2011 Essentials "The backup versions on this computer and the server do not match"

I have been unable to get one of my client computers to backup successfully. The first error was it could not successfully take a snapshot. I finally figured out it had to be the GPT disk issue, so I installed the KB2781278 hotfix on the server. Restarted
server and restarted workstation. Now, I get the above error about the versions not matching. Additionally, if I try to configure the workstation backup on the server, it says the backup is not successfully setup. An unknown error prevented the server from
performing the task. Both services are running, btw. Update, just realized I can't configure any backups from the server. Time to uninstall hotfix? Any advice for a frustrated user? Thanks!
Jim Wells
Tallahassee, FL
Jim Wells

i have the same issue - WHS2011 - laptop with GPT disc
installed hotfix KB2781272, rebooted server, removed connector from laptop - rebooted - reinstalled connector - rebooted
now get backup version mismatch
tried reinstalling 2781272, but says already installed (haven't tried removing yet)
can't find KB2934953 in windows update
 mark
can't backup any of my existing non-GPT systems either
My KB2934953 appeared in an "optional" update in Windows Update. Maybe there is a way to install it directly. KB2934953 is what solved my problem, finally. Now, if I could just get the Pro Pack to install...
Jim Wells

Similar Messages

  • The length received from the server does not match the expected length

    Every time I attempt to transfer a tv show or movie from my mac mini library to my work laptop library, I receive the above error - any ideas?

    I found this plugin which solved pretty much all of my mail font rendering problems.  It is designed for Lion, so don't know whether it will work but thought I would offer it up.
    http://noware-it.zxq.net/

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • All of a sudden my iTunes stopped working, and I get the following error messages:   1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem   and   2. iTunes was not installed correct

    All of a sudden my iTunes stopped working, and I get the following error messages:
    1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
    and
    2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
    Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
    This is not working. I've tried installing as Administrator but doesn't make any difference at all.
    There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
    Thanks

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99192)

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

    Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

    This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
    I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

  • Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :  "mac os x snow leopard cannot be installed on this computer"  And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1

    Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : 
    "mac os x snow leopard cannot be installed on this computer" 
    And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1
    Intel Core 2 Duo
    1.83Ghz
    l2Cache: 2mb
    Memory : 2GB
    Bus Speed: 667MHz
    Please help me......
    Thanks

    Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
    Please suggest me what to do???
    Thanks

  • Pro Tool Studio LE 7 upgrade... anyone knows where I can buy the upgrade version for this? and how much does it cost?

    I have a Mac Pro 2006 running on leopard and I need to upgrade my Pro Tool Studio LE 7 to 8 so it can work on Leopard.. anyone knows where I can buy the upgrade version for this? and how much does it cost?

    Upgrade to Pro Tools Studio LE 8: - http://shop.avid.com/store/product.do?product=288865113879120
    But it would be worth searching through the Updates to see if there is an update for Leopard, which it looks like there is: - http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=355241

  • When i try to put apps on my ipod touch it says it not authorized for this computer and to go on the website and do it. but i dont know how?

    When i try to put apps on my ipod touch it says it not authorized for this computer and to go on the website and do it. but i dont know how?

    Hello Bobbie,
    Have you authorized your iTunes library yet to play and sync your iTunes purchases? To do this, head to the Store drop down menu and choose Authorize This Computer.  Then enter in your iTunes store account credentials and then try resyncing your iPod.
    B-rock

  • When trying to sync, I get this computer is no longer authorized for purchases on this iphone. I click on store-authorize this computer and get successful and still get the error. I tried deauthorizing and reauthorizing and keep getting this message. Help

    when trying to sync, I get this computer is no longer authorized for purchases on this iphone. I click on store-authorize this computer and get successful and still get the error. I tried deauthorizing and reauthorizing and keep getting this message. Help

    the solution you propose is not helping . are there alternatives ?
    I have Iphone 4  never  had any problem , and withouth changing or modifying , this problem popped up out of the blue ....
    Please HELP

  • The iPod software update server could not be contacted. the server does not support this version of itunes its saying

    i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
    Regards,
    Brahma.

    You need to update to the latest version of iTunes. Go to the apple and select software update.
    i

  • When I click the download apps,itunes ask me to authorise this computer and I finish do it, it ask me authorize again and again

    when I click the download apps,itunes ask me to authorise this computer and I finish do it, it ask me authorize again and again

    Delete the song from your Itunes music list, then redownload it, Itunes will ask you if you if you want to download it for free.  This seems to be the fix for my problems.

