2010 Mac Pro for FCP work: ATI 5770 or 5870? performance vs. fan noise

I'm planning to swap my old Mac Pro (2006 2 x 2.66 GHz Dual-Core Intel Xeon, 4 GB RAM, NVIDIA GeForce 7300 GT) for a 2010 Mac Pro model, because I need more speed for video (FCP 7, Color, Magic Bullet Looks) and photo (Lightroom 3, Photo Shop CS5) work. I'm thinking of the 6-Core (3.33 GHz) Mac Pro with 24 GB RAM and ATI Radeon 5870. I read a first review which said, that the 5870 is VERY noisy (fans), and now I'm little afraid. Is the 5870 really that loud, and will it bring clear advantages over the ATI 5770 (I dont't do 3D work yet)? I'd really appreciate your help. Thanks in advance.

Our showroom unit arrived 8/24.
Set it up and loaded it with my demo content. Motion rendering is noticeably faster.
I have yet to thrash it hard, but it's certainly no louder than its predecessor as far as I can tell.
EDIT: I see that you are in Germany. Where exactly?

Similar Messages

  • 2010 Mac Pro for video work: ATI 5770 or 5870? performance vs. fan noise

    I'm planning to swap my old Mac Pro (2006 2 x 2.66 GHz Dual-Core Intel Xeon, 4 GB RAM, NVIDIA GeForce 7300 GT) for a 2010 Mac Pro model, because I need more speed for video (FCP 7, Color, Magic Bullet Looks) and photo (Lightroom 3, Photo Shop CS5) work. I'm thinking of the 6-Core (3.33 GHz) Mac Pro with 24 GB RAM and ATI Radeon 5870. I read a first review which said, that the 5870 is VERY noisy (fans), and now I'm little afraid. Is the 5870 really that loud, and will it bring clear advantages over the ATI 5770 (I dont't do 3D work yet)? I'd really appreciate your help. Thanks in advance.

    I've got the 6-core w/5870 on order, so don't yet have it myself. I've been looking into this issue also, as noise is a concern.
    This (http://techpowerup.com/reviews/ATI/RadeonHD5870/29.html) test showed me that the card is pretty typical at idle, but fairly loud when loaded.
    I don't expect I'll be loading my video card much with the work that I do right now, so wasn't as concerned. In the end, I guess I'll find out when my new machine arrives.
    Mark

  • Imac vs mac pro for FCP?

    Hello folks,
    Well, my G5 apparently needs a new logic board. I could cry, or be happy at the excuse to get a new computer... I chose the latter!
    Bottom line, what is the consensus regarding imac vs mac pro.
    I will be using FCP a lot, that's what I do for a living. However, I rarely run other applications at the same time. Occassionally LiveType or Photoshop, but that's about it. No Motion, no After Effects, etc.
    I feel that an imac will suffice nicely and that the mac pro is overkill in both cost and amount of computer. It's like getting an Indy car and driving 40 MPH!
    Thoughts? Thank you.
    Eric P

    hmmm, interesting. Of course the mac pro would be better, no doubt. But for my purposes I still wonder if it's worth the cost.
    As for Kevan D's inquirey for more info, yes I work with FCP for a living, at least 50% of my work week maybe more is editing. However, silly little ol' weddings have become the vast majority of my work and they will continue to be for at least a few more years I believe. In that time I do not see HD being a factor in my area. So for the forseeable future I expect to be working soley with SD. That bit of info may change some of your minds to thinking that an imac will suffice.
    I admit, that's my hope because I would have to take out a loan for the mac pro, and again, I'm just not certain it's worth it for my purposes. On the other hand, I didn't ask the question so that I could hear what I "wanted", I do want honest opinions from other professionals like yourselves. If the experience is that an imac just isn't worth it then so be it.
    As far as expandability (is that anything like drinkability??), I understand that, but again for my purposes I suspect that by the time I need to expand to HD or to using the full benefits of a mac pro, a new computer (and equipment) will be in the order anyway. Does that make sense?
    Thanks again,
    Eric

