2011 Server Trial: export to text missing
Help Please!
I must export a 2011 or XI rel2 report version to text with character spacing 0 and 0 page length (no page break).
This option is missing from the BI Launch Pad, as well as from the CMConsole.
The option is available in XIrel2, as well as available and working in Designer 2011 or what was called developer.
Jamie
2 Years, multiple people are asking this question.......Does anyone in support have a response for keeping the trailing spaces intact during export?
Similar Messages
-
Windows Server 2012 R2 Essentials Trial Key - Did I miss it, too?
I tried both "Windows Server 2012 Essentials" and "Windows Server 2012 R2 Essentials". Here is the link to the page I downloaded the images:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
The following are the respective links to the images I used which were provided by the above webpage:
http://care.dlservice.microsoft.com/dl/download/1/2/9/129AEC4F-1C6C-44B2-9B61-77935E8AB1F4/WindowsServer2012Essentials-English-Install.iso
http://care.dlservice.microsoft.com/dl/download/8/F/7/8F7024D2-AB2A-4BE2-8406-1E3AC49C5C1F/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO
I tried burning these images to DVD and booting my Intel NUC with resulting disc. Setup goes fine but it asks me for a product key. I have not received any mail nor was there any pointers to a product key. This is why I tried both R1 and R2.
I found a similar post here regarding this issue (in fact I found a couple):
http://social.technet.microsoft.com/forums/windowsserver/en-US/db7fd5b9-f58d-4456-86cf-816ec91ded14/windows-server-2012-trial-key-did-i-miss-it
But the answers were unsatisfactory, so please do not give me the same response.
Just in case the question/directive comes up, I redownloaded and re-burned the images using sector verification. There are no checksums posted on the site so who knows if something got broken while downloading it, but I find it extremely unlikely that
a few bad sector would cause the intaller to forget its evaluation key rather than borking the whole installer.
Further note that I tried "Windows Server 2012 R2" (standard / non-essentials) and that image correctly had the trial versions baked in. So, I would bet dollars to donuts the problem lies in the images not in a download / burn failure.
I want to use the new NUC as a central content/backup server for all the home computers which are unfortunately growing at bunny reproduction rates. Since Windows Home Server was discontinued, I was pointed to Server 2012 R2 as the alternative / upsell.
Let me know if this is the case or if a better-fit product exists.
Also, is the "Essentials" install a simply a licensing matter (e.g., 25 user cap) or is it more fundamentally crippled than the standard version? I am only a home enthusiast and so not really interested in using the product in a production environment.
I only want some ensurance that if I download "standard", I can put in an "essentials" key at the end of evaluation. If not, then please point me to a correct "Windows Server 2012 R2 Essentials" trial image.
Thanks,
RyanHi Ryan,
à
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
We can find following description from this TechNet Evaluation Center website. Then please check if you can
find product key.
In addition, for Windows Server 2012 Essentials, please check if you can use
HHRHF-YMNJW-RPGCC-VV68W-BWMVY. For Windows Server 2012 R2 Essentials, please check if you can use
R9N79-23MWD-MBP9B-KHF8Q-C36WX.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
SQL Developer 2.1.0.63 - Export Data menu missing for SQL Server databases
Hi
The Export Data menu only appears for Oracle databases in this version, it does not appear for SQL server databases.
To demonstrate:
Press F9 to run query
Right click on Query Result data
For Oracle an Export Data sub menu appears
For SQL server no Export Data sub menu appears
This worked in previous versions.
Is this functionality going to reappear?
Thanks
DaveHi,
Looks like this is exactly the same problem for third party connections as I have the exact same issue for mySQL.
I had to apply 1.5.5 version to fix it.
Hope we're going to have this solved !
Thanks,
JP -
SSRS Export to text and NOTHING BUT TEXT!
Is it possible to export a report to text only format? When I export my report to csv and then use the old DOS command to "type" the exported csv file there is a horrible little character at the beginning of the file.
