2012 R2 DC refuses to report into 2012 WSUS server
Hi All,Last week, I rolled out a brand new 2012 R2 WSUS box, and let all clients come over to it via GPO (easier route than migrating the existing WSUS setup, as we needed to keep the old WSUS server, due to it running other services too)... Now, all of our machines registered with the new WSUS box, and for the most part, reported their status correctly... However, I have one 2012 R2 DC here that just REFUSES to report into the new WSUS! Yet I have 9 or so other 2012 R2 boxes (that includes 3 more 2012 R2 DC's) that are reporting just fine!It initially registered with the new WSUS box last week, but remained at 0% and claimed it hadn't reported its status yet... I've tried removing it from the WSUS server, and now it won't register either!I've looked at the WindowsUpdate.log file, and it's pointing correctly to the new WSUS box, yet I...
This topic first appeared in the Spiceworks Community
That page is a link to the Datacenter version of Server 2012 R2 and the one I am attempting to install numerous times is the non data center version. Anyways I selected Datacenter ISO version, registered and then proceeded to the next page where I seen the
following error:
The webpage at http://care.dlservice.microsoft.com/dl/download/6/2/A/62A76ABB-9990-4EFC-A4FE-C7D698DAEB96/9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.I might
be temporarily down or it may have moved permanently to a new web address.
Can anyone who has successfully installed Server 2012 R2 (non DataCenter) version from ISO on to a temp system generate
a check sum of the ISO file?
I am going around in a circle here after attempting to install it on 2 systems as a standalone install and on two additional
systems in VirtualBox and VMWare Workstation on one system and VirtualBox on a second system all of which resulted in the all too familiar error.
Similar Messages
-
Steps to migrate 2005 SSRS reports into 2012 SSRS?
Hi All,
I will migrate bunch of datamarts from 2005 to 2012
SO Any idea where should I start looking and steps to take for SSRS reports?
thanks,
GokHello Gok,
Just open the BIDS 2005 SSRS Project in SSDT 2012 (SQL Server Data Tools) and the Project will be automatically migrated to the new Version; pretty simple.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801 -
Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"
After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks! -
Reporting Services 2012 - "Database is up to date, but some sites are not completely upgraded"
Running SharePoint 2010 SP1 (Feb-Mar 2012 CU)
Is there any official word from Microsoft regarding the issue with SQL Server Reporting Services 2012 for SharePoint where 2 of the reporting service application databases show "Database is up to date, but some sites are not completely upgraded".
ReportingServiceDB - Database is up to date, but some sites are not completely upgraded
ReportingServiceDB_Alerting - Database is up to date, but some sites are not completely upgraded
I'm building the new Reporting Services into a new DEV environment and I'd like to know what the official word is from Microsoft. Is Reporting Services 2012 ready for production?
Thanks!Hi mikea730,
Thanks for your psot.
Based on my research, I found a similar thread about this issue at Microsoft Contect site. For more information, please see:
http://connect.microsoft.com/SQLServer/feedback/details/721067/database-is-up-to-date-but-some-sites-are-not-completely-upgraded
It might be a known issue of SQL Server 2012. I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you
in a more efficient manner.
Regards,
Bin Long
Bin Long
TechNet Community Support -
Report Viewer 2012 Word Render Margin Problem
Hi all,
I am developing a asp.net web application /w visual studio 2012. I have created some reports with report viewer, and I would like to export those reports to pdf and MS Word format. The pdf output is same as I expected, but the word output is
missing top and bottom margin, it leads we cannot print the header and footer correctly in MS Word, also the repeat header on each page property didn't work too.
If I use report builder 3.0 and try to export the reports to pdf and MS Word format, the problem still exists.
Is anyone has the solution for this issue?
I think its related to sql server reporting services, please let me know if I posted at wrong category.
Thanks,
hkHi hkcheung,
According to your description, you have issues when exporting the report into Microsoft Word file. The margin of header and footer can't be displayed. And the RepeatOnNewPage property is not working. Right?
In Reporting Services, when we export the report into Word file, it will ignore page header and footer height settings. Also Word does not repeat header rows on page two and greater, although you set the
RepeatOnNewPage property of the static header row in a tablix (table, matrix, or list) to
True. For more information, please see the limitations in the link below:
Exporting to Microsoft Word (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Report Builder 2012 - Omit Certain Fields
I'm using SQL Server Report Builder 2012 to make a bar chart from a query I ran off. The table is great but the nature of it causes some problems in Report Builder without some tweaking which I've never used before (new to SQL in fact). Apologies for what
is a difficult question to put into words and in fact took me a while to grasp in my mind.
