2010 MBP15 SMS sensor Z-axis not working?
Hello all,
Today I downloaded the Seismac utility:
http://www.apple.com/downloads/macosx/math_science/seismac.html
The X and Y axis appear to be functioning normally but the Z-axis remains at 1.00g at all times.
I am somewhat concerned since this means that if I drop my notebook along the Z-axis this would mean that the drive wouldn't park its head to help mitigate damage to the platter.
So I want to ask other 2010 MBP15 owners to try the Seismac utility above and see if their Z-axis sensor works too.
About SeisMac
Turns your Sudden Motion Sensor-equipped laptop into a three-axis seismograph. perhaps you want to download:
http://www.macupdate.com/info.php/id/22428/seismacalibrate
Similar Messages
-
Exchange 2010 CAS Mailbox Re-direction / Proxying Not Working Properly
Hello Team
In my Exchange 2010 Lab Setup, CAS proxy is not working properly
In Site A : One DC , One HUb Server , 2 CAS Server (CAS ARRAY WIndows NLB), Mailbox Server 2 (DAG)
In Site B : One ADC one hub and CAS( Both are in same box) One Mailbox
Internal and External for SITE A on Server CASARRAY1.labbites.co.in is https://casarray1.labbites.co.in/owa and https://casarray1.labbites.co.in/owa
Internal and External for SITE A on Server CASARRAY2.labbites.co.in is https://casarray2.labbites.co.in/owa and https://casarray2.labbites.co.in/owa
DNS recory casarray.labbites.co.in is present
Internal and External for SITE B on Server INDLBGUEX01.labbites.co.in is https://indlbguex01.labbites.co.in/owa and https://indlbguex01.labbites.co.in/owa
The problem is occurs , whenever the second CAS server casarray2.labbites.co.in is down (Shutdown)
Now , when the user ifrom site A s trying to log in to the OWA with SITE B OWA LINK https://indlbguex01.labbites.co.in/owa it redirects to always https://casarray2.labbites.co.in/owa , since casarray2 server is down the OWA page
is not opening
My Question is Why the proxy re-direction is always going to second casarray2 server instead of casarray.labbites.co.in
how to correct it . please help me to over come the issueHi Albert
Thanks for you update
Get-mailboxdatabase | FT name, RPC*
Name RpcClientAccessServer
DB1 casarray.labbites.co.in
DB2 casarray.labbites.co.in
DB3 casarray.labbites.co.in
Site B Mbx -DB1 INDLBGUEX01.labbites.co.in
The user is administartor who beloings to DB1 and accesing the OWA from the SITE B CAS server link https://indlbguex01.labbites.co.in/owa
and it is redirecting to https://casarray2.labbites.co.in/owa
so as per the above
output , should i make RPCclientaccess server for Site B Mbx -DB1 as casarray.labbites.co.in -
IPad touch-screen sensor the does not work on one part of displey
I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronolaHad the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!
-
UMI 7764 second axis not working
I have a strange problem with my NI motion control setup and I wondered if anyone could help me.
I have the following setup:
PCI-7330 connected to a UMI-7764
Connected to the UMI-7764 I have two P70530 stepper drives, themselves connected to two Nema-23 stepper motors with shaft encoders wired back to the UMI-7764. All following the manual.
The 'Inhibit Input' switch is set to active high and the 'Inhibit output' switch is set to active low.
Both P70530 drives initialise (solid green LED). The stepper drive and motor connected via the 'Axis 1' terminals of the UMI-7764 works fine. The second one, connected via the 'Axis 2' terminals does not. When I attempt to start a motion via MAX, the motor audibly "clicks" once and then disengages. The drive then has a flashing green LED.
The motor will remain disengaged until I attempt a motion in the opposite direction, at which point the same "click" is heard and the motor is now engaged. No motion other than the vibration caused by the motor engaging/disengaging occurs.
Both drives and encoders are wired identically into the UMI. I have switched the cables with the drive that works, as well as the drives themselves and even the motors. The result is always the same; the drive/motor wired to 'Axis 1' works fine and 'Axis 2' "clicks" but doesn't move.
I'd appreciate any advice or suggestions anyone can provide, please.A bit more information in case anyone can help me:
Repeating the attempted motions in MAX for each axis I probed the poles of the UMI connected to the stepper drive. The results are below.
The Inhibit Input of Axis 2 seems to be always at 5V.
The 'Inhibit Input' switch on the UMI is set to active high and the 'Inhibit output' switch is set to active low. I would have expected, therefore, that reversing these switches would make Axis 1 stop working and Axis 2 start working. However, when I did this Axis 1 stopped working but Axis 2 continued the same behaviour (i.e. any attempted motion causes the motor to "click" and then disengage).
I also attempted to reverse the Inhibit Input action via MAX, but the option is greyed out.
Is there any reason why Axis 2 would be forced into having Inhibit Input at 5V? And, more to the point, is there a setting to stop it happening, or is this a hardware failure? -
SMS in Yosemite messages not working. "Not registered with iMessage"
Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
Thanks!Hi,
It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
There is one Error Messages that is seen that is known to be very similar.
