2012 MBP will not boot after 10.8.4 update

Has anyone else had problems with booting to 10.8.4?  I have a 2012 15" MBP with dual boot 10.8.4 and Win 8 via BC on a single Seagate Thin SSHD 1TB.  Win 8 will boot but the OS X drive will not even mount during boot.  I tried single user, verbose, safe, fsck, DU, recovery all to avail because the system no longer recognises the drive because it will not mount.
Now, this same thing happened two weeks ago and I eventually replaced the stock Hitachi 1TB with the aforementioned Seagate.  I am now using the Hitachi as an external drive and it is working just fine after erasing/formatting. I refuse to believe it is a HDD issue seeing how Windows still boots fine. 
Does anyone out there have a long term solution?  I cannot believe that I need to completely wipe my drive every two weeks and reinstall/restore/recover my system.  I never had this problem prior to updating to 10.8.4.  Any help would be appreciated.

same **** happend to me after I updated my retina macbook pro I had to take it to the Apple store to have it reinstalled and updated

Similar Messages

  • MBP will not reboot after 10.6.8 update attempt

    This post may be a bit telescopic, since I'm posting from my phone, but here goes:
    Attempted 10.6.8 update from 10.6.7 on my late 2009 MBP. It went to a blue screen and then sat on that screen with a progress wheel for over an hour. I gave up at that point and simply restarted by holding down the power button and turning back on. It then went to a gray screen with the Apple logo and a progress wheel for a few seconds and then just shut down. I repeated this several times.
    Next, I booted into safe made without any problems. I went to the list of startup programs and chose to hide all of the third party apps, then rebooted into safe mode again.
    Here is where I started having issues. It went to the apple logo and progress bar for a few seconds then just shut down. I attempted several safe boots and got the same result over and over.
    I then put my install CD in the drive and rebooted holding down C. It went to a blank gray screen for about one minute, then spit out the CD and shut down.
    I booted into verbose mode and it did a check and got several errors and then just shut down. I attempted this multiple times with the same result.
    I then booted into single user mode and ran fsck -yf. It gave me several missing thread record and invalid extent entry errors followed by numbers and one line that said "Incorrect size for file GSUIcon.icns"
    Not knowing what to do with this, I typed tail /var/log/system.log to pull up an error report from around the time this may have started. I'm not sure how to get that text to my phone, but it doesn't say a while lot. Basically that a "terminate was called after throwing an instance of 'Security::CssmError'" then "bpf_write(en1) failed: network is down". There is amlittle more, but none of it tells me what really happened. I can send a picture of the error report from my phone if anyone wants to see the whole thing.
    At this point, I cannot boot into safe mode or from a CD, only into verbose or single user mode. Thoughts?
    Thanks folks!

    MetaKine issues with 10.6.8
    MetaKine hands off,  update to 1.3.1 before attempting aninstall of 10.6.8: the old version causes a kernel panic and will notallow booting after an update.  As it loads a kernel extension,safemode also doesn't work.
    Simple solution: boot OSX install DVD, run terminal from utilitiesmenu:
    code, enter and press return
    cd /Volumes/yournormalbootdisk/System/Library/Extensions
    mv HandsOff.kext /
    quit Terminal and reboot
    Then load Hands off app, and run the update it finds.