I need to export just as text and nothing but text to drop the exported report into a 3rd party service which processes it. This squiggly little character is tripping the 3rd party system. I cant believe something so simple is not supported natively by SSRS?
I'm using SQL Server 2008 R2.
Please help!
LightSwitchShells.comHi Hale,
Please try to add the following text in the rsreportserver.config to work around the issue.
<Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering">
<OverrideNames>
<Name Language="en-US">TXT (Pipe Delimited Text File)</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter>|</FieldDelimiter>
<Extension>TXT</Extension>
<Encoding>ASCII</Encoding>
<NoHeader>true</NoHeader>
</DeviceInfo>
</Configuration>
</Extension>
By default, the rsreportserver.config is locate in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
There is a document about Export Tab Delimited text file in SSRS 2008 R2, you can refer to it.
http://revweblog.wordpress.com/2011/09/26/export-tab-delimited-text-file-in-ssrs-2008-r2/
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
Export to text procuding different results between SDK and Report Viewer.
We have a 3rd party app that uses Report Viewer v2.5.991 to generate reports. We use the export to text feature and specify 60 lines per page. This produces a report with 60 detail lines and a footer that comes after the sixty for a total of 64 lines per page.
I am a .NET developer and am using the CrystalDecisions SDK version 13.0.2000.0. I am using the same rpt file and automatically generating the text export using C# .NET. I am specifying TextFormatOptions LinesPerPage of 60. This is producing 60 lines total including the footer.
Is there an option I am missing in my code to produce the desired results?No such thing as Report Viewer v2.5.991. Not as far as I know anyhow...
Looking at the description of the TextFormatOptions property in the SAP Crystal Reports .NET API Guide:
Gets or Sets the number of lines per page to use when you export to text.
So, it looks to me like the property is behaving as expected. E.g.; it is the 3rd party that does something to get 64 lines per page. Perhaps setting the property to 64 will do the trick?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Export to text removes trailing spaces in XI R2
I've found an article that talks about the problem of the export to text removing trailing spaces, but the article mentions that this is fixed in Crystal Reports XI with a newer version of u2ftext.dll to version 11.0.0.941.
[1218375 - Trailing spaces ignored when exporting to Text format|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333333373335%7D.do]
I'm using Crystal Reports XI R2 and my u2ftext.dll version is already 11.5.11.1470.
I'm I missing something or is there another solution to the issue in XI R2?
Thanks,
Jeff2 Years, multiple people are asking this question.......Does anyone in support have a response for keeping the trailing spaces intact during export?
-
Many problems with the 'Export to Text' (.txt) in CR Xi
Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
ThanksHi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree -
Crystal Report 2008 export to text problem
Hello,
I am using Crystal Reports 2008 for generating reports in our WPF application. In this application, we are exporting the report to txt file on a button click. Now the application contains a form called u2018Print Manageru2019, through which the user can print the exported report(text files). Now the issue, when we try to the any of the exported report file through the application, the printer leaves alternate blank pages. The printer used in this case is DOT MATRIX EPSON LQ-1150II ESC/P2. We even tried printing the text file on HP Laser jet 4600, but the same issue is faced.
Also, please note that when I try to read the exported txt file, a formfeed(u2018\fu2019 page break) character can be seen at the place where the printer leaves a blank page. Hence, my concern is, Is there any property of crystal report that I am missing on or is this a printer driver issue? But if it would have been a driver issue, then changing the printer might have solved the issue.
I also tried doing u2018Keep Togetheru2019 property = false of all the sections of the report. Also, I found that the u2018New Page Afteru2019 property = true and disabled for the u2018Page Footeru2019 section. So I set u2018New Page Afteru2019 property = false programmatically as
rdTest.ReportDefinition.Sections["Section5"].SectionFormat.EnableNewPageAfter = false;
but no luck.
If anyone has faced similar problem or have any clues, please help!
Any kind of help in solving this issue will be highly appreciated.
