2012 Honda Accord // Software Upgrade from 7.1.x to 8.2

Hi, I just upgraded my iphone5 from 7 point something to 8.2. (I held off so long because of previous bad experience).
Now, I am unable to control the ipod/itunes through my Honda Stereo controls. When I try to advance a song through the steering wheel or through the deck, it refuses to do so. I can control the iphone/ipod from the phone just fine. But using that expensive upgrade that would make it easy and safe for me to control the ipod through car controls, forget about it. I just learned that I can't roll back to the version of IOS software that actually works, so is there anything else I can do?

CUC yes, for CUPS you need to review the CUPS compatibility info to find that out, for any other Cisco apps, also review the release notes to find if they're compatible or no. For 3rd party apps, check with the vendor
Sent from Cisco Technical Support iPad App

Similar Messages

IOS 8 no longer works with 2012 honda accord

I upgraded my iPhone 5 to iOS 8.0.2. When I connect via USB, I no longer am able to use my car (2012 Honda Accord) controls to play music. Also, while it does connect via BlueTooth, making phone calls is very difficult, it takes much longer to connect to HandsFreeLink than in the past. I have deleted the BlueTooth connection and reestablished a new pairing. Still have sluggish behavior. Is this an iOS 8.0.2 issue? Or a Honda HandsFreeLink issue? Both?

I have a similar issue where I cannot get email on an iPad running iOS 8.0.2. With the exception for some odd reason emails came thru between the hours of 22:00 and 00:30 last night. This morning, same thing, no emails showing up on the iPad, it just spins. I'll have to check to see if calendar entries work.

Looking for documnet to CDS Internet streamer software upgrade from 2.5.9 to 3.1 procdure

I WANT THE DETAILED PROCEDURE DOUCMENT TO DO THE SOFTWARE UPGRADE OF CONTENT DELIVERY SERVICE iNTERNET STREAMER FROM 2.5.9 TO 3.1 IMAGE

kkrm333 wrote:
Hi,
We have EBS 11.5.9 with 9.2.0.6 database.
For the upgrade of EBS to 12.1.3 and database to 11.2.0.3 what are the basic steps?
Can we directly upgrade 11.5.9 to 12.1.1?
Thanks,Yes you can. Please see (Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]) for the Path you have to follow.
Please also see these docs/links.
Oracle E-Business Suite Upgrade Guide Release 11i to 12.1
http://docs.oracle.com/cd/E18727_01/doc.121/e16342/toc.htm
Oracle E-Business Suite Release 12.1.3 Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_1213_available
11gR2 11.2.0.3 Database Certified with E-Business Suite
https://blogs.oracle.com/stevenChan/entry/11gr2_11_2_0_3
https://forums.oracle.com/forums/search.jspa?threadID=&q=11i+AND+R12+AND+Upgrade&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

ASA5510-BUN-K9 software upgrade from 7.0(4)12 ??

I just purchased this firewall from govconnection.com and wondering about software upgrades. It has above ASA version software and ASDM 5.0(4) software.
It appears I need to somehow attain PICA and verification keys and whatnot - I've inquired with my seller to see if they can provide that -
but also curious if the newer version of software is desireable enough to jump through all these hoops? Or perhaps I'm missing some simpler method of updating software on this unit?

Hi,
Basically, if you just buy an ASA (or any Cisco box) without purchasing any support then you get what's called "warranty", which entitles you (usually) to 90 days of hardware support and software maintenance updates.
Unlike IOS, it's not too well documented what qualifies as a maintenance update on ASA but it's probably only the latest build of 7.0(4) if your box came with 7.0(4). Within 90 days the hardware replacement SLA is 10 days - after 90 days it's time & materials at Cisco's discretion.
The point I'm trying to make is that Cisco's warranty is rubbish - you're more or less forced into buying smartnet whether you like it or not (unless you're in the habit of discarding failed hardware and simply replacing with a handy spare..)
That said, smartnet has fantastic value, as follows:
1) new hardware delivered with or without an engineer (up to 24x7x2)
2) a license to install any and all software updates (for your purchased feature set)
3) Access to the TAC 24x7
Here's the full list:
http://www.cisco.com/application/pdf/en/us/guest/products/ps2978/c1592/cdccont_0900aecd8042b4d6.pdf
So, whenever you buy Cisco kit you should always be thinking about buying a smartnet contract (there are separate services to cover IPS devices, and software-only products like callmanager) unless you only want it for 90 days and you don't care about the 10 day warranty replacement SLA.
Finally, if you really don't want the hardware support, but you do want the software, then you can simply purchase the particular version you want for a one-off payment (but it won't be very cost-effective if you upgrade a lot - and a years smartnet contract might even be cheaper..)
HTH - plz rate if useful.
Andrew.

