2010 to 2013 Public Folder Migration - PF work in OWA but not outlook Client, password prompt?

Hello All,
I have migrated all public folders from Exchange 2010 Sp3 to Exchange 2013 Cu7. You can access the public folders without any problems in OWA.
When trying to access in outlook i will get a password/username prompt. If i enter my details in this it will keep popping up even with the remember me button ticked.
When i check the connection status i see the below the status which is "connecting" is the PF; it will never connect.
I have done:
Reboots
Restart the Microsoft Exchange RPC Client Access service on the Exchange 2013 server
Tried changing the Logon network security in the outlook client which made no difference:
Tried logging into the outlook client as different user which made no difference
What else can i do please?
Help Appreciated!

Hi,
Please check if you have NTLM configured for Outlook Anywhere on your Exchange 2010.
Get-OutlookAnywhere | fl Identity,*auth*
And please check the server the public folder is trying to connect.
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

Exchange 2010 to 2013 Public Folder Migration -- Token Serialization

Here is the log entry,Failed to save admin audit log for this cmdlet invocation. Organization: First Organization Log content:Cmdlet Name: New-PublicFolderMigrationRequestObject Modified: f0daff33-6a93-4367-b609-662cfa0b92de\71fc0595-b5d7-4f15-8b7c-bffcefbd810fParameter: SourceDatabase = Public Folder Database Parameter: CSVData = VGFyZ2V0TWFpbGJveCxGb2xkZXJQYXRoDQpDb2JvY28gUEYsXA0KQ29ib2NvIFBGLFxJUE1fU1VCVFJFRVxBcg==...Caller: ExternalAccess: FalseSucceeded: TrueRun Date: 2015-07-07T12:41:45OriginatingServer: (15.00.0995.012)Error:Microsoft.Exchange.Data.ApplicationLogic.AuditLogAccessDeniedException: The requesting account doesn't have permission to access the audit log. --- System.Web.Services.Protocols.SoapException: The requesting account does not have permission to serialize tokens. at...

Hey Guys!
I'm in the process of testing a Public Folder migration from Exchange 2010 to 2013, I've been following the recommened migration scenario from Microsoft but have ran into this issue when running New-PublicFolderMigrationRequest. I let the request sit at a queued status for over 6 hours and then decided to look at the event logs. I'm receiving an access denied, requesting account does not have permission to serialize tokens.
Luckily this is just a test and not in a production environment :-)
Any suggestion or help to point me in the right direction would be appreciated
Thanks Guys
This topic first appeared in the Spiceworks Community

Exchange 2010 - 2013 Public Folder Migration target database gets much bigger than source database

Hi,
i have a question about the pf migration from Exchange 2010 to Exchange 2013. The source database ist about 370 GB. The migration process is still running. At the moment the target database is already 491GB big. Is that a normal behaviour during the migration
process.
Thanks

Hi,
After you have finished the public folder migration process, you can compare the item count of public folders to make sure all public folders have been moved to Exchange 2013.
You can check this by comparing the snapshots before and after the migration. You can refer to the "How do I know this worked?" section in the following article.
Migrate Public Folders to Exchange 2013 From Previous Versions
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 Public Folder Migration Problem

Hi All,
Wonder if any of you can assist with a public folder issue I am having with Exchange 2013. We have migrated from Exchange 2010 to 2013.
I have followed the guide for public folder migration here
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Everything went fine and as per the document - except I had to use the "largeitemlimit" parameter to get the public folder migration to complete.
We tested the public folder migration by adding content to public folders and creating public folders and it all appeared to be OK, we completed the migration and removed our old public folder databases from Exchange 2010.
However we noticed later that users cannot CREATE folders in SOME public folders. It appears from some testing that any folder that does not lie in the first public folder mailbox, end users cannot create public folders. Administrators can create them
fine from the ECP - just not from outlook.
It also appears some users cannot see some folders that they have permissions to.
Can anyone assist with some ideas to resolve ?
Thanks.

Question?
Are you able to create the Folder in OWA?
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
   LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
it is not functionally possible to create Public Folders in OWA user interface in Exchange 2013!.... From admin ECP it works fine!
My Bad, that's what I was trying to say.
Testing the same thing in the LAB, should have some update tomorrow morning.
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 Public Folder Migration Not Listed

I started a public folder migration from my 2010 SP3 Exchange server to my new 2013 SP1 Exchange server. Somewhere during the process I failed. Not sure where but I am now at the point where if I try to create a new public folder on teh 2013 box i get a
warning like this.
An existing Public Folder deployment has been detected. To migrate existing Public Folder data, create new Public Folder mailbox using -HoldForMigration switch.
So I then run Get-PublicFoldermIgrationRequest to see what is still waiting... I get no migration listed in Exchange Management Shell.
I would like to find the place in AD or in the Server that thinks there is still an active request out there and remove it so I can start again with a clean slate. How do I do that?
Thanks!