  • Over from PC...Need help configuringing my Mac Pro for FCP

    Just made the move a few weeks to Mac. Bought a Mac Pro ( and 2 Samsung T240 monitors) and am upgrading components for use with FCP. I have been editing for about 10 years (mostly volleyball highlight films and fishing videos) in Premiere Pro. I am currently using the Sony Vx-1000 but will be purchasing either the Sony EX-1 or HVR-Z7U to shoot and edit in HD while still doing some work in SD. I do maybe two or three 40 minute videos per year and some other shorter projects. I edit mainly for friends and family....not as a business. Here are the upgrades which I will be doing:
    1. Add 6 GB Ram to the already 2 GB's for a total of 8 1GB chips
    2. Install a Decklink HD Extreme card
    These is where I need advice:
    STORAGE...
    I am reading lots about external hard drives for editing. I am assuming that FCP would be on the operating system drive and the scratch disk(s) would be firewire (800) drive(s). I also read somewhere that Time Machine is not designed to back up video editing machines. I do not know if that is true with the smaller amount of work that I do. That would probably change how my storage is set up if Time Machine will not be backing up my files.
    Overall I am a recreational editor and but would like a system that is current for editing in High Defintion (and I guess Standard Definition at times.)
    Any advice would be much appreciated and I am really looking forward to the "Mac Experience"
    Thanks
    Kirk

    Thanks for that Nick and Jerry.
    I now think that the external hard drive posts that I was looking at were for machines that did not have the capability of adding internal hard drives.
    I actually have ordered a 1TB Samsung HD103UJ SATA2 32M (as per the Barefeats tests). Hoping that it would be a suitable internal dive.
    For the small amount of editing I do I am guessing that doing a raid would not be all that necessary.
    And Nick, I do not think that I was looking for a bootable drive for Time Machine, just something that has a copy of my video clips from my different projects in case I have some sort of hard drive incident. I understand how running Time Machine during editing would not be a good idea, but would it be ok to use it to back up my video files if I just ran it each night after editing. I am taking it that FCP has an auto save feature also for my projects backups.
    I had actually already ordered a Iomega Prestige 1 TB USB 2.0 3.5-Inch Hard Drive for the time machine drive. Should I be getting a firewire drive for that instead of USB?
    This is a brave new journey.....but I am really enjoying it.
    Thanks agian
    Kirk

  • New Mac Pro for FCP - should I do 8 cores or faster clock?

    I'm setting up a FCP station to replace a 2.3 GHz dial G5 and I'm wondering which would be better - an 8-core 2.26 GHz or a 4-core 2.93 GHz Mac Pro.
    Right now the G5 is most likely to choke up when rendering/auto rendering within FCP.
    Based on price and the trends in parallel processing, I'm guessing I should go with the 8-core, but that old-school MHz addict in me keeps second guessing. I'd appreciate any advice/insights!

    American Flannel wrote:
    I heard the new four core mac pro dusts my 2.8ghz 8 core in benchmarking
    That's not exactly true. I've been doing some research in the past 24 hours and it seems that the benchmarks (like Geekbench) in which the new 4-core "dusts" the previous 8-core are those which include memory tests. Memory tests will run much faster on the new Nehelems because they use faster RAM.
    But the early 2008 8-cores are scoring higher on some benchmarks which score single and multi threaded tasks and don't get hung up in cumbersome RAM tests.
    As for the current 4-cores versus the current 8-cores, it seems that the 2.96 GHz 4-cores are beating the more expensive 2.26 8-core procs in single-threaded operations. In FCP, only Compressor is optimized for multithreading, so I'm guessing the real benefits of the extra cores won't be visible until both snow leopard and a new version of FCP.
    Why a new version of FCP? Because from what I've gleaned, Grand Central will not make single-threaded operations run better, but will give developers tools to more easily utilize parallel processing. So it would seem FCP will need a significant upgrade to take advantage of what 10.6 has to offer. Don't know if it'll be a .5 or a full version upgrade, but I'm betting on one of them.
    Please don't take this as gospel... if I'm wrong about any of this, I'd love to hear a contrary opinion.
    Message was edited by: Rey Mo

  • From iMac to Mac Pro for video work.. suggestions please!