I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Software upgrade from biobench

Hi,
I've inherited a BNC-2090 I/O unit with a PCI-MIO-16XE-50 board and NI-DAQ
6.9.3 driver. This is all fine except the biobench v1.2 software for NT/95
is not good enough for us. I need to have real processing and analysis over
several channels. Can you recommend a software upgrade or change of software
that could meet my specs with this hardware? If possible could you also
provide quotes for the recommended options.
Many thanks in advance,
Andrew

Hi Andrew,
LabVIEW is well suited for this type of application, and the PCI-MIO-16XE-50 is supported by the latest NI-DAQ driver, NI-DAQ 7.4 which you can download.
For more information about these products, please see the links below: (please be aware that there are three versions of LabVIEW, base, full and professional development systems, each offering different analysis functions).
http://www.ni.com/labview/
http://digital.ni.com/softlib.nsf/websearch/90B60D5899BCCCDB86256FC700581B89?opendocument&node=132060_US
If you wish to speak to someone in sales for a quote please telephone our sales office (UK) on 01635 523545.
Hope this helps.
Hannah
Applications Engineer
National Instruments

UC540 software upgradation from 12.4 to 15.1.4M4

Hi
I have UC540 and running 12.4, SPA525G2 phones are not supported in this.
I want to upgrade to UC540-8.6.0.zip, I have already downloaded the file.
Can anyone suggest how to upgrade UC540 and is there any upgrade license required for upgradation?
254464K Flash memory is sufficient for upgrade ?
Also phone has version 7.4.8, will it upgrade new firmware after upgradation directly.
Pls. provide me suggestion and feedback.
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(24)SB, RELEASE SOFTWARE (fc1)
Cisco UC540W-FXO-K9 (MPC8358) processor (revision 0x100) with 249856K/12288K bytes of memory.
14 User Licenses
10 FastEthernet interfaces
2 terminal lines
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 802.11 Radio
1 cisco service engine(s)
128K bytes of non-volatile configuration memory.
254464K bytes of ATA CompactFlash (Read/Write)
Rgds
Rajesh