Hi Zulea,
This is a known issue, I recommend you refer to the following article to resolve the issue:
http://support.microsoft.com/kb/3004062/en-us
Cause:
This problem occurs when the Exchange organization coexists with an earlier version of Exchange Server, and one or more public folder databases from the earlier version of Exchange still exist.
Resolution:
To resolve this issue, use one of the following methods.
Method 1: Create the mailbox by using the -HoldForMigration switch:
This option lets an administrator create a public folder mailbox in order to begin a migration from the existing public folders:
Open the Exchange Management Shell.
Run the following cmdlet to create the public folder mailbox:
New-Mailbox "Public Folder Mailbox" -PublicFolder -HoldForMigration
Method 2: Remove all public folder databases from earlier versions of Exchange Server
To remove existing public folder databases, see the following TechNet websites, as appropriate for the version of Exchange that an existing public folder resides on.
Exchange 2010:
http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx
(http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx)
Exchange 2007:
http://technet.microsoft.com/en-us/library/aa998329(v=EXCHG.80).aspx
(http://technet.microsoft.com/en-us/library/aa998329(v=EXCHG.80).aspx)
Create the public folder mailbox by using either the Exchange Admin Center (EAC) or the Exchange Management Shell (EMS). To do this, see the following TechNet website:
http://technet.microsoft.com/en-us/library/jj552410(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

EXCHANGE 2013 Public Folder Migration across Domain Forest

Hi
I am planning to migration public folder across the forest but unable find any documentation. can you guys share the step by step guide to move/migrate public folder. we have exchange 2013 in source and target forest.
Please help!

Hi,
Currently, there is no official document about Exchange 2013 cross-forest public folder migration. Maybe some third party software can help you to do cross forest public folder migration.
Best regards,
Belinda Ma
TechNet Community Support

2010 - 2013 Public Folder migration failed - Property Expression isn't valid

We just migrated from 2003 to 2010, and now on to 2013. I have Exchange 2013 CU3 installed, and all mailboxes moved. When trying to move the public folders, I'm getting an error about DataValidationException. Property expression <PF
Name with spaces> isn't valid......
Many articles refer to a mail-enabled public folder with spaces can't have spaces in the alias. This is NOT a mail-enabled public folder, so there isn't an alias that I can find.
Any ideas?
Thanks!
--Kent

