2012 Essential R2 Backup unsuccessfull with error code 2147942634

Hi, a planned backup on win srv 2012 essentials R2 terminates unsuccessful with error code 2147942634 and the text "more data is abailable" when beginning backup with the EFI start partition. The other, usually follwing backup-locations,
do not start backup thereafter. Every 2nd backup seems to be affeted. Manually started backups work fine. Mike.

Hi Mandy,
some more monitoring gets these additional info:
- no, it's not a question about "backup once" or scheduled. Every second scheduled backups does not run (backup schedule ist daily 12:00 and 23:00. 12:00 backups are fine, 23:00 backups fail)
- the recommended article provides no help, but checking the event viewer windows aplication points to error ID 517:
- details to this error ID 517:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
  <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}"
/>
  <EventID>517</EventID>
  <Version>1</Version>
  <Level>2</Level>
  <Task>0</Task>
  <Opcode>0</Opcode>
  <Keywords>0x8000000000000000</Keywords>
  <TimeCreated
SystemTime="2015-03-02T22:02:44.547827700Z" />
  <EventRecordID>135619</EventRecordID>
  <Correlation
/>
  <Execution ProcessID="4648" ThreadID="11988" />
  <Channel>Application</Channel>
  <Computer>S12ER.SV.local</Computer>
  <Security UserID="S-1-5-18" />
  </System>
<EventData>
  <Data Name="BackupTime">2015-03-02T22:00:19.562212400Z</Data>
  <Data Name="ErrorCode">0x800700ea</Data>
  <Data Name="ErrorMessage">%%2147942634</Data>
  </EventData>
 </Event>
Mike

Similar Messages

  • SCOM 2012 SP1 "Task invocation failed with error code -2146232576"

    Hi,
    I`m trying to discover a Linux RHEL 5.9 Server which is in another untrusted domain and from the Discovery wizard I receive the following error:
    Task invocation failed with error code -2146232576. Error message was 0x80131700.
    Any ideas ?
    Greetings.

    Hi,
    @Simon, I restart the SCOM services and I also verify the UAC and it's disabled.
    @Mai Ali, thank you for you reply. I don't have a "&" symbol in my password, but only a "$" ..I hope it's fine.
    If the SCOM discovery doesn't work, I installed the agent manually on the Linux server.
    BTW I also use a "monuser" account configured using this procedure:
    http://social.technet.microsoft.com/wiki/contents/articles/7375.configuring-sudo-elevation-for-unix-and-linux-monitoring-with-system-center-2012-operations-manager.aspx
    I also verify the ports 22 and 5723 and are opened, but I also noticed that if you restart the scxadmin, is listening on HTTPS on port 1207.
    Now..if I try to re-discover the Linux server from SCOM, I receive the following error:
    "The pool managing the instance is not available or the location monitoring object cannot be found"
    Regards.

  • Time Machine. Backup failed with error code: 21

    Hi,
    I recently upgraded to Leopard 10.5.4 mainly for the time machine backup. I'm using a DNS-323 in a RAID1 configuration as the TM backup drive. Also I have the DNS-323 connected to my Airport Extreme through the ethernet to give NAS ability to my home network.
    After much hunting around the forums I got the sparsebundle created and copied to the DNS-323 share volume. See http://www.flokru.org/2008/02/29/time-machine-backups-on-network-shares-in-leopa rd/ My thanks to flokru.
    However, TM is still not working. The console messages have the following:
    Network mountpoint /Volume/Volume_1 not owned by backupd... remounting
    Network volume mounted at /Volume/Volume11
    Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle
    Backup failed with error: 21
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Has anybody else seen this error or better yet, got a fix for it?

