2012 R2 Fax Server -- "The Message could not be sent. The wait operation timed out."

I receive the following error on a newly installed 2012 R2 fax server when sending from the Windows Fax and Scan console:
"The Message could not be sent. The wait operation timed out."
The test fax that fails only contains text that I type into the body. However, if I add an attachment, the fax is successful.
Any ideas??

Hi,
Would you please let me confirm whether install any third-party application on the Windows Server 2012 R2?
Please perform a clean boot to eliminate software conflicts and monitor the result. Please also check if you install all necessary updates on the server.
Meanwhile, please run
sfc /scannow command to scan all protected system files and check if find issues.
Please also refer to following article and check if can help you.
Troubleshooting Your Fax Server
By the way, there is a similar thread. Please also refer to following thread and check if can help you.
Windows
Fax and scan (Windows 8)
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Cannot send messages since updating to Thunderbird V 31.3.0. The message could not be sent using SMTP server for an unknown reason. Help?!?

Mail provider - Network Solutions
ISP - Comcast
Anti-Virus - Kaspersky Internet Security 2013
OS - Windows 7 Home Premium, Service Pack 1
Outgoing Server SMTP settings attached.
I can receive messages and can send them directly from Network Solutions just unable to send now from Thunderbird. Was working fine until the newest version installed. Haven't changed any settings...

That anti virus? is it Nortons security suite? I think that is what comcast give their xfinity customers but I am not sure what everyone else gets.
Assuming is is the Norton's product go into the firewall component and explicitly allow Thunderbird unrestricted access to the internet. Norton's product have a long history of blocking new releases of mail programs because the version number changed.
Go onto the SMTP setting you have in the image and make sure each has a description entered.
Now check in the account settings by clicking the account name in the list so you select the item about Server settings for each account and make sure the selected SMTP server is what you think it is. Now there is a description that will show in the list.

Using Outlook 2011 on new Macbook, I am getting error code 50 The message could not be sent because it has unresolved recipients." Can anyone suggest how to resolve this? Thank you!

I have used Outlook since it came out and am using it on new Macbook Air. Today, I started getting this message.
thank you!
Gary

It sounds to me like some of the addressees in an email message you're tryijng to send are not legitimate. Perhaps you're trying to use Apple's Contacts address book instead of Outlook's. Check each outgoing address in the message.

I get the message Could not load " .ai" The file might be an unsupported format or may be corrupt.

I am trying to open the Ai. file in my graphtec ce6000 program and I receive this message. Worked fine before and now I keep getting this message. I can cut directly from my cutter program. So I know it has to do with an error in Ai. Please help! I have an install today and because of the holiday I cant reach technical support.

I think you need to ask in the forum used to create the AI file
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not

Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
Ranga

Hi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".
Any ideas? I probably have something wrong in my computer settings.

You should restore your modem to router condition and set the Airport Express to 'Bridge Mode'. A full explanation and the method of doing this is here:
http://www.wilmut.webspace.virginmedia.com/notes/airport.html

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Dowloaded OS 6 to iPhone 4s. Get message when deleting email: "The message could not be moved to the mailbox Trash." Any solution?

Dowloaded OS 6 to iPhone 4s. Get message when deleting email: "The message could not be moved to the mailbox Trash." Any solution?

Update - I deleted/re-added my account. Same issue. Also, no my Exchange calendar won't sync. Issue appears to be on the Exchange server. I see the following errors in my iPhone log:
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x189010
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284a and title Calendar has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:14 unknown CommCenter[32] <Notice>: com.apple.persistentconnection[dataaccessd,1690] is releasing its assertion on PDP context 0.
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x183be0
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284b and title Contacts has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:23 unknown CommCenter[32] <Notice>: Client [com.apple.persistentconnection[dataaccessd,1690]] is telling PDP context 0 to go active.
Thoughts?

