2011 MBP not sleeping properly when power runs out

My macbook is behaving strangely. Every time the battery runs out, it doesn't sleep properly and restarts by itself when the power supply is attached.
The clock and date reset to 2001 but it is not a problem with the clock battery, this has been working fine up until the last few days.
The reason i say it is not the clock battery is because the actual power behaviour is behaving strangely. For example, the last time the battery ran out, the power indicator said there was still 3%/ten minutes left. The computer is cutting power before the sleep mode kicks in. Also, sometimes after the power cuts, when restarting the battery monitor shows 10 or 11 hours to recharge. The normal recharge time would be around 2.5 - 3 hours.
Also, just after a power cut with no sleep, when i am reconfiguring the lost settings, the processor maxes and stays that way, even when the computer is doing nothing.
I have tried resetting the PRAM and also an SMC reset but they are making no difference.
Anyone have any ideas? I already suspect this computer has malware on it but i think this particular problem is something else again...

I have to admit, I was not holding my breath. I have experienced this condition with on my own MBP twice this year. Once while running Leopard and once while running Snow Leopard. Both times it was only resolved after reinstalling the OS again.
I can't remember, though, if simply reinstalling the OS over the existing installation was sufficient or if I had to wipe the drive, reinstall the OS, and migrate my data back over. I assume you have a backup going.
The easiest thing to try first is insert the SL DVD and perform an installation. The default now is a variation of Archive & Install, where the OS is replaced without touching your user data. You don't need to make any special selections, just let the installer go.
In the event that does not work, and AFTER you have verified you have a current backup of everything, then insert the DVD and click the Options button, then click Restart in the window. This will reboot the Mac off of the DVD. At the Welcome splash screen go up to the Utilities menu and select Disk Utility. Then reformat your Macs' internal HD. Then proceed with the installation. Near the end you will be asked if you want to migrate user data over. Select the method of migration you wish (Time Machine, clone, etc...) and move your user data back.
Unfortunately, it is the only way I have resolved this issue if the earlier suggestions did not work. let us know what you decide to do. Cheers!

