2011 15" MacBook Pro flickering integrated video

Is anyone else seeing this? I have a 15" Early 2011 MacBook Pro. When running on integrated video, fairly common gradients will cause the screen to flicker. I made a test image you can find here: http://i.imgur.com/aIonB8H.png. It must be zoomed to actual size. Apple are saying this is normal behavior, but it doesn't happen on discrete video, and I'm pretty sure an image isn't supposed to cause screen flicker like this. It's not a software thing, as several clean installs have proven.

This is happening to me, but only after my 2011 15" MBP went to the Apple repair depot and had the logic board replaced. It was not happening before.

Similar Messages

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

Early 2011 2GHz Macbook pro distorted blue screen then wont boot, 3 times in last 2 weeks

I have an early 2011, 2GHz macbook pro (15' model with ati radeon graphics). It was running fine for the last two years. Over the last couple of weeks, following things happen:
1. I was running on bootcamp windows, browsing and some flash content was open, suddenly distorted blue stripes appear and it froze. Force shut down using power button, turn on again and it wont boot on windows or mac, or recovery partition or from the dvd. Tried for about 4 hours, after nvram, pram reset, it was able to safe boot, then run disk utility to verify and repair the disk, it said that there were problems with hard drive and fixed,then booted normally.
2. I thought that the problem might be because I was on windows, so took a back up of the windows drive, erased it and installed windows 8 using bootcamp. It ran well for an week. After that, once I connected it with the tv using HDMI to watch a video, after I disconnected it, the screen was garbled over the windows start screen, but I was able to command restart normally. After restart, it wont boot to windows or mac.
3. After several hours of trying, i was able to boot using the dvd this time, it said it 'can not install mac on the hard drive', erased the hard drive and it was able to install the os (snow leopard). After completing install, logged in to app store to download previously purchased mountain lion. Then ran it to upgrade the os, after the upgrade was completed, at the point when it prompts for apple id and password to set up icloud, it again froze with distorted blue screen. Shut down forcefully. Then turn on again and it wont boot. After the white screen and the sound, it shows the apple logo and spinning wheel for a while, then a bright white screen and nothing happens.
Can anybody help reading the symptoms?

I have the Early 2011 2GHz Macbook Pro and I have the same problem too.
I switched out the logicboard a month ago and today the graphics just went distorted.
Any solutions? Now I'm thinking it is the Graphics Card.

I m havind 15inch 2011 late macbook pro lap i7 processor 8gb ram 1tb hdd can i use avid media composer and final cut pro in this specifications?

i m havind 15inch 2011 late macbook pro lap i7 processor 8gb ram 1tb hdd can i use avid media composer and final cut pro in this specifications?

Can't speak about avid, since I am not familiar with the software.
You can certainly use FCP X on that machine. It should work better if you use a fast external drive for your media and projects.
There is a free trial, so try it out and see how it goes. You should also follow some good video tutorials, if you are not familiar with the application. FCP X is a lot different from Avid, Premiere or even Final Cut Pro 7.

Why is 64 bit Windows 7 Professional running so slow on my new 2011 15" Macbook Pro?

I installed 64 bit Windows 7 Professional onto my new 2011 15" Macbook Pro and while the Mac partition runs fine, everything about the Windows partition seems to be slow. There's hangups, random loading icons for processes that shouldn't require any work at all (even browsing through Windows Explorer will do this from time to time). I don't undertand why this is happening, I thought running 64 bit would unleash the full power of my new Mac. Should I just wipe it and do a clean install of Windows 7 32 bit instead? I've never had issues/compatibility problems with installations of 32 bit Windows.

Well if you just installed it, then perhaps it's not validated yet and when it does there will be Windows Updates to increase the performance.
I'm sure you followed all the Bootcamp instructions about installing the Apple drivers and all that.
The only thing I can suggest is you reinstall it again after a few days and all the Windows Updates applied if it speeds up or not. Keep hitting it over and over. Make sure you have the free Microsoft Security Essentials installed or you'll get pwned really fast.
Also you have to remember that when Bootcamp carves out a Windows partition it's doing so at the bottom slowest part of your hard drive, the innermost sectors which are much smaller than the sectors OS X uses, therefore Windows will always be a bit slower than OS X, and there really isn't anything you can do about it unless you had a SSD.
I don't think you can install 32 bit Windows, even though it may run, it's only going to use half the registers of your 64bit processors.
Windows 7 64 bit runs fine in my virtual machine, I even get over 45 fps on Cube 2 Sauerbraten, but of course it's a rather light 3D game.
If you got the 2.0 Ghz 15" MacBook Pro, that could explain things, it's has a rather weak video card.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

Macbook pro cannot play videos on facebook, any solutions?