  • IMac will not boot after 10.10.2 update

    Hello all, I could really use some help. I downloaded 10.10.2 from the app store on my iMac (previously upgraded to Yosemite through app store), and when the system restarted, I would see the white screen with the apple logo and the progress bar about a third of the way across. then the system would ether restart or hang. Here is what I have done so far.
    1. I am unable to boot to recovery mode using 'command R'... nothing happens and it goes back to the apple logo and a progress bar that get to a third of the way and stops.
    2. I am able to press 'option' during boot and get 3 options for loading (system, recovery, and a Yosemite install disk i made on a USB). selecting any of these options returns me to the apple logo and the progress bar that gets stuck at a one third complete.
    3. I am able to select safe and verbose mode. the machine will sometimes get all the way to "system up time in milliseconds" before it reboots.
    4. I am able to boot to single user mode. I have run '/sbin/fsck -fy' until it no longer displays 'modification have been made' and it displays 'volume appears to be ok" (takes 2 runs). from here i have tried both rebooting, and exiting, both result in the white screen with the apple logo and the progress bar getting to a third of the way.
    5. i have tried clearing the NVRAM
    6. I don't have another mac with firewire or thunderbolt to try targeted disk mode
    7. i have had 1 success in getting to the log in screen using verbose mode. during the boot there was a whole screen of the same line repeated many times, it said "BUG in process suhelperdt[167]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external). after i logged in it reported that the system has un-expectedly shutdown, and that it would send a report to apple (is this a kernel panic?). i hit  yes and then show the details. then the system hung up, and rebooted. then hung up again during boot with the same "BUG" message above.
    I've got good time machine backups, and don't mind doing a complete reload if i can ever get to that option.
    Thanks in advance for the help.

    I have a 27 inch imac (10,1 late 09) that was doing the same intermittently during 10.10.2.  In a fit of frustration, I updated yesterday to 10.10.3 and now the computer is doing exactly as you describe.  I cannot get past the white screen at all.  I have booted into recovery, verified and fixed the drive even though it it checked out fine.  and attempted a fresh download on a clean partition.  nada...   i can get into safe mode, and I tried installing the SMC fan control, switching off transparency, and lowering my resolution.  none worked. 
    I was convinced my hard drive was dying (when I had 10.10.2), and replaced it last week with a SSD.  The SSD ran great for about a week, then had the same problems.  I never had a problem with 10.10.1 or prior.  I have checked my ram, and that does not fix the problem (swapping all four into the front dime slots in sequence). 
    This computer has run great since 09, and I have never had any issues until now, but it is now a very expensive paperweight. I cannot do the internet recovery that sets up the original OS the machine shipped with (too old for that feature), and it will not let me download a previous version of OS X from the app store (I have mavericks, lion, etc there). 
    I think my apple love affair is officially over.  Looks like i will be searching for a pre-yosimite computer to download a usb version of mavericks or lion, and I sure as **** am not buying another apple product in the near future! I was very close to pulling the trigger on a new macbook, sure glad I did not waste my money -again-.

  • HELP Mac Mini will not boot after 10.5.1 update

    After I tried installing 10.5.1 I received a warning message that the update will not be installed because of an error and I should contact the vendor. After that the Mini tries to reboot. It keeps repeating the process over and over. I have tried to do safe boot mode by manually turning off the computer and then restarting while holding shift, but nothing happens. Can anybody help?

    BBlades wrote:
    I think the problem might be with the external HDD I am running with this machine. I am reinstalling everything now from my time machine backup. I just added this hard drive the other night and it is loud as all **** and I believe it is why my machine has crashed. Before I added the drive, my system was running pretty good. It is a Calvary 160gb drive. I think I am going to have to send this POS back to newegg and get myself another Lacie drive, because my other Lacie is running smoothly.
    I'd go with the LaCie. I got two from Amazon, 320 and 500 and both are quiet, have 800MHz FW and I have had no problems with either of them. The new one also has a 3-position switch - Off/Auto/On which allows it to sleep when not being accessed when in Auto.
    I suspect that your external HD was the problem all along.

  • IPhone 3GS Will not boot after iOS 4.3 Update....

    I updated my wife's 3GS last night and when it was done it rebooted and started filling up the line under the apple logo like it always does after the software is loaded but after the bar fills up, the phone locks up and does not go past the apple logo with a full bar under it. - iTunes also locks up when you connect the phone. I've tried to restore it but it does the same thing.... any ideas?

    You're further than I am!! Mine's frozen on the apple with an empty progress bar. And absolutely nothing seems to be working. I've tried taking the SIM card out, tried restoring to previous system, but Itunes won't recognise the phone. It's absolutely doing my head in and I'm going out of town in the morning and really don't fancy being without my phone!

