television on every native TV resolution if you are in the US, PAL Television in Europe). If you do have an NTSC TV, then you might be able to use all of the 60 Hz frequency resolutions without HDMI audio out problems, but I wouldn't count on it.
From what I've researched on the issue, it is only TV's that have this problem, and it is a strange one, as it is actually a display setting problem with an audio error symptom.

Similar Messages

2010 mac mini Home cinema sound and Home cinema headphones

Hello
im waiting for my 2010 mac mini to arrive,
ive experience with home cinema setups in the past.
Im looking to use my mac mini as a home cinema set up.
Im fine with the visual side ( projectors and hdtv).
The audio.
How on earth do i get home cinema sound into headphones.
due to where i live, headphones are the only option i have ( neighbours dont like noise.)
ive tried :-
sony mdr-drs7100
Pioneer SE-DRS3000c
pioneer dir-8000c.
the three above are ok as they have home cinema audio processing built in and worked with the optical digital output fine.
bass on the above 3 is weak.
i aso will prefer a wired set of headphones ( had enough of wireless)
im now looking at another route.
1) a decent headphone amplifier capable of playing DTS and Dolby digital 5.1
2) decent set of headphones to handle the above.
anyone any setups they can share that work
many thanks

Hey David,
My issue was resolved by ensuring that I was using a PAL resolution and frequency (720p @ 50 Hz or 1080p @ 50 Hz) for my PAL TV. Anything else causes audio stuttering through my HDMI cable.
Don't ask me why. Try this on your setup by using only the one of your TV's native resolutions and frequencies (Should say NTSC Television on every native TV resolution if you are in the US, PAL Television in Europe). If you do have an NTSC TV, then you might be able to use all of the 60 Hz frequency resolutions without HDMI audio out problems, but I wouldn't count on it.
From what I've researched on the issue, it is only TV's that have this problem, and it is a strange one, as it is actually a display setting problem with an audio error symptom.

Sound toggles on and off when I hit the "0" key on a 2010 Mac Mini.

Whenever I hit the zero key on an Apple keyboard using a 2010 Mac Mini, the sound toggles on and off. It does not happen when I use the keyboard with a 2012 Macbook Pro. There can be times when the sound toggles when I am not even typing. I upgraded to Mountasin Lion, but this did not resoilbve the issue. I have disabled remote control.
Thanks to all for your help.

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

2010 Mac Mini, Front Row and 5.1 Audio

I recently bought one of the new 2010 Mac mini's for my home theater. I have video going to my TV through HDMI. (I do not use the TV for audio.) I'm feeding audio to my receiver via optical. The problem I'm having is with 5.1 audio through Front Row. I've installed Perian and enabled AC3 passthrough. 5.1 audio works great when I play a video in iTunes (it also works with eyeTV). When I try to play the same movies through Front Row, I'm stuck with stereo audio and see no way to change it. Any ideas?
Thanks in advance!

I too have the latest mini, hooked up to a Denon receiver via pass-through HDMI.
I am not an audiophile in terms of setting up this stuff and just want to know what I need to do to get the optimum performance out of this mini, audio wise.
When I go to Audio MIDI Setup app, my receiver (DENON-AVAMP) is listed next to the "source" button. I have no clue about channels, bits, etc. When I click on the "Configure Speakers" button I am presented with different configurations so I selected "Multichannel" versus "Stereo". And I can see where you can test all 5 speakers and subwoofer, but I just don't know which "format" I am supposed to select.
The 5.1 mapping is shown when I select 8 channel/16 bit, 8 channel/20 bit, or 8 channel 24 bit. I can click on each speaker in this map and it tests properly no matter which one of the above combinations I select. Just not sure which one I am supposed to be using.
All I know is my Denon is a 5.1 system and all this works perfectly (getting 5.1 sound) with my Playstation 3 hooked up the same way to the Denon.
Does anybody know the correct settings to output 5.1 sound from this Mac Mini?
Thanks guys!

2010 Mac mini to yosemite

I am considering my 2010 Mac mini to Yosemite, is there any benefit

There have been varying reports it sounds like on saving the installer package so you can avoid redownloading 5GB installer to use again on same or multiple Macs you have.
From MacIntouch:
The procedure for making multiple installs from one download is the same as earlier download only upgrades.
After the massive 5+ GB download, the first screen is the launch of the installer.
Go to the "file" menu and quit then, before anything else.
Look in the applications folder for "install OSX yosemite" app or such.
Make a copy somewhere else.
The installer deletes this one when done.
You then make copies to other machines for installs there.
Be sure to use copies, as the installer deletes each when done.
http://www.macintouch.com/readerreports/yosemite/index.html

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

2010 mac mini - monitor goes dark every few sec's problems since Mavericks Install

My Wife updated her 2010 Mac mini from Mountain Lion to Mavericks and ever since, after start, up the display intermittently flashes a dark screen, every few seconds. (within 3-10 seconds or so, there will be another period of dark screen, that may last aprox. 1- 6 seconds. The timing of this changes constantly. The finder and all apps I have seen are affected in the same way. it seems to be an all-the-time problem
the monitor is an OptiQuest Q9, and the system connects via an Apple mini display to VGA adapter (supplied with the mac mini) , then a vga cord into the monitor, which has a native resolution of 1280 x 1024.
The only workaround we have found is to boot the mac with the monitor cable disconnected, then reconnect the monitor cable after boot up is complete. In that case, the monitor does not flash, until the mac is shutdown or restarted again.
Steps I have already tried:
Zapped P-Ram
Reset SMC (shutdown, waited with power unplugged, then reattached power and rebootted
Repaired disk permissions,
repaired disk
re-download and reinstalled mavericks fresh.
changed display prefs for resolution, detected displays, etc.
Changed background picture.
I don't know where to go with this anymore, and it has already taken a lot of time.
Who's got a Fix?    And if there is no fix, how do I revert from Mavericks to Mountain Lion?   The mac mini came with Snow Leopoard.

