2010 mbp mic not working

I have a mid 2010 13" macbook pro. After a logic board repair the internal mic doesn't work. The system recognises it but it picks up no sound at all. I've also tried an external mic that connects via the line in port and it suffers the same problem (recognised but no sound). Help???

Have you tried a PRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

Similar Messages

  • Internal mic not working after updating to 10.10.1

    After updating to 10.10.1 (from 10.10) on my MacBook pro 2010 (15” screen) the internal mic is not working when using FaceTime (or Skype) and so the person on the other end of the video/audio call is unable to hear me. On my end there is a static/crackly sound during FaceTime (or Skype) connecting  since the update which I believe is related to the mic problem (no sound input on Mac during FaceTime/Skype).
    HELP!!!

    I had exactly this same issue and and this workaround from Paul on another thread (Internal Mic not working for phone calls in Yosemite ) solved it :
    Make sure FaceTime App is not running
    Open Terminal
    type sudo killall coreaudiod
    Press Return
    Enter your computer's admin PW

  • IPhone 2G voice mic not working

    Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

    I had that problem with my iPhone 3G after about 5 days.
    I just had Apple take a look at it.
    They cleaned it out, called it and stuff.
    Didn't work.
    Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

  • IPad 2 3G 64 mic not working from factory, do you have any idea ?

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

  • Both internal and USB mics not working

    Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
    The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
    There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
    I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
    I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
    Does anyone have any idea what could possibly be wrong?
    For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
    http://animeutahime.com/temp/faultymicrecording.mp3
    iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

    Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
    One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
    Having said that, I really like to get my internal mic back up and running again.
    iBook   Mac OS X (10.4.10)   1.5gb RAM, 60gb hard disk

  • Ipod mic not working

    My Ipod 5th Gen mic not working

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
      - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Built in Mic not working on Imac Windows 7 boot camp

    I've been doing research and a lot of people seem to have problems with macbook pros mics not working for vista or XP. My current problem is on an Imac running Windows 7 32bit boot camp. The built in mic REFUSES to work be recognized or show any signs of picking up sounds. It won't work in Sound Recorder, Ventrillo or any program. Any help is appreciated if you need any more info let me know. Yes my mac is fully updated with both windows updates and mac updates.
    -Nick.
    Edit: I'm running an Imac Version 10.6.6 intel core 2 duo, 2.4GHz

    Same Here... is there any solution? i have 64 bit windows 7 and still the same problem.. external mics don't work either!

  • Iphone4 - MIC not working only on phone call, But in recording MIC works good

    My iPhone4 was working last 10 months till last week. it is bought from outside UAE and am Living in UAE
    When I make a call  , I can hear them clearly , but other side cant hear me.
    I think iphone MIC is broken, but fortunately I tried recording for 10 minutes, it is working perfectly. I felt hardware working properly
    Then I think it is software Issuebut,
    When I detected the issue software version was 4.3.3, And Then I updated software to 4.3.4. Still the issue remains.
    I tried several time restarting. No advantage
    After all I deleted all my content by resetting from phone and iTunes, bothways.
    Now my phone content looks like new iPhone and software is 4.3.4 and
    Still the MIC not working only on a phone call
    Unbelievable.
    I went to more than 3 apple dealers in Dubai, like istore,protech.. All they refused service for iPhone.
    They dont have service for iPhone, but they selling and are autherized reseller,
    My phone still under warranty.
    Do I get warrenty covering, or atleast it is serviced?
    Or could you have any trick to get it worked
    Trust you can help me.
    Thanks in Advance
    Nouf, Dubai

    I've been having the exact same problem! I tried restoring, updating, suing earphones but NOTHING.

  • System internal MIC not working in Hp Pavillion dv1000(model: dv1662ea)

    Hi, When i connect to internet, internal MIC not working when i go to the voice chatting . Please provide me a solution. My model # is HP Pavilion DV1000 Notebook PC Model: dv1662ea, O/S: WinXP SP2 
    Thx. .
    Vam

    i experiencing the same problem.. how did you resolved it?

  • X220 Internal Mic not working

    I had just get a new X220 in recent days.
    And I found the internal mic not working, I can not record any sound through Sound Record or Skype.
    I had tried all the following methods, but the mic still can not working. Anyone cound give me some suggestion ?
    1) update sound card driver to 8.32.23.2
    2) Fn+F6,  change between "only my voice" or "Multiple voice"
    4) UnInstall source card driver and use microsoft generic driver
    3) The method in http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-internal-mic-problem/td-p/435551/page/..., operate like :
       Start -> control Panel -> Sound
    Click on the "Recording" tab
    Click Internal Microphone to highlight it
    Click Properties
    Click the "Advanced" tab
    Uncheck "Enable audio enhancements"
    Finally, click the "Levels" tab and turn Microphone Boost to 0dB. (if you don't do this the noise will be even louder than before).
    Click apply.