  • Brand new Mac Mini will not boot after 10.6.6 Update

    Problem is exactly as described here: http://forums.macresource.com/read.php?1,1069909,1070656
    The 1st restart was fine then it restarted for the 2nd time & it got to the gray screen with Apple logo & spinner. It sat there much longer than it ever had before then the Apple changed to a circle with a slash.
    I tried booting into single user mode and it is hanging "waiting for root device"

    Sounds like maybe your disk died.
    I suggest that you boot from the install DVD that came with your Mac and run AHT to check it out.
    Allan

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

    After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing. 
    I have tried a "hard reset" a number of times with no success. 
    When the battery is present the white LED flashes 3 times when the power button is pressed. 
    Please please help. 

    Hello Cuffy,
    Welcome to the HP Forums!
    I understand you notebook will not boot after a series of Windows updates.
    Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
    You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
    You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • Will not boot after updates

    I have a macbook air. It is running Lion. After updates it will not boot. It starts installing updates and just stops all together. Any help would be very welcome.

    Hey bfa67,
    Thanks for the question. To isolate the issue, what happens when you start up in Safe Mode?:
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    Thanks,
    Matt M.

  • Ipod touch 5th gen will not sync after windows 8.1 update

    ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Late 2011 17" MBP - Will not boot, eject, or read disk

    Hi guys,
    My late 2011 17" MBP after having a server error on Mac Recovery, freezing, and being force shut off, now will not boot.
    When you power it up, it chimes then goes to a blue screen, indefinitely.
    It also will not eject the DVD in it's drive.
    I've tried every key combination prior to startup or during startup to try and remedy this, and nothing.
    It always boots with a chime then blue screen.
    Please help. :3

    Ejecting the disk:
    Try these various remedies: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
    Since your Mac came with Lion installed it may have a recovery partition on the boot disk. 
    There are two ways boot from the Recovery Partition:
    - Hold down the Command-R as you boot.
              This will attempt to boot from the Recovery Partition
              and if that fails it will try to boot using Network Recovery (a slow process).
    - If it won’t boot using Command-R then hold down the Option key as you boot.
              Select the Recovery Partition.
    Backup:  Do you have a recent backup?  If not I suggest you create one before proceeding.  You might not need it but it is especially important to have a backup whenever your Mac is sick.  Post back for instructions for an emergency backup, if needed.
    Blue Screen:
    From the Recovery Partition you should be able to repair the disk and reïnstall OS X (without erasing you existing data).

  • Windows 8.1 will not boot after setting up dual-boot with Linux Mint 17.1 Cinnamon

    In which forum should I ask this question?
    After installing Linux Mint onto a partition of my hard drive, Windows 8.1 is listed a choice to boot into after restarting my computer, but will not boot up. It suggests a boot repair and to obtain Windows 8.1 from my distributor. I have seen on other forums
    that this has not worked, and I was wondering if anyone here had any suggestions for how to proceed.
    Thanks in advance.

    You can try them over here.
    http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • MBP will not boot up with USB devices connected

    I have a late 2010 MBP 15 10.7.2 that will no longer boot up if any USB devices are attached. A dongle, a hub, anything. It goes to the gray screen and stays there. Disconnecting all USB devices the MBP will boot up. Then connecting the USB devices they work. It just will not boot up with anything connected to the USB ports. I have reset PRAM, SMC and fixed disk permissions. Made sure login items are ok, and start up disk is correct. I cant really say when the problem started as it worked fine before, maybe on 10.7.1? Not sure.
    Any suggestions for a fix?

    I re-installed the 10.7.2 combo. It booted up with a non powered usb 4 port hub but it disabled it. Plugging it out then in again and it works. Looks like the USB firmware has changed somehow in 10.7.2, The hub works on PC's at work no problem, and it worked on the MBP without issue previously. Its not just the non powered hub its a powered hub, and other devices.
    Any solutions?

Maybe you are looking for