This Error can only be fixed by Contacting Support.
What is does prove though is the The Apple ID in use can be rejected on a Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
It is called IDS: yourApple ID- Auth Token
If deleting this does not work try repairing the Keychain.
After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
Fixing and Apple ID/Account is free.
7:22 pm Tuesday; January 13, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
SMS in YAHOO mail not working in Firefox
In the drop down box for Yahoo Mail, Compose Message, if I click on SMS, it just turns a little blue and then sits there. Nothing happens. No SMS box, nothing. I was able to freely send and receive SMS messages up until about 3 days ago. It will not work in Mozilla Firefox, no matter what I do. If I go to Internet Explorer, it DOES work. I have the 9.0.1 Firefox version, which I updated to about 2 weeks ago.
Unless Yahoo changed something, which certainly is possible, the suggested approach is the usual:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove your Yahoo cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove your Yahoo cookies without affecting other sites.
Then try reloading the page and logging back in. Any improvement?
To rule out extensions as a possible culprit, could you try the site in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
''Flash and other plugins still run in Safe Mode''
After Firefox closes, a small dialog should display. Click "Start in Safe Mode" (''not'' Reset)
Any difference?
Some users have reported that older bookmarks or home pages do not redirect to the latest Yahoo server correctly. As a workaround, try accessing mail through the home page (www.yahoo.com or att.yahoo.com or whichever one it happens to be). -
Validity Sensors Fingerprint Reader Not Working
Hello,
I am running a Pavilion dv7-6c43cl, and I recently reinstalled Windows 8.1. The fingerprint reader is not working - I tried to configure it through PC Settings and the error was "An error occured processing your fingerprint". I installed drivers from people facing the same issue, as well as the drivers on HP's support page, and it didn't work. I tried uninstalling the driver, and rebooting to see if Windows would fix it - it didn't. I have no idea what to do, please help!
Thanks!aqua1234
You cannot run ProtectTools on this computer; ProtectTools Security can only be run on a business class system - the dv7 is a consumer notebook. Your dv7 is a nice notebook; it is a different kind of animal from a business class system.
=================================================
Next:
If you managed to install any piece of the ProtectTools program onto the computer, remove it, that is UNINSTALL the program.
After the you uninstall the program from Programs and Features, Shut down the computer to a dead stop (off), boot the computer and log in.
====================================================
Preparation:
You can continue to use the Validity Sensor Driver you have installed now. Should you need to reinstall the Driver and you lose track of it on your computer, you can retrieve a copy from your computer's Support Pages for Windows 8.
Reference:
HP Pavilion dv7-6c43cl Entertainment Notebook PC
====================================================
Next:
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Read the first page: Dragon Document Guidelines
Next:
Follow the steps in the Section titled:
Procedure - Update / (Re) Install HP SimplePass
NOTES:
You are using HP SimplePass Series 6 >> Ignore references to Series 8
You will be downloading and installing the Series 6 HP SimplePass program from the document.
=================================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
SMS Ukraine mobil is not working
I have Skype credit and subscription to Ukraine landline and mobile but the recovery is not getting messages and outbound calls are not working. Who can I chat with to resolve the issue?
HI,i don't know why i got a lot of prolems with skype after several days working ,please do the followings for me:
1- i am not able to contact or send message,because at thhis time asking for credit where as i applyed for free.
2- first i entered the sent sms code,but a notification said it is not reconize and for the secon time i tried the find the rlated location but i couldn'd find.
3- i coldn't find the skype number.
Hope everythings solved by skype help.thank you -
Macbook Pro 2010 Model Keyboard Issue - Middle keys not working
Hi.
I have a Macbook Pro 2010 model, for no other reason other than my cat sitting on it (tiny cat, very dry...) the middle row of keys (A,S,D,F,G,H,J,K,L) all stopped working, CAPS still works, as well as : ; " ' and the enter/return key.
I've done nearly everything I can think of, reset everything, reinstalled OS X... Other than pulling the thing apart.
Any suggestions or ideas of how I might fix this cheaply? Or what the problem may be?Hello AJTheGamer
Check with the Keyboard Viewer to make sure no other keys are being pushed down to prevent it from the keys that you are typing to be registered. Another thing you can check is to try and create a new user to see if the issue carries across the system as a whole.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/HT1199
Regards,
-Norm G. -
Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea
Hi,
I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
thanks
AlanI just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
I upgraded from VISTA to WIN7, that was where the problem occured.
My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
There is a known incompatibility with this update from HP and WIN7.
The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
NEXT
I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
Shut down and restart 2X.
I went back to the HP site and DL'd the DPIPS program for VISTA.
RUN > DPIPS program.
UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
Hope this works for you.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos! -
MO SMS control by SIm not working
Dear All,
I am using the EVENT_MO_SHORT_MESSAGE_CONTROL_BY_SIM and Terminal profile event. The handsets I am using are sending back the terminal profile event when occured but not sending the MO SMS control event.