Problem Fixed!
I found another page that referred to resetting the PMU (http://support.apple.com/kb/ht2183) , which controls things like wake and sleep:
"If the settings in the PMU become corrupted, it can result in operational anomalies such as your computer not turning on, not displaying video, or not waking from sleep, among other things. In these situations, you may need to reset your computer's PMU."
Anyway, it is pracitcally the same proceedure as resetting the SMC (SMC reset= Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
After this the display problem was fixed, but the fan ran at high speed, so I did one more SMC reset as described above. Now everything is in order.   This also fixed the issue of the mac mini not waking from sleep unless the power/sleep button on the mini was pressed (it wasn't responding to the keyboard to awaken). Now it's all good.
Hope this helps somebody else...

Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media? I have not figured this out. Here's what I have observed:
I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts. A USB stick formatted as described does not appear in th boot menu at all.
An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
Thanks.

The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD. It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

Can I replace the optical drive on a 2010 mac mini with a second hard drive?

i was just wandering how easy it would be (if at all) to replace the optical drive on my 2010 Mac Mini with a second hard drive
we use it as a media server only, and the DVD is almost never used

http://eshop.macsales.com/shop/drive_bracket/datadoubler/

Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
1) After starting up, I get the usual gray screen with Apple logo.
2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
3) I follow this instruction, but get the same dialogue box over and over agin.
Any ideas?
Thanks and best wishes.

If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
Thanks

Allan Eckert wrote:
Hi GrainFocuser;
Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
You might have better success with your alternatives if you post over on the server forum instead of here.
Allan
Message was edited by: Allan Eckert
Allan, thanks.
It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
So, again... Any options from OS X Server Admins out there?

2010 Mac mini server remote install OS X failure

I tested re-installing OS X remotely to my 2010 Mac mini server. It worked the first time. I got to the installation process, and abandoned it without actually doing anything.
But when I tried again, it failed, and I have not been able to get it to work ever since. I went to a local Apple shop and tested at its Genius bar. People there cannot figure out the problem. They exchanged my unit for a new one.
I took the new unit home, tried, and it failed again. Then I called Apple Care. They cannot pin-point the problem, but suspected that, since I failed with two units, the problem may be with the computer that has the DVD. I am not sure about his. Here I post my story for help. The details:
1. The OS X Server installation DVD (which came with the mini) was put in a 13" 2009 Macbook Pro. There I ran the Remote Install OS X application. Selected the Installation DVD.
2. Then I started the Mac mini server, holding the down Opt key. The Installation DVD appeared from my local network. However when I selected the DVD and clicked the arrow sign under it, things went wrong. A circle with a line segment appeared briefly (indicating a problem, I think). Then the mini simply went to boot from its own hard drive where the original OS X was.
Help and suggestions are very much appreciated.
Additional information:
Remote Disc works fine. From my Mac mini, after booting into the original OS, I can see and open DVDs in the Macbook Pro.

Target disk mode method works fine. I can boot my mac mini from its installation DVD placed in my macbook pro, connected to the mini through firewire. So I don't think there is any hardware problem.
I played with a few other things. First I used another DVD, this time the one that came with my 2009 macbook pro, a non-server version OS X. When I tried to remote install it to my mini, the mini can still see the DVD but it hung after I chose to boot from it. It just showed a big circle with a line segment. It did not revert to boot the OS on its own hard drive.
Next I again ran remote install on macbook, but booted the mini to its own hard drive. From there
I changed its start up disk to Network Startup, and rebooted. The mini can find nothing on the local network.

2010 Mac Mini OS 10.10.1 screen is stretched out

Hi,
I have a 2010 Mac Mini that I use at work and I also use a second monitor via an adapter through USB. The setup worked until I installed Yosemite (10.10.1) on Friday.
When I go to Settings / Displays I don't get all the resolution options I had before (for my main monitor, 20", res. 1680 x 1050) and my secondary monitor isn't recognized at all (as if it wasn't even connected).
This is my main monitor: http://www.pcworld.com/product/1417007/lg-l203wt-widescreen-lcd-monitor.html
I've tried resetting the PRAM but that didn't work. I'm a designer and I can't work with my screen stretched out.
Can anyone let me know if there is a way to fix this???
Thanks in advance!

Look for update software for the USB video adopter.
The 2010 mini has an HDMI video adopter and came with a HDMI to DVI adopter, It also has a mini displayport video output. You can get an adopter to connect HDMI, DVI and VGA,
Mini DisplayPort with support for up to 2560-by-1600 resolution
HDMI port with support for up to 1920-by-1200 resolution
DVI output using HDMI to DVI Adapter (included)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Support for extended desktop and video mirroring across both ports

2010 mac mini RAM error

I have a 2010 mac mini and it is displaying that I only have 1gb of ram, but it should display that I have 2gb. Please help!!

Do a proper shut down from the apple menu
Then flip the mini upside down and open the bottom cover
check and see if there are 2 ram DIMMs installed
if there are, I would take them out and swap their positions
http://www.youtube.com/watch?v=m5uvIBpTSaQ
Then do a pram zap by holding down these keys on power on:
COMMAND OPTION P R

2010 Mac Mini sound skipping

Similar Messages

Maybe you are looking for