Thanks in anticipation!Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek -
Unable to Export to Text when using Enterpirse
Post Author: dmface15
CA Forum: Exporting
I created a report in Developer and have the ability to export the report to a text file. However, when i saved to report to Crystal Server and run it I do not have the option to export to text. What is the difference and why the limitation?Usually your cd-burning-software should be able to show you if it supports CDText or not (for example Nero has it's own info-tool that informs you about all features of your drive).
But if your drive is only one year old it really should support CDText.
Windows XP iPod mini 2nd gen. -
Web Intelligence export to Excel misses some fields
Hi,
Our system is running BusinessObjects Enterprise XI 3.1 with SP3 (no fix packs). The behavior I'm seeing is when exporting a particular Webi doc to Excel.
Here is some background info for the document I am attempting to export to Excel. The doc contains a section and the section has a crosstab including description header cells. I have added an additional cell at the top of the section with section specific information in it- nothing that strange yet. If my InfoView (Web Intelligence) preferences is set so that 'Select a priority for saving to MS Excel' is set to 'Prioritize easy data processing in Excel' then the exported document is missing the additional cell at the top of the section (all other data is fine). If the setting is set to 'Prioritize the formatting of the documents' then the Excel export works perfectly.
My question is why would this be? The cell is just a simple dimension (string). My only fear about changing this Excel setting is that there is a warning in the 'Business Objects XI 3.1 Release Notes' guide. It states
Large Web Intelligence documents should be saved to Excel format using the "Prioritize data processing" option". The generated Excel might not open if the document is large and saved with the "prioritize formatting" option.
Thanks,
SteveWe are experiencing similar issue using BO 4 SP2 Patch 10 when exporting to Excel with setting 'Prioritize easy data processing in Excel'. Exporting data worked after changing WEBI settings to 'Prioritize the formatting of the documents'
Documentation regarding this option states following:
"Under "Select a priority for saving to MS Excel", select the option that best fits your needs:
u2022 If you want to display the data in a format that is similar to working in Web Intelligence, then
choose Prioritize the formatting of the documents.
u2022 If you want to display the data in a text format, then choose Prioritize easy data processing in
Excel."
If I understand this explanation correctly then both options should have extracted the same content to Excel. Difference should have been how the contents were formatted and should not have caused loss of information.
I logged support ticket for this issue. -
How do i get the trial version from text off my movie
how do i get the trial version from text off my movie
billwwww
What version of Premiere Elements is involved and on what computer operating system is it running?
Do you now have a purchased version of Premiere Elements?
You can not remove the Adobe watermark from an export from the tryout, be it an export of a file saved to the computer hard drive
or a burn to disc product.
But, you can remove the Adobe watermark from a project file (.prel) from the tryout. To do that, you open the project file from the tryout
in the purchased version. Then there are two possible scenarios
1. You go to Timeline Menu/Delete Rendered Files - the Adobe watermark is gone
or
2. You do nothing after you open the tryout project file in the purchased Premiere Elements. Many of us, including myself, have found
that opening the tryout project in the purchased program causes the watermark to disappear spontaneously.
Please let us know which works for you.
Thank you.
ATR -
SAP Content Server vs. Open Text Content Server
Hi,
We're currently trying to decide whether we implement SAP Content Server or an Open Text Content Server. We have the following requisites:
- Store documents (from FI, MM, HCM, etc.)
- Store SAP transactional data
- Use Archivelink
According to your experience what do you recommend?
Thanks in advance.
Regards,
RicardoHi Ricardo
Contact Open Text directly, they have a really nice presentation which compares the functionality from a technical perspective. Unfortunately I can't it here on their behalf but I'm sure they would be happy to send you a copy of it.
SAP don't recommend the SAP content server for long term archiving so if you intend doing data archiving Open Text is probably a better option.
Regards,
Athol
Edited by: Athol Hill on Feb 24, 2011 8:55 PM -
Exporting SMS text messages from the Treo 680
What options are available to export SMS text messages and call logs from the Treo 680? I need to create hard copys for evedence in a court case. I back-up files to the Palm Desktop on a Mac OS-X.
I have searched through the Palm guide, but no discussion on extracting the SMS data. I understand that the sms messages are in the file "Messages Database.pdb" and the call log is in "PhoneCallDB.pdb", question is how to extract the records.
