2012 R2 : Cluster SETUP : Generic Service SETUP :

Dear All,
I am facing a very strage issue while creating a cluster in Window Servr 2012 Standard R2. I am getting error (in attached file) which is
"The network name 'clustername.domain' is already used in the network".
but when i look into AD Server inside Computers, nothing is showing there with the same NAME or Object. SYSTEM is not accepting any name (you can type anythign as NAME or IP) simply not allowing to create cluster AND THAT SPECIFIC STEP IS FAILING. 
Same error i am getting when i tried to add GENERIC Service into cluster, I SETUP cluster using one of the same system accept it. This was the stop becuase after that i was not able to add anything after that point.
"The network name 'servicename.domain' is already used in the network"
again no name or ip is accepted by server
There is another issue i was having two SAN drive D (Data), or E (Quorom). Configuration validation was able to pass all test for harddisk, but only E(Quorom) drive was showing in storage. System was not allowing me to add any other storage disk.
Please note that have a AD on window server 2008 R2 with DNS, and DHCP services. Just to mentioned that i was able to validate the 'Cluster Configuration' without any error prior to create a cluster.
Cluster Issue
http://goldteam.co.uk/download/ClusterIssue.jpg
Thanks

Hi,
You can refer the following article to deploy the generic application resource cluster :
Creating and Configuring a Generic Application Resource
http://blogs.msdn.com/b/clustering/archive/2009/04/10/9542115.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • SQL Server 2012 Failover Cluster Setup

    I have to set up a Lab Test environment for SQL Server 2012 with failover clustering. What are the most cost effective specifications for H\W & S\W.  AFAIK Apart of Enterprise edition, Standard edition can support failover clustering for upto
    2 nodes with one node in passive mode. Somewhere (Here) I got that it is possible to configure SQL Server failover clustering On SQL
    Server 2012 Developer edition. Also Is it possible to use Windows 7 Platform with SQL Server 2012 Developer Edition for configuring Always on Failover Clustering. Although I have researched alot, but puzzled. Seeking for experts advise. Thanks in advance.
    Pranshul Gupta

    Yes you can configure and install in windows 7.. but make sure you have made all the proper updates as per the microsoft suggestion..
    Software  and hardware requirments for sql 2012
    http://msdn.microsoft.com/en-us/library/ms143506%28SQL.110%29.aspx
    http://www.yourdba.com/?p=123
    http://resources.arcgis.com/en/help/system-requirements/10.2/index.html#//015100000070000000
    Developer Edition..
    SQL Server 2012 Developer Edition will continue to be part of the SQL Server 2012 family. The Developer edition provides the same feature set as the Enterprise edition. However, it's licensed per developer and can't be used for production work.
    Clustering FAQ's
    http://www.brentozar.com/archive/2012/02/introduction-sql-server-clusters/
    SQL Server licensing :
    http://www.microsoft.com/sqlserver/en/us/future-editions/sql2012-licensing.aspx
    http://www.microsoft.com/sqlserver/en/us/get-sql-server/how-to-buy.aspx
    Overview  and support :
    http://msdn.microsoft.com/en-us/library/cc645993.aspx
    FCI Failover Cluster Instances (SQL Server)
    http://technet.microsoft.com/en-us/library/ms189134.aspx
    AlwaysOn Availability Groups (SQL Server) -- AG's
    http://technet.microsoft.com/en-us/library/hh510230.aspx
    Raju Rasagounder Sr MSSQL DBA

  • Reporting Services as a generic service in a failover cluster group?

    There is some confusion on whether or not Microsoft will support a Reporting Services deployment on a failover cluster using scale-out, and adding the Reporting Services service as a generic service in a cluster group to achieve active-passive high
    availability.
    A deployment like this is described by Lukasz Pawlowski (Program Manager on the Reporting Services team) in this blog article
    http://blogs.msdn.com/b/lukaszp/archive/2009/10/28/high-availability-frequently-asked-questions-about-failover-clustering-and-reporting-services.aspx. There it is stated that it can be done, and what needs to be considered when doing such a deployment.
    This article (http://technet.microsoft.com/en-us/library/bb630402.aspx) on the other hand states: "Failover clustering is supported only for the report server database; you
    cannot run the Report Server service as part of a failover cluster."
    This is somewhat confusing to me. Can I expect to receive support from Microsoft for a setup like this?
    Best Regards,
    Peter Wretmo