I believe aliases are only available in mail-enabled public folders.
Here is the exact message:
RunspaceId : 7fdb2174-e04a-4950-be57-6c0e77c4c02b
Name : PublicFolderMigration
Status : Failed
StatusDetail : FailedOther
SyncStage : CreatingFolderHierarchy
Flags : IntraOrg, Pull, Suspend, SuspendWhenReadyToComplete
RequestStyle : IntraOrg
Direction : Pull
Protect : False
Priority : Normal
Suspend : True
SourceVersion : Version 14.3 (Build 123.0)
SourceDatabase : Public Folder Database 0592897580
SourceServer : MYEXCHTEMP.mydomain.local
BatchName :
OutlookAnywhereHostName :
RemoteCredentialUsername :
AuthenticationMethod : Basic
RemoteMailboxLegacyDN :
RemoteMailboxServerLegacyDN :
BadItemLimit : 0
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
FolderToMailboxMap : {\}
QueuedTimestamp : 1/20/2014 8:36:49 PM
StartTimestamp : 1/20/2014 8:36:56 PM
LastUpdateTimestamp : 1/20/2014 8:36:59 PM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 1.11:22:26
TotalFinalizationDuration :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration :
TotalFailedDuration : 1.11:22:16
TotalQueuedDuration : 00:00:04
TotalInProgressDuration : 00:00:05
TotalStalledDueToCIDuration :
TotalStalledDueToHADuration :
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle :
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu :
TotalStalledDueToReadUnknown :
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration :
TotalIdleDuration : 00:00:01
MRSServerName :
EstimatedTransferSize : 0 B (0 bytes)
EstimatedTransferItemCount : 0
BytesTransferred : 0 B (0 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 0
PercentComplete : 10
PositionInQueue :
PreventCompletion : True
FailureCode : -2146233088
FailureType : DataValidationException
FailureSide : Target
Message : Error: Property expression "my Office Schedule" isn't valid. Valid values are:
Strings formed with characters from A to Z (uppercase or lowercase), digits from 0
to 9, !, #, $, %, &, ', *, +, -, /, =, ?, ^, _, `, {, |, } or ~. One or more
periods may be embedded in an alias, but each period should be preceded and
followed by at least one of the other characters. Unicode characters from U+00A1 to
U+00FF are also valid in an alias, but they will be mapped to a best-fit US-ASCII
string in the e-mail address, which is generated from such an alias.
FailureTimestamp : 1/20/2014 8:36:59 PM
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : 447ed7f5-3e13-4e3c-8654-c202ba040030
RequestQueue : Mailbox Database 1159688983
ExchangeGuid : b62af075-26c1-4636-8273-8aa94ec4725f
Identity : 2616f69b-d3b3-48d5-85fc-25cf0cea9860\447ed7f5-3e13-4e3c-8654-c202ba040030
DiagnosticInfo :
Report : 1/20/2014 8:36:49 PM [myexch01] 'mydomain.local/my/Administrators/Kent Iler'
created request.
1/20/2014 8:36:54 PM [myexch01] The Microsoft Exchange Mailbox Replication service
'myexch01.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
1/20/2014 8:36:55 PM [myexch01] Connected to target mailbox
'b62af075-26c1-4636-8273-8aa94ec4725f', database 'Mailbox Database 1159688983',
Mailbox server 'myEXCH01.mydomain.local' Version 15.0 (Build 775.0), proxy
server 'myexch01.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
1/20/2014 8:36:55 PM [myexch01] Connected to source mailbox '', database 'Public
Folder Database 0592897580', Mailbox server 'myEXCHTEMP.mydomain.local' Version
14.3 (Build 123.0).
1/20/2014 8:36:55 PM [myexch01] Request processing started.
1/20/2014 8:36:57 PM [myexch01] Stage: CreatingFolderHierarchy. Percent complete:
10.
1/20/2014 8:36:57 PM [myexch01] Initializing folder hierarchy from mailbox '': 33
folders total.
1/20/2014 8:36:57 PM [myexch01] Folder creation progress: 0 folders created in
mailbox 'b62af075-26c1-4636-8273-8aa94ec4725f'.
1/20/2014 8:36:59 PM [myexch01] Fatal error DataValidationException has occurred.
ObjectState : New

Lync Delegate Meeting Creation works in OWA but not in Outlook 2010

The environment is Exchange Online and Lync Online.
When users are assigned Delegate rights (either through Outlook OR via Powershell into Exchange Online) they are able to create regular meetings, modify calendar entries per their rights assigned in the calendar they have delegate access to.
However, when they attempt to create a Lync Meeting for the delegate calendar, they get the error that they do not have access. HOWEVER, if they go to OWA, and create an Online Meeting for the delegate, it works perfectly.
The user in question is a delegate for 3 people. For 1 of the 3, the user can create Lync Meetings for the delegate in Outlook with no issues. For the other 2 people, the user gets the no access error. However, the user can create Lync
Meetings for ALL 3 in OWA.
The rights and permissions that the delegate has to the 3 users are the same.
This leads me to believe it is an Outlook client issue and not an Exchange Online or Lync Online issue (the reason being the user can create the meetings in OWA)
Tried to create a new profile for the user, tried the /CLEANPROFILE switch and neither have resolved the problem.
Any ideas?
Thanks,
Tim

Hi,
Since everything works fine on OWA, I agree with you that this seems to be a client problem.
Remove the delegate permission for the user completely on OWA, then regain the permission, re-configure the Outlook Profile to check the result. Please also make sure the permission of the calendars have been granted for the user too.
Since it's client only, I doubt whether background programs are interfering with Outlook, perform a clean boot to test:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

ADRMS Server 2012 with exchange 2010, I have created some new templates, they are showing up in owa but not Outlook 2013

I cannot figure out why my templates do not show up in Outlook, when I manually update the AD RMS task scheduler to run the templates get pulled and placed into the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates
but when I launch outlook they are not displayed.
Has anyone encountered this type of problem before?