My macbook pro cannot play videos on facebook, but I installed adobe flash and I can see youtube videos and others. My version is OS X 10.8 when I bought it few days ago, and I just upgraded to OS X Mountain Lion.

Hi pardzrose,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Can you please advise what happens when you try play a Video? can you also advise what steps you have taken so far to help resolve this issue?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Want to install Windows 8 on my early 2011 13" MacBook Pro?

Hi guys,
I am planning to install Windows 8 but unsure of a few things, particularly with the version I have to get.
I have an early 2011 13" MacBook Pro, running 10.9.3 and it has never had any previous versions of Windows on it before. Can I simply get the "upgrade" version (which is cheaper), or do I have to get the "full" version to do this? I can't seem to find the "full" version anywhere on the Microsoft website by the way...
I am looking at this: http://www.microsoftstore.com/store/msaus/en_AU/pdp/Windows-8-Pro-Upgrade---Stud ent-Offer/productID.272005100 (student price upgrade version)
Would I be able to install that in Bootcamp? And what sort of files do I get once I pay for and download it?
Thanks for your help

You can only install the upgrade version if you already have a full version of Windows installed. In your case you will need to purchase the full version.
Buy it on disk.

Looking for 16GB RAM That is Compatible with Late-2011 17" Macbook Pro

Hi guys,
I am looking to upgrade the RAM and Hard Drive in my late-2011 17" Macbook Pro. I've already found the hard drive I want to use, but I don't know as much about RAM, and I'm not sure which 16GB (2 x 8GB) kit would be both compatible and give me the best bang for my buck. I am in Canada so any suggestions linking to Canada Computers or NewEgg would be the best! I'd really appreciate any help.
Thanks,
Jacob

First, goto OWC - https://www.macsales.com/
It has a guide for all things Mac & Memory
Second, get an SSD as it will speed up your computer tremendously.
OWC or Crucial are very good Mac-friendly brands.

2011 17" MacBook Pro freezes for over 5 mins on user password

Hey everyone,
I installed Yosemite on my 2011 17" MacBook Pro. Since then, after a period of my computer being on or after sleep, it appears that the process that handles login using my user password hangs for a bit and then proceeds to work.
On the login screen, after I enter my password, the focus is drawn off of the password field, and then the computer just sits for what seems to be about 5-7 minutes. This also happens when OS X asks me to enter my password to install / uninstall something; the login window just sits there and does nothing.
It doesn't happen right after a restart, and it seems like it happens more often after the computer goes to sleep and wakes back up, or has just been running for a while.
A couple other possibly related problems is that my system will sometimes just start to slow down and every app will slowly become unresponsive, sometimes to the point where I have to use the power button to do a hard reset. Also I've noticed that my system won't remember that I set my screensaver to "never" but will reset itself to "15 minutes" (which is annoying, because after I come back from the screensaver, my system takes a long time to log back in).
I can't do a system reinstall right now, and I've tried to do PRAM resets and disk repairs. Maybe I'm googling the wrong words, but I've searched and I can't find threads with my exact issue.
Can anyone help? Thanks!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?

Hi. My question is pretty much as the heading says :
Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
As far as I can tell from googling and searching around, it does appear that it is safe to do so.
Specifically this page
http://support.apple.com/kb/HT2346
But I just wanted to double-check for confirmation that it is indeed safe to use the adapter from such an old mbook pro in a newer one.
The wattage is the same.
I wish to do so as I prefer the T-connector, and my older adapter has a much longer extension cord on it.
If not I may order another one from ebay.
Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
Thanks for your help.

Benway1 wrote:
Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
Yes.
I recommend you buy one directly from Apple. There are many counterfeit power adapters on the market that could damage your MacBook Pro or potentially cause a fire.
Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
Nearly all of them are, even if the seller insists it is "genuine OEM". Legitimate adapters from eBay are likely to be used, not new. There is nothing wrong with used, as long as you know what you're getting.
Identifying a counterfeit is possible only through close examination.