This question was solved.
View Solution.Richard-Treo680 wrote:
What options are available to export SMS text messages and call logs from the Treo 680? I need to create hard copys for evedence in a court case. I back-up files to the Palm Desktop on a Mac OS-X.
I have searched through the Palm guide, but no discussion on extracting the SMS data. I understand that the sms messages are in the file "Messages Database.pdb" and the call log is in "PhoneCallDB.pdb", question is how to extract the records.
Google is your friend!
http://www.treodesktop.com/
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Post Author: hepburn
CA Forum: Exporting
I'm using Visual Studio 2005 Team Suite which I believes has Crystal Reports 10 installed.I'm trying to export to a text file. Here's the code I have so far: DiskFileDestinationOptions diskOpts = ExportOptions.CreateDiskFileDestinationOptions(); // set the export format ExportOptions exportOpts = new ExportOptions(); exportOpts.ExportFormatType = ExportFormatType.RichText; exportOpts.ExportDestinationType = ExportDestinationType.DiskFile; diskOpts.DiskFileName = AbsolutePath("c:/pleasework.txt"); exportOpts.ExportDestinationOptions = diskOpts; _crReportDocument.Export(exportOpts);Is RichText the only text option I have?? I've been googling and it sounds like I may need to install a dll to export to text. Can anyone confirm that?Thanks much...<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by David Brown ([email protected]):
Liv,
Just tried with an individual file export and this worked. What are you trying to export?
David<HR></BLOCKQUOTE>
null -
Export to Text failing when Report height is more than 23 inches
I have a problem while exporting to Text, when report height is more than 23 inches. It's failing with "an unhandled exception occurred in crw32.exe [3856]"
Both Crystal Reports 2008 and Crystal Reports XI Release 2 are failing. Export to PDF is working fine.
I am trying to design a lengthy report and export to text.
I searched in forum with out any results.
It would be great, if some body can point me in right direction. Thank you.
Regards,
RaveendraHi Raveendra
To work around this error message, disable DEP by performing the following steps:
1. Click Start > Settings > Control Panel.
2. Double-click 'System'. The "System Properties" dialog box appears.
3. Click the 'Advanced' tab.
4. Click 'settings' under 'performance'.
5. Click the 'Data Execution Prevention' tab
6. Select 'Turn on DEP for all programs and services except those I select:'.
7. Click 'Add'.
8. Browse for the application CRW32.exe. This file is located in:
C:\Program Files\Business Objects\Crystal Reports 12\
9. Select CRW32.exe and click 'Apply'.
10. Click 'OK' to close the 'System Properties' dialog box.
11. Log on as an Administrator and start Crystal Reports.
Now try to export report to the text format and observe the behavior.
Regards
Girish Bhosale
Maybe you are looking for
-
Hello I updated to the new itunes and now it will not work AT ALL! an error message comes up " Itunes cannot start because it detec ted an error in your audio configuration" Needless to say i did not change anything after i installed the new itunes.
-
ITunes won't open ; Apple software update error
When I double click iTunes, the computer thinks briefly (hourglass) then does nothing. iTunes won't load. QuickTime Player opens fine. But Apple Software Update now gives me a strange error message. Anybody know how to interpret it? Might it be lin
-
How to find the transport request which was released to Quality
Hi Friends, Could anyone please let me know, how to find the transport request that was already released from Development to Quality? there was some change in customization took place. I could find the user (through change log) who made these changes
-
Why the mac book pro bip even without alimentation?
Hi, I have a macbook pro 2,4 GHz Intel core 2 duo with 4 Go 1067 MHz DDR3 running with Mac OS X LION 10.7.4. I have a recurent Beep every 40 seconde (approxymately) and this even if there is nothing as power source. I took off the battery and the mac
-
Adding mail ids & Removing mail ids from the last step of process chain
Hi Can you please guied me how to do this. Adding mail ids & Removing mail ids from the last step of process chain. Thanks Subbu