I've got a table with three date fields in it:
REC_NO OPEN IN_PROGRESS CLOSED
000111 01/01/2000 01/01/2000 01/01/2000
000112 01/01/2000
000113 01/01/2000 01/01/2000
If there's a value in OPEN in all three cases in the above then it will count that three records are open. However, one is CLOSED and one is IN_PROGRESS. In the case above, record 00111 is closed, 000112 is open and 000113 is in progress.
My question is, is there a way to filter the results of a query in Report Builder 2012 so that if a field is populated, not to use the previous in the chart? E.g. if IN_PROGRESS is populated but CLOSED isn't, don't use OPEN.
I know that was probably a very convoluted and difficult explanation but I don't know how else to explain it.
Thanks in advance
AdamHi Adam-M,
As per my understanding, there are four fields in the table, three fields’ data type is date. You want to add a field named status, when all the three fields have values, the status is closed, if only Open field has value, the status is open, else, the status
is in_progress. You want to create a bar chart using Report Builder 3.0, the data of status displays on x-axis and count of status displays on y-axis. If so, we can achieve your goal using reporting service. Please refer to the following steps:
1. In the left pane in Report Builder, verify that New Report is selected.
2. In the right pane, click Chart Wizard.
3. On the Choose a dataset page, click Create a dataset, and then select an existing data source or browse to the report server and select a data source, then paste your query into the query pane.
4. On the Choose a chart type page, the column chart is the default chart type. Click Bar, and then click Next.
5. Right click the dataset used to retrieve data and click Add Calculated field, type Status in the field name text box, click the expression (Fx) button, then type the following expression:
=IIf(IsNothing(Fields!CLOSED.Value)=0 and IsNothing(Fields!IN_PROGRESS.Value)=0,"CLOSED",IIF((Fields!CLOSED.Value)IS NOTHING AND ISNOTHING(Fields!IN_PROGRESS.Value)=0,"IN_PROGRESS","OPEN"))
6. Drag Status to the Categories pane.
7. Drag Status to the Values pane. The Values pane displays [Sum(Status)] because the chart displays the aggregate for each status, click the arrow right to the aggregation, click Expression and type the expression:
=Count(Fields!Status.Value)
8. Click Run to preview the report.
For more information about Add a Bar Chart to Your Report (Report Builder), please refer to the following document:
http://msdn.microsoft.com/en-us/library/dd255225(v=sql.110).aspx
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu -
Reporting Services 2012 in SharePoint 2010 - do I need to install SSRS on each server?
Have spent some time today setting up SSRS2012 with SP1 Business Intelligence Edition on our test SharePoint 2010 farm. The SharePoint farm is four servers (plus a database) - one of the application servers will host the SQL Server 2012 instance and
SSRS 2012.
I've installed SSRS 2012 on one of the servers in SharePoint mode, and seems to be configured correctly in Central Admin - can view the system settings, it reports that the SQL Server Agent is running, etc. I've also installed the SSRS 2012 SharePoint
Add-In on all servers. However, I'm getting the following error whenever I try to do anything with reports (such as deploying or running):
Name=Request (POST:http://sharepoint/reports/ReportService2010.asmx) System.Runtime.InteropServices.COMException: The file you are attempting to save or retrieve has been blocked from this Web site by
the server administrators.
Sure enough, if I try to connect to that ReportService2010.asmx URL in a browser, I get the same error. Note that http://sharepoint is NOT the server I installed SSRS on - this is a web front-end.
Can I assume that I need to install SSRS2012 (SharePoint integrated) on all SharePoint servers in the farm? Or is this another issue?You only need to install the Add-on for the additional servers. Have you configured the SSRS Service Application?
http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Dimitri Ayrapetov (MCSE: SharePoint) -
Reporting Services 2012 in SharePoint 2010 - SQL database edition?
We currently have a SharePoint 2010 farm, running on a SQL Server 2008 R2 Standard database. On one of the SharePoint 2010 servers, we have an instance of Reporting Services 2008 Enterprise running in SharePoint integrated mode. (We require Enterprise
for data-driven subscriptions)
We'd like to upgrade to Reporting Services 2012 for Data Alerts and a few other new features. However, I noticed something on
this blog stating that the SharePoint 2010 database server edition needs to match the Reporting Services edition. My concern is that I've not seen any official mention of this in Microsoft's documentation, and would like to avoid upgrading to Enterprise
for the SharePoint 2010 database if I can avoid it.