Any hint???
I have registered it as following:
reg.setEvent(EVENT_MO_SHORT_MESSAGE_CONTROL_BY_SIM);
and the processtoolkit contains:
public void processToolkit(byte event) {
if (event == EVENT_PROFILE_DOWNLOAD) {
profileDownloadService();
} else if (event == EVENT_MO_SHORT_MESSAGE_CONTROL_BY_SIM) {
MO_SMS_proc();// the procedure to be executed
I treid many handsets and got the same result
Many thanks for the help
RegardsHi,
not with this little information
- which technology
- which browser version (if applicable)
- how to reproduce
- does it reproduce on other machines / browsers
Frank -
Problem with activation of Office 2010 Professional, 'help' web link does not work
I am having problems activating a copy of Office Professional 2010 purchased retail. I am being told that the product key is not valid, though I have re-entered it twice. I click on the 'more information' link but the page doesn't load: http://wwwppe.dns.microsoft.com/howtotell/geo/content.aspx?pg=geo_off&displaylang=en?ERR=0xc004c003&LCID=1033&MSG=4&PID=02257-210-6072776-49466&ErrorCode=0xc004c003
Please advise what I should do.
ThanksCould you please follow the instructions below, run the commands in green, and paste your output?
Open anelevated command prompt
a.The
path below is the default install path, so it may be different if you've customized your install
b.If
you’re using 32b Office on a 64b OS, you may need to run it from the “Program Files (x86)” folder
c.Start,
search for ‘cmd’, right click on the command prompt window and select “Run as administrator”
d.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /dstatusall
Trigger activation
a.Launching
an Office application will then prompt you for activation via the UI. Alternatively you can trigger it using this command:
b.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /act
Check the status
a.The
following command will show the licensing status. Alternatively in the Office UI you can view the status by clicking File, Help.
b.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /dstatusall
Ted Way [MSFT], Program Manager, Microsoft Office: Enterprise Licensing, Group Policy, and 64-bit Office -
Exchange 2010 OWA login page customization does not work
Where can I post a question regarding Exchange 2010 OWA login page customization? The customization worked before running updates, now all users navigating to the OWA page see the default configuration.
Hello,
You should ask in the
Exchange Previous Versions - Administration, Monitoring, and Performance forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Lync 2010/2013 simultaneous ring\call forwarding not working
Hello ,
I have Lync server 2010 and 2013 environment .I'm facing some issues with simultaneous ring\call forwarding when the call initiator is from outside of my organization.
For lync server 2013 ,i tick the option "Enable forward call history ".
For Lync server 2010 , i enabled the ReferredBySupported.
but when i checked the log, "history-info " still missing
Lync servers are updated with latest CU. the Gateway is SBC 2000 with sip trunk.
please advisePlease check if the correct voice policy and pstn usages are assigned to users. you can test if everything is in order using voice test case.
On client collect the tracing logs and see which voice policy user is getting what message the user get when call forwarding / simultanous ring is being tried -
Exchange 2010 (SP3 - withn SBS2011) OWA seach not working
I know such issues have been reported many times in the past, but I haven't found any report for SP3 (which actually thought would resolve this for good).
I had the same problem repeatedly with SP1, with SP2, with various rollups, I have tried the various vix solutions (re-touching AD schema, rebuilding the indexes etc.) and indeed they fix the problem... for a while.
Or until the next update.
Can someone help me reach a more stable solution?
Or is it a common issue that Microsoft actually cannot solve for good???
Right now I have the problem (again) after installing SP3. So I am open to all proposals.
NLSHi NLS,
I'm researching the issue and will update it soon.
By the way, for SBS issue, you can also seek the solution in the SBS forum, thanks:
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads
Frank Wang
TechNet Community Support
Maybe you are looking for
-
Multiple vendor line items in MIR7
Hi, Is there a way that I can post various vendor line items in MIR7 like the one in FB60 which is via complex posting? Thanks, Chaikaru
-
My ipod is displaying a usb cable at the top of it is itunes,i get a message on my computer saying the usb is not reconized.my ipod will not go back to the original when i unplug it from the computer, help
-
Hi Experts, I need to update Infotype 2002 (Employee Attendance) in travel request approval work flow. For that I am using set of standard BAPI 's "BAPI_EMPLOYEE_ENQUEUE" "HR_INFOTYPE_OPERATION" "BAPI_EMPLOYEE_DEQUEUE" But I am getting the error The
-
Pro v. Air for a biomedical grad student
Hi all, I'm starting grad school in a molecular genetics program and I'm in the market for a new Mac. I will use it mostly for writing documents and making presentations and I know the new Air meets these requirements easily. However, I also use prog
-
Why don't I have the Package feature in my CS6 version?
I have Adobe Illustrator CS6 but do not have the Package feature in my File menu. Does anyone know why this might be?