2012 MacMini Dual display mini DP- DP and HDMI- DP not working
I have got this situation that I have to use mini DP->DP and HDMI->DP to connect to two Dell U2412M.
However, only mini DP->DP works okay, I have got nothing/no signal at all on the other one.
Also I can't see dual monitors nor show the display option on the top bar.
can I not use this setup or I miss something here.
Thanks
Looks like those Dell's support both DP and DVI input.
If so, you will need to use the Apple Supplied HDMI to DVI Adapter and a DVI-D cable to one of the Dell's.
Similar Messages
-
My ipad mini is disabled and password is not working
Ipad mini disabled and password is not working. Unable to get serial because can't unlock ipad. Have not previously synced with a computer.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Mini DisplayPort - VGA and MBP 2011 not working
Hi,
I can't get my 13" mbp 2011 to connect to VGA screens. I've bought a mini DisplayPort to VGA converter (an Apple one, not a no name) and if I connect a display over VGA the screen stays black. My mbp recognizes the display, I can see the display's model, resolution etc but no signal. I've tried multiple screens, none work.
I don't have other converters so I can't test if HDMI screens for example do work.
Anyone else having this problem?I have a 2011 13" i7 and am having the same issue when connecting it to my LG TV through the HDMI adapter. However when I connect it to my HP external monitor it works but it's VERY blurry... so blurry that it hurts the eyes to look at it for more than a few mins.
My previous MBP (2010 13") works fine however with both the TV and monitor. I even reconnected it just to make sure and they both work flawlessly.
I only have 14 days total to return this new MBP and 5 of those days are used up so if I can't get this fixed by then I have no choice but to return it and go back to my old MBP. -
HT1212 ipad mini is frozen and home button not working
my ipad mini home button is frozen and will not turn off. I have tried holding the home button and of/off button for more than a minute and will not respond or shutdown.
If the home button is not working, then the best option is a visit to an Apple store genius bar to have the techs check it out.
-
Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?
I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera -
FaceTime and iMessage are not working in iPad mini 2 wifi only model.
Hi ,
I am using iPad mini with retina display wifi only model. In my iPad everything is ok but FaceTime and iMessage are not working. In settings Removed my id and re-logined multiple times, but still they are not working. Please help me.Hi there Suryateja24,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
-Griff W. -
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
My iPad mini is dead and it will not charge.
My iPad mini is dead and it will not charge. I had it charge for 3 hours using the 10W usb power adapter but it wont charge. It does indicate that it is plugged in but it isn't charging. Please help me.
Hello KimMed165,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
Have a nice day,
Mario -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Our wifi is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
Cheers, Tom -
hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support. -
I inserted a mini CD (3") and it will not eject, how can I get it out??
I inserted a mini CD (3") and it will not eject, how can I get it out?? I tried a little shaking, and restarting and holding the mouse pad down. I heard the spinning but still cannot eject or read the disc.
Short of taking it to a repair shop for extraction, you can shut it down and try shaking the devil out of it.
-
Plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
If the reset doesn't work, you have to force iPad into Recovery Mode
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Maybe you are looking for
-
Mac OS 8.6 and Mac OS 7.6 - Older Game Software - Need Help!
I am new owner of an iMac OS X 10.4.8 system and have children who are wanting some educational games software games for Christmas- I have found some on E-Bay (ie. Where In the World is Carmen San Diego) however, the requirements are OS 8.6–9.2, OS X
-
How do I restore my Itouch to completely clean it out?
-
I cannot close the "Hand Tool" when I try tolopen another tool. I have tried closing and reopening Photoshop with a new file but get the same result.Can anyone help please? l
-
WLC 8510 7.5.102.0 image needed
Hi Guys, anyone can share 8510 7.5.102.0 image? our client need it urgently, on cisco web that image is deffered already. cant download any longer really appreciate if you can share, regards, Victor
-
Mac OSX lion issue sound [Audio Stops Work]
Hi. I have a mac book pro with mac os x lion, and something make my sound stops WORK! i unninstal the mac keeper but the problem was nor solved [I read this in another forum] When I play some sound a red light on the mini-jack port is turned on. The