    James,
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Actually, it is not TMs failure to mount the volume that is causing your failure to backup. I have received the same Console message using a Time Capsule. However, Time Machines' attempt to 'remount' the volume always succeeds and the backup goes through. That appears not to be your experience, but it is NOT because the volume is not being mounted. It is.
    *Mount Point Conflict (TMDisk-1)*
    NOTE: the following distinguishes “network drive” (the physical hard disk) from “disk image” (the sparsebundle file TM uses to backup to).
    First of all, I am convinced that the second mount point that is created (in your case Volume11) is due to the fact that you already had the network drive mounted on your desktop at the time of the attempted backup. Was that the case?
    When you manually mount a network drive the system creates a mount point in the /Volumes folder (Let’s call it TMDisk ). While that exists any attempt by Time Machine to mount the same disk will created a second mount point ( TMDisk-1 )
    Nevertheless, as I have observed, this doesn't seem to prevent backups from taking place successfully, at least on the Time Capsule. And according to your Console logs it appears that your volume is being ‘remounted’ successfully.
    *”The Backup Disk Image Could Not Be Mounted”*
    The real issue is Time Machines' failure to mount the disk image (sparsebundle) contained on your network drive.
    +Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle+
    +Backup failed with error: 21+
    More often than not this is due to having the Time Machine backup disk image (sparsebundle) mounted on your desktop during a backup attempt.
    Eject the backup disk image (sparsebundle) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    For more information, see an article on this here:
    [http://discussions.apple.com/thread.jspa?threadID=1715977]
    Alternatively, a backup disk image can fail to mount if there is a problem with your computer name.
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to THIS article [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    Let me know if any of this helps.
    Cheers!

  • Windows 2008 backup failed with error code '2155348040'

    Hello,
    For the backup of our Windows 2008 servers, we use Windows Server backup. On one of the servers the backup will not run. In the application eventlog of the server there is the following message:
    Log Name:      Application
    Source:        Microsoft-Windows-Backup
    Date:          2/16/2010 9:00:03 PM
    Event ID:      546
    Task Category: None
    Level:         Error
    Keywords:     
    User:          <user>
    Computer:      <computer>
    Description:
    Backup attempted at '2/16/2010 8:00:03 PM' failed to start, error code '2155348040'.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
        <EventID>546</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-02-16T20:00:03.559Z" />
        <EventRecordID>33498</EventRecordID>
        <Correlation />
        <Execution ProcessID="4744" ThreadID="3516" />
        <Channel>Application</Channel>
        <Computer>...</Computer>
        <Security UserID="S-1-5-21-3054417077-3708097399-2792259940-500" />
      </System>
      <EventData>
        <Data Name="BackupTime">2010-02-16T20:00:03.559Z</Data>
        <Data Name="ErrorCode">2155348040</Data>
        <Data Name="ErrorMessage">%%2155348040</Data>
      </EventData>
    </Event>
    Does anyone know how to solve this problem?
    Best regards.
    Wilfred van der Heijden

    Hello Wilfred,
      thank you for bringing your concerns to us. 
      The error code  2155348040 indicates BLB_E_BACKUP_TARGET_SPACE_NOT_ENOUGH which happens if the target volume size is not
      sufficient to create a backup. In your case the total used space of source volume(s) could be greater than the space on the target volume.
      So please check the free and used space on the source volumes and retry the backup with the target volume space greater than that total
      space. We recommend the target volume size to be 1.5 times of the total size of all the source volumes for scheduled backups so that you
      can have sufficient number of backup versions stored.
      If you are using Block Level Backup then one other possiblity could be that your source volume is fragmented causing the backup size to be
      more than expected. If that is the case then retry the backup after defragmenting the source volume.
    Thanks,
    Bikash Agrawala [MSFT]
    --------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

  • Secondary DPM backup failure with error code 0x80070002

    Hello everyone,
    I have the following scenario:
    Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
    I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
    In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
    I am getting the following error while running a Consistency Check on Secondary DPM server:
    An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
    In the logs, I just see entries like this:
    1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
    1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
    1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
    1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
    1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
    In the DPM console, this data source status icon shows green, however no Recovery Point is created.
    Do you guys have any idea on why this is happening?
    Thanks for your cooperation.
    Best regards,
    Bruno Martins

    Does Volume C:\ on your primary server involves boot configuration data which is offline?
    This can happen due to installation of some 3rd party disk storage management solutions.
    The following blog has some details on how to solve file not specified errors:
    http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
    Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

  • BACKUP failure with error code sqlcode: -2419 with DB2 and SuSeLinux

    Hi,
    I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
    > SQL2419N The target disk "/dev/st0" has become full row=1
    Database error -2419
    I have kept the new tape but still getting the same error, My OS is Suse Linux and Database: DB2 9.7 FP4
    Please Help me with the solution
    Regards.
    Raju

    Dear Raju,
    Check this  & set the  "fsize"  parameter value.
    SQL2419N The target disk “disk” has become full.
    August 21, 2009
    SQL2419N The target disk “disk” has become full.
    Explanation:
    During the processing of a database utility, the target disk became full.  The utility has stopped and the target is deleted.
    User Response:
    Ensure enough disk space is available for the utility or direct the target to other media, such as tape.
    On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid.  Use the chuser command to update fsize.  A reboot may be necessary.
    On non unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the operating system.  Direct the target to other media, such as tape, or use multiple targets.