  • Essentials Connector: The server is not available after upgrade from Windows 8 Pro to Windows 8.1. Pro

    Hi all
    As many others I am facing also connection problems with Windows Server 2012 Essentials R2 and a windows client pc.
    The client pc in question, with windows 8 pro, has been successfully joined through the essentials connector to the domain.
    All things went good: media streaming, shared folders, a successfull backup has been started through the essentials launchpad, the client appeared as online in the devices tab of the essentials dashboard.
    Then I upgraded the pc to windows 8.1 pro.
    Now the client can't connect to the server. Following issues appear:
    The client pc is showed as offline the the dashboard when it is online.
    Backups (from launchpad or server) aren't  possible -> no connection to the windows server essentials adminitration service.
    Dashboard not available from launchpad
    The message "the server is not available" appears, when I try to reconnect the client by the essentials connector.
    BUT:
    ping to the server's ip address works.
    media streaming is also ok
    shared folders are still available.
    Any ideas what changed with the upgrade to 8.1 Pro? Is the a firewall problem on the client pc?
    Many thanks for your help.
    PS. If anyone needs a specific log file from the server or the client, please let me know.

    Hi Justin
    I executed all you instructions, but nothing helped.
    I add here the ClientDeploy.log and the ComputerConnector.log
    The ClientDeploy stopps after a registry insert error.
    The user executing the connector is member of the Administrators Group on the Client pc.
    I started the connector even with "Run as Administrator" but nothing helped.
    Any ideas why this registry insert failes?
    Thanks for you help and best regards
    Hans
    [5692] 140604.211748.1774: ClientSetup: Start of ClientDeploy
    [5692] 140604.211748.3181: General: Initializing...C:\WINDOWS\system32\Essentials\ClientDeploy.exe
    [5692] 140604.211748.3337: ClientSetup: Create client deployment registry subkey if necessary
    [5692] 140604.211748.3493: ClientSetup: The initial launching way: -LaunchedFrom:installer
    [5692] 140604.211748.3493: ClientSetup: The initial state is set
    [5692] 140604.211748.3493: ClientSetup: The initial serverName: 192.168.3.21
    [5692] 140604.211748.3493: ClientSetup: Loading Wizard Data
    [5692] 140604.211748.3649: ClientSetup: Saving Wizard Data
    [5692] 140604.211748.3649: ClientSetup: Current DeploymentStatus=Start
    [5692] 140604.211748.7400: ClientSetup: Showing the Client Deployment Wizard
    [5692] 140604.211748.8493: ClientSetup: Machine name:PCFA, length:4
    [5692] 140604.211748.8650: ClientSetup: The input server name is 192.168.3.21
    [2156] 140604.211748.8806: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [2156] 140604.211748.8806: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
    [5692] 140604.211748.8962: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
    [5692] 140604.211748.8962: ClientSetup: Set the Deployment Sync Event
    [2156] 140604.211748.8962: ClientSetup: The configuration cab will be downloaded from 192.168.3.21
    [2156] 140604.211748.9118: ClientSetup: Download file Setup.cab from server
    [2156] 140604.211748.9275: ClientSetup: Making web request:
    https://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
    [2156] 140604.211748.9743: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
    Das Remotezertifikat ist laut Validierungsverfahren ungültig.
       bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
       bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
       bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       bei System.Net.ConnectStream.WriteHeaders(Boolean async)
       --- Ende der internen Ausnahmestapelüberwachung ---
       bei System.Net.HttpWebRequest.GetResponse()
       bei Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
    [2156] 140604.211748.9743: ClientSetup: Cannot get configuration file with https, will try http...
    [2156] 140604.211748.9743: ClientSetup: Download file Setup.cab from server
    [2156] 140604.211748.9743: ClientSetup: Making web request:
    http://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
    [2156] 140604.211749.0369: ClientSetup: Downloaded file C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
    [2156] 140604.211749.0369: ClientSetup: The configuration cab is downloaded to C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
    [2156] 140604.211749.1775: ClientSetup: Adding Server Info data in the Product Registry
    [2156] 140604.211749.1931: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.3.21, normal environment
    [2156] 140604.211749.1931: ClientSetup: Exiting PreConfigTask.Run()
    [2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
    [2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
    [2156] 140604.211749.1931: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0217: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
    [5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
    [5792] 140604.211758.0373: ClientSetup: Entering InstallRootCertTask.Run
    [5792] 140604.211758.0373: ClientSetup: Install root cert to local trusted store
    [5792] 140604.211758.0373: ClientSetup: Exiting InstallRootCertTask.Run
    [5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
    [5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
    [5792] 140604.211758.0373: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0373: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
    [5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
