2011 MacBook Pro charger exploded
The charger appeared to be in fine condition when I plugged it into a surge protector in the evening. The next afternoon it looked like the cable coming out of the brick and going to the computer had exploded. The cable, where it joined the brick, was charred and frayed, looking like it had been arcing. There is a piece of the cable including plastic and wiring, melted to my tile floor where the charger was laying. I brought it to the Apple store, but the girl helping me seemed extremely relaxed about the damage to the charger, couldn't tell me why it had happened or if it would happen again, and charged me to buy a new charger even though the one that had been damaged was less than a year old (unfortunately my Apple Care had run out three weeks prior). Has this happened to any one else? Should I be worried about it happening again?
Not likely - if you had it plugged into a UPS or some surge protectors, they might cover the explosion. Otherwise you're just going to have to pony up the $79 for a new adapter - did you contact your insurance company? They may replace it.
Clinton
Similar Messages
-
Is there any way I can get a used or refurbished 2011 MacBook Pro Charger, Please?
Hi Guys,
I was wondering, and so sorry for asking,
Is there any way I can get a used or refurbished 2011 MacBook Pro Charger, Please?
I m a missionary and my current MacBook Pro Charger is no longer charging and I m
really low in finances at this time and I really really need a charger for my MacBook Pro
so I can continue with my work as a Missionary in Latinamerica...
Thanks for all your support and understanding
Isaac CruzSweet Thanks for your suggestion!
Guess What? one of my mission supporters bought me today a brand new Power Charger straight from Apple Store here in San Diego... I m soooo Excited!!! woo hoo
Peace,
Isaac Cruz -
Can I use a 2011 Macbook Pro charger for my 2007 Macbook?
My charger for my 2007 Macbook works as an AC adapter, but will not charge my battery. My girlfriend has a new Macbook pro and I want to know if I can use her charger to charge my battery. I know they output different wattages, but I'm not sure how that will affect it. I have heard rumors that new Pro chargers will fry the batteries of the older Macbooks but I don't know if there is any truth to that. Thank you in advance for any help you can provide.
You can use a higher wattage charger to charge a mac that normally uses a lower wattage charge and that is fine. You do not want to do the opposite.
-
charger exploded due to electricity surge, Does the apple care warranty cover the charger
Not likely - if you had it plugged into a UPS or some surge protectors, they might cover the explosion. Otherwise you're just going to have to pony up the $79 for a new adapter - did you contact your insurance company? They may replace it.
Clinton -
I spilled on my 2011 macbook pro, will not charge
I spilled hot chocolate on my 2011 macbook pro, and it only got along the bottom front left edge of the computer, and not into any ports or on my charger. Charger was plugged in at the time. Computer shut off a couple of minutes after, so I restarted it,and the fan was running very loudly. \the trackpad was a little bit messed up, so I did an SMP reset and the computer is now fine. However, my charger will not work. When plugged into the laptop, it doesn't charge and the light doesn't come on, though it has no visible damage. Is the problem with the laptop or charger? Could the computer have damaged he charger at the time of the spill? Could the hot chocolate have seeped into the seam on the bottom of my computer? It was only wet for about 15 seconds.
Normally, if electronic device suffers from the accident of liquid spill, you should shut down them and plug off power supply immediately to avoid possible electricity broken. In fact, it is not easy to detect visible damage by visual look. In regard to your example, i mean hot chocolate actually penetratres electronic component inside your computer and cause the fault for hardware system. What you need to do is remove the computer case and try to dry internal electrical circuit out. If this method doesn't work, you should bring to repair service. Good luck !
-
Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk -
Can i use a charger from a pre-2011 macbook pro on my 2012 macbook pro?
left my charger out of state, it's being shipped but in the meantime i need to charge my laptop! a friend has a charger that i think is from a 2011-2010 macbook pro. will this work? is it bad for my computer?
Welcome to Apple Support Communities
Of course. Both MacBooks Pro have the same power settings and the same charger, so there won't be any problem, more if both of them are 13-inch MacBooks Pro or 15-inch MacBooks Pro.
In the case of 13-inch MacBooks Pro and 15-inch MacBooks Pro, they come with chargers that provide different power, 60W for the 13-inch MacBook Pro and 85W for the 15-inch MacBook Pro. If you use a 15-inch MacBook Pro charger with a 13-inch Mac, you won't have any problem, but if you use a 13-inch MacBook Pro charger with the 15-inch MacBook Pro, the charge may be slower -
Early 2011 Macbook Pro shuts off when charger unplugged. Worked fine yesterday.