    Hi Peter,
    Thanks for your posting.
    As Lukasz said in the
    blog, failover clustering with SSRS is possible. However, during the failover there is some time during which users will receive errors when accessing SSRS since the network names will resolve to a computer where the SSRS service is in the process of starting.
    Besides, there are several considerations and manual steps involved on your part before configuring the failover clustering with SSRS service:
    Impact on other applications that share the SQL Server. One common idea is to put SSRS in the same cluster group as SQL Server.  If SQL Server is hosting multiple application databases, other than just the SSRS databases, a failure in SSRS may cause
    a significant failover impact to the entire environment.
    SSRS fails over independently of SQL Server.
    If SSRS is running, it is going to do work on behalf of the overall deployment so it will be Active. To make SSRS Passive is to stop the SSRS service on all passive cluster nodes.
    So, SSRS is designed to achieve High Availability through the Scale-Out deployment. Though a failover clustered SSRS deployment is achievable, it is not the best option for achieving High Availability with Reporting Services.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • SQL 2012 sp1 EE setup disappears when installing Setup Support files ( Error: sqm does not have active session)

    HI Folks,
    WIndows : 2008 R2
    SQL : 2012 sp1 EE
    Setup disappears when installing setup support files On passiive node ( 2  node cluster),  sql is runing on active node without any issue
    Error : SQM does not active session ( In summary detail txt file)
    blog is suggesting . Save the following in a .reg file and merge to populate the registry:  (
    here i am confusing how to save and where to save , how to merge and how to populate) 
    http://blogs.msdn.com/b/sqljourney/archive/2012/05/07/sql-2008-2008-r2-setup-disappears-fails-when-installing-setup-support-files.aspx
    Can you share  your views, if you need any information for clarification. pls let us know for resolution.
    Thanks in Advance.

    Sorry but there is already released  SP2 for SQL Server 2012. Start installation on the passive node first
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Sql 2012 always on setup

    I got a sql 2012 always on setup between 2 standalone servers in 2 different locations.
    I do not understand why I need cluster manager managing the 2 nodes.
    I have cluster manager but there is no shared disks. there are 2 nodes under cluster manager and one cluster name.
    what would be the different between the cluster name here and the availability group listener name in sql 2012? they are both different names

    Read those articles
    https://www.microsoftvirtualacademy.com/tracks/mission-critical-confidence-using-microsoft-sql-server-2012
    http://www.sqlservercentral.com/articles/FCI/92196/
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Cluster resource 'Analysis Services' of type 'Generic Service' in clustered role 'SQL Server' failed.

    Windows Server 2012 R2
    SQL Server 2012
    After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Failover Cluster Manager:
    Log Name:      System
    Source:        Microsoft-Windows-FailoverClustering
    Date:          4/10/2014 11:48:49 AM
    Event ID:      1042
    Task Category: Generic Service Resource
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      HQ-HASQL-1.sbgnet.int
    Description:
    Generic service 'Analysis Services (HASQL)' failed with error '1067'. Please examine the application event log.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
        <EventID>1042</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>16</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
        <EventRecordID>26212</EventRecordID>
        <Correlation />
        <Execution ProcessID="9036" ThreadID="14748" />
        <Channel>System</Channel>
        <Computer>HQ-HASQL-1.sbgnet.int</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="ResourceName">Analysis Services (HASQL)</Data>
        <Data Name="Status">1067</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Microsoft-Windows-FailoverClustering
    Date:          4/10/2014 11:48:49 AM
    Event ID:      1069
    Task Category: Resource Control Manager
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      HQ-HASQL-1.sbgnet.int
    Description:
    Cluster resource 'Analysis Services (HASQL)' of type 'Generic Service' in clustered role 'SQL Server (HASQL)' failed.
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
        <EventID>1069</EventID>
        <Version>1</Version>
        <Level>2</Level>
        <Task>3</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
        <EventRecordID>26213</EventRecordID>
        <Correlation />
        <Execution ProcessID="6464" ThreadID="9076" />
        <Channel>System</Channel>
        <Computer>HQ-HASQL-1.sbgnet.int</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="ResourceName">Analysis Services (HASQL)</Data>
        <Data Name="ResourceGroup">SQL Server (HASQL)</Data>
        <Data Name="ResTypeDll">Generic Service</Data>
      </EventData>
    </Event>
    With just these generic error messages being present, this has been difficult to diagnose. Some research has yielded possible resolutions of the Event Viewer log being full, .NET corruption, missing registry entries, but none of those seem to be the issue
    (Event Viewer logs cleared, Analysis services is working on the same physical servers in a different cluster, and the registry entries was only a supported issue for SQL Server 2008 and 2008 R2).
    Any help would be greatly appreciated.

