2012 mac book pro boot camp low resolution gaming issues

I just bought my apple mac book pro 2012 (no retina display) a few months ago and i used to be able to play sky rim in boot camp in the highest resolution (ultra) but all of a sudden i can barley play it on the lowest settings?

Reset the SMC and try again.
http://support.apple.com/kb/HT3964

Similar Messages

  • Installing Windows XP 2002 Sp2 On mac book pro, Boot Camp

    I have a mac book pro and i want to install windows XP on it, but i ran into a problem.
    While using boot camp i followed the instructions and i got to the point where Windows XP is supposed to ask for partition drive, but in my case it gives me an error saying that Windows XP disc is not valid. I bought my Windows XP Sp 2 Disc at wal mart couple of years ago. It works fine on my HP PC but not on this one. What is the problem and why does it do that?

    You should ask in the Bootcamp forum http://discussions.apple.com/category.jspa?categoryID=237

  • Mac book pro Boot Camp / track pad

    Hello, recently i bought a Mac Book Pro- 15.4 inch- 2.4 ghz- I want to run windows on the computer as a dual boot using boot camp. I noticed that parallels has an option to sorta "steal" my curent desktop PC's information and use that as the windows part. Is there a way to do this with bootcamp so i do not need to re-purchase windows? if so please share :]. Also i dont know if this is normal or not but my tackpad (edge nearest the keyboard) seems like it doesnt have very much adhesive under it, because it starts sticking up like a sticker does when its running out of adhesive. is this something easily fixed by the genious bar, or do i need to leave it for awhile.
    Thanks for you help,
    James Gravis

    You should probably post your question in the Boot Camp discussions:
    http://discussions.apple.com/forum.jspa?forumID=1165

  • How do Dual Monitor with my Mac Book Pro (Boot camped with Windows 8) through my mini display port VIA Thunderbolt to a iMac (Model Mid 2011)?

    So I have a Mac Book Pro with a bootcamp Windows 8. I dual monitor on the Mac side with my Mid 2011 iMac through my mini display port via thunder bolt cable. In my perfect world, I would be able to switch to the Windows side and have the iMac mirror or extend my windows display for my gaming pleasure, etc. I'm not sure if it's just a simple driver or that it cannot be done. Please help. Thanks.

    so you want the notebook forum, not this one
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • Mac book pro / boot camp "answers" for dummies

    I followed the Installation and Setup Guide word for word...there were just a few words missing that really made it difficult, caused much frustration and almost had a mbp fly out a car window. I am a dummy!
    Always print off the Guide and read it first, I read it as I went along and that was a mistake.
    Step 1: Updating Firmware
    My MBP arrives June 19 and already had the firmware updates. I did need to update OSX to 10.4.7.
    Step 2: Download Boot Camp
    Visit http://www.apple.com/macosx/bootcamp/
    Click download. (here is where the installation guide failed to mention some key instructions) Before you can "Burn a Macintosh CD" you must follow the next few steps.
    a.) Agree to terms
    b.) Select the Macintosh HD
    c.) When its done downloading double-click the package icon on your desktop
    d.) Put in your blank recordable cd, go into your HD, Applications, Utilites folder, double-click the boot-camp icon.
    e.)This is where the installation guide picks up the rest of the instructions. A screen comes up that allows you to burn a macintosh driver cd. Follow the instructions in the guide.
    Step 3: Creating a partition
    In the guide they don't mention FAT or NTFS formats until after you create the partition. That was dumb! (if you read all the instructions first, instead of following along you would have partitioned differently)
    a.) FAT-Provides better compatibility, but must be 32 GB or smaller...now you tell me!
    Step 3 continued: Selecting the Windows partition
    Here they scare the crap out of you by telling you not to do anything other than select the C drive.
    a.) The first screen that comes up is the Windows XP Professional Setup, looks like the one in the Guide but without an option to select C:Partition3. Your only option was to "Install". My jaw dropped..now what??
    b.) Click install, the next screen gives you the options. (boy, I was lucky)
    c.) Remember what I said about the size of your partition and FAT vs NTFS
    Step 4: Installing Macintosh Drivers
    They mention here that there "may be" hidden windows that you must respond to or nothing will happen, THERE ARE GOING TO BE AT LEAST 3 HIDDEN WINDOWS....just be aware of that so your not sitting like a dummy waiting for stuff to happen
    The rest of the Guide is pretty word for word and easy to follow. Good Luck, hope this saves you some of the frustration I experienced, boy, do I feel dumb!
    Simple things you may need to know...
    1. "Right-click" by holding the control (ctrl) key and click the mouse at the same time.
    2. Select operating system by holding option key at start-up
    3. Back up your domain files if use iweb or else you will lose it all....talking from experience here!
    Good Luck