Similar Messages

MBP not sleeping properly, waking up every 2 hours

For a while now my MBP does not sleep properly. For example, last night I put it manually to sleep. Looking in the log I see it woke up every two hours.
I moved the Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist to the trash. No luck.
I did reset the PRAM and System Management Controller (SMC). No luck.
Anybody know what causes this and how to fix?
Thanks
log file from this AM:
16/05/2010 01:09:35 kernel hibernatepage_listsetall start
16/05/2010 01:09:35 kernel hibernatepage_listsetall time: 242 ms
16/05/2010 01:09:35 kernel pages 519043, wire 52766, act 187684, inact 91326, spec 3, zf 590, throt 0, could discard act 122317 inact 51265 purgeable 8976 spec 4116
16/05/2010 01:09:35 kernel hibernatepage_listsetall found pageCount 332369
16/05/2010 01:09:35 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 01:09:35 kernel IOHibernatePollerOpen(0)
16/05/2010 01:09:35 kernel writing 332137 pages
16/05/2010 01:09:35 kernel image1Size 99302400
16/05/2010 01:09:35 kernel PMStats: Hibernate write took 12173 ms
16/05/2010 01:09:35 kernel all time: 12173 ms, comp time: 2480 ms, deco time: 0 ms,
16/05/2010 01:09:35 kernel image 678409216, uncompressed 1360797696 (332226), compressed 675726752 (49%), sum1 c7de95a0, sum2 5f6f032b
16/05/2010 01:09:35 kernel hibernatewriteimage done(0)
16/05/2010 01:09:35 kernel sleep
16/05/2010 01:09:35 kernel Wake reason = RTC
16/05/2010 01:09:35 kernel RTC: maintenance alarm 2010/5/15 23:09:35, sleep 2010/5/15 21:09:53
16/05/2010 01:09:35 kernel System Wake
16/05/2010 01:09:35 kernel Previous Sleep Cause: 5
16/05/2010 01:09:38 configd[13] network configuration changed.
16/05/2010 01:09:51 kernel hibernate image path: /var/vm/sleepimage
16/05/2010 01:09:51 kernel sizeof(IOHibernateImageHeader) == 512
16/05/2010 01:09:51 kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xf0c805000, maxio 400000
16/05/2010 01:09:51 kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
16/05/2010 01:09:51 kernel hibernateallocpages flags 00000000, gobbling 0 pages
16/05/2010 01:09:51 kernel System SafeSleep
16/05/2010 03:09:51 kernel hibernatepage_listsetall start
16/05/2010 03:09:51 kernel hibernatepage_listsetall time: 241 ms
16/05/2010 03:09:51 kernel pages 518995, wire 52306, act 186725, inact 91189, spec 2, zf 590, throt 0, could discard act 122313 inact 51320 purgeable 10219 spec 4331
16/05/2010 03:09:51 kernel hibernatepage_listsetall found pageCount 330812
16/05/2010 03:09:51 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 03:09:51 kernel IOHibernatePollerOpen(0)
16/05/2010 03:09:51 kernel writing 330580 pages
16/05/2010 03:09:51 kernel image1Size 98721792
16/05/2010 03:09:51 kernel PMStats: Hibernate write took 12126 ms
16/05/2010 03:09:51 kernel all time: 12126 ms, comp time: 2471 ms, deco time: 0 ms,
16/05/2010 03:09:51 kernel image 677233152, uncompressed 1354420224 (330669), compressed 674559536 (49%), sum1 26bd31c7, sum2 92f72ed1
16/05/2010 03:09:51 kernel hibernatewriteimage done(0)
16/05/2010 03:09:51 kernel sleep
16/05/2010 03:09:51 kernel Wake reason = RTC
16/05/2010 03:09:51 kernel RTC: maintenance alarm 2010/5/16 01:09:51, sleep 2010/5/15 23:10:05
16/05/2010 03:09:51 kernel System Wake
16/05/2010 03:09:51 kernel Previous Sleep Cause: 5
16/05/2010 03:10:07 kernel hibernate image path: /var/vm/sleepimage
16/05/2010 03:10:07 kernel sizeof(IOHibernateImageHeader) == 512
16/05/2010 03:10:07 kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xf0c805000, maxio 400000
16/05/2010 03:10:07 kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
16/05/2010 03:10:07 kernel hibernateallocpages flags 00000000, gobbling 0 pages
16/05/2010 03:10:07 kernel System SafeSleep
16/05/2010 05:10:07 kernel hibernatepage_listsetall start
16/05/2010 05:10:07 kernel hibernatepage_listsetall time: 241 ms
16/05/2010 05:10:07 kernel pages 519856, wire 52672, act 186322, inact 91097, spec 3, zf 590, throt 0, could discard act 122331 inact 51323 purgeable 11187 spec 4331
16/05/2010 05:10:07 kernel hibernatepage_listsetall found pageCount 330684
16/05/2010 05:10:07 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 05:10:07 kernel IOHibernatePollerOpen(0)
16/05/2010 05:10:07 kernel writing 330452 pages
16/05/2010 05:10:07 kernel image1Size 99039744
16/05/2010 05:10:07 kernel PMStats: Hibernate write took 12187 ms
16/05/2010 05:10:07 kernel all time: 12187 ms, comp time: 2472 ms, deco time: 0 ms,
16/05/2010 05:10:07 kernel image 677464576, uncompressed 1353895936 (330541), compressed 674788528 (49%), sum1 e647b291, sum2 3a8aac2b
16/05/2010 05:10:07 kernel hibernatewriteimage done(0)
16/05/2010 05:10:07 kernel sleep
16/05/2010 05:10:07 kernel Wake reason = RTC
16/05/2010 05:10:07 kernel RTC: maintenance alarm 2010/5/16 03:10:07, sleep 2010/5/16 01:10:21
16/05/2010 05:10:07 kernel System Wake
16/05/2010 05:10:07 kernel Previous Sleep Cause: 5
16/05/2010 05:10:10 com.apple.launchd[1] (com.apple.newsyslog) Throttling respawn: Will start in 6 seconds
16/05/2010 05:10:15 ntpd[19] sendto(17.72.255.11) (fd=26): Can't assign requested address
