2011 MacBook Pro not holding charge

I'm sure there's something wrong with my 2011 MacBook Pro somewhere. I don't use it every day but on return I'm almost guaranteed to find it's run out of battery after a few days non-use.
Does this seem right?

How about mine? Mine appears to be holding a terrible charge and more recently only seems to last for 2 hours at tops.

Similar Messages

Brand New 2011 Macbook pro Not Charging while Plugged in

I purhcased a brand new 2011 17" macbook pro. The macbook will charge up to 100% while nothing is plugged in. When i start running applications it will switch to "Not charging" on the toolbar. This is while its plugged in.
This has happned when i have just 2 apps open.
I DJ a nightclub and sometimes have 4 apps open, which is not a lot and this doenst happen with my 2009 17" macbook pro.
I have done the SMC reset and this still happens.
I have read all the fourms and googled it and see im not alone.
From what i can see, and makes sense is, the new Quad-Core processors use more power, and with just the macbook running, even openign up 2 apps, its using about 95W of power. With the powersupply only 85W, it makes sense how it can switch to not charging.
From what i have seen, it will actually go down to about 3% of charge and stay there. It will say Not chargeing for a while, then go away like its charging, then switch back to not charging. It basicllys charges it enough to keep it around 3%.
now if i turn off all apps, it will charge back up, but that is hard to do in the middle of DJ'n the nightclub.
I know my best friend has this same issue on his 2011 macbook pro, he bought online from Apple, and i got mine from an Apple store about 4 months later, so i know its not the same batch.
I just want to know if anyone else is seeing this on the 2011 quad-core laptops and does anyone know if Apple is aware of this and are there plans on updating the powersupply to provide more power. Maybe 85W is not enough to charge it.
I have not opened a ticket with Apple yet but i will.
I just wanted to post this up to see if anyone is seeing this same thing.
Thanks

Hello, I have had very similar problems but with the MBP not even registering that a charger is plugged in (no light coming on and no change to the battery symbol).
I had a mid 2010 model that was sent in 4 times to be fixed, with no change, followed by the unit being replaced altogether with the latest 2011 model, only to find the issue persists (the charger was replaced early on as well).
The only retaining factor is the Lion software which forums have highlighted has effected charging when individuals have upgraded.
It is appalling that a company like Apple have not taken steps to address these issues and will go as far as to replace all components TWICE in one Laptop, as well as give out a new Laptop, without tackling the real problem.
Appalled and ultimately very disappointed.

Late 2011 macbook pro not mirroring

Hi,
I have a late 2011 macbook pro 13"(I checked the serial number). osx 10.7.5. Apple tv 3 (md199LL/A) version 5.2.1. and i still dont' see the airplay symbol at the top of my screen. I can airplay from itunes, but not mirror my screen. Any ideas?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

Airplay mirroring on early 2011 macbook pro not mirroring

First, here's what I have:
Early 2011 macbook pro (identifier 8,3) with 2.2 Intel Core i7 processor connected over Wifi on 2.4 Ghz channel.
OSX 10.8 Mountain Lion
Apple TV 3 (fully up to date)
The stats I've read say airplay mirroring should work fine. I can connect both machines just fine. I can stream movies just fine. I can send music just fine. I just cannot mirror my desktop. I have the icons, a connection is made, but all that shows is a blank screen. I've adjusted the resolutions with no luck. I've shut down and rebooted both machines with no luck...
Any solutions or do I have to count my losses with Apple Airplay and spend more money on a 3rd party alternative (AirParrot)?

Hi eoinodonnell,
The problem was resolved, but I have the worst answer... it just started working, and has remained reliable since. I never found out exactly what fixed it, but I would try these things:
1) Try a factory reset on the Apple TV, and make sure your Macbook pro has all the latest updates.
2) Try to repair disk permissions (better to do it from disk utility from boot menu) and reboot your macbook.
3) Backup your files and do a fresh install of OSX.
I know I performed all these tasks, and possibly more, but something along the way did fix the problem.
I hope something here works! If so, please let me know what did it.

Macbook pro not fully charging

My macbook pro is less than one month old and it started not fully charging a few days ago. It was at 97% when the light turned green, and wouldn't go up any more. I always have my keyboard light off & the screen light very dim so don't tell me to lower it. I then decided to calibrate the battery and it charged 100% but I unplugged it for a little bit and it dropped to 99% and will not go up anymore. The charger light is green and it thinks it's fully charged. What is going on?!! this is new!