So, what I'd like to run is:
SharePoint 2010
SharePoint database: SQL Server 2008 R2 Standard
Reporting Services 2012 Enterprise
Reporting Services database: same as SharePoint database, so SQL Server 2008 R2 Standard
Is this possible? Or do I need to upgrade the SharePoint database to SQL Server 2008 R2 Enterprise?
Alternatively, could I install a separate database engine just for Reporting Services to host its databases (for example, SQL Server 2012 Enterprise), so I don't have to mess around with upgrading the SP database?While you don't need to upgrade your SQL 2008 R2 to 2012, you will need to install an instance of SQL 2012 & SSRS 2012. They can be side-by-side and independent of each other. The following blog post provides steps to do so,
http://www.madronasg.com/blog/how-configure-sql-server-reporting-services-2012-use-sharepoint-2010#.UuEVd2Ao74Y
Dimitri Ayrapetov (MCSE: SharePoint) -
Unable to install Report Viewer 2012
As part of the SCOM console install I need to install Report Viewer 2012. To install Report Viewer 2012 I need to have Microsoft System CLR Types for SQL Server 2012.
I have installed all versions of CLR Types for SQL Server 2012 that I can find. But I still am not able to install Report Viewer 2012. It errors out when checking for CLR Types for SQL Server 2012.
I have tried every variation of report viewer (2008,2010,20120) and CLR Types for SQL Server (32bit/64bit). I am just not able to install report viewer so I can install the SCOM console.Go to the link below
http://www.microsoft.com/en-us/download/details.aspx?id=35580
and then select SQLSysClrTypes. You don't need all the files.
Did this multiple times with the same result. After installing the ClrTypes the Report Viewer still indicates that it is failing that requirement. -
We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
Server. BITS and windows updates services are running.
Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Performed the above steps. Please see the updates logs from a client.
2015-03-16 12:48:44:617
1040 15a4
Shutdwn user declined update at shutdown
2015-03-16 12:48:44:617
1040 15a4
AU Successfully wrote event for AU health state:0
2015-03-16 12:48:44:618
1040 15a4
AU AU initiates service shutdown
2015-03-16 12:48:44:649
1040 15a4
AU ########### AU: Uninitializing Automatic Updates ###########
2015-03-16 12:48:46:506
1040 15a4
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:48:46:584
1040 15a4
Service *********
2015-03-16 12:48:46:584
1040 15a4
Service ** END ** Service: Service exit [Exit code = 0x240001]
2015-03-16 12:48:46:584
1040 15a4
Service *************
2015-03-16 12:54:23:139
1024 1060
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2015-03-16 12:54:23:214
1024 1060
Misc = Process: C:\Windows\system32\svchost.exe
2015-03-16 12:54:23:264
1024 1060
Misc = Module: c:\windows\system32\wuaueng.dll
2015-03-16 12:54:23:139
1024 1060
Service *************
2015-03-16 12:54:23:264
1024 1060
Service ** START ** Service: Service startup
2015-03-16 12:54:23:265
1024 1060
Service *********
2015-03-16 12:54:24:262
1024 1060
Agent * WU client version 7.6.7600.320
2015-03-16 12:54:24:263
1024 1060
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-03-16 12:54:24:272
1024 1060
Agent * Access type: No proxy
2015-03-16 12:54:24:532
1024 1060
Agent * Network state: Connected
2015-03-16 12:55:17:235
1024 1060
Report CWERReporter::Init succeeded
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-03-16 12:55:17:235
1024 1060
Agent * Prerequisite roots succeeded.
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing global settings cache ***********
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS status server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * Target group: Eastwood
2015-03-16 12:55:17:235
1024 1060
Agent * Windows Update access disabled: No
2015-03-16 12:55:17:247
1024 1060
DnldMgr Download manager restoring 0 downloads
2015-03-16 12:55:17:248
1024 1060
AU ########### AU: Initializing Automatic Updates ###########
2015-03-16 12:55:17:249
1024 1060
AU # WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:249
1024 1060
AU # Detection frequency: 22
2015-03-16 12:55:17:249
1024 1060
AU # Target group: Eastwood
2015-03-16 12:55:17:249
1024 1060
AU # Approval type: Scheduled (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Scheduled install day/time: Every day at 3:00
2015-03-16 12:55:17:249
1024 1060
AU # Auto-install minor updates: Yes (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-03-16 12:55:17:249
1024 1060
AU # Will display featured software notifications (User preference)
2015-03-16 12:55:17:259
1024 1060
Agent Switching to hardware-verified ClientId.