HT1668 I get the "Unable to Move Message. The message could not be moved to the mailbox Trash". whenever i try deleting from my ipad 2. I am unable to delete from Trash...HELP

I get the "Unable to Move Message. The message could not be moved to the mailbox Trash". whenever i try deleting from my ipad 2. I am unable to delete from Trash...HELP!
Additional info...I am trying to delete these emails from a Webmail address. the Trash currently has 11 messages and they arent being deleted.

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app via the taskbar : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Another option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If you still can't delete them then go into Settings > Mail, Contacts, Calendars, select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails.

Why the following error message "The message could not be moved to the mailbox Trash".

Why do I see the following error message?
"Unable to Move Message. The message could not be moved to the mailbox Trash".

Try closing the Mail app via the multitasking bar and see if you can delete them when you re-open the app : double-click the home button to open the taskbar and then swipe or drag the Mail app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
If that doesn't fix it then try going into Settings > Mail, Contacts, Calendars. Then select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails.

"The message could not be moved to the mailbox Archive" - iPhone 6

I have an iPhone 6 using the standard email app for my work (we use gmail apps), now using the latest iOS 8.1
When I try to swipe to Archive, it doesn't work and says: "Unable to Move Message. The message could not be moved to the mailbox Archive"
If I switch to 'Delete' instead of 'Archive' it deletes it, but I want to archive. It used to work, yet even before I upgraded my phone and iOS, it's started happening a month or so ago.
I used to never have this issue but it's relatively new. I've tried deleting and reinstalling my mail account and nothing works.
Help please.
Thanks

Update - I deleted/re-added my account. Same issue. Also, no my Exchange calendar won't sync. Issue appears to be on the Exchange server. I see the following errors in my iPhone log:
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x189010
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284a and title Calendar has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:14 unknown CommCenter[32] <Notice>: com.apple.persistentconnection[dataaccessd,1690] is releasing its assertion on PDP context 0.
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x183be0
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284b and title Contacts has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:23 unknown CommCenter[32] <Notice>: Client [com.apple.persistentconnection[dataaccessd,1690]] is telling PDP context 0 to go active.
Thoughts?

'The message could not be moved to the mailbox Trash' message when deleting

Hello,
I have a 3G and after upgrading to iOS4, whenever I delete messages from an Exchange mailbox on my iPhone, I get the message 'Unable to Move Message - The message could not be moved to the mailbox Trash'. Odd part is that the message IS moved to Trash. I also have a gmail account setup and that one works just fine. Really more of an annoyance than an issue, but it's growing more annoying by the minute. Any ideas?
Thanks

Update - I deleted/re-added my account. Same issue. Also, no my Exchange calendar won't sync. Issue appears to be on the Exchange server. I see the following errors in my iPhone log:
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x189010
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284a and title Calendar has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:14 unknown CommCenter[32] <Notice>: com.apple.persistentconnection[dataaccessd,1690] is releasing its assertion on PDP context 0.
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x183be0
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284b and title Contacts has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:23 unknown CommCenter[32] <Notice>: Client [com.apple.persistentconnection[dataaccessd,1690]] is telling PDP context 0 to go active.
Thoughts?

Error Message "The document could not be saved. A number is out of range"

Hello to all,
I'm working on a G5/10.4.11/Illust CS3/Acrobat 9 and use to generate .pdfs from .ais by using "Save as pdf" function. Either with LowRes profile and HighRes profile. My pdfs are sent to PC users that use to post it them for changes. But when they need to save them, they get the message "The document could not be saved. A number is out of range".
I know there was a few subject about that but do you have a recent solution to give me to help avoiding this bug ?
Many thanks in advance !
Stekc

As a follow to the above, the problem was related to a file transfer. The PDFs in question were being transfered from a Unix platform to a Windows Server. The transfer was defaulting to ASCII or Text and not binary. Apparently this was never an issue with older versions of Adobe Reader. Once the transfer was switched to binary, Reader X was able to view the files with no missing pages. Something was being stripped from the file that Reader X just didn't like.

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

2012 R2 Fax Server -- "The Message could not be sent. The wait operation timed out."

Similar Messages

Maybe you are looking for