    [5792] 140604.211758.0529: ClientSetup: Entering SetupVpnAndDATask.Run
    [5792] 140604.211758.0685: ClientSetup: Deploy VPN profile
    [5792] 140604.211758.0998: ClientSetup: Exting SetupVpnAndDATask.Run
    [5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
    [5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
    [5792] 140604.211758.0998: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0998: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
    [5792] 140604.211758.0998: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [5792] 140604.211758.0998: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
    [5792] 140604.211758.0998: ClientSetup: Entering ValidateUserTask.Run
    [5792] 140604.211758.0998: ClientSetup: Validating User
    [5792] 140604.211758.0998: ClientSetup: Call MachineIdentityManager.GetMachineStatus
    [5792] 140604.211758.1779: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
    BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.Security.SecurityNegotiationException: Es konnte keine Vertrauensstellung für den sicheren SSL/TLS-Kanal
    mit Autorität mars01:65500 eingerichtet werden. ---> System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
    Das Remotezertifikat ist laut Validierungsverfahren ungültig.
       bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
       bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
       bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
       bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       bei System.Net.ConnectStream.WriteHeaders(Boolean async)
       --- Ende der internen Ausnahmestapelüberwachung ---
       bei System.Net.HttpWebRequest.GetResponse()
       bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
       --- Ende der internen Ausnahmestapelüberwachung ---
    Server stack trace:
       bei System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
       bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
       bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
       bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
       bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
       bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
       --- Ende der internen Ausnahmestapelüberwachung ---
       bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
       bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
    [5792] 140604.211758.1779: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\ipconfig.exe"  /all
    [2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [2156] 140604.211758.2092: ClientSetup: Standard Ouptput: Windows-IP-Konfiguration
    [2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Hostname  . . . . . . . . . . . . : PCFA
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Prim„res DNS-Suffix . . . . . . . : mydomain.local
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Knotentyp . . . . . . . . . . . . : Hybrid
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IP-Routing aktiviert  . . . . . . : Nein
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    WINS-Proxy aktiviert  . . . . . . : Nein
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Suffixsuchliste . . . . . . . : mydomain.local
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter LAN-Verbindung* 11:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Virtueller Microsoft-Adapter fr direktes WiFi
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 16-
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Ethernet-Adapter LAN-Verbindung:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Broadcom NetLink (TM)-Gigabit-Ethernet
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : DC-
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IPv4-Adresse  . . . . . . . . . . : 192.168.2.6(Bevorzugt)
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Subnetzmaske  . . . . . . . . . . : 255.255.255.0
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease erhalten. . . . . . . . . . : Mittwoch, 4. Juni 2014 18:03:36
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease l„uft ab. . . . . . . . . . : Freitag, 6. Juni 2014 20:49:17
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Standardgateway . . . . . . . . . : 192.168.2.1
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP-Server . . . . . . . . . . . : 192.168.2.1
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Server  . . . . . . . . . . . : 192.168.3.21
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:                                       
    192.168.1.52
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    NetBIOS ber TCP/IP . . . . . . . : Aktiviert
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter WiFi:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix: Home
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Qualcomm Atheros AR5B97-Funknetzwerkadapter
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 94-
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Tunneladapter isatap.{8F57A34A-FE47-429C-97D0-AA777D79C23F}:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 00-00-00-00-00-00-00-E0
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Nein
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
    [1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
    [4504] 140604.211758.2092: ClientSetup: Standard Error:
    [5792] 140604.211758.2248: ClientSetup: The exit code of the process (C:\WINDOWS\system32\ipconfig.exe) is: 0
    [5792] 140604.211758.2248: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\route.exe"  print
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Schnittstellenliste
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   9...16 39 e5 4c c5 f2 ......Virtueller Microsoft-Adapter fr direktes WiFi