2015-03-16 12:55:17:260
1024 1060
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 12:55:17:402
1024 1060
Report *********** Report: Initializing static reporting data ***********
2015-03-16 12:55:17:402
1024 1060
Report * OS Version = 6.1.7601.1.0.65792
2015-03-16 12:55:17:402
1024 1060
Report * OS Product Type = 0x00000030
2015-03-16 12:55:17:600
1024 1060
Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
2015-03-16 12:55:17:601
1024 1060
Report * Locale ID = 1033
2015-03-16 12:55:17:654
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:655
1024 1060
AU Initializing featured updates
2015-03-16 12:55:17:655
1024 1060
AU Found 0 cached featured updates
2015-03-16 12:55:17:655
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU AU finished delayed initialization
2015-03-16 12:55:23:261
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:55:41:121
1024 1074
AU Triggering AU detection through DetectNow API
2015-03-16 12:55:41:122
1024 1074
AU Triggering Online detection (non-interactive)
2015-03-16 12:55:41:193
1024 1060
AU #############
2015-03-16 12:55:41:193
1024 1060
AU ## START ## AU: Search for updates
2015-03-16 12:55:41:193
1024 1060
AU #########
2015-03-16 12:55:41:218
1024 1060
AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 12:55:41:218
1024 1194
Agent *************
2015-03-16 12:55:41:218
1024 1194
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 12:55:41:218
1024 1194
Agent *********
2015-03-16 12:55:41:218
1024 1194
Agent * Online = Yes; Ignore download priority = No
2015-03-16 12:55:41:218
1024 1194
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-16 12:55:41:218
1024 1194
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-16 12:55:41:218
1024 1194
Agent * Search Scope = {Machine}
2015-03-16 12:55:41:218
1024 1194
Setup Checking for agent SelfUpdate
2015-03-16 12:55:41:219
1024 1194
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-16 12:55:45:440
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:45:893
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:45:897
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
2015-03-16 12:55:45:979
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:014
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:019
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:050
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:055
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:093
1024 1194
Setup Determining whether a new setup handler needs to be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup SelfUpdate handler is not found. It will be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:52:237
1024 1194
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:52:237
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:53:377
1024 1194
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:53:502
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:56:705
1024 1194
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:56:896
1024 1194
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-16 12:56:01:618
1024 1060
AU AU received policy change subscription event
2015-03-16 13:00:00:824
1024 1194
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-16 13:00:00:824
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:00:01:001
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:00:01:001
1024 1194
PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
2015-03-16 13:00:01:001
1024 1194
PT Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-16 13:00:01:833
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
2015-03-16 13:00:02:004
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
2015-03-16 13:00:08:676
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
2015-03-16 13:07:37:795
1024 1194
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-03-16 13:07:37:795
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:07:37:988
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SOAP Fault: 0x000190
2015-03-16 13:07:41:893
1024 1194
PT WARNING: faultstring:Fault occurred
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ErrorCode:InternalServerError(5)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Message:(null)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ID:4cd69d60-d69b-4591-88ad-5687cdda3265
2015-03-16 13:07:41:893
1024 1194
PT WARNING: PTError: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Sync of Extended Info: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
2015-03-16 13:07:41:914
1024 1194
Agent * WARNING: Exit code = 0x8024400E
2015-03-16 13:07:41:914
1024 1194
Agent *********
2015-03-16 13:07:41:914
1024 1194
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 13:07:41:914
1024 1194
Agent *************
2015-03-16 13:07:41:914
1024 1194
Agent WARNING: WU client failed Searching for update with error 0x8024400e
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:42:021
1024 14f4
AU >>## RESUMED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Search callback failed, result = 0x8024400E
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Failed to find updates with error code 8024400E
2015-03-16 13:07:42:021
1024 14f4
AU #########
2015-03-16 13:07:42:021
1024 14f4
AU ## END ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU #############
2015-03-16 13:07:42:021
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:021
1024 14f4
AU AU setting next detection timeout to 2015-03-16 22:07:42
2015-03-16 13:07:42:022
1024 14f4
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:46:919
1024 1194
Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
2015-03-16 13:07:41:913-0400 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400e
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-03-16 13:07:47:022
1024 1194
Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:14:23:923
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:14:23:923
1024 1194
Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmxDon thank you for the reply.