Hi John
Thanks, I have upgraded UC540 software package. SPA525G2 Phones are registerd. But voicemail is giving busy tone.
Any hint, why VM is giving busy tone.
I have done the voice mail cnfiguration. CUE clock state shows unsync.
UC540#service-module integrated-Service-Engine 0/0 session
takes me to this prompt,
se-10-1-10-1#
I can see VM users i have created via CCA
Here I have attached debug ccsip outputs
UC540#debug ccsip calls
SIP Call statistics tracing is enabled
UC540#
000517: Jul 10 18:33:08.499: //182/87C05D54817C/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x88943058
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 2001
Called Number            : 2099
Source IP Address (Sig ): 10.1.10.2
Destn SIP Req Addr:Port : 10.1.10.1:5060
Destn SIP Resp Addr:Port : 10.1.10.1:5060
Destination Name         : 10.1.10.1
000518: Jul 10 18:33:08.499: //182/87C05D54817C/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : No Codec
Negotiated Codec Bytes   : 0
Nego. Codec payload      : 255 (tx), 255 (rx)
Negotiated Dtmf-relay    : 0
Dtmf-relay Payload       : 0 (tx), 0 (rx)
Source IP Address (Media): 10.1.10.2
Source IP Port    (Media): 16868
Destn IP Address (Media): -
Destn IP Port    (Media): 0
Orig Destn IP Address:Port (Media): [ - ]:0
000519: Jul 10 18:33:08.499: //182/87C05D54817C/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 1
Disconnect Cause (SIP)   : 404
UC540#u all
All possible debugging has been turned off
UC540#debu
UC540#debug ccsip ?
all        Enable all SIP debugging traces
calls      Enable CCSIP SPI calls debugging trace
dhcp       Enable SIP-DHCP debugging trace
error      Enable SIP error debugging trace
events     Enable SIP events debugging trace
function   Enable SIP function debugging trace
info       Enable SIP info debugging trace
media      Enable SIP media debugging trace
messages   Enable CCSIP SPI messages debugging trace
preauth    Enable SIP preauth debugging traces
states     Enable CCSIP SPI states debugging trace
translate Enable SIP translation debugging trace
transport Enable SIP transport debugging traces
verbose    Enable verbose mode
UC540#debug ccsip err
UC540#debug ccsip error
SIP Call error tracing is enabled
UC540#
SIP: (184) Group (a= group line) attribute, level 65535 instance 1 not found.
UC540#u all
All possible debugging has been turned off
UC540#debug ccsip med
UC540#debug ccsip media
SIP Call media tracing is enabled
UC540#
000520: Jul 10 18:33:56.451: //186/A4584F0B8188/SIP/Media/sipSPICopyStunConfigFromPeerToCCB: Firewall traversal is not enabled
000521: Jul 10 18:33:56.451: //186/A4584F0B8188/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.1.10.2
000522: Jul 10 18:33:56.451: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 18698 for stream 1
000523: Jul 10 18:33:56.451: //186/A4584F0B8188/SIP/Media/sipSPIAddSDPMediaPayload: Preferred method of dtmf relay is: 6, with payload: 101
000524: Jul 10 18:33:56.451: //186/A4584F0B8188/SIP/Media/sipSPIProcessRtpSessions: No active streams.
000525: Jul 10 18:33:56.451: //186/A4584F0B8188/SIP/Media/sipSPIAddStream: Adding stream 1 of type voice+dtmf (callid 186) to the VOIP RTP library
000526: Jul 10 18:33:56.455: //186/A4584F0B8188/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.1.10.2
000527: Jul 10 18:33:56.455: //186/A4584F0B8188/SIP/Media/sipSPIUpdateRtcpSession: sipSPIUpdateRtcpSession for m-line 1
000528: Jul 10 18:33:56.455: //186/A4584F0B8188/SIP/Media/sipSPIUpdateRtcpSession: rtcp_session info
        laddr = 10.1.10.2, lport = 18698, raddr = 0.0.0.0, rport=0, do_rtcp=FALSE
        src_callid = 186, dest_callid = -1, stream type = voice+dtmf, stream direction = RECVONLY
        media_ip_addr = - , vrf tableid = 0 media_addr_type = 1
000529: Jul 10 18:33:56.455: //186/A4584F0B8188/SIP/Media/sipSPIUpdateRtcpSession: No rtp session, creating a new one
000530: Jul 10 18:33:56.455: //186/A4584F0B8188/SIP/Media/sipSPICreateRtpSession: stun is disabled
000531: Jul 10 18:33:56.471: //186/A4584F0B8188/SIP/Media/sipSPIDestroyRtpSession: stream:8B92A2BC
UC540#
UC540#
Software Version
Cisco Unity Express version (8.6.3)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc.
Components:
- TimeCardView version 8.6.3
- PhoneConnect version 7.0.0
- CUE Voicemail Language Support version 8.6.3
- Monitor Agent version 7.0.0
- Madrox Multi-app Support version 8.6.3
Licenses
voicemail enabled: 6 ports, 6 sessions, 65 mailboxes
ivr disabled, no unexpired installed ivr session license available
SOftware Package
Installed Packages:
- Installer (Installer application) (8.6.3.0)
- ServiceManager (Multiple Service Manager) (8.6.3)
- Thirdparty (Service Engine Thirdparty Code) (8.6.3)
- Bootloader (Primary) (Service Engine Bootloader) (1.0.3)
- Infrastructure (Service Engine Infrastructure) (8.6.3)
- Global (Global manifest) (8.6.3)
- Auto Attendant (Service Engine Telephony Infrastructure) (8.6.3)
- Voice Mail (Voicemail application) (8.6.3)
- Bootloader (Secondary) (Service Engine Bootloader) (1.0.3.0)
- Core (Service Engine OS Core) (8.6.3)
- GPL Infrastructure (Service Engine GPL Infrastructure) (8.6.3)
Installed Plug-ins:
- TimeCardView (TimeCardView AddOn) (8.6.3)
- PhoneConnect (PhoneConnect Application) (7.0.0)
- CUE Voicemail Language Support (Languages global pack) (8.6.3)
- Monitor Agent (Monitor Agent) (7.0.0)
- Madrox Multi-app Support (Multi-app support) (8.6.3)
- CUE Voicemail US English (English language pack) (8.6.3)
ClockTimezone
11:36:31.334 PDT Tue Jul 10 2012
time zone:                              America/Los_Angeles
clock state:                            unsync
delta from reference (microsec):        0
estimated error (microsec):             16384000
time resolution (microsec):             1
clock interrupt period (microsec):      10000
time of day (sec):                      1341945391
time of day (microsec):                 760788
Pls. suggest.
Rgds
Rajesh

HT201210 When I try to do a software upgrade from 4 to 6 on my ipad I get a Network error message. i have full internet access. Any ideas?