    Very nice write up.Should help more than a few dum...er,uh...people.
    Jim
    PowerBook G3 500 Mhz "Pismo" (Wonna buy it so I can get a MacBook?)   Mac OS X (10.4.7)  

  • My mid 2012 mac book pro is running at 6200 rpm how do I lower it

    my mid 2012 mac book pro is running at 6200 rpm how do I lower it

    I would open Activity Monitor (Utilities folder) to check and see if there is something using an inordinate amount of CPU cycles......select the CPU tab and click on the drop down menu from the top of that window.....choose (All Processes's).......double or triple %'s....will ramp up the fan...

  • My hard drive won't mount on 2012 mac book pro with retina display

    The flash drive in my Sept 2012 mac book pro with retina display is not mounted, won't mount,  and can't be repaired in disk repair.  I need files created right before it failed last night that were not backed up.  Can they be salvaged before a new warrantied drive is put in at my request?   Also is this failure a common problem? 

    I believe you hsave to first launch Setup Assistant:
    http://manuals.lacie.com/en/manuals/porsche-9233/connection

  • After stacking on top of my new macbook pro my old mac book pro boots but does not open the programms

    after stacking my old macbook pro 15 " on top of my new macbook pro 15" my old mac book pro boots but does not open any programms. It is not in sleep modus. What can I do?

    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405
    Best.

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

  • Mac Book Pro 17 inch screen - resolution??????

    I have just been told by an Apple help line that if I buy the Mac Book pro with the 17 inch screen and choose the "high resolution screen" option, then I am stuck with that resolution and it can't be changed onscreen to a lower res? This can't be correct surely???? Surely I can use the display settings to go to a lower res. if I don't like the higher setting???

    Hi! I'm not sure if you would be able to switch to a lower resolution, but I don't think you want to do it. Unlike old CRT-monitors, flat planels have a native resolution, and if you set them to another res, what you are doing is just resizing the picture (the monitor ONLY works at native resolution), therefore losing quality.

  • Hi all, my mac book pro boots up, but my track pad operation is strange, cannot click on anything, although it moves around screen ok. Cannot launch anything, nor close anything. Cannot get task bar to pop up either with the mouse movement.

    Hi All,
    My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
    I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
    I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
    Cheers
    Jazzy
    Message was edited by: Method TV

    Hi All,
    My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
    I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
    I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
    Cheers
    Jazzy
    Message was edited by: Method TV

  • Mac book pro not showing low battery waring

    hi....i bought ma mb pro arnd three months back.....from the past few days i have been observing tha my mac is not showing low battery warning when the battery is drained.....plz suggest me what should be done to overcome this problem....thanx...

    The first step is to try re-calibrating the battery, sorabh.
    See the instructions for this at http://support.apple.com/kb/HT1490
    You may also need to reset your SMC - see http://support.apple.com/kb/HT3964
    If the computer shuts down instead of sleeping when it runs out of charge try avoiding using it when it gets close to empty during the re-calibration process and just let it idle until it sleeps. Sometimes, when the battery is very low and badly calibrated , if you are using it a sudden demand for current can cause it to shut down suddenly instead.
    If the above processes don't fix it, then have a look under the Apple Menu > About this Mac > More Info and check in the "Power" section under "Hardware". Post the figures that are shown there for "Full Charge Capacity", "Cycle Count" and "Condition"
    Cheers
    Rod

  • Help needed on Mac Book pro boot issue.