But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
please see the below logs from the same PC after pointing to our wsus running on win2003.
2015-03-17 14:41:08:507
1020 f1c
Inv # Talking to WSUS server = http://atl-wsus-1:8530
2015-03-17 14:41:08:508
1020 f1c
Inv # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
2015-03-17 14:41:08:508
1020 53c
AU #########
2015-03-17 14:41:08:508
1020 53c
AU ## END ## AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
2015-03-17 14:41:08:508
1020 53c
AU #############
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Featured notifications is disabled.
2015-03-17 14:41:08:510
1020 53c
AU AU setting next detection timeout to 2015-03-18 16:13:54
2015-03-17 14:41:08:510
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approved 5 update(s) for download (NOT for Ux)
2015-03-17 14:41:08:510
1020 53c
AU #############
2015-03-17 14:41:08:511
1020 53c
AU ## START ## AU: Download updates
2015-03-17 14:41:08:511
1020 53c
AU #########
2015-03-17 14:41:08:511
1020 53c
AU # Approved updates = 5
2015-03-17 14:41:08:512
1020 53c
AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:08:513
1020 53c
AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:08:514
1020 53c
AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:08:515
1020 53c
AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
2015-03-17 14:41:08:516
1020 53c
AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
2015-03-17 14:41:08:516
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:516
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:516
1020 53c
AU AU setting pending client directive to 'Download Progress'
2015-03-17 14:41:08:518
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:518
1020 53c
AU # Pending download calls = 5
2015-03-17 14:41:08:518
1020 53c
AU <<## SUBMITTED ## AU: Download updates
2015-03-17 14:41:08:520
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:964
1020 f1c
Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
2015-03-17 14:41:08:976
1020 f1c
Misc Microsoft signed: NA
2015-03-17 14:41:08:993
1020 f1c
Inv # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
2015-03-17 14:41:09:022
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:086
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:118
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:150
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:182
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:214
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:246
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:278
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:310
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:342
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:374
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:406
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:438
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:471
1020 f1c
PT WARNING: PTError: 0x80041002
2015-03-17 14:41:10:590
1020 f1c
Inv #########
2015-03-17 14:41:10:590
1020 f1c
Inv ## END ## Inv: Inventory Collection
2015-03-17 14:41:10:590
1020 f1c
Inv #############
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *************
2015-03-17 14:41:10:592
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *********
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:10:592
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3029944)
2015-03-17 14:41:10:592
1020 f1c
Agent * UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
2015-03-17 14:41:10:592
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:10:592
1020 f1c
Agent * {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:10:598
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:10:599
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:10:599
1020 f1c
DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:13:863
1020 f1c
Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
2015-03-17 14:41:13:863
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:13:863
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:13:863
1020 f1c
Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
2015-03-17 14:41:13:864
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:13:864
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:16:436
1020 f1c
DnldMgr * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
2015-03-17 14:41:16:473
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
(full file).
2015-03-17 14:41:16:644
1020 f1c
Agent *********
2015-03-17 14:41:16:644
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:644
1020 f1c
Agent *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:16:645
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3004361)
2015-03-17 14:41:16:645
1020 f1c
Agent * UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
2015-03-17 14:41:16:645
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:16:645
1020 f1c
Agent * {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:648
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:649
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:16:649
1020 f1c
DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:678
1020 f1c
Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
2015-03-17 14:41:16:678
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:678
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:678
1020 f1c
Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:687
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:687
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:732
1020 f1c
DnldMgr * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
2015-03-17 14:41:16:758
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
(full file).
2015-03-17 14:41:16:809
1020 f1c
Agent *********
2015-03-17 14:41:16:809
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:809
1020 f1c
Agent *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr * Updates to download = 1
2015-03-17 14:41:16:811
1020 f1c
Agent * Title = Security Update for Windows 7 (KB3031432)
2015-03-17 14:41:16:811
1020 f1c
Agent * UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
2015-03-17 14:41:16:811
1020 f1c
Agent * Bundles 1 updates:
2015-03-17 14:41:16:811
1020 f1c
Agent * {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:814
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:815
1020 f1c
DnldMgr * Queueing update for download handler request generation.