Normal behaviour. See below.
http://support.apple.com/kb/TS1909
Stedman

Macbook Pro not working - charger flashing orange and green...

So I have 13" macbook pro 2010... i was on it yesterday when all of a sudden the screen started flashing black and back to normal and black again really quickly... so i shut down the laptop and put it aside for a few hours... i returned later and tried to turn it on and nothing... then i noticed the charger light was flashing orange and green... all the battery lights on the side are dead and when i try to turn it on no noise coming from the laptop.... i have tried resetting the smc but nothing... please help?

Repair facility.
Ciao.

I spilled on my 2011 macbook pro, will not charge

I spilled hot chocolate on my 2011 macbook pro, and it only got along the bottom front left edge of the computer, and not into any ports or on my charger. Charger was plugged in at the time. Computer shut off a couple of minutes after, so I restarted it,and the fan was running very loudly. \the trackpad was a little bit messed up, so I did an SMP reset and the computer is now fine. However, my charger will not work. When plugged into the laptop, it doesn't charge and the light doesn't come on, though it has no visible damage. Is the problem with the laptop or charger? Could the computer have damaged he charger at the time of the spill? Could the hot chocolate have seeped into the seam on the bottom of my computer? It was only wet for about 15 seconds.

Normally, if electronic device suffers from the accident of liquid spill, you should shut down them and plug off power supply immediately to avoid possible electricity broken. In fact, it is not easy to detect visible damage by visual look. In regard to your example, i mean hot chocolate actually penetratres electronic component inside your computer and cause the fault for hardware system. What you need to do is remove the computer case and try to dry internal electrical circuit out. If this method doesn't work, you should bring to repair service. Good luck !

2011 MacBook Pro Battery Not Charging

17" 2011 MacBook Pro 2.2ghz i7 8GB RAM (upgraded OWC), 128GB SSD (in optical bay), and stock 750 GB HD. Running Lion. Battery cycle count: 15
Battery is not charging after a heavy GPU or CPU load (gaming, editing, HD movie streaming). Tried multiple SMC resets and a PRAM reset. It was charging after you let it sit for several hours. I sent it into Apple for a repair and was rejected because of the missing optical drive (that's another story), anyhow, when it came back it won't charge at all. Battery says (not charging) but running on AC power. The Magsafe light is not lit. The Magsafe port was replaced on the computer, but that didn't fix it.
Trying to avoid having to reformat and send into Apple (change it back to stock config).
Anyone have a solution?

The battery can't be charged when the cpu is under full load because in that situation it is using power from the battery. Shut the MBP down (not sleep) to see if it will charge in that mode.

My early 2011 MacBook Pro says battery not detected and does not work with a new battery either. Works only with the charger plugged in.

About a year back i had replaced the MLB of my early 2011 macbook pro and it was all working fine. A month back my battery went dead saying "Battery Not Detected". I went to Ample technologies, Bangalore, India and gave it for diagnosis. Ample technologies are the authorized Apple support service in Bangalore, India. After 3 days and no phone calls they email me that "They feel that the MLB MIGHT be the problem and they want to test it by replacing the MLB and i have to pay for their testing". I had already spent 40k indian rupees ($700) less than a year back to replace an MLB and now they want to replace it again at the cost of 43k ($750) indian rupees. I have no idea what to do now. Spending 80k indian rupees ($1400) in less than a year to replace the MLB twice sounds unfair to me. Can someone help me out here ? Is there a valid warranty period applicable , since i have changed the MLB a year back ?

short of doing a SMC reset, you maybe at their mercy.
resetting the SMC http://support.apple.com/kb/ht3964
You can try yourself running the Apple Hardware Test- and see if it generates any error codes. Post the results
AHT http://support.apple.com/kb/HT1509

How do i access my installer disc on a 2011 macbook pro as they are virtual now, i have tried to use command r and hold shift on start up

I have, a 2011 macbook pro with osx lion, last year it died, by doing the not getting past the logo and startup gear, i tried doing the data screen repair where u type some code and try and repair, that didnt work so i took it to genius bar and it wasnt in warrenty and they were gonna charge me but as was only 3 weeks over the warrenty period, so they did for free, and the harddrive they installed had a 90 day warrenty and that is ova now, and my mac has now done the same thing again and this time i think was a power interruption at some point and now has a fault, another thing that crossed my mind is that yes this has done this but could they have (to save money and not right offf a new one) given me my same harddrive back and jus wiped it now 5 months down the track its broken again?
The laptop isnt even 18 months old and has broken down twice, my old macbook had 4 5 years not a hiccup.
In conclusion i need to get photoes off it and cant seem to activate safe mode, or do i know how to access the startup disk that the guy did at genius last time, or get to the data screeen that allowed me to attempt to repair the drive. Can someone help me please, i have tried command r and holding shift, meither have worked.