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   4...dc 0e a1 06 1f c9 ......Broadcom NetLink (TM)-Gigabit-Ethernet
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   3...94 39 e5 4c c5 f2 ......Qualcomm Atheros AR5B97-Funknetzwerkadapter
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1...........................Software Loopback Interface 1
    [1344] 140604.211758.2404: ClientSetup: Standard Error:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   5...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv4-Routentabelle
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:      Netzwerkziel    Netzwerkmaske          Gateway    Schnittstelle Metrik
    [5792] 140604.211758.2404: ClientSetup: The exit code of the process (C:\WINDOWS\system32\route.exe) is: 0
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:           0.0.0.0          0.0.0.0      192.168.2.1     
    192.168.2.6     10
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.0        255.0.0.0   Auf Verbindung         127.0.0.1   
    306
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.1  255.255.255.255   Auf Verbindung         127.0.0.1    306
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   127.255.255.255  255.255.255.255   Auf Verbindung         127.0.0.1    306
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.0    255.255.255.0   Auf Verbindung       192.168.2.6    266
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.6  255.255.255.255   Auf Verbindung       192.168.2.6    266
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:     192.168.2.255  255.255.255.255   Auf Verbindung       192.168.2.6    266
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung         127.0.0.1   
    306
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung       192.168.2.6   
    266
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255  255.255.255.255   Auf Verbindung         127.0.0.1    306
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255  255.255.255.255   Auf Verbindung       192.168.2.6    266
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
    [5792] 140604.211758.2404: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\nslookup.exe" mars01
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv6-Routentabelle
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:  If Metrik Netzwerkziel             Gateway
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ::1/128                  Auf Verbindung
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ff00::/8                 Auf Verbindung
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
    [2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Server:  UnKnown
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Address:  192.168.3.21
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Name:    mars01.mydomain.local
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Addresses:  192.168.3.21
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.1.131
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.4.31
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
    [4504] 140604.211758.2560: ClientSetup: Standard Error:
    [1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
    [5792] 140604.211758.2560: ClientSetup: The exit code of the process (C:\WINDOWS\system32\nslookup.exe) is: 0
    [5792] 140604.211758.2717: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
    [5792] 140604.211758.2717: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: In den Registrierungsschlüssel kann nicht geschrieben werden.
       bei Microsoft.Win32.RegistryKey.EnsureWriteable()
       bei Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
       bei Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
       bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
    [5792] 140604.211758.2717: ClientSetup: Exiting ValidateUserTask.Run
    [5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
    [5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
    [5792] 140604.211758.2717: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [06/04/2014 20:23:38 1730] --------------------------------------------------------------------------------------------------
    [06/04/2014 20:23:38 1730] wmain: Start of Computerconnector
    [06/04/2014 20:23:38 1730] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10).exe)
    [06/04/2014 20:23:38 1730] =================================
    [06/04/2014 20:23:38 1730] Current Os information:
    [06/04/2014 20:23:38 1730] Suite = [256]
    [06/04/2014 20:23:38 1730] Type = [1]
    [06/04/2014 20:23:38 1730] Architecture = [9]
    [06/04/2014 20:23:38 1730] IsStarterEdition = [0]
    [06/04/2014 20:23:38 1730] IsHomeSku = [0]
    [06/04/2014 20:23:38 1730] Major = [6]
    [06/04/2014 20:23:38 1730] Minor = [3]
    [06/04/2014 20:23:38 1730] Build = [9600]
    [06/04/2014 20:23:38 1730] SPMajor = [0]
    [06/04/2014 20:23:38 1730] SPMinor = [0]
    [06/04/2014 20:23:38 1730] =================================
    [06/04/2014 20:23:38 1730] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
    [06/04/2014 20:23:38 1730] SetPackageDlcUrl: .NET url is set to
    http://go.microsoft.com/?linkid=9816306
    [06/04/2014 20:23:38 1730] SetPackageDlcUrl: Connector url is set to
    http://go.microsoft.com/fwlink/p/?LinkId=275102
    [06/04/2014 20:23:38 1730] wmain: Calling Computerconnector::ShowWizard()
    [06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Initializing common controls
    [06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Done initializing common controls
    [06/04/2014 20:23:38 1730] Displaying the wizard