    Bring up Configuration Manager, look at binary path for SSAS.  Make sure BOTH folders exist.  Sometimes with failovers mappings get screwed up.

  • Windows 2008 Failover Cluster - Cannot add a generic service

    Trying to add a generic service in a failover cluster.
    Select the option Services and Application and it opens the wizard and then displays the error "An error was encountered while loading the list of services. QueryServiceConfig failed. The system cannot find the file specified"
    The cluster validation wizard completes successfully. Permissions do not appear to be an issue as this account can seemly do everything else so I am at a loss to understand why this API is failing when it tries to query the server for services information.
    Having searched the Internet the only thing I have found was someone posting a similar issue in the Greek language Technet forum(if I recall correctly) and their comment was they rebuild their cluster.
    Windows 2008 (SP2) x64 two node cluster running a non-Microsoft database. We need to add a non-Microsoft Enterpirse backup solution and this is their documented method (adding it as a generic service) - both bits of software are from big vendors.
    Symantec AV, but have tried with that disabled so don't think it has anything to do with that. Something is stopping the API from reporting back but I can't find what.
    Really appreciate some help before we have to log a chargable call with Microsoft support
    Thank you

    Hi,
    Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is
    very useful for the further research. Please feel free to let me know if you have addition questions.
    Best regards,
    Vincent Hu

  • WWW service is not able to start via Microsoft Failover Cluster generic service resource

    Environment
    Cluster Nodes = two
    Cluster Nodes OS = Windows 2008R2
    Application = IIS
    Query
    I created generic service resources of many windows services under Microsoft Failover Cluster and they are failing over successfully but when I create a generic service resource for WWW, then the WWW service is not able to online
    via Microsoft Failover Cluster. It stuck in online pending.
    I have noticed two things.
    1.) If the WWW service is set to manual and started at passive node and I manually restart the Active node then the WWW service successfully switch over to stand by/passive node. but if the WWW service is set to
    manual and not started on stand by/Passive node then the WWW service is not failing over.
    2.) if I kill the WWW service manually (as a test case) on Active Node via this command (taskkill /f /pid XXXX) then the WWW service failed and is not failing
    over to standby/passive node.
    Any comment will be appreciated. Thanks. Zahid Haseeb.

    The problem is resolved. I feel that it will be helpful to other people who may face the same problem which I faced, so I wrote a blog on "How to configure IIS Web Site and Application Pool in Microsoft Failover Cluster" and mentioned almost all activities
    which I have done. Kindly see the resolution under section "Configure some changes in Cluster Configuration" in the below link
    http://zahidhaseeb.wordpress.com/2014/02/12/how-to-configure-iis-web-site-and-application-pool-in-microsoft-failover-cluster/
    Any comment will be appreciated. Thanks. Zahid Haseeb.

  • OSB cluster setup with SSL

    Hi,
    Could any one help me here..
    Cluster setup for OSB with SSL enable
    1) Admin and 2 Managed server are running on same host
    2) cluster domain created in development mode
    2) While starting second managed server getting below error..
    <Oct 4, 2010 8:04:58 AM PDT> <Error> <ClusterTimer> <BEA-000000> <Cannot contact Admin server. Therefore constructing the Cluster Authority Current time with
    the time skew 0
    java.rmi.RemoteException: ClusterTimerAuthority error; nested exception is:
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://hostname:SSLport: Destination unreachable; nest
    ed exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getClusterTimerAuthorityCurrentTime(RemoteClusterTimerAuthority.java:38)
    at com.bea.wli.timer.ClusterTimerService.clusterTimeAuthorityCurrentTimeMillis(ClusterTimerService.java:177)
    at com.bea.wli.timer.ClusterTimerService.initialize(ClusterTimerService.java:88)
    at com.bea.wli.sb.init.FrameworkStarter._preStart(FrameworkStarter.java:221)
    at com.bea.wli.sb.init.FrameworkStarter.access$000(FrameworkStarter.java:79)
    Truncated. see log file for complete stacktrace
    Thanks,
    Sushma.