    hey kitewind,
    welcome to the forums and since you have tested the microphone using microsoft generic drivers and i'm guessing it did not work; therefore the best action for you right now is to contact our tech support group via
    http://bit.ly/LNVsuppNum
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • EMU 0404 - audio technica ADG1 mic not working

    Have a E-MU 0404, Windows 7 64 bit. Headphones and audio outs working fine. Need help with mic issue. Mic not working with this headset or my other ones. Mic input ports working, as I tested with a traditional mic with phantom power on. The headset mics do work, tested them with computer inputs.
    Also bought and tried a mic preamp with no luck when plugging in the headset mic.
    Why won't the 0404 pick up my gaming headphone mics, and what can I do to fix this?
    Thank you in advance.

    jonathanwesley wrote:
    I'm really interested to know what settings i should have in the ASIO full duplex program
    it has
    INPUT
    X Asio Driver
    X Emu
    OUTPUT
    X Asio Driver
    X Emu
    the order is an issue, and whether or not they should be checked..
    Hmm... you shouln't use those ASIO drivers which are installed by Cubase installer (ASIO MME / ASIO DirectX).
    Since I don't know the version of Cubase you're using (a bit different device setup system in each version), I can only suggest you to select the "ASIO E-MU 0x0x | USB" driver (device setup) and then set up the I/Os and MIDI ports. You'll find information on how to do it by reading bundled Cubase guides (paper or PDF) ... if you don't have these guides, you'll get all downloaded from Steinberg's site:
    ftp://www.steinberg.net/Download/
    jutapa

  • My internal speaker on my MBP is not working

    My internal speaker on my MBP is not working. It appears as follows (screen). After connect the external speaker, sound is working. Yesterday after restart sound in internal speakers works but only a moment. Please advice.

        I'm happy to help with any of your wireless service needs. However, I'm having trouble understanding what you are attempting to do. Please clarify what you are trying to do and what issues you are encountering. Also, please include the model device you have.
    I trust once this additional information is provided we can better assist you.
    VZW_CS
    ^JB
    Follow us on Twitter @VZWSupport

  • [SOLVED]eeepc900 mic not working

    Ok so ever since i switch to linux (ubuntu, about 2 years ago) from xp (which it came with) the mic has not worked. Iv tried just about ever tutorial out there to get it fixed and when i switched to arch i thought maybe it would just magically become fixed so today i went to test it out and it didnt work (i used recordmydesktop, maybe its just that program?). I tried following every document in the wiki to get it working but none of them have worked. I found this thread https://bbs.archlinux.org/viewtopic.php?id=51912 and im running the stock kernal (besides the mic everything has been GREAT!) so im not sure why mine isnt working but others are without configuring anything. So any eeepc 900 users who had the same problem and fixed it somehow?
    Last edited by markbabc (2010-11-29 06:12:42)

    jasonwryan wrote:
    Worked out of the box on my 901 - have you set capture in alsamixer?
    https://wiki.archlinux.org/index.php/In … Microphone
    yeah i followed that and i found my mistake, i kept calling mplayer out.ogv to test if the recording worked and i didnt delete the original out.ogv so i was still testing one from when i didnt fix it. Everything is good now but thanks for the quick reply!

  • Live! Cam Voice (mic not working)

    Just bought Live! Cam Voice yesterday. Mic still not working properly even after verifying the installation. Please advise how to rectify.
    Thanks,

    Hi,
    Is there any chance you could upload the drivers from the cd for me please because creative dont currently support the camera.
    I can give it a trial run on my windows xp and give you some feed back after.
    Thanks,
    Rav

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

Maybe you are looking for

  • "Times" font not found. How do I fix this?

    Hey folks, it's me with another epic font problem. Windows XP environment, running Adobe Technical Communication Suite with Framemaker 8 and Acrobat 8 3D. Ever since upgrading to versions 8, we get this error when we make a PDF from Framemaker: +++++

  • My Macbook Itunes logo turned RED

    Hi , Would like to ask why is my Itunes logo RED. It suddenly happened when my mum tried to plug in here Ipad . Am a bit worried as am not familiar with Apple. Can anyone please help ? I don't own an Iphone and have never synced my Mac with anything.

  • Tab Set Label Colors - How do I change the selected tab label color?

    No matter what color I tell it to use for the Labels - Selected color I get white.  Is this a known bug in the system or am I not doing something correct.  I have a tab set component and a label based menu selector component on my display.  I've set

  • Download Java JRE problem

    This is what I receive from a webpage: Important Notice You are required to install/enable Java JRE for processing PPS online payment. Please press "Download Java JRE" button to install/enable Java JRE Please press "Reload" button after installed the

  • Netbeans beans binding

    __How TO Bind The Domain object Directly To Detail View ?__ when we create master detail table with netbeans .netbeans uses the following binding patern.bind the list to master table and master tables selected element to lists domain object how to us