Hi,
I have an early 2011 Macbook Pro, which I purchased brand new; it's just over one year old. Yesterday the laptop held a charge no problem for 6 hours or more. Today, when I disconnect it from the charger it goes to sleep. When I plug it back in and press the power button it wakes up, and I can use it.
This cannot be a battery issue, since it was holding a charge without trouble yesterday. Does this appear to be a serious issue? My one year warranty expired 2 months ago yesterday, and I had forgot to purchase AppleCare. Sigh. It almost seems like surgically-planned obsolecense or punishment for not purchasing AppleCare.
I would immensely appreciate any help/suggestions on this.
Thanks.OK, in that case:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion or Mountain Lion will not solve the problem. -
2011 MacBook Pro Battery Not Charging
17" 2011 MacBook Pro 2.2ghz i7 8GB RAM (upgraded OWC), 128GB SSD (in optical bay), and stock 750 GB HD. Running Lion. Battery cycle count: 15
Battery is not charging after a heavy GPU or CPU load (gaming, editing, HD movie streaming). Tried multiple SMC resets and a PRAM reset. It was charging after you let it sit for several hours. I sent it into Apple for a repair and was rejected because of the missing optical drive (that's another story), anyhow, when it came back it won't charge at all. Battery says (not charging) but running on AC power. The Magsafe light is not lit. The Magsafe port was replaced on the computer, but that didn't fix it.
Trying to avoid having to reformat and send into Apple (change it back to stock config).
Anyone have a solution?The battery can't be charged when the cpu is under full load because in that situation it is using power from the battery. Shut the MBP down (not sleep) to see if it will charge in that mode.
-
2011 MacBook Pro not holding charge
I'm sure there's something wrong with my 2011 MacBook Pro somewhere. I don't use it every day but on return I'm almost guaranteed to find it's run out of battery after a few days non-use.
Does this seem right?How about mine? Mine appears to be holding a terrible charge and more recently only seems to last for 2 hours at tops.
-
Brand New 2011 Macbook pro Not Charging while Plugged in
I purhcased a brand new 2011 17" macbook pro. The macbook will charge up to 100% while nothing is plugged in. When i start running applications it will switch to "Not charging" on the toolbar. This is while its plugged in.
This has happned when i have just 2 apps open.
I DJ a nightclub and sometimes have 4 apps open, which is not a lot and this doenst happen with my 2009 17" macbook pro.
I have done the SMC reset and this still happens.
I have read all the fourms and googled it and see im not alone.
From what i can see, and makes sense is, the new Quad-Core processors use more power, and with just the macbook running, even openign up 2 apps, its using about 95W of power. With the powersupply only 85W, it makes sense how it can switch to not charging.
From what i have seen, it will actually go down to about 3% of charge and stay there. It will say Not chargeing for a while, then go away like its charging, then switch back to not charging. It basicllys charges it enough to keep it around 3%.
now if i turn off all apps, it will charge back up, but that is hard to do in the middle of DJ'n the nightclub.
I know my best friend has this same issue on his 2011 macbook pro, he bought online from Apple, and i got mine from an Apple store about 4 months later, so i know its not the same batch.
I just want to know if anyone else is seeing this on the 2011 quad-core laptops and does anyone know if Apple is aware of this and are there plans on updating the powersupply to provide more power. Maybe 85W is not enough to charge it.
I have not opened a ticket with Apple yet but i will.
I just wanted to post this up to see if anyone is seeing this same thing.
ThanksHello, I have had very similar problems but with the MBP not even registering that a charger is plugged in (no light coming on and no change to the battery symbol).
I had a mid 2010 model that was sent in 4 times to be fixed, with no change, followed by the unit being replaced altogether with the latest 2011 model, only to find the issue persists (the charger was replaced early on as well).
The only retaining factor is the Lion software which forums have highlighted has effected charging when individuals have upgraded.
It is appalling that a company like Apple have not taken steps to address these issues and will go as far as to replace all components TWICE in one Laptop, as well as give out a new Laptop, without tackling the real problem.