    Even I faced the same issue..but eventually the problem got resolved with below resolution:
    Resolution: The managed server was not able to connect to t3s://hostname:sslport. The SSL configuration on Adminserver was wrong. After correcting SSL setting on Adminserver..i was able to resolve this error.

  • Verify HA Cluster setup in Oracle Virtual machine thru GUI

    Hi All,
    I have setup 3 node cluster with HA[Oracle VM] enabled.When i checked in the GUI it
    shows "High availability Infrastructure works well" like that.
    For testing HA, I poweroff one of the Oracle Virtual server node from the Oracle Virtual manager browser.
    Then if i checked the "Server Pools > Edit Server Pool ".check for "High Availability Infrastructure" browser keep going.
    Also one more thing is the Powered off machine automatically after some time it is coming up.Is
    it right ?
    After powered off if i run the below command in ovmmgr it shows 2 nodes are up.Same o/p
    how can i get in GUI when i clicked High Availability Infrastructure in "Server Pools > Edit Server Pool "
    [root@xxxovmsr1 ~]# /usr/lib/ovs/ovs-cluster-check master alter-fstab
    O2CB cluster ocfs2 already online
    2
    Cluster setup complete.
    Link hangs quit sometime.Not allowing new connections also ..What to do ?
    Basic question
    How to verify the cluster setup from the GUI when i click "High Availability Infrastructure" check button?
    Some one can help me in this please ?
    Regards,
    JK
    Edited by: user2861234 on Jun 29, 2009 8:11 AM

    Hey,
    After powered off one of VM server if i run the below command in ovmmgr it shows 2 nodes are up.
    Why are you going ovmmgr ?
    Are your checking it only thru gui part of the manager or also thru thr command line.
    Oracle vm server - are hosts for your virtual systems your create on them.
    If you power off the server - from GUI part you can see - it as switched off or unreachable
    If your HA feature is enabled for that pool having more than 1 server sharing the /OVS filesystem - then he virtual system which is runnign on 1 of the Oracle VM server - will not die
    It will migrate to other available server in the pool - which is whole idea and purpose of HA
    I don't understand what exactly you are trying to crosscheck or verify here with these commands
    High Availability Infrastructure in "Server Pools > Edit Server Pool "
    root@xxxoxxxr1 ~# /usr/lib/ovs/ovs-cluster-check master alter-fstab
    O2CB cluster ocfs2 already online
    2
    Cluster setup complete.
    If you have to check whether your HA feature is working - form GUI you can got o server pool - tab -
    edit it
    and chk the HA - tab
    and verify-
    it HA feature is working properly - it will give you message accordingly.

  • Why do we use reverse proxy for Oracle RAC Cluster setup

    Hello All,
                 I got this question lately.. "why do we use reverse proxy for Oracle RAC Cluster setup". I know we use the reverse proxy at Middleware level for multiple security reasons.
    Thanks..

    "why do we use reverse proxy for Oracle RAC Cluster setup".
    I wouldn't. I wouldn't use a proxy of any sort for the Cluster Interconnect for sure.
    Cheers,
    Brian

  • BAM Cluster setup - issue with whole server migration configuration

    HI,
    We are working on a SOA , BAM , BPM Cluster setup on OEL VMs
    With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2.
    We were successfully able to setup clustering for Soa without using the webTier utilities in our environment, Just by adding entries in the /etc/hosts file.
    Followed the document - except for web tier setup
    http://www.namredlek.nl/orasoa/InstallSOASuite11gOnCluster_v1.pdf
    1)     Installed Weblogic 11g.
    2)     Soa 11g.
    3)     Domain creation
    4) Configured Node manager
    5) Soa Clustering completed successfully.
    6) Domain up and running with SOA_Cluster up and running.
    7)     Extended the domain with BAM
    The issue revolves when we are doing teh Migration configurations from the console for BAM and we restart BAM server we get an error -
    Apr 14, 2011 2:30:35 AM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'bam_server1'
    java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
    and Bam server goes to Failed Not Restartable state.