2015-03-17 14:41:16:815
1020 f1c
DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:843
1020 f1c
Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
2015-03-17 14:41:16:843
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:843
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:843
1020 f1c
Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:844
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:845
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:881
1020 f1c
DnldMgr * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
2015-03-17 14:41:16:906
1020 f1c
DnldMgr * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
(full file). -
Will Report Builder 2012 Work with SQL Server 2008???
Simple question really
Will Report Builder 2012 work in conjunction with SQL Server 2008???
Is it worth while upgrading?
The main reason i ask is the ability to export in an xlsx format
ThanksHi Gmach,
The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
to SQL Server 2008 Server using Report Builder that on SSRS 2012.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support -
Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
MudassarI have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar -
SQL Reporting Services 2012 ,Exception
Guys
We are facing an issue on report server 2012 and message is as follows
message from the server cannot be parsed
Common case for this exception are when the response is modified by calls to response.write(),response filters , http modules
I will attach an image once the thread is verified
Please assist us in case if any one faced this issue before
Regards
DataGeek_84Hi DataGeek_84,
Based on my research, the error” Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters,
HttpModules…” always occurred when you have used the Microsoft ASP.NET AJAX UpdatePanel control.
From the error message, we can easily find the common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. To avoid those given errors, please see:
Calls to Response.Write():
Place an <asp:Label> or similar control on your page and set its Text property. The added benefit is that your pages will be valid HTML. When using Response.Write() you typically end up with pages that contain invalid markup.
Response filters:
The fix might just be to not use the filter. They're not used very often anyway. If possible, filter things at the control level and not at the response level.
HttpModules:
Same as response filters.
Server trace is enabled:
Use some other form of tracing, such as writing to a log file, the Windows event log, or a custom mechanism.
For more information about how to avoid Sys.WebForms.PageRequestManagerParserErrorException, we can refer to the following excellent blog entry by Eilon Lipton.
http://weblogs.asp.net/leftslipper/archive/2007/02/26/sys-webforms-pagerequestmanagerparsererrorexception-what-it-is-and-how-to-avoid-it.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Reporting Services 2012 mobile support
Hi,
Does anyone have info on mobile support for Reporting Services 2012. We've found
http://blogs.msdn.com/b/sqlrsteamblog/archive/2011/10/13/power-view-pass-and-mobile.aspx
which is a year old. It states the direction/strategy for "web based BI solutions" including SSRS for mobile devices (Android, iOS etc). Timeframe is set to 2nd half 2012. SQL Server 2012 SP1 is in CTP4 now and we can't find any info about better support
for mobile browsers and devices.
Has anyone found anything else or can share some experience? Our alternative is Telerik reporting which would be a new component for us which would add overhead to our project since the users and report writers know SSRS today.
Thanks!Hi Mansos,
So far, my information abou the Mobile BI is gained from the Microsoft BI Team's MSDN
blog. There is a blog about Mobile BI posted on 3 April, 2012, you can refer to the following link:
Gartner BI Summit Day One Recap
If you need further information about the Mobile BI, I suggest that you contact the production group. Please see the "Contact US" section of the following site:
http://www.microsoft.com/en-us/bi/solutions.aspx
Regards,
Mike Yin
Mike Yin
TechNet Community Support
Maybe you are looking for
-
Cant do a file get from external server using file sender adapter with ftp
Hi all, Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process I have a requirement to do an ftp file get from an external server
-
CE Tool for change themes in WD application
Hi everyone, i´m searching for docs that help me with the customization of the look & feel for web dynpro app running with CE, the only docs i could find is applicable to NW 7.0, any help will be appreciated. Thanks.
-
Changing the Burning Speed in iTunes
Has the option for changing the burning speed been taken away in the most recent version of iTunes. I thought this used to be an option under iTunes/Preferences, but I can't seem to find it. Any information about this would be appreciated.
-
Hi Gurus, I have a question regarding partitioning the cube. When you partition the cube from the Extras menu, will it partition the F table or is it the E table or both. Second question: After partitioning, how will i know the newly created table na
-
Hi all, I have both iWork '06 and MS Office for Mac, because I like iWork but need to use Office for some othge functionality. When I have something written up in Pages and then export it to Word format (.doc) for more compatibility, and try to open