Hi,
Generally, the default Outlook Templates (.oft) is located in drive:\Users\<username>\AppData\Roaming\Microsoft\Templates.
Firstly, please make sure the Templates have been located in the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates path of your local machine. If it is there, please copy and paste the new Templates to the default Outlook Templates location.
Then we can right-click the Folder to select Properties in Outlook, and click dropdown next to "When posting to this folder, use:" and select the custom template form in the list. For more information about Outlook Templates, please refer to:
https://support.office.com/en-au/article/Save-time-with-templates-in-Outlook-8990002c-b3d7-4fc0-a4f4-4f2f94643aa7
Regards,
Winnie Liang
TechNet Community Support

Insert record works for me, but not my client...

This is odd - I basically have an ADDT insert record page to add a database record, which as far as I know worked just as it should.
But my client is saying it doesn't work on her machine - apparently when she hits 'add record' instead of going to the page confirming the record has been added, its just reloading a blank form on the add record page.
I've just double checked on my machine, and it definitely works for me.
She's definitely using the correct the URL.
Its just using mySQL / PHP / phpMyAdmin
Is there any reason at all that this should be the case, or any ideas what is causing it and what a solution might be?
Thanks.

Well, apparently its working for her now in Firefox, so looks like it may have something to do with IE8. I noticed on her screenshot there was something called Internet | Protected Mode : On - so maybe that's being over zealous in some way.

Hi my road runner mail works with mail but not outlook for mac?

This problem seems to have popped up after updating to Lion. I like outlook because I use it at work and I like the calander right there. My exchange account for work and gmail account function well but road runner is an issue? Does any one have experience with this issue?

Sounds to me like the mail server you're trying to reach is not reachable when off the netwok it lives on. This is pretty common of you're using e-mail provided by your ISP. It's done to help control spam relaying through their servers. Contact the mail provider for the correct server settings to use on a mobile device.

Public folder migration question - Outlook

Will users need to restart outlook once the public folders have been migrated from 2007 to 2013? I know a downtime is required but I'm curious what the end users should expect when this happens. They are all on outlook 2010. We are going to send
out communication to our users. Thanks.
Rich

Hello,
My environment is outlook 2010, exchange 2013. After I migrate public folder from exchange 2007 to exchange 2013, the outlook doesn't response the changes. So I restart outlook, it applies public folder changes.
During you migrate public folder, these steps (Lock down the public folders on the legacy Exchange server and finalize the public folder migration) require downtime, and you will not only access public folder. In my environment, the outlook clients can connect
to exchange server, and access other services, GAL and so on.
Cara Chen
TechNet Community Support

Link to PowerPoint Specific Slide Works in MS Word but Not Outlook

I'm running into problems with providing a link to a SharePoint 2010 site via a Outlook email message for people to open a specific slide in a multiple slide PowerPoint .ppsx document. When clicking on the link in MS Word, it works correctly
going to the specific slide (slide #18). The generic hyperlink path is below:
http://share/programs/Public/Overview.ppsx#18
When putting a link in Outlook with the same path, an error messages occurs and the PowerPoint does not load with following message in the PowerPoint error box.
"PowerPoint can't read http://share/programs/Public/Overview.ppsx#18
If the #18 is removed, the PowerPoint then loads correctly via Hyperlink in Outlook but goes to the first slide.
I don't understand why it works from MS Word with #18 but not in Outlook.
Any solutions or ideas?
Thanks
Pat

Hi, looks like the "#slide number" not working in Outlook. I can reproduce the problem in my environment. I tested it with a local location and it works in Word but not Outlook. Maybe it's by design.
Flynn

Public Folder Migration - 2010 to 2013 - Downtime incurred at "Lockdown" Stage

Looking for some information from those who have completed a successful Public Folder migration from 2010 to 2013.
1. Size of 2010 Public Folder Store
2. Downtime incurred upon the "Lock down 2010 Public Folder" stage once all mailboxes moved to 2013 and ready to cut-over to 2013

I would like to refer you at this well explained technet library and check whether you follow all the required prerequisites for a successful public folder migration from Exchange 2010 to 2013 : http://technet.microsoft.com/en-us/library/jj150486%28v=exchg.150%29.aspx
Also, please check this another article resource : http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part1.html
Apart from above resources, you may also consider at this comprehensive application(http://www.exchangemigrationtool.com/) that can be a better alternative approach while migrating public folder database
between two exchange server.