It's hard to know whether your hard drive has actually failed or if your system has just gotten badly corrupt. If the former, unfortunately, there may be no way to get any data off the drive at this point. If there aren't any backups of that data, it will be gone forever, unless perhaps a high-priced (ie, in the thousand dollar range) data recovery service has some luck with it.
If the system and/or hard drive are badly corrupt, the same may be true. Some or all of that data may be irrevocably corrupt by now. However, there are some ways that you can attempt to recover from this situation without paying such huge fees. First, if you have access to another Mac, and both have Firewire ports, you can connect the two using Firewire target disk mode. This will mount the damaged drive as if it were an external hard drive on the second Mac, and could allow you to copy some data from the drive.
Another possibility would be to buy an external hard drive, install Mac OS X on it and boot the machine from that, then copy any data from there that you can.
In both of these cases, it may be helpful to scan the damaged drive for recoverable files using something like Data Rescue.
There are also some possible ways to repair the drive if you can't do either of those things, but any repairs at this point could potentially destroy data. I only recommend this as a last resort. Still, if all other options have failed, try repairing the drive using DiskWarrior. This can fix problems that Disk Utility (and fsck, the command-line tool that it sounds like you may have used) cannot. It is possible that DiskWarrior will be able to get the drive back in working order long enough to get the data recovered, though of course it's also possible the process will be destructive.
If none of the above work, you'll have to seek professional help.

Early 2011 Macbook Pro shuts off when charger unplugged. Worked fine yesterday.

Hi,
I have an early 2011 Macbook Pro, which I purchased brand new; it's just over one year old. Yesterday the laptop held a charge no problem for 6 hours or more. Today, when I disconnect it from the charger it goes to sleep. When I plug it back in and press the power button it wakes up, and I can use it.
This cannot be a battery issue, since it was holding a charge without trouble yesterday. Does this appear to be a serious issue? My one year warranty expired 2 months ago yesterday, and I had forgot to purchase AppleCare. Sigh. It almost seems like surgically-planned obsolecense or punishment for not purchasing AppleCare.
I would immensely appreciate any help/suggestions on this.
Thanks.

OK, in that case:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion or Mountain Lion will not solve the problem.

Late 2011 Macbook Pro battery is toast, and I am not sure why!

I have had my late 2011 Macbook Pro for 3 years and 5 months. Before I left for vacation on July 28th my battery held 98 percent charge. I turned it off and put it in my closet. Now when I have came back my battery holds 2.2 percent, not even enough to be unplugged for a second (128mah). I of course expect my battery to go at some point but my battery has only been through 340 cycles and apples site says the max is 1000. Any suggestions into why my battery is dead after so few cycles? Additionally any suggestions into where I can buy a battery for my computer?

ipodperson1,
your battery holding 98% charge before you left for vacation doesn’t tell the most relevant information — what its Full Charge Capacity was then. Is 128 mA·h its current Full Charge Capacity, or its current Charge Remaining? That is, is the battery merely drained, awaiting a full recharge, or is it now unrechargeable?
You can buy a replacement battery for your MacBook Pro by taking it to an Apple store, or if you prefer to replace the battery yourself, you can buy a suitable battery from reputable third-parties, e.g. NewerTech batteries from OWC.

2011 Macbook Pro suddenly says no space available on start-up disk (plenty available) and USB drawing too much power (only charging phone). What's going on with my computer? No longer able to charge my iPhone 5.

Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

How do I uninstall Yosemite please ? Since I upgraded my 2011 MacBook Pro will not boot up

My 2011 MacBook Pro will not boot up following my upgrade to Yosemite. How do I uninstall or downgrade back to the previous version of OS please ?

You can't downgrade or uninstall unless you first erase the drive. Try the following:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post.

2011 MacBook Pro not holding charge

Similar Messages

Maybe you are looking for