16/05/2010 05:10:23 kernel hibernate image path: /var/vm/sleepimage
16/05/2010 05:10:23 kernel sizeof(IOHibernateImageHeader) == 512
16/05/2010 05:10:23 kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xf0c805000, maxio 400000
16/05/2010 05:10:23 kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
16/05/2010 05:10:23 kernel hibernateallocpages flags 00000000, gobbling 0 pages
16/05/2010 05:10:23 kernel System SafeSleep
16/05/2010 05:10:23 kernel hibernatepage_listsetall start
16/05/2010 05:10:23 kernel hibernatepage_listsetall time: 242 ms
16/05/2010 05:10:23 kernel pages 520172, wire 52398, act 186343, inact 91074, spec 3, zf 590, throt 0, could discard act 122371 inact 51663 purgeable 11204 spec 4526
16/05/2010 05:10:23 kernel hibernatepage_listsetall found pageCount 330408
16/05/2010 05:10:23 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 05:10:23 kernel IOHibernatePollerOpen(0)
16/05/2010 05:10:23 kernel writing 330176 pages
16/05/2010 05:10:23 kernel image1Size 98969600
16/05/2010 05:10:23 kernel PMStats: Hibernate write took 12185 ms
16/05/2010 05:10:23 kernel all time: 12185 ms, comp time: 2471 ms, deco time: 0 ms,
16/05/2010 05:10:23 kernel image 677498368, uncompressed 1352765440 (330265), compressed 674825472 (49%), sum1 83188ead, sum2 deb81330
16/05/2010 05:10:23 kernel hibernatewriteimage done(0)
16/05/2010 05:10:23 kernel sleep
16/05/2010 07:10:23 kernel Wake reason = RTC
16/05/2010 07:10:23 kernel RTC: maintenance alarm 2010/5/16 05:10:23, sleep 2010/5/16 03:10:37
16/05/2010 07:10:23 kernel System Wake
16/05/2010 07:10:23 kernel Previous Sleep Cause: 5
16/05/2010 07:10:25 kernel Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af08,0de1,0200,c5e1,2800]
16/05/2010 07:10:27 configd[13] network configuration changed.
16/05/2010 07:10:39 kernel hibernate image path: /var/vm/sleepimage
16/05/2010 07:10:39 kernel sizeof(IOHibernateImageHeader) == 512
16/05/2010 07:10:39 kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xf0c805000, maxio 400000
16/05/2010 07:10:39 kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
16/05/2010 07:10:39 kernel hibernateallocpages flags 00000000, gobbling 0 pages
16/05/2010 07:10:39 kernel System SafeSleep
16/05/2010 07:10:39 kernel hibernatepage_listsetall start
16/05/2010 07:10:39 kernel hibernatepage_listsetall time: 244 ms
16/05/2010 07:10:39 kernel pages 517502, wire 44961, act 186001, inact 94850, spec 2, zf 650, throt 0, could discard act 121084 inact 53722 purgeable 10262 spec 5970
16/05/2010 07:10:39 kernel hibernatepage_listsetall found pageCount 326464
16/05/2010 07:10:39 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 07:10:39 kernel IOHibernatePollerOpen(0)
16/05/2010 07:10:39 kernel writing 326232 pages
16/05/2010 07:10:39 kernel image1Size 89736192
16/05/2010 07:10:39 kernel PMStats: Hibernate write took 12150 ms
16/05/2010 07:10:39 kernel all time: 12150 ms, comp time: 2454 ms, deco time: 0 ms,
16/05/2010 07:10:39 kernel image 674849792, uncompressed 1336610816 (326321), compressed 672248688 (50%), sum1 469cef40, sum2 aeaa70ce
16/05/2010 07:10:39 kernel hibernatewriteimage done(0)
16/05/2010 07:10:39 kernel sleep
16/05/2010 09:10:39 kernel Wake reason = RTC
16/05/2010 09:10:39 kernel RTC: maintenance alarm 2010/5/16 07:10:39, sleep 2010/5/16 05:10:53
16/05/2010 09:10:39 kernel System Wake
16/05/2010 09:10:39 kernel Previous Sleep Cause: 5
16/05/2010 09:10:41 kernel Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,c5e1,2800]
16/05/2010 09:10:41 configd[13] network configuration changed.
16/05/2010 09:10:43 configd[13] network configuration changed.
16/05/2010 09:10:55 kernel hibernate image path: /var/vm/sleepimage
16/05/2010 09:10:55 kernel sizeof(IOHibernateImageHeader) == 512
16/05/2010 09:10:55 kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xf0c805000, maxio 400000
16/05/2010 09:10:55 kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
16/05/2010 09:10:55 kernel hibernateallocpages flags 00000000, gobbling 0 pages
16/05/2010 09:10:55 kernel System SafeSleep
16/05/2010 09:10:55 kernel hibernatepage_listsetall start
16/05/2010 09:10:55 kernel hibernatepage_listsetall time: 245 ms
16/05/2010 09:10:55 kernel pages 518601, wire 45482, act 186525, inact 94766, spec 4, zf 650, throt 0, could discard act 121083 inact 53749 purgeable 10262 spec 6080
16/05/2010 09:10:55 kernel hibernatepage_listsetall found pageCount 327427
16/05/2010 09:10:55 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
16/05/2010 09:10:55 kernel IOHibernatePollerOpen(0)
16/05/2010 09:10:55 kernel writing 327195 pages
16/05/2010 09:10:55 kernel image1Size 90391040
16/05/2010 09:10:55 kernel PMStats: Hibernate write took 12158 ms
16/05/2010 09:10:55 kernel all time: 12158 ms, comp time: 2460 ms, deco time: 0 ms,
16/05/2010 09:10:55 kernel image 676121600, uncompressed 1340555264 (327284), compressed 673513728 (50%), sum1 26607f1b, sum2 560cf77c
16/05/2010 09:10:55 kernel hibernatewriteimage done(0)
16/05/2010 09:10:55 kernel sleep
16/05/2010 09:32:54 kernel Wake reason = EHC2
16/05/2010 09:32:54 kernel System Wake
16/05/2010 09:32:54 kernel Previous Sleep Cause: 5