Public Folder Migration from Exchange 2007 to 2013 fails RelinquishedWlmStall budget limitations

I have been trying to migrate approx 50 public folders from Exchange 2007 to Exchange 2013 for several months. I have followed every link I can find on how to do the migration properly. It will stay in a queued state for hours until the MRS is
restarted. It will then start copying messages. After reaching 28% I get RelinquishedWlmStall as Status Detail. Running the Get-PublicFolderMigrationRequestStatistics -IncludeReport | fl command I get the following: (truncated)
Status : InProgress
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : ff4af794-f31e-4334-959f-7d6c4ccbe310
RequestQueue : PublicFolders
ExchangeGuid : b12c1f83-c4ae-46bb-a26a-0422d90800e4
Identity : eddf983d-5827-4a2a-98ef-820321ebebd0\ff4af794-f31e-4334-959f-7d6c4ccbe310
DiagnosticInfo :
Report
4/23/2015 8:49:37 AM [pionexxxx] Request processing started.
4/23/2015 8:49:37 AM [pionexxxxx] Cleared sync state for request
00000000-0000-0000-0000-000000000000 due to 'CleanupOrphanedMailbox'.
4/23/2015 8:49:38 AM [pionexxxxxx] Stage: CreatingFolderHierarchy. Percent complete:
10.
4/23/2015 8:49:38 AM [pionexxxxxx] Initializing folder hierarchy from mailbox '': 50
folders total.
4/23/2015 8:49:38 AM [pionexxxx] Folder creation progress: 0 folders created in
mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:38 AM [pionexxxxx] Warning: Failed to find or link recipient object
'FF-D5-EF-1A-0A-95-D7-4B-89-02-A6-9E-DA-4D-23-4B' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes' with EntryId '00-00
00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E
98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-4C-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'D8-46-09-BE-0B-3D-6E-4A-95-10-8F-C5-AA-0B-88-50' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Inventory'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-12-6A-F5-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'A6-12-DA-05-7D-21-DE-44-90-61-64-23-8C-62-41-F4' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Ulysses'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-7C-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'96-76-90-F1-A5-B7-DB-41-A7-A3-D6-8D-86-AE-45-A5' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/CSR Schedule' with EntryId '00-00-00
00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E-98
03-B9-14-4F-B4-12-C1-00-00-00-0E-34-FF-00-00'. This folder can be linked manually
by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'82-72-47-AA-D7-68-85-4C-91-92-41-45-8A-20-EA-6D' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/DC 24 Hr Schedule' with EntryId '00-
0-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-85-62-89-2A-52-C3-92-
5-93-F8-5A-6F-56-5D-D1-D4-00-00-00-00-27-37-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:41 AM [pionexxxx] Folder hierarchy initialized for mailbox
'b12c1f83-c4ae-46bb-a26a-0422d90800e4': 46 folders created.
4/23/2015 8:49:41 AM [pionexxxx] Stage: CreatingInitialSyncCheckpoint. Percent
complete: 15.
4/23/2015 8:49:41 AM [pionexxxx] Initial sync checkpoint progress: 0/50 folders
processed. Currently processing mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:42 AM [pionexxxx] Initial sync checkpoint completed: 46 folders
processed.
4/23/2015 8:49:42 AM [pionexxxx] Stage: LoadingMessages. Percent complete: 20.
4/23/2015 8:49:43 AM [pionexxxx] Messages have been enumerated successfully. 40607
items loaded. Total size: 149 MB (156,253,810 bytes).
4/23/2015 8:49:43 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 25.
4/23/2015 8:49:43 AM [pionexxxx] Copy progress: 0/40607 messages, 0 B (0
bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 28.
4/23/2015 9:04:37 AM [pionexxxxx] Copy progress: 3660/40607 messages, 7.015 MB
(7,355,409 bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
ItemsTransferred : 3660
PercentComplete : 25
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
It never tries to restart. Can anyone please help? The server checks for health all come back ok. I will be more than glad to include further information.

Hi,
Basic on the error message, I notice that public folder migrate slow and display that “Relinquishing job because of large delays due to unfavorable server health or budget limitations” .
If I misunderstand your concern, please do not hesitate to let me know.
Since it is just slow and not failing, please do not stop the batch, it might connect to another server for sync.
Meanwhile, please refer to below link so that get details about Exchange Online migration performance and best practices:
https://technet.microsoft.com/library/dn592150(v=exchg.150).aspx
If the issue persists, please collect the relevant migration report for further troubleshooting.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

2010 to 2013 Public Folder Migration - PF work in OWA but not outlook Client, password prompt?

Similar Messages

Maybe you are looking for