Appalled and ultimately very disappointed. -
About a year back i had replaced the MLB of my early 2011 macbook pro and it was all working fine. A month back my battery went dead saying "Battery Not Detected". I went to Ample technologies, Bangalore, India and gave it for diagnosis. Ample technologies are the authorized Apple support service in Bangalore, India. After 3 days and no phone calls they email me that "They feel that the MLB MIGHT be the problem and they want to test it by replacing the MLB and i have to pay for their testing". I had already spent 40k indian rupees ($700) less than a year back to replace an MLB and now they want to replace it again at the cost of 43k ($750) indian rupees. I have no idea what to do now. Spending 80k indian rupees ($1400) in less than a year to replace the MLB twice sounds unfair to me. Can someone help me out here ? Is there a valid warranty period applicable , since i have changed the MLB a year back ?
short of doing a SMC reset, you maybe at their mercy.
resetting the SMC http://support.apple.com/kb/ht3964
You can try yourself running the Apple Hardware Test- and see if it generates any error codes. Post the results
AHT http://support.apple.com/kb/HT1509 -
I have, a 2011 macbook pro with osx lion, last year it died, by doing the not getting past the logo and startup gear, i tried doing the data screen repair where u type some code and try and repair, that didnt work so i took it to genius bar and it wasnt in warrenty and they were gonna charge me but as was only 3 weeks over the warrenty period, so they did for free, and the harddrive they installed had a 90 day warrenty and that is ova now, and my mac has now done the same thing again and this time i think was a power interruption at some point and now has a fault, another thing that crossed my mind is that yes this has done this but could they have (to save money and not right offf a new one) given me my same harddrive back and jus wiped it now 5 months down the track its broken again?
The laptop isnt even 18 months old and has broken down twice, my old macbook had 4 5 years not a hiccup.
In conclusion i need to get photoes off it and cant seem to activate safe mode, or do i know how to access the startup disk that the guy did at genius last time, or get to the data screeen that allowed me to attempt to repair the drive. Can someone help me please, i have tried command r and holding shift, meither have worked.It's hard to know whether your hard drive has actually failed or if your system has just gotten badly corrupt. If the former, unfortunately, there may be no way to get any data off the drive at this point. If there aren't any backups of that data, it will be gone forever, unless perhaps a high-priced (ie, in the thousand dollar range) data recovery service has some luck with it.
If the system and/or hard drive are badly corrupt, the same may be true. Some or all of that data may be irrevocably corrupt by now. However, there are some ways that you can attempt to recover from this situation without paying such huge fees. First, if you have access to another Mac, and both have Firewire ports, you can connect the two using Firewire target disk mode. This will mount the damaged drive as if it were an external hard drive on the second Mac, and could allow you to copy some data from the drive.
Another possibility would be to buy an external hard drive, install Mac OS X on it and boot the machine from that, then copy any data from there that you can.
In both of these cases, it may be helpful to scan the damaged drive for recoverable files using something like Data Rescue.
There are also some possible ways to repair the drive if you can't do either of those things, but any repairs at this point could potentially destroy data. I only recommend this as a last resort. Still, if all other options have failed, try repairing the drive using DiskWarrior. This can fix problems that Disk Utility (and fsck, the command-line tool that it sounds like you may have used) cannot. It is possible that DiskWarrior will be able to get the drive back in working order long enough to get the data recovered, though of course it's also possible the process will be destructive.
If none of the above work, you'll have to seek professional help. -
Early 2011 MacBook Pro- The thermal paste discussion.
It is my goal to clear up the questions and concerns Apple customers have been having regarding heat or fan related concerns with Early 2011 MacBook Pros. If your MacBook Pro was produced within the last few months the thermal issue has been resolved and it will likely not be in issue for you. If you are still wondering if your computer is effected or what the real issue is keep reading.
The MacBook Cools itself by 2 main methods: active and passive. The active cooling is via a fan that blows air through a heatsync and into a tube called a heat pipe which leads to the back of the computer where the hot air is discharged through a vent at the bottom of the screen behind the hinge. The fan lowers the air pressure inside the case causing outside air is drawn in the case, displacing the hot air inside and helping to cool the other components.
The computer uses passive cooling to remove the residual heat from the processor which comes mostly in the form of radiant heat. Passive cooling is also used to cool the other components of the computer (memory, disk drives, battery etc). Passive cooling works by conductive heat transfer ie. syncing to the case of the computer. Some of the heat then is radiated. Some of it is transferred from the outside of the case via convective cooling; the foot pads on the bottom cover are designed to raise it up just enough to allow air underneath for convection to occur. (Convection is the process in which hot air to rises and is displaced by cooler air.) The rest of the heat from the bottom cover is absorbed by whatever surface you have the computer on.
The processor will not sync to the case very much if the board is assembled properly however the other components of the computer will, requiring the case to be in open air to allow for passive cooling to take place.