Martin Pace wrote:
If you've selected 'Wake on network access' in the Energy Saver preference pane it is normal.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27905.html
+
ménage-à-trois wrote:
Martin Pace wrote:
If you've selected 'Wake on network access' in the Energy Saver preference pane it is normal.
... +if you have a portable computer, selecting this option will wake your computer only if it’s plugged in and the _display is open_.+
that could be it, turned “Wake for network access” off. will report tomorrow.
Message was edited by: ChangeAgent

Why has my iBook started to completely shuts down when power runs out?

I purchased my iBook G4 in early 2006 (OSX 10.4.11)
Until last week, I would regularly use my laptop until the battery charge was used up. I would get a low charge warning and it would automatically sleep. I could then plug it in to charge. When it was plugged in, I could touch the track pad or power button and all of the programs that were open when the power ran out would be there, just as I left them.
This has recently changed. Now when the power runs out, I receive the same low charge message, but instead of sleeping, my computer completely shuts down. When I press the power button to reboot, everything starts back up fine, but I get a message that my date and time are off and need to be reset. I then go to the Date and Time menu, which automatically updates through my wireless connection.
My questions are:
1. Why is it shutting down instead of sleeping?
2. Why is my date and time reseting to an incorrect date and time?

The difference is that in the past, your battery shut the computer down when their was enough juice to safely sleep the machine. Now it thinks it has enough juice, but it's truly running out. The battery is necessary to maintain the date and time in the computer.
Your battery needs to be calibrated. You should follow the instructions at:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1959.html
This will allow the battery to truly know how much juice it has left.

2011 MBP not dimming on battery power

My new Early 2011 MBP is set to slightly dim the display on battery power and it is not dimming on battery power unless i go in to the energy saver preference and uncheck and recheck it then it dims slightly.

Yes, the case is a heat-sink; Apple call them "notebooks" not "laptops" and warn against having them against your skin.
"Do not leave the bottom of your MacBook Pro in contact with your lap or any surface of your body for extended periods. Prolonged contact with your body could cause discomfort and potentially a burn"
MacBookPro_UsersGuide page 107
Actually, you don't want heat near the battery itself as that's not good for li-ion, that should feel relatively cool?

Z2 double tap to wake up the screen is not working properly when taking it out of pocket

when i take my phone out of my pocket, the double tap function is not working properly, sometimes i have to tap over and over to wake up the screen.
do you know why? does same thing happen to yours ?
and please dont tell me not to use it. i have paid 700$ and i have right to use my phone fully functioning.
any advice ?

Actually it needs some practice, you need two gentle taps on the upper third of the phone (around the place where the clock shows on lock screen), tapping too hard or tapping on the lower part of the phone will require repeating the tapping more than one time. This is from my personal experience.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

MBP Not Sleeping Fully When Left Alone...