  • Backup failure with error code sqlcode: -2419 with DB2 and AIX

    Hi,
    I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
    Op Obj Timestamp+Sequence Type Dev Earliest Log Current Log  Backup ID
      B  D  20070603230002001   N    T  S0013124.LOG
      Contains 39 tablespace(s):
      00001 SYSCATSPACE
      00002 PSAPEL31GI
      00003 PSAPES31GI
      00004 PSAPDDICD
      00005 PSAPPOOLI
      00006 PSAPUSER1I
      00007 PSAPCLUD
      00008 PSAPSOURCED
      00009 PSAPBTABI
      00010 PSAPLOADI
      00011 PSAPCLUI
      00012 PSAPDOCUI
      00013 PSAPSTABD
      00014 PSAPPROTI
      00015 PSAPBTABD
      00016 PSAPPROTD
      00017 PSAPLOADD
      00018 PSAPSOURCEI
      00019 PSAPUSER1D
      00020 PSAPSTABI
      00021 PSAPDOCUD
      00022 PSAPPOOLD
      00023 PSAPDDICI
      00024 PSAPES46BD
      00025 PSAPES46BI
      00026 PSAPEL46BD
      00027 PSAPEL46BI
      00028 SYSTOOLSPACE
      00029 PSAPDIMD
      00030 PSAPDIMI
      00031 PSAPODSD
      00032 PSAPODSI
      00033 PSAPFACTD
      00034 PSAPFACTI
      00035 PSAPPEL640D
      00036 PSAPES640D
      00037 PSAPEL640D
      00038 ZSAPBTABD
      00039 ZSAPBTABI
        Comment: DB2 BACKUP PRD ONLINE
    Start Time: 20070603230002
       End Time: 20070604050110
         Status: A
      EID: 40823 Location: /dev/rmt1
    SQLCA Information
    sqlcaid : SQLCA     sqlcabc: 136   sqlcode: -2419   sqlerrml: 9
    sqlerrmc: /dev/rmt1
    sqlerrp : sqlubMWR
    sqlerrd : (1) 0                (2) 0                (3) 0
               (4) 0                (5) 0                (6) 0
    sqlwarn : (1)      (2)      (3)      (4)        (5)       (6)
               (7)      (8)      (9)      (10)       (11)
    sqlstate:
    can i know what is this

    Hello,
    that's what db2 ? tray to say:
    db2 '? sql2419'
    SQL2419N The target disk "" has become full. 
    Explanation:
    During the processing of a database utility, the target disk
    became full.  The utility has stopped and the target is
    deleted. 
    User Response:
    Ensure enough disk space is available for the utility or direct
    the target to other media, such as tape. 
    On unix-based systems, this disk full condition may be due to
    exceeding the maximum file size allowed for the current userid. 
    Use the chuser command to update fsize.  A reboot may be
    necessary. 
    On non unix-based systems, this disk full condition may be due
    to exceeding the maximum file size allowed for the operating
    system.  Direct the target to other media, such as tape, or use
    multiple targets. 
    I hope this is helpful for you.
    Best regards,
    Joachim Müller

  • Windows 7 backup fails with Error Code 0x80070002

    I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
    I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
    I'm running Windows 7 Home Premium, Service Pack 1, 64x.

    As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource. 
    If you have any feedback on our support, please send to [email protected]

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317

    Hello,
    Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
    I get the folowing error in smsts.log:
    ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    End program:  TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Here is the complete smsts.log: http://1drv.ms/1pwTEBf
    To explain the Problem in Detail:
    The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
    Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
    During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
    If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
    My Problem must be related to the different Domains and the forest trust.
    My Setup:
    MP published to DNS in both domains
    Schema Extended in both domains
    System Management Container published and verified in both domains
    ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
    Network Access account configured with Domain B account
    Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
    DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
    Any suggestions?
    Many thanks.
    regards,
    Christian

    Hi Christian,
    So do you actual get an error message in your TS or is it just failing to join Domain B?  (Could be both if the machines fails to join the domain).
    Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
    Also, if it a domain join issue, can you try manually joining to domain B using the same service account?

  • SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

    Hi
    I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
    In SMSTS log file error was "Release Request Failed with error code 0x80004005".
    Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

    I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
    In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
    Also make sure to update boot images, mdt packages, usmt etc. to new versions.
    So thats what I'd try first....
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • Sccm 2012 agent not installing with error CcmSetup failed with error code 0x80041013

    We have sccm 2012 r2 enviroment , when we deploy client agent to one DC , client agent is not getting install with below error .. I can able to install agent to all the machines except one DC.
    CcmGetOSVersion failed with 0x80041013
    CcmSetup failed with error code 0x80041013
    Any idea ?

    The error code 0x80041013 translates to:
    Provider load failure
    Source: Windows Management (WMI)
    Like Briij suggested, you should try to fix the WMI repository.
    Regards,
    Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

  • Error in push sccm client CcmSetup failed with error code 0x80070643 ccmsetup sccm 2012

    i want to push sccm client for all computer i enable automatic side-wide client installation 
     some computer get error code 0x80070643
    ccmsetup sccm 2012 this 
    when i tray manual installation get same error and ccmsetup.exe stopped 

    Duplicate of
    https://social.technet.microsoft.com/Forums/en-US/3bac4677-46b0-4d96-b63d-a819efcc7f35/error-in-push-sccm-client-ccmsetup-failed-with-error-code-0x80070643-ccmsetup-sccm-2012?forum=configmgrgeneral
    Please don't double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Transport control program tp ended with error code 0203

    when i import queue and transport queue from dev to prd ,error show:
    Transport control program tp ended with error code 0203
    Message no. XT200
    Diagnosis
    An error occurred when executing a tp command.
      Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
      Return code: 0203
      Error text: wrong syntax in tp call
      Request: DEVK900298
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary.

    Dear Allen,
    The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
    Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
    <b>tp Commands:</b>
    tp addtobuffer <request> <sapsid>
    As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
    Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
    All the steps of the entry are re-initialized.
    If the entry found is not an initial entry, the import step for the command file is set to *4000 .
    Before you call this command and its options, consider the effects of changing the import sequence.
    tp cleanbuffer <sapsid>
    This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
    tp delfrombuffer <request> <sapsid>
    If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
    Before you call this command, consider the effects of changing the import sequence.
    As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
    tp delstopmark <sapsid>
    If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
    tp export <request>
    This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
    tp reformatbuffer <sapsid> [options]
    This automatically reformats the entire buffer.
    As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
    However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
    If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
    Option downtorelease <Release>
    The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
    Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
    To avoid data loss, the original buffer is stored. In addition, you have the following functions:
    Displaying the unformatted buffer (using showbuffer <SID> )
    Displaying the original buffer (using showbuffer buffer=<SID>SAV )
    Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
    Resetting the changes (using reformatpuffer and the option Iagree no )
    If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
    If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
    Option Iagree
    Here are the following values for this option:
    yes ( true )
    Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
    In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
    no ( false )
    Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
    tp setstopmark <sapsid>
    A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
    If there is no stop mark, it is automatically generated by the commands
    tp import all <sapsid> and tp put <sapsid> .
    When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
    A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
    tp showparams <sapsid>
    This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
    tp verse <request>
    This creates versions of the objects in the specified request. This transport step is contained in command export .
    As of Release 4.5A, more actions that prepare the export are performed in this step.
    Thanks and Regards,
    Naveen.

Maybe you are looking for

  • HT201210 when i want to restre the iphone so i can see an error 3194 how i can solve this problem

    i am trying to restore the iphone through itunes and i can an error which is 3194 so how i can solve this problem

  • How to a copy a tif image to system clipboard and paster in MS Word

    import java.awt.image.RenderedImage; import java.io.IOException; import javax.media.jai.RenderedImageAdapter; import util.TIFFFileHelper; public class ClipboardSupport implements ClipboardOwner{      public ClipboardSupport() {           super();    

  • Is using .Mac & iWeb slower than other hosts?

    I'm planning a total rehaul of my website http://www.davidshoukry.co.uk and I want to use iWeb and .Mac to build and host the site. I made a test site here: http://web.mac.com/dshoukry and it seems to load really slowly. Is this a feature of using .M

  • Slow print 1350

    HP PSC 1350xi all-in-one printer (driver version 2.0.4) started printing very very slowly and now is taking up to 20 minutes to print (before i lose interest). Also tried, unsuccessfuly to print in test mode. Nothing came out. When printing from comp

  • Problem in placing the background in ALV Grid display

    I have created one image of the business flow, and it have to be displayed in the background of ALV grid display. For this I have gone to T.Code –<b>OAER</b> , Given class name as <b>PICTURES</b> , Class type as <b>OT</b> , Object Key <b>BACKGROUND</