2012 BMW 328I Bluetooth Problem

I realize this is not the most important problem but Im wondering if anyone else is having this problem - I get an error from the car (2012 BMW 328I) when I try to setup Bluetooth pairing with my iPhone 5 running IOS 6.0.1
Im wondering if anyone else is having this or a similar problem - I had an iPhone 4S running IOS 5.1 which worked fine so im wondering if this is an iPhone 5 or IOS 6 problem

got my bluetooth to work - must have been some temporary problem

Similar Messages

  • Original iphone/2.0 software/bmw 328i/bluetooth problems

    I have the original iphone; updated to 2.0. The bluetooth used to work great with the bmw - now with the 2.0, the phone locks up & major problems connecting, staying connected. Address book no longer syncs either. I re-paired the phone, but no dice. Any other ideas?...
    Thank you

    2.0.1 fixed the matter regarding the bluetooth....
    the address book sync has been an issue from the beginning... who knows..
    the phone is snappier... it works... I can live....

  • IOS6.1 and BMW X5 Bluetooth problem

    Couldn't find any result of Google so here I go:
    iPhone 4S and recently updated iOS 6.1 WILL NOT pair with 2011 BMW X5. The phone worked fine with my car bluetooh until I upgraded it to iOS 6.1. It will trying to pair for a few second then saying that "make sure the car's bluetooth is on or in range" I was sitting in the car! My other iPhone that is running iOS5.0.1 successfully paired with the X5.
    I know for sure this MUST BE iOS6 issue because the same phone (iOS6.1) successfully paired with my 2007 BMW 328i.
    Anyone else has the same issue since updating to iOS6.1?
    Pleaase fix this Apple.

    Never mind. I ended up deleting the pairing from both phone and car. Fixed.

  • HT204387 4s and 2012 Toyota Sienna bluetooth problems

    I have a 4S, and I am trying to connect with my 2012 Toyota Sienna bluetooth.  However, when the bluetooth is requesting to enter a password into my phone (last step), the phone goes into an ''non-connect'' mode. Please help...

    I had to delete the pairing and reconnect.  I set up both the phone and the Bluetooth audio.  It caused the problem and when I deleted the pairings and reconnected as a phone with internal audio it works fine for phone and media.

  • Connection with BMW car Bluetooth Problem. Curve 9320

    I have a problem with the connection with my BMW car (series 3 model 2012). I have a Curve 9320 BlackBerry with 7.1 bundle OS (V7.1.0.907, platform 9.49.0.98).
    When I connect the Blackberry to the BMW bluetooth everything works fine. After this though the Blackberry cannot  open anymore the files attached to the e-mails. If I reset the device by disconnecting the bactery and restart it soon after that the Black berry can open the files attached to the e-mail. It work fine until it connects again to the bluetooth of the BMW. So far this is the only problem I found, the other functions work just fine.
    Someone can help me?
    Thanks

    Yup, same issue.
    I have to disconnect the lead from the phone before answering a call.  Somewhat hard sometimes when driving...
    Current Devices: PlayBook 16GB, 64GB. Z10, Q10.
    Past Devices: Bold 9000, 9700, 9790, 9900. Torch 9800, 9810.

  • 2012 Mazda 6 Bluetooth Problems - Iphone 6

    Has anybody experienced the issue where the bluetooth connects but does not display the folders, playlists, and names of artist/titles.  I bought a 2012 Mazda 6 and have current IOS on phones.  It didn't work with Iphone 5 nor Iphone 6.  However, when I was in a 2014 Mazda 6 the same data streamed okay.
    Wondering if there is a fix available for this?

    Hi kanrf18,
    Welcome to Apple Support Communities.
    Take a look at the article linked below which describes a similar issue and provides a resolution for that issue.
    Get help connecting your iPhone or iPad to a Bluetooth accessory
    If that doesn’t do it, this article provides a lot of additional information and troubleshooting suggestions that'll resolve most Bluetooth related issues.
    iOS: Troubleshooting car stereo connections
    I hope this helps.
    -Jason

  • Sound & Bluetooth problems for lenovo G 560

        Sound & Bluetooth problems for lenovo G 560-
    Speakers create noise when increase the sound or change window.
    Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
    They appear again after restart.
    Warranty Status Lookup
    Product ID:        Type-Model:        Serial number:
    59304299        0679-N/A        CBxxxxxxxx
    Location:        Expiration date:        
    India                  2012-08-31        
    Moderator Note; s/n edited for member's own protection

    Hi lenovoG60,
    Welcome to Lenovo Community!
    You may want to try updating all of your machine drivers such as
    Lenovo Energy Management (power management)
    Bluetooth drivers
    Sound card drivers
    Chipset drivers
    Look for the drivers from our support site.
    Best regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • E71 Bluetooth Problem

    Got a Jawbone Prime last week.
    Tried to pair it with my E71 and succeed. After a while, it was disconnected. Then re-connect again... disconnected... connected and so forth.
    However, it works fine with my 6500c though.
    Please kindly help on this.