Hello,
I've noticed that if I'm away from my Macbook for a while it's not actually going to sleep as it should. The screen will go blank, and the sleep light is constantly on (not throbbing as it normally does in sleep) but the machine itself hasn't gone to sleep. I know because I can still hear my email alerts and I'm still logged into things like iChat and receiving message alerts etc.
My sleep settings are:
Battery: Comp sleep/2mins - Display sleep/1min - Put the hard disk to sleep when possible.
Power: Comp sleep/3mins - Display sleep 2min - Put the hard disk to sleep when possible.
Any advice / help much appreciated. Thanks in advance!

I have to admit, I was not holding my breath. I have experienced this condition with on my own MBP twice this year. Once while running Leopard and once while running Snow Leopard. Both times it was only resolved after reinstalling the OS again.
I can't remember, though, if simply reinstalling the OS over the existing installation was sufficient or if I had to wipe the drive, reinstall the OS, and migrate my data back over. I assume you have a backup going.
The easiest thing to try first is insert the SL DVD and perform an installation. The default now is a variation of Archive & Install, where the OS is replaced without touching your user data. You don't need to make any special selections, just let the installer go.
In the event that does not work, and AFTER you have verified you have a current backup of everything, then insert the DVD and click the Options button, then click Restart in the window. This will reboot the Mac off of the DVD. At the Welcome splash screen go up to the Utilities menu and select Disk Utility. Then reformat your Macs' internal HD. Then proceed with the installation. Near the end you will be asked if you want to migrate user data over. Select the method of migration you wish (Time Machine, clone, etc...) and move your user data back.
Unfortunately, it is the only way I have resolved this issue if the earlier suggestions did not work. let us know what you decide to do. Cheers!

My Adobe Flashplayer is not working properly when I run videos

To whom it may concern:
My operating system is Windows 7, my bowser is Internet Explorer 10, and I have the Adobe Flash Player 11.7.700.224 installed. Any video I play freezes up for a few seconds, then plays for a few seconds, then freezes again, and this cycle continues during play mode. Can you please help me?

What do you mean "Home" button working properly? I know your iPhone 4 is a newer design then my 3GS, but the home button is used to exit an application, etc.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing it again on my new computer?

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

My macbook pro 13-inch, Late 2011, is not charging properly.

My macbook pro 13-inch, Late 2011, is not charging properly. it charges for 4-5 seconds then stop and then continue. It charges normally when turned off. Could anyone care to explain what the problem is?

Hi OneManArmy_,
Thanks for using Apple Support Communities. I would try resetting the SMC and seeing if that allows the charge to work when the system is on:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
- Ari

Swf is not working properly when upload to server

I develop 1.swf which is having 3 buttons each one having
anather .swf to call 2.swf, 3.swf respectively.
This application is running perfectly on my PC, but
While uploading the swf to server the 2.swf and 3.swf is
not running. Can any one tell how to recover from this kind
of problem.

justbipin wrote:
> basically my code working perfectly,
> but its not working properly when upload to server
> can anybody having any ref. or link to solve this
issues.
why is that we insist on seeing the source file ?
There is no one way of doing things in flash and no one can
help
you based on "does not work description".
This is way to broad of a subject to even try to guess.
Same as asking "my car does not work, what's up with
that"....
Please upload the problematic file and provide url for us to
check.
Otherwise you need to try to troubleshoot it yourself as we
can't
guess from here what possibly is wrong with that file.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Why do the youtube clips not expand properly when I double click on the page

why do the youtube clips not expand properly when I double click on the page

The exclamation mark is telling you that iPhoto has broken the file path/link to the original file. Assuming you're using iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.

Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.
Device:iPad 4
OS:iOS8.0
Repro Steps:
1.Navigate to any page that virtual keyboard will be used.
2.Use your finger slide on virtual keyboard to make it in Column mode.
3. Hide the virtual keyboard in Column mode.
4.Tap on any field to use the keyboard again.
Actually result:
Background of Virtual keyboard not display properly when pop up in Column mode.(It's fine in iOS7)
Please refer to the image:

Are you running the latest Adobe Reader Version i.e. 11.0.1? Can you please share the file where you are encountering this issue to [email protected]?

2011 MBP not sleeping properly when power runs out

Similar Messages

Maybe you are looking for