If you have some sort of covering such as a plastic snap on case it will likely interfere with passive cooling in all of it's 3 of it forms, this will cause the computer to be abnormally hot. I recently saw someone in the Apple store with a MacBook Air experiencing abnormal heating due to a plastic snap case so this particular problem is not unique to MacBook Pros and it is not the cause of the issue being discussed here. I do not recommend the use or anything that covers the computer while it is running with the exception of something that covers the back of the display panel only. If you are worried about your computer getting damaged go and buy a laptop insurance policy from Worth Ave group. The insurance does not cover cosmetic damage or misplaced items but will cover accidental damage including spills. This insurance also covers theft, vandalism and natural disasters, is quite inexpensive and the claims process and deductible is similar to most phone insurance plans (which they also offer).
User induced overheating can also occur when the computer is placed on an improper surface such as a couch cushion, car seat, bed, pillow etc. Doing this can interfere with both passive and active cooling.
As I mentioned earlier In all likelihood if your computer was produced after May it is not affected. I personally have been in posession of 3 MacBook Pros, one produced before May which had the problem, one after which had no problems and one produced more recently that has mind blowing thermal performance way beyond all of my expectations.
So the question at this point is exactly what is the problem, how can it be diagnosed and how can it be rectified.
After extensive research and testing I have determined the issue to be related to improper application thermal paste. I involuntarily became involved in this pursuit as a result of the problems I was experiencing and I did not initially come at from an objective viewpoint but rather one of cautious skepticism. I had anticipated before purchasing my computer that there may be a thermal issue. This anticipaion came as a result of reading an article on ifixit.com about the disassembly of the brand new early 2011 MacBook Pro. When the technician performing the disassembly removed the main heat sync he expressed concern about how much much thermal paste was present, expressing that it seemed excessive. This lead the technician to question wether or not it would cause heating problems.
Proper application of thermal paste is critical to the functionality of the active cooling system and when applied improperly will not properly transfer the heat to the heat-sync which in turn gets cooled by the fan. Proper application of thermal paste insures the heat is removed from the case as efficiently as possible. Doing this both reduces the speed at which the fan needs to run in a lot of situations and prevents too much heat from the processor needing to be cooled by passive means. If is is not applied properly it will eventually lead to overheating of the case as well as the other components of the computer. This can cause damage firstly to the computer's battery and can also significantly shorten the life computer. (Or any other kind of electronic device for that matter.)
The problem can be diagnosed by testing the computer using a program called System Load or any other software that will put your computers proscessor use up to its maximum and keep it there indefinitely. Placing full load on your GPU at the same time during the test is also recommended. Keep in mind, if you are using your computer the fan will spin up if needed for additional cooling. You should expect the fan go up to its maximum speed during the test, it is not in of itself an indication of a negative result. Make sure to have the computer plugged in, fully charged and on a proper surface. A desk or other flat surface should be fine. Exceptions would include the top of a refrigerator since it has insulation just underneath the metal exterior or any surface that is heated by any means such as a dryer or other appliance.
(The temps to follow are in ºF)
Run the test for up to 1 hour. If the case of the computer breaks 93 degrees your unit is likely affected. Expect the unit to even possibly reach temps approaching and exceeding 100º, if this happens immediately abort the test. Also look for the processor temp shooting up to around 180 in the first 30 seconds and the fan spinning up right away. Typically on a properly functioning unit the temperature of the case will end up being somewhere in the neighborhood of 88-91º. If this test is preformed in a room with a normal ambient room temperature of about 68 degrees. Even after an hour the case of the computer should not be significantly hot, just warm to the touch. On a normally operating unit the fan will start to kick in within 90 seconds or so and may not reach full speed even after several minuets.
At one point the case of my computer actually reached 95º during normal web browsing.
This is a problem that I have had successfully corrected twice by reapplication of thermal paste. The first time was on a machine produced prior to may and the second was after a logic board was replaced at the repair depot. (I suspect the inventory turnover is lower for boards than whole computers resulting in a board from the initial production run being installed in my computer.)