Late 2011 17" Macbook Pro upgrade advice needed

Hey everybody, I would like to u[grade my Late 2011 17" Macbook Pro.
8GB DDR3 RAM
750GB HDD
OSX 10.7.4
So after reading on Crucial.com that I could house 16gb ram, despite what apple said, I investigated this and according to people this is tr
So my next question is, will i be able to fit a 512GB SSD from Crucial into my MBP? THe only reason I feel it's a valid question is I had the option of 1 and 2Tb Hdds WITH a 256GB SSD.
Thanks for reading everybody

The only way that you can use both a SSD in your drive bay and another hard drive is to install the hard drive in your optical bay. If you're willing to give up your optical drive, OWC sells kits to do just that.
Then you could use your external drives for data storage & backups.
Is this a workable option?
Clinton

How to instal OS 10.7.5 on a new HD in my late 2011 15" macbook pro

Hi there,
I have just got a late 2011 15" macbook pro i7. My plan is to fit a NEW hard drive.
My older 15" Mid 2010 i5 machine came with discs for OS 10.6 and I would like to move to the 10.7.5 OS that is currently on the OLD hard drive from the NEW macbook.
However I would still like to be able to copy my Data and Aplications from my OLD Macbook to the NEW drive in the NEW macbook.
Sorry I apriciate that is all a little confusing to read.
If i had a hard coppy of OS 10.7 i would be happy. But im new to this Download OS thing.
Thanks for advice!

Hi there,
I have just got a late 2011 15" macbook pro i7. My plan is to fit a NEW hard drive.
My older 15" Mid 2010 i5 machine came with discs for OS 10.6 and I would like to move to the 10.7.5 OS that is currently on the OLD hard drive from the NEW macbook.
However I would still like to be able to copy my Data and Aplications from my OLD Macbook to the NEW drive in the NEW macbook.
Sorry I apriciate that is all a little confusing to read.
If i had a hard coppy of OS 10.7 i would be happy. But im new to this Download OS thing.
Thanks for advice!

You can't upgrade to a 7200rpm hard drive in the Early 2011 13" MacBook Pro. It is not supported. Period.

I tried unsuccesfully to upgrade the hard drive in my Early 2011 13" MacBook Pro to a 750GB 7200RPM hard drive. After several attempts with different hard drives I realized that the kernel panic that showed up was due to the lack of compatibility with the drives to the MacBook Pro. I had a Mid 2009 13" MacBook Pro that I did not have any issues with whatsoever. I sold that MacBook Pro and was able to upgrade to the brand new base model without any out of pocket cost. Upon purchase of the new 13" MBP I maxed out the RAM to the full 8GB. After 2 months of freezing, lockups, spinning rainbow wheels and having to force shutdown I tried one last ditch effort to see if a faster drive would help. After speaking with the Apple telephone reps and the Apple Store Genius Bar we discovered that Apple doesn't even offer the option of a 7200RPM drive on their website - a fact that I found quite disturbing. The concensus is that it is a power management issue that causes the incompatibility and the reason the drives are not offered on the 13" models. The problems I had were the end of the line for me. I just switched out that train wreck for the Early 2011 15" MacBook Pro base model. I got home and immediately installed the 750 GB 7200RPM Western Digital Scorpio Black hard drive and it was recognized within seconds. I'm back in business with gleeful abandon.

Sadly... they don't have all the answers. As someone who use to serve in the capacity (Mac Genius) it can definitely be a challenging position. You're "the voice" of Apple's service policy & procedures. Sounds like the person you spoke with got it wrong this time. It's definitely worth a follow up, because like I said, I've got a machine in my household that's living proof of compatibility between a 7200 RPM drive and 13" MBP (Early 2011).
Apple is very good about support documentation when there's incompatibility or unsupported configurations, the fact that there isn't one for 7200 RPM drives would tell me that the people/person you spoke with was misinformed.
I know I always appreciated when a customer made it known to me that I was wrong on something and supplied the right answer. I sure as heck don't have all the answers and if I can lead from my mistakes, well, I won't make them anymore.

2011 17" Macbook Pro battery won't charge

Troubleshooting for my kid. A 2011 17" macbook pro was taken in for a new logic board a year ago. When she got it home she just put it in a closet and used her newer MacAir. Now that a real fix is available she's dragged it out and hooked it up. It fails to charge. The light on the magsafe is green. It will operate on being plugged in but as soon as the cord is removed it dies. We aren't quite sure what the issue maybe because she never booted it up immediately after the logic board was installed and they did not wipe the hard drive as they told her that did. We've tried the SMC reset to no avail. I'd just like some opinions before I take it back to the Apple store for her. Thanks
17" 2011 Macbook Pro running whatever OS X was before Mavericks.

It may be a bad battery. Post this from System Information>Power:
(make certain that the charger is attached)
Ciao.

2011 15" MacBook Pro flickering integrated video

Similar Messages

Maybe you are looking for