    [06/04/2014 20:23:38 1730] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
    [06/04/2014 20:23:38 1730] Current user default UI lang setting is 1031
    [06/04/2014 20:23:38   c8] CComputerconnector::Run: Installation is ready to run
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index=  0
    [06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
    [06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
    [06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
    [06/04/2014 20:23:42 1774] Connector installation state is 1
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index=  1
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index=  2
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index=  3
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index=  4
    [06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index=  5
    [06/04/2014 20:23:42 1774] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
    [06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
    [06/04/2014 20:23:42 1774] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
    [06/04/2014 20:23:43 1774] CComputerconnector::Run: WaitForSingleObject RetVal = 0
    [06/04/2014 20:23:43 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
    [06/04/2014 20:23:43 1730] wmain: End of Computerconnector: hr=0x0
    [06/04/2014 20:54:06 1220] --------------------------------------------------------------------------------------------------
    [06/04/2014 20:54:06 1220] wmain: Start of Computerconnector
    [06/04/2014 20:54:06 1220] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10)(1).exe)
    [06/04/2014 20:54:06 1220] =================================
    [06/04/2014 20:54:06 1220] Current Os information:
    [06/04/2014 20:54:06 1220] Suite = [256]
    [06/04/2014 20:54:06 1220] Type = [1]
    [06/04/2014 20:54:06 1220] Architecture = [9]
    [06/04/2014 20:54:06 1220] IsStarterEdition = [0]
    [06/04/2014 20:54:06 1220] IsHomeSku = [0]
    [06/04/2014 20:54:06 1220] Major = [6]
    [06/04/2014 20:54:06 1220] Minor = [3]
    [06/04/2014 20:54:06 1220] Build = [9600]
    [06/04/2014 20:54:06 1220] SPMajor = [0]
    [06/04/2014 20:54:06 1220] SPMinor = [0]
    [06/04/2014 20:54:06 1220] =================================
    [06/04/2014 20:54:06 1220] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
    [06/04/2014 20:54:06 1220] SetPackageDlcUrl: .NET url is set to
    http://go.microsoft.com/?linkid=9816306
    [06/04/2014 20:54:06 1220] SetPackageDlcUrl: Connector url is set to
    http://go.microsoft.com/fwlink/p/?LinkId=275102
    [06/04/2014 20:54:06 1220] wmain: Calling Computerconnector::ShowWizard()
    [06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Initializing common controls
    [06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Done initializing common controls
    [06/04/2014 20:54:06 1220] Displaying the wizard
    [06/04/2014 20:54:06 1220] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
    [06/04/2014 20:54:06 1220] Current user default UI lang setting is 1031
    [06/04/2014 20:54:06 1404] CComputerconnector::Run: Installation is ready to run
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index=  0
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
    [06/04/2014 20:54:09  e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
    [06/04/2014 20:54:09  e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
    [06/04/2014 20:54:09  e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
    [06/04/2014 20:54:09  e90] Connector installation state is 1
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index=  1
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index=  2
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index=  3
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index=  4
    [06/04/2014 20:54:09  e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index=  5
    [06/04/2014 20:54:09  e90] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
    [06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
    [06/04/2014 20:54:09  e90] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
    [06/04/2014 20:54:13  e90] CComputerconnector::Run: WaitForSingleObject RetVal = 0
    [06/04/2014 20:54:13 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
    [06/04/2014 20:54:13 1220] wmain: End of Computerconnector: hr=0x0

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for

  • WS_EXCEL is Obsolete in ECC 6.0

    Hi Guys, Could you plese suggest me, which is similar function module in ECC 6.0. Thanks, Gourisankar.

  • Where did voice-to-text go in IOS 8.1 Message app?

    I've done a pretty extensive search and I can't find anyone asking about this - so it may just be me. I understand why the development team decided to make  the microphone send a voice clip in Messages instead of converting voice-to-text.  The proble

  • Use .CSV files to UPDATE

    Hi, I have a requirement to process .CSV files and use the info to UPDATE an existing table. One line from the file matches a row in the existing table by an unique key. There is no need to keep the data from the .CSV files after. I was planning to u

  • Format of flat file!!!

    hello friends!!! We are uploading opportunities in our system from a flat file. I am using LSMW with CRMXIF_ORDER_save for that. All has been the test data is working fine. But the problem i am facing is in which format the file should be for?? in re

  • CS6 - The [ and ] keys stop resizing the brush

    I very recently installed CS6.  I have used Photoshop for years (CS5, CS3, CS, ...). Now under CS6 I find that periodically the [ and ] keys will not resize the brush.  I have to restart Photoshop to get them to work again. Anyone else seen this?  Is