If you forget everything I just wrote remember this. #1 if you are using your computer hard enough the fan will end up running at high speed at some point. #2 This problem is not in any way related to the design of the MacBook Pro, or its use/application. #3 This mostly not a problem of the CPU being too hot; these Sandy Bridge CPUs are rated for 212ºf and will routinely be in the neighborhood of 200º, this is hotter than other chips but well within design limits. #4 I have done everything in my power to make sure that this problem has been corrected and I have every logical and evidenced based reason to believe it has been resolved in machines produced after may. #5 This is not an Apple acknolidged issue. Technicians will tell you that there is no problem because these higher temps are normal and within operating limits and if they weren't the machine would shut itself off. (This is a bit extreme; just like a lot of other devices such as electronics, toaster ovens and space heaters with thermal overload protection this automatic shutoff is intended to occur when damage or risk of fire is imminent because the device is WAY outside of normal operating paramaters.) They will also not tell you when asked what these limits are, that they know what they are or in some cases that such figures they even exsist.
I stake my personal and professional reputation on the accuracy of my findings, it is my job as a private consultant to help my clients to resolve complicated and expensive issues just like this one.
Bottom line if you are having a problem and Apple won't fix it on warranty don't ditch your machine, just pay to have it done yourself. In most cases you can pay have it done at the Apple store. It will probably cost you less than 100.00, and it will not void your warranty as long as the work is done by Apple certified technician. It will be well worth it; after all in spite of this MacBook Pro's are hands down the best portable computers on the market, with an industry leading warranty and support to back it up. On it's worst day Apple's service and support is better than any computer/ consumer electronics company, even on its best day.
I hope this helps to clarify this issue! I also hope it will help anyone affected to resolve the problem instead of resorting to a refund and settling for something else.hello all
you can try this:
Go to system preferences > settings > built in display > see bottom of window.
check "show mirroring options in the menu bar when available". then click "airplay display" > and select your device.
That's what happened to my MBP - 15-inch, Late 2011 model. -
I know this question has been asked before. My problem is similar to what is mentioned here but I hope someone can explain the error log attached below and hopefully I'm able to find a DIY solution without much cost.
I'm using a early 2011 MBP with Yosemite installed. Not too long ago, I manually upgraded my hard disk to a OWC SSD.
Recently my MBP screen went into white blank screen AGAIN while I was working on a python script which crawls the web with about 10 threads. I used to run this same script without *much* problems before yosemite (ie: i encounter the same problem with Mavericks but not so frequent. I never install mountain Lion before so I can't comment on that. I came from Snow Leopard to Maverick and Yosemite). Other times, my MBP will go into the same white blank screen while doing other misc stuff and this usually doesn't involved me watching any HD video.
A couple of solutions that get my MBP up and running are:
1) I hard shutdown and bootup my MBP. After the apple logo it freezes at the white blank screen. While it stays in the white screen, I will unplug my power adapter and wait for my battery to drain out completely. Once the battery is completely drained out, I will plug in my power adapter and I'm definitely able to boot up my MBP without any problem the first time. I did the same and thus I'm able to post this question.
2) Bootup into safe mode and restart. It works once
3) I have also disabled dynamic switching of graphics card but that didn't work.
Below is my error report. I don't quite understand it. I hope someone explain to me?
Wed Nov 26 23:00:48 2014
*** Panic Report ***
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7fa25f70af
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7fa25f70af
IA32_MC3_MISC(0x40f): 0x000000000003ffff
panic(cpu 0 caller 0xffffff802161f12a): "Machine Check at 0xffffff7fa25f70af, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010bd43000, CR3: 0x0000000018e1e03e, CR4: 0x00000000000626e0\n" "RAX: 0x0000000000000000, RBX: 0x0000000000000040, RCX: 0xffffff814f6e042c, RDX: 0xffffff814f6e0340\n" "RSP: 0xffffff812ae23898, RBP: 0xffffff812ae238d0, RSI: 0x0000000000000004, RDI: 0xffffff812b337fd8\n" "R8: 0x0000000000000040, R9: 0x00000000ffffffff, R10: 0x0000000000000000, R11: 0xffffff812b337eec\n" "R12: 0x0000000000000012, R13: 0xffffff812b2d7fd8, R14: 0x0000000000000040, R15: 0xffffff812b2d7fec\n" "RFL: 0x0000000000010202, RIP: 0xffffff7fa25f70af, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/trap_native.c:168