    The error is clearly out there
    java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
    This error occurs due to a failure in adding the virtual IP of BAM server to the network interface you have specified in nodemanager.properties.
    You need to check whether you have specified the correct interface and subnet mask in node manager.properties as below :
    The fourth step is to edit the Node Manager's properties file. This file is called nodemanager.properties
    and is located in the ORACLE_BASE/product/osbmw/wlserver_10.3/common/nodemanager directory.
    For server migration to work properly, you need to add the properties listed below:
    Interface=eth0
    NetMask=255.255.255.0
    UseMACBroadcast=true
    · Interface
    This property specifies the interface name for the floating IP (for example, eth0).
    · NetMask
    This property specifies the net mask for the interface for the floating IP. The net mask should the
    same as the net mask on the interface; 255.255.255.0 is used as an example in this document.
    · UseMACBroadcast
    This property specifies whether or not to use a node's MAC address when sending ARP packets,
    that is, whether or not to use the -b flag in the arping command.

  • SOAP ports with cluster setup and BES?

    Okay, our cluster setup in NetWare (yes, still NetWare cluster) with Groupwise 7.0.3 we have unique TCP ports for the client/server (like 1677-something). Even though each clustered node has a unique IP and is running in protected memory.
    That being said:
    We'd like to enable SOAP for use with BES and GWArchive.
    The issue/question:
    Do either of these figure out the SOAP port for each PO? Or must the SOAP port be the same among all the PO's for BES to work properly?
    If the SOAP port must be the same (I'm not the BES admin, so I don't know if the setup lets you specify just one port or if you can defined them per PO), can you run multiple POA on the same physical host (keep in mind, this is clustered with protected memory) and use the same TCP port # for SOAP?

    kjhurni wrote:
    > Okay, our cluster setup in NetWare (yes, still NetWare cluster) with
    > Groupwise 7.0.3 we have unique TCP ports for the client/server (like
    > 1677-something). Even though each clustered node has a unique IP and is
    > running in protected memory.
    >
    > That being said:
    >
    > We'd like to enable SOAP for use with BES and GWArchive.
    >
    > The issue/question:
    >
    > Do either of these figure out the SOAP port for each PO? Or must the
    > SOAP port be the same among all the PO's for BES to work properly?
    >
    > If the SOAP port must be the same (I'm not the BES admin, so I don't
    > know if the setup lets you specify just one port or if you can defined
    > them per PO), can you run multiple POA on the same physical host (keep
    > in mind, this is clustered with protected memory) and use the same TCP
    > port # for SOAP?
    >
    >
    I haven't used BES, but in general there's no auto-discover method for
    SOAP ports, so yes they'd probably have to be the same port.

  • How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)

    How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
    active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
    now i have unistall sql instance from nodes,
    Your help will higly appriciated.
    Regards,
    Anish
    Asandeen

    Hello,
    Please refer to the following link about remove a node of  SQL Server Failover Cluster Instance:
    http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Display logfiles in cluster setup (HTTPS UI)

    Hi all
    In my standalone setup, I can display and download logfiles in HTTPS-Webgui under "Log Subscriptions" -> "Log Files".
    But in a cluster setup, I can't see the column "Log Files" under "Log Subscriptions". How can I access the files?
    Thanks!
    Christoph

    Hello Christoph,
    viewing individual logfiles on the GUI is notavailable for appliances in a cluster. You can still access them via your browser by using:
    ftp://appliancename.local
    as URL, where "appliancename.local" is the hostname or IP.  This will prompt you for an username and password, you can use your normal admin credentials. Also possible:
    ftp://[email protected]
    ftp://admin:[email protected]
    If you want to include username (and password)
    Hope that helps,
    Andreas

Maybe you are looking for