    Hello all! Soon I'll be upgrading from my 2.66 GHz quad core iMac with 4gb of RAM to a new Mac Pro. The idea is to increase my productivity with applications such as After Effects & Final Cut Pro by hopefully decreasing time spent rendering/buffering/burning. The iMac has been working really well all this time, but a bit faster would be better!
    I have about $4,000 to work with for a new machine. I welcome your thoughts on the best bang for my buck, be that a new/refurbished from Apple or used from eBay. Thanks everyone!

    The Hatter has provided his insights as well as some excellent links.
    The performance of the 2009 and later models is nearly twice that of the previous models with the same specs due to architectural changes including Hyper Threading.
    All the Xeon Macs are keeping their value very well, and that means there are very few real deals on eBay.

  • Which Mac Pro for FCP?

    I'm considering purchase of a new Mac Pro, hoping that it would allow more real-time playback of our DVPro 50 edits and faster rendering and compression. I'm also considering purchase of a video card for export to DVCAM and Beta SP. Can anyone help us with advice on what kind of configuration would be best? Thanks in advance.

    Hi Gerret,
    I would opt for the base Mac Pro model over the higher clocked BTO models and put the saved money into adding more memory and- storage.
    The card choice absolutely depends on your (input/output connection) needs.
    Some DVCAM decks have Firewire in/outs so this would require no card at all.
    If you really only need SD i/o then Blackmagic is the only remaining vendor to offer SD-only cards.
    http://www.blackmagic-design.com/products/sd/
    Depending on the video i/o interfaces on your deck(s) there are two cards available for PCIe machines (like the Mac Pro):
    $595 DeckLink SP (analog only)
    $895 DeckLink Extreme (analog + SDI)
    AJA has the external Io / Io LA / Io LD boxes available.
    I can only talk about the Io though. It has great quality, a plethora of in/outputs but sets you back quite a bit, moneywise.
    http://www.aja.com/html/productsIoIo.html
    http://www.aja.com/html/productsIoIoLAD.html
    Maybe you should consider getting a HD capable card, though.
    Blackmagic's HD cards start at only $100 more than the SD-only DeckLink Extreme and you would be 'future-proof' then (if that's possible at all
    Best regards, Oliver

  • MAC Pro 12 Core using ATI 5770

    Why would and HD video be cutting while playing on such a machine with 12GB of GDDR2 SDRAM?

    GDDR refers to Graphics DDR, not system
    12-core would be two 6-core processors
    All you need is really one good 4-core cpu
    12GB is fine though light for 12-core because  most such users need more and press it harder to do more.
    It may be where and what storage drives and their makeup and what else is running.

  • Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

    Hello to the community, I have run into an annoying issue.
    I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
    But everytime I download it, as I click to install, it gives me the message:
    Alert
    This software is not supported on your system.
    But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
    http://support.apple.com/kb/DL1320
    But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
    So I'm completely stuck.
    *Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer.  I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
    I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
    Some help would be greatly appreciated!
    I'm running OS X Mavericks 10.9.2
    mid-2010 Mac Pro
    8 core processor (2 X 2.4gHz)

    According to this article, your EFI firmware is up to date:
    Computer
    Model identifier
    EFI Boot ROM version
    SMC version
    Mac Pro
    Mac Pro (Late 2013)
    MacPro6,1
    MP61.0116.B04 (EFI 2.0)
    2.20f18 (SMC 2.0)
    Mac Pro (Mid 2010)
    MacPro5,1
    MP51.007F.B03 (EFI 1.5)
    Mac Pro (Early 2009)
    MacPro4,1
    MP41.0081.B07 (EFI 1.4)
    Mac Pro (Early 2008)
    MacPro3,1
    MP31.006C.B05 (EFI 1.3)
    Mac Pro (8-core)
    MacPro2,1
    MP21.007F.B06 (EFI 1.2)
    1.15f3 (SMC 1.1)
    Mac Pro (Original)
    MacPro1,1
    MP11.005C.B08 (EFI 1.2)
    1.7f10 (SMC 1.1)
    EFI and SMC firmware updates for Intel-based Macs

  • Best Video card for Mid 2010 Mac Pro

    I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
    Looking for suggestions, and links if possible to what you know works.
    Thanks!

    Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
    Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
    This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
    Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
    Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

  • DVD/Lightscribe drive for new (late 2010 Mac Pro?

    Does anyone know a source for an internal DVD w/ Lightscribe drive for a late 2010 Mac Pro? I want to install it in the second drive bay. I got one from OWC, but the depth of the DVD drawer was about twice that of the original drive that came with the Mac Pro. It would have been able to fit through the drop cover on the front of the Pro, but would not clear the internal rack components. It fit in the rack nicely with the 4 screws lining up properly, but would then not open more than about an eighth of an inch before hitting the internal rack frame, causing it to close. Thanks.

    Bummer! The instructions included with the drive did not mention thi. When I called OWC customer service she said that sometimes you had to remove the bezel from the Mac. I told her the Pro had no bezel. She said that the drive info did not specifically say it would fit a 2010 Pro a d gave me a RMA.'nmh bad for not questioning further. Thanks.

  • I have a mac pro for work and they made it log on windows at start up.  how can i switch back to Mac as well so i will use the i cloud fetures ?

    I have a mac pro for work and they made it log on windows at start up.  how can i switch back to Mac as well so i will use the i cloud fetures ?

    Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

  • Looking for Optical Bay Carrier Part # for 2010 Mac Pro?

    Hello,
    Was curious if anyone had the part # for the aluminum optical Bay Carrier for the 2010 Mac Pro / 8 Core?
    I have called Apple and they can't provide me with that info. Thank you

    I would suggest yo call one of the mac parts suppliers or repairers and see if they know the number or have the part.  Here's some suggestions:
    WeLoveMacs
    macpartsonline
    Mac-Pro

  • HT1151 2010 mac pro, my cable for my display won't fit,  mac pro 21 pin display 30 pin ?

    bought a 2010 mac pro.  My display will not match up to it
    my mac pro has 21 pins and my display has 30
    is their a adapter to fix this.   also usb and firewire don't match mine either
    Help want to set it up

    You need to provide more details as to what computer, what display, and what connector you have. USB and Firewire "don't match mine either" means what? Don't match what?

  • Mid 2010 Mac Pro 10.6.4 Does Not Log In

    This is both a MacPro question and an Avid ProTools question...first I need to get the Mac working again and then come up with a longer term ProTool solution....
    I am at a new job where I am currently running ProTools 8 using a Digidesign 003 on a Mid 2010 Mac Pro running OS 10.6.4.  There are two user accounts, and only one (the adminsitrator account) is marginally functional.  It runs extremely slowly (five minutes to launch GarageBand) and the application icons in the dock do not display correctly.  When attempting to log into the other account, after a few minutes a blue screen comes up and then it returns back to the log in screen. 
    I know that the computer would be compatabile with Mavericks OS 10.9, but I know that 10.9 is not reccomended for any Avid Product (even newer versions of ProTools).
    How can I make the computer operational while still running OS 10.6?  Do  I need to upgrade to a newer OS and take on the expense of upgrading to a newer version of ProTools?  What about compatability with the 003?

    it shipped with an OEM DVD of special build of 10.6.4 but you really need 10.6.8+ at least, or 10.8.5. Depends on if your apps still rely on older PowerPC and Rosetta.
    Software Update would have to be turned off it you are not already on 10.6.8 plus all the security updates and new Safari update and others.
    I like to have a safety net, clone your system, take the clone off line, then make updates and changes. And have two such backup working clone systems handy. In some cases you can just partition one drive to do that.
    Sounds like other issues. Invest in a 250GB or 500GB SSD for t he system. PCIe SSD card and SSD(s) for scratch and media libraries.
    Make sure it has 24-48GB RAM.
    ATI 5770 drivers really need 10.6.8.

Maybe you are looking for