    I have the same problem where my Nokia E71 disconnects from my BMW carkit (E61) in the middle of phonecalls.
    This is very annoying, and introduced after I've installed firmware 300.21.012. My BMW dealer advises to install firmware 200.21.118.
    I've contacted Nokia support and they point to BMW. Mr. Mustafa of the Advanced Technical Care Team (Nokia Netherlands), doesn't understand that 2 parties are necessary to corporate to solve problems which are reported by multiple customers. besides of that, I think Nokia can't ignore the fact that more and more cars do have factory installed bluetooth carkits. There is no real conversation possible with Nokia. Since they think problems are always concerns to others. Nokia doesn't know the words problem and customer. So customer satisfaction is not a goal for Nokia.
    I've seen a couple of initiatives* around the web to catch this bluetooth problem. What I've done so far is
    - Deleted SMS inbox messages* 
    - Unpair the E71 and the BMW carkit
    - Pair the E71 with a 16-digit pass code*
    - Configure the server version as 1.2 (in stead of 1.1) in the PC suite synchronisation profile (for phonebook synchronisation)
    - Configure the bluetooth connection with my PC to Manual. 
    - Reboot my E71 after it has been synchronised with my PC (PC Suite) 
    For a premium brand, which Nokia say they are, customers shouldn't be bothered searching for problems which are caused by a firmware update. I will post all conversation and response of Nokia in this thread, so you all can see that Nokia support staff is very well trained to waive all responsibility.
    Message Edited by stealth99 on 14-Oct-2009 02:01 PM
    Nokia E71 fw: 500.21.009 hopefully has the solution for the Bluetooth disconnection problem with (non) nokia bluetooth carkits

  • BMW & iPhone bluetooth issues

    I just got a new 2008 BMW 328i this weekend and am trying to sync up my iPhone (original one - not 3G, but has the latest software). The directions seem easy enough, but I can't even get the iPhone to recognize the BMW bluetooth signal to enter the passcode to sync up. Am I doing something wrong? Your help would be greatly appreciated - thanks!

    I managed to get my wife's new iphone upgraded to 2.2, and then got it to "pair" with her 2000 X5. Not quite sure exactly how, I had to "fumble" around a fair amount, but as soon as it did "pair", I quickly quit!
    It will work - just that there are mis-matches in the instructions/display texts between BMW owner's manual, BMW display, and iphone documentation is, charitably put, sparse.
    Not sure if I could repeat without fumbling around again.
    Harvey

  • Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

    hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
    thanks for any reply.
    Rosone

    It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
    Check this in a different browser or access site in a differ OS.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you hel

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

  • How to Solve Wi-Fi or Bluetooth Problems on your iOS Device?

    Do you have any problem with Wi-Fi and Bluetooth on your iOS Device? Please read these steps carefully and follow it!
    These Steps that I am sharing are TESTED by 10 iOS users what had problems with Wi-Fi or Bluetooth or both and was successful
    - Please note that Resetting/Factory Resetting/Hard Resetting or Recovering or un-jailbreaking your device will not work at all -
    To Solve Wi-Fi Problems Follow these steps (But before doing anything please restart your iOS Device and see if you still have network problems):
    Step 1 Go to Settings > General > Reset > Rest Network Settings and Reset your Network Settings and wait until your device re-boots
    Step 2 Go to Settings > Wi-Fi and see if you can connect to your Wi-Fi If you can't then go to next step
    Step 3 Go to Settings > Airplane Mode and turn on Airplane Mode and shut down your device. Go to your network provider and ask to restart the Modem or do it your self (Just unplug power cord and plug it back in) You have to wait 30 seconds.
    Step 4 Boot your device and go to Settings > Airplane Mode and this time turn if off and go to Wi-Fi and see if you can connect it again. If you can't then go to next step - Note: If you are going on to Step 5 it means that your device is experiencing Critical System Error that cannot be fixed easily -
    Step 5 Go your laptop/desktop and open your browser then type this on the webpage search bar 192.168.0.1 and click enter. If it doesn't work then go and ask your network provider for an address for your modem/internet settings.
    Step 6 Change your modem/internet settings to no password and make it "available/visible for everyone" and go to your iOS device and got to Settings > Wi-Fi and see if it works this time. If it still doesn't work go to next step - Note: If you are going on to the next step it means you are experiencing Critical System Error that had been cause by glitch/bug -
    Step 7 Connect your iOS Device to iTunes on your laptop/desktop and update your iOS version -Note: this process if basically re-installing your operating system- If you can't update if because the new update if not available you have to wait for next update unfortunately
    Step 8 After updating your iOS Device Go to Settings > Wi-Fi and see if it connects to your Wi-Fi. It normally fixes the problem but if it still doesn't, it means your device is experiencing hardware problem. Visit your local Apple Retail Store or reseller and ask them for complimentary/device-exchange/warranty help or go to Apple website for online support: www.apple.com/support/ for better support.
    To Solve Bluetooth Problem all you need to do is resetting (not factory resetting) your device and see if it works, if it doesn't you will need to update your iOS or Google for more technical troubleshooting because it could be your pairing device's problem. Visit www.apple.com/support/ for better support.
    If anyone of you had these experiences and was successful troubleshooting please do share your experience. I will also be avaliable to answer your questions if you have one! Please do share your openions about my post if you have one

    If you don't mind, would you do that for me please?