    2015-04-13 20:20:31 +0530: Starting repair tool:
    2015-04-13 20:20:31 +0530: Checking prerequisites
    2015-04-13 20:20:31 +0530: Checking the partition list
    2015-04-13 20:20:31 +0530: Adjusting partition map to fit whole disk as required
    2015-04-13 20:20:31 +0530: Checking for an EFI system partition
    2015-04-13 20:20:31 +0530: Checking the EFI system partition’s size
    2015-04-13 20:20:31 +0530: Setting the EFI system partition’s size
    2015-04-13 20:20:31 +0530: Creating a new EFI system partition
    2015-04-13 20:20:31 +0530: Problems were encountered during repair of the partition map
    2015-04-13 20:20:31 +0530: Error: Couldn’t repair the partition map because a new EFI system partition couldn’t be created.2015-04-13 20:20:32 +0530:
    2015-04-13 20:20:32 +0530: : Couldn’t repair the partition map because a new EFI system partition couldn’t be created.
    2015-04-13 20:20:32 +0530:
    On my macbook pro, was running on Yosemite and suddenly on starting the system I see "prohibited" sign. After trying a lot of combination of keys,  I added external SSD and booted but it came up with Lion version.

    Greetings skewat,
    Welcome to the Apple Support Communities!
    I understand that your Mac is booting to a prohibitory sign. In this situation, to help resolve the issue, I would suggest reading over and working through the information in the attached article. 
    Mac OS X: Gray screen appears during startup - Apple Support
    Cheers,
    Joe

  • Mac book pro boot slow

    My MACBookPro 15"" MAC OS 10.7.5 takes a very long time for its boot process.
    The sign of apple appears fast but then you must wait and wait ... until I can fill in my name and my code.
    Aftrwards everything works properly.
    Please tell me, what can I do?
    Ludger

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Slow internet on 2012 Mac Book Pro

    Over the past 4 months the MacBook pro has been running slow when connected to the internet. The computer itself runs fine. Had installed Yosemite Beta, but the problem was occurring prior to move on Mavericks. Went to the Apple store and there was a hard rest of the computer, no improvement in internet speed.
    I run wireless diagnostics which tells me everything is running fine.  Another iMac on the network also running well. iPad and iPhones also running well.
    OOKLA speed test ping of 29 ms, download speed of 0.52 Mbps and upload of 1.67 Mbps.
    On ATT network rated for 54 Mbps.
    Info
    Interface name en0
    MAC address b8:f6:b1:15:dc:05
    Network name 2wire856
    Security WPA2 Personal
    quality Excellent
    RSSI -62 dBm
    Noise -91 dBm
    Tx Rate 48 Mbps
    Channel 9
    Channel Band 2.4 GHz
    Channel width 20 MHz
    Power state on
    Paired device count 2
    Primary IPv4 Interface en0
    IPv4 address 192.168.1.74
    IPv4 Router 192.168.1.254
    DNS serve 192.168.1.254
    IPv6 stuff is blank
    How to get my internet speed up again?

    Took computer to work, Wi-Fi is running faster but still slow process.
    OOKLA speed test
    ping 15 ms
    download 2.7 Mbps
    upload 7.27 Mbps
    Wireless Diagnostics Info
    Quality Good
    RSSI -74 dBm
    Noise- 85 dBm
    48 MPS
    Channel 1
    Channel Band 2.4 GHz
    Channel width 20 MHz
    Still the same difficulty wireless diagnostics testing well, actual speed on speediest poor
    going to tryhttp://www.s0hel.com/blog/401/fixed-slow-wifi-issue-with-new-macbook-pro/ for my home ATT network

Maybe you are looking for

  • Faces context not found

    hi, Created a sample application with struts-faces integration.i am providing the <welcome-file-list> tag entry in the web.xml.Now when i try to hit the deployed application, i get error "Cannot find FacesContext".I guess i am not supposed to provide

  • Sharing calenders

    is there a way to share calenders, lists or tasks with another person?

  • Dang! Here we go again!

    I had everything going great. Premiere saw my camera, I was able to upload video, g*d was in his heaven and all was right with the world, etc. But last night I installed my Corel Draw Graphics Suite 12, which no doubt you all know something about. I

  • HT204380 How do I receive facetime calls from someone not in my contacts?

    How do I receive facetime calls from someone not in my contacts?

  • Date selection in query

    Hi All,               I am getting error while executing one query in Bex. the error message is SYST:Date 11.00.2008 not expected(after that I was thrown out of the system) Date selection is handled by a variable on  Fiscal Year / Period called Bespo