I am trying to upgrade my ipad ios 4 to IOS 6 or above. I get a network error code saying the ipad upgrade server cannot be contacted. I do have full internet access on a high speed connection. Any suggestions?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

CSS Software upgrade from sg0720003 to 8.20 questions

Questions:
1. To go from 7.20.3 to 8.20.x - do I need to go to a intermediate version first.
2. On Cisco Softwrae Sownload site for CSS, I can see 3 files as follows:. Which one do I use to upgrade?
sg0820303.adi
Release Date: 04/Aug/2009
WebNS Operational Software Image
Size: 69153.70 KB (70813388 bytes)
sg0820303.adi-gz
Release Date: 04/Aug/2009
WebNS Operational Software Image
Size: 23132.62 KB (23687797 bytes)
sg0820303.zip
Release Date: 04/Aug/2009
WebNS Operational Software Image
Size: 20292.92 KB (20779946 bytes)
3. Any gotchas / traps to remember before the upgrade.
4. Is the prefered upgrade method - Manual or Automatic - Any advantages / disadvantages of either method?
5. Is there a document with the upgrade procedure only?

Hi,
You need to upgrade to an intermediate version of the software before you can upgrade to 8.20. Acceptable versions are 7.30.4.02, 7.40.2.02 and 7.50.1.03. This is documented in Appendix A of the CSS 8.20 Admin manual - as is the upgrade procedure. AFAIK this is the only document that describes the update process.
For the upgrade you can use either the .adi or .adi.gz file - the CSS will automatically decompress the gzip version if you choose to use it.
Check the Release Notes for any changes to syntax for commands that you use.
I've used the automatic update process - assuming that the script would know what to do. I did make sure that I had backups of the config archived on the CSS and on the FTP server - along with certificates.
HTH
Cathy

Software upgrade from 10.5.8

how do i upgrae macbook osx software version 10.5.8 to current software

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Software upgrade from 10.4.11 to 10.5 or higher

Hi,
Help- Please. I can not seem to upgrade my iMac Intel run 10.4.11 to anything higher. (At least to a v 10.5)
Does anyone have any help, suggestions or instructions on how to upgrade my computer please.
I would be so very great full for any advise...
Kind regards,

Welcome to the Apple Support Communities
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, open  > Software Update to update to the most recent version.
Check if your computer is supported > http://www.apple.com/osx/specs Open App Store and purchase Mountain Lion. See if your programs are supported > http://www.roaringapps.com

Recent software upgrade from MF1 to ML1, internet freezing. Help please.

I recently did the latest upgrade to my phone, Samsung Galaxy S3, and everything is fine. However 90% of the time I am using the internet or google app, the pages freeze. I never got an error message ever before, but now I get a pop up message that says web page has become unresponsive, with an option to either WAIT or CLOSE PAGE. Is there anything I can do to get this to stop? Or should I download another internet app to use? I feel like it would just end up the same.
Please help if you can. Thank you.

No need to worry Everyone82! We would be delighted to assist with this issue. It simply sounds like the software was not fully installed properly. Have you attempted to erase the cache of the browser? Have you completed a full restore since update? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

Cisco MCU 3545 Software Upgrade from 5.5 to 5.7 Failure

Hi Guys,
When upgrading an 3545 MCU from 5.5 to 5.7 using the upgrade utility the upgrade failed and the MCU has become unavailable (luckily we were testing this in the lab). Upon connecting to console and rebooting we get the following error:
Main application started. Please wait...
Invalid application on Flash. Running Wakeup program.
And then it does nothing. Does not respond to HTTP or SNMP and is unusable. We can't perform the upgrade again as SNMP does not work.
Is there a way to restore the application to flash, via console or TFTP? I haven't had any luck finding documentation on this.
I can telnet to the MCU and login, but from there I don't see what else I can do. Does anyone on here have experience with this?
Kind Regards,
Giles

Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1
This is the official perpetual update download link.
It will also be a good idea to bookmark the following link, which provides official details of all Lightroom / ACR developments.
Lightroom Journal | Tips and advice straight from the Lightroom team.

Since software upgrade from 4.3 I have no indication that wifi is connected

Since updating to 4.3.3 on ipad2 there is no wifi connected icon at the top left of screen. Is that down to the software or have I missed something?

Yes, there's a limit, and that iPod touch has reached it.
(72099)

Software upgrades from v4.2 to v4.5

I want to use Documents to Go from Data Viz. It says that you need v4.5 to use it. The BB I have is v4.2. Can you just download 4.5 over the 4.2? Blackberry website is not intuitive enough for me on this.

As far as I have read there are a few beta versions out there, with bugs inlcuded as you'd expect, but the official version has not been generally released yet (although I believe Vodafone in Germany have made a buggy version available officially).
Take care,
Steve.

2012 Honda Accord // Software Upgrade from 7.1.x to 8.2

Similar Messages

Maybe you are looking for