Backtrace (CPU 0), Frame : Return Address
0xffffff81034d5cf0 : 0xffffff802153a811
0xffffff81034d5d70 : 0xffffff802161f12a
0xffffff81034d5ed0 : 0xffffff802163acef
0xffffff812ae238d0 : 0xffffff7fa25f91ec
0xffffff812ae23920 : 0xffffff7fa25fbd85
0xffffff812ae23940 : 0xffffff7fa25fc241
0xffffff812ae23990 : 0xffffff7fa22bd0bb
0xffffff812ae239d0 : 0xffffff7fa22bfcb4
0xffffff812ae23aa0 : 0xffffff7fa22c5190
0xffffff812ae23ac0 : 0xffffff7fa22c50dd
0xffffff812ae23ad0 : 0xffffff8021ad8008
0xffffff812ae23b30 : 0xffffff8021b01c92
0xffffff812ae23b60 : 0xffffff8021b02859
0xffffff812ae23bc0 : 0xffffff8021b00003
0xffffff812ae23d00 : 0xffffff80215ea517
0xffffff812ae23e10 : 0xffffff802153e91c
0xffffff812ae23e40 : 0xffffff80215235a3
0xffffff812ae23e90 : 0xffffff8021533e8d
0xffffff812ae23f10 : 0xffffff802160a142
0xffffff812ae23fb0 : 0xffffff802163ac66
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(2.0)[917971EF-5947-3DF5-BB9F-D353D05C0484]@0xffffff7fa229b000->0xffffff7fa2310fff
dependency: com.apple.driver.AppleFDEKeyStore(28.30)[3BAA7FEE-7EF3-3A9A-A0B1-902A4AB7171F]@0xffffff7fa2290000
com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0xffffff7fa25ef000->0xffffff7fa2629fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff7fa1d24000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000021200000
Kernel text base: 0xffffff8021400000
__HIB text base: 0xffffff8021300000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 44905012498
last loaded kext at 7194739946: org.virtualbox.kext.VBoxNetAdp 4.3.12 (addr 0xffffff7fa4795000, size 28672)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.3.12
org.virtualbox.kext.VBoxNetFlt 4.3.12
org.virtualbox.kext.VBoxUSB 4.3.12
org.virtualbox.kext.VBoxDrv 4.3.12
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 267.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.AMDRadeonX3000 1.2.8
com.apple.iokit.IOBluetoothUSBDFU 4.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleLPC 1.7.3
com.apple.kext.AMD6000Controller 1.2.8
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.CoreStorageFsck 471
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOSurface 97
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: OWC Mercury Electra 6G SSD, 240.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1Hi all, I had many problems with the GPU of my Early 2011 MacBook Pro and the MLB was replaced three times so far. The first time was about a year ago and I went to an authorised retailer and not to an Apple Store. They first incorrectly diagnosed the problem and told me that they had to replace the hard drive. After that, they still did not really find the problem but said that the MLB had to be replaced, which I did given that my computer was only two years old and running fabulously. About a month later the problem reappeared and the MLB was replaced again, this time by using the 3-months guarantee of the MLB. The first time I had to pay. A few weeks ago I again had problems (the computer was very hot and fans were running at maximum speed most of the time although I was running only Mail and Preview). I'm, I took it directly to the Apple Store and after about five minutes of looking at it they decided to replace in the MLB for free. There is no official replacement program but I think Apple has now recognised the issue and they don't charge you anything if you had the issue before (they call this a repeat repair). So good luck if you haven't solved your problem yet. If the problem reappears there should be no problem.
Maybe you are looking for
-
Connect Access Mdb on My Web Server
Hi all user, this is my first post. I have pdf form (connect database access only in read only) for collection information from my customer all ok if use in local but when i upload in my web pdf file and mdb database i recive error connection databas
-
J_security_check internal server error.
Did somebody experienced this error? and what is the solution? Thanks. I using WL 6 sp1 on NT server 4. 1- I created a user 'xena' in WL console; note: 'xena' does not belong to the WL Administrators group 2- I created an application with the followi
-
Best practice - converting to 8 bit?
I'm am working on a project using Corel Painter X which is limited to 24 bit (8 x 3 RGB) color. Some of my source photographs are Nikon Raw (shot with a D200) which is 12 bit. Aperture will of course export versions as 8 bit tif. My question for thos
-
Covers: Will Rendered Text Cause Rejection?
Just wondering if you create a cover that is 100% rendered image (no text overlayed, etc), will Apple reject the book? Do we have to make covers where the graphical elements are background for the text?
-
DataSource null in ReceiveStream and NewReceiveStreamEvent never called
Hi, in a ReceiveStreamListener.update(ReceiveStreamEvent evt) implementation, when evt is instanceof StreamMappedEvent, the receiveStream.getDataSource() return null. Why? p.s. StreamMappedEvent is the only evt type called. No NewReceiveStreamEvent