  • Bluetooth problems all around - Modem in the first row.

    Hi there,
    I've got a really annoying problem with the Bluetooth Setup of my Mac. Like you can see in my system description, I use Mac OS X 10.5.6. For a long time I used my old mobile via Bluetooth and GPRS as a Modem. Now it was time for a change. I bought a new mobile which supports 3G (Nokia 5800 Xpress Music).
    I used the Bluetooth Wizard and told him to use all possible bluetooth functions of my device. I looked in the internet for the right configuration (APN, CID,...) and choosed to use the Nokia GPRS/3G Modem script which is preinstalled in Mac OS X (I also tried another one from www.taniwha.org.uk, it didn't work either).
    The very strange thing is, the first connection worked without any problem, but after disconnecting and reconnecting it didn't work anymore. Instead I've got a message that the RFCOMM-Channel can't be opened.
    I tried to fix the problem myself by searching wrong settings in some plists, but although I restored the original settings after recognizing that my changes didn't work, I've got a new problem.
    Now the status symbol of the bluetooth modem always shows up that no modem configuration could be found, although I can still try to connect via Network -> Bluetooth. Of course it doesn't work this way too.
    Sometimes the bluetooth modem works once after a reboot ( not after every reboot ). But only once!
    File Transfer always works! The Nokia Multimedia Transfer also always works.
    I definitely need advice of some of you, experts.
    I'd love to hear from you!

    Hi,
    sorry, but the problem isn't solved yet. I tried different things but nothing helped:
    I backuped and deleted the following Files:
    /Library/Preferences/SystemConfiguration/Preferences.plist
    /Library/Preferences/com.apple.Bluetooth.plist
    /Users/benutzername/Library/Preferences/ByHost/com.apple.BluetoothHASH.plist
    But it didn't help. In fact it made things worse. Therefore I restored the backuped files.
    I deleted all bluetooth devices and installed just my new phone a bunch of times. - No change at all.
    I used FSEventer to control the Filesystem Access. That leaded me only to the files mentioned above.
    In the log-file:
    /private/var/log/ppp.log
    is the following error message logged:
    Failed to open /dev/cu.Bluetooth-Modem: Resource busy
    Up until now, I don't understand why this resource is busy.
    I figured out, that the modem works using a USB-connection. That isn't a satisfying solution but it works for now.
    Nevertheless I am still really interested in resolving the Bluetooth problem.

  • Bluetooth problem Yosemite

    I bought a new iMac 21,5 with wireless keyboard and the Magic Mouse.
    I've been using it for about two weeks now and everything was working fine, until i installed the new OSX Yosemite when it released.
    Now, about 10x an hour the computer loses the bluetooth connection with the keyboard.
    This is very annoying, since i use it for 3D drawing, and everytime it loses connection, i have to fill in the numbers again.
    I've read on the internet that a lot of people share these problems.
    Is Apple coming with a solution or update? Or can i fix this myself?
    Read something about resetting RAM etc as well. But since my computer is new, I dont think that'll do it.
    Thank you very much.

    I had the bluetooth problem where my MacBook Pro wouldn't reconnect to my external bluetooth keyboard after the initial connect when I upgraded to Yosemite. I found the solution in another thread from nashntk:  "everything were solved by resetting SMC Intel-based Macs: Resetting the System Management Controller (SMC)."
    So far, the SMC reset fixed all of my bluetooth issues after the Yosemite upgrade. And it seems to be an ongoing solution as one reset has allowed me to disconnect and reconnect again multiple times.

  • Airport & Bluetooth problems after 10.4.7 update

    (Note: I posted this in the Tiger forums and after no response, thought I'd try here.)
    Greetings,
    After updating to 10.4.7, my iMac G5 20" iSight exhibits occasional loss of signal strength in the Airport and poor or lost Bluetooth connections with the wireless keyboard and mouse.
    The Airport and Bluetooth problems happen together at the same time. I can see the Airport signal strength drop and seconds later the mouse starts becoming slow and I usually lose connectivity with my keyboard. After about 10 minutes, signal strength returns on both.
    The system is well isolated from interference, the cordless phone is a 5 ghz unit, and all cellphones have been removed from the room, but the symptoms continue. The wireless G router is only 3 meters away in the same room.
    I reapplied the combo 10.4.7 updater, repaired permissions, cleaned caches using Applejack, zapped the PRAM and reset the SMU but the problem still happens.
    Any suggestions? It is driving me crazy.
    Thanks in advance for any help.

    I'll add a "here, here". I have a 20" iMac G5 (1.8 GHZ). Since applying 10.4.7 I have had Bluetooth disappear twice. Disappear as in: keyboard and mouse no longer function and the bluetooth icon in the menu bar disappears. Power cycle works to recover the system. A far from elegant workaround.

Maybe you are looking for