2012 R2 - First cluster, having issues creating Quorum witness disk

Its my first Server 2012 R2 Cluster and its based on a Dell VRTX server with shared storage.
I've created the cluster and I'm now trying to setup the Quorum witness disk.
In FCM Storage/Disks a 600mb disk is shown as online and I've called it Quorum.
In Win Disk Manager this disk shows as offline and reserved.
When I run the 'Configure Cluster Quorum Settings' wizard, pick 'Select the quorum witness', pick ' configure a disk witness' I get the error
No suitable disks exist in Available storage.
What am I missing?
Any help/advice/suggestions grateful appreciated :)

ok, figured it out:-
On Cluster 1 selected the Disk and put it in maintenance in Storage/Pools.
On Server 2 - selected Disk 1 and formatted it as NTFS and called it Quorum.
Then took the Disk 1 offline in Disk Management.
In Cluster 1 brought the Disk back on-line.
Ran the Quorum wizard and it works :)

Similar Messages

Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...

Downloaded fine but no matter what version I try downloading I seem to get message setup.xml could not be loaded. File corrupt? Help please am no techie and been on it all morning using vista home basic service pack 2 if it helps? Thanks.

Will give the link a go, thankyou...
Date: Fri, 9 Nov 2012 12:15:06 -0700
From: [email protected]
To: [email protected]
Subject: Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...
    Re: Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...
    created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
It is possible the download was corrupted. You can try following the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download of the software.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4835721#4835721
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4835721#4835721
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4835721#4835721. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Having issues Creating a PDF from an Excel file

When creating PDFs from an Excel file using the Adobe PDF printer, I sometimes run into an issue where the PDF ends up shrinking what's on the document and distorting the image. I have examined all Print Settings and can't find a difference between any of the margin settings, paper size, etc. Once I go to print to Adobe PDF, it just changes the way the whole document looks and is spaced.
To work around the issue, I use Microsoft's built in Save As PDF feature, but that's only works some of the time. I would like to use the Acrobat software so that I can also edit the document immediately without having to re-open it.

Be sure Adobe PDF is selected as the printer in the print menu. Then do a print preview. It it looks wrong then, it is likely an Excel format issue.

Having issues created a .pdf from a Word .doc.

I tried converting a Word doc today, and was given the error "Missing PDF file maker. Do you want to run this in repair mode? I click yes, it scans (for several minutes) then no document. A document icon appears on the opening page, yet when you click on it, it says: ERROR – this document cannot be found."
I tried two other documents I scanned into PDF files – both from excel sheets – no problem. Since this was installed I haven't had any issues until recently. I cannot think of anything that has changed since then.
Is it possible this is a problem with Word?

Well I'm having the same issue. Right now I have a very simple, one page Word doc I want to PDF before emailing. I hit print, chose PDF, picked where I wanted to save file, then . . . Adobe starts to open Word - but only the "title page" comes up and hangs for . . . ever. Adobe says "Please wait, reading PDF file . . . ".
When I open Task Manager - it shows both Word and Adobe PDF as running.
I checked for updates. I can't think of what to do next?
I can chose Adobe PDF in my print menu, I have new laptop running Windows 7 and Microsoft Home Premiere 2010.
Any help would be greatly appreciated. I'm doing a 'favor' for my mother's friend, now both of them are calling wondering what is taking me so long : }

HT1349 I can no update my itunes for some reason for the first time having issues nothing happens

I've never had an issue before with updating itunes, but this time, there is an update available and it will not update it. Nothing happens. Everything else in iTunes appears normal as far as apps are there, songs, tones etc... that I've recently purchased. I want to update iTunes then sync my phone. Well, I went ahead and tried to sync my phone without updating iTunes and when I connected my phone I get this message.
"iTunes could not connect to this iPhone because an unlnown error occured (OxE80000001)"
I'm clueless as to what is going on. I've rebooted my computer and that is all.

see your error code here http://support.apple.com/kb/TS3221 follow instructions to resolve.

Anyone else having issues with cpu and disk io?

I have an hp pavilion 500-424. it has a 2.0 ghz quadcore amd and 12 gb of memory. it came installed with windows 8.1 *(which i game on). so what i did was pull out the hard-drive and formatted and older drive to put in and install windows 10 on....i wanted
it to be the best experience i could possibly have. what i found was that windows 10 was using anywhere from 50% to 70% of my cpu and my disk was pretty much always st 100%. so it was slow and hung up allot. the drive i put win10 on was a seagate st3120213as.
i looked up the specs thinking maybe the data transfer rate wasn't fast enough but its supposed to have a transfer rate of 300MBps. it became so annoying that i pulled the drive and put my original back in until i can come up with some sort of
solution. i am open to any suggestion anyone might have on correcting this issue.

I ran into a similar problem. I took the upgrade path from WIN 7 to WIN 10.
Before going down the upgrade path I cloned a separate drive to preserve my original WIN 7 installation.
After upgrading to WIN 10 The system would eventually lock up and require a hard shutdown and reboot. I investigated via Task Manager and observed where the DISK I/O would max out at 100% and shortly thereafter the system would lock up. I
did a fresh reinstall of WIN 10 from scratch on the same system and found that everything worked fine. So, I cloned a drive one more time and went down the upgrade path again and was finally able to isolate the problem child that was causing the DISK I/O to
max at 100%.
After going through a long list of potential applications that could be causing the problem by removing them one by one before the system would lock up, I finally arrived at the ACRONIS software. In my case it was the ACRONIS 14 software that came with my
Crucial SSD. I installed the ACRONIS 14 software in the WIN 7 environment and there it works just fine. However, after upgrading to WIN 10 it caused havoc. Once the ACRONIS 14 software was removed, the WIN 10 upgrade seems just fine and so far
has been stable.
I hope this helps anyone having the same issue. Good luck!

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Issue creating a single PDF from MS Word on Mac

Using Trial Version of Acrobat XI for Mac. I am having issue creating a single PDF from MS Word on Mac. Acrobat is creating multiple files splitting up randomly. Are there any settings to select for ending up with just one PDF fil

Sabian,
As I mentioned before, I have used the following methods, each resulting the same, split up PDF file.
File>Save As - Selected PDF from under the Format dropdown menu.
File>Print>PDF - used Save As PDF
File>Print>PDF - used Save As Adobe PDF
With this information, I think I have tried all that you have asked me to do. Please let me know if I could reach out to a technical consultant or someone else who can help. Thank you.

Having trouble creating the windows 8 installation usb using bootcamp

Hello Everyone,
I am trying to install windows 8 on my early 2013 MacBook Pro retina. I am using Mavericks if that matters. I have got the iso file that I need but I am having troube creating the install disk/usb. Everytime I go to create it, I get an error message telling me that the drive could not be formatted properly. I have looked up possible solutions but nothing seems to work, I have unmounted the iso file, tried putting it on the Mac's HD but nothing I do works. Please help.

Welcome to the Apple Support Communities
After using Boot Camp, your computer will start always in Windows. To start in OS X, just hold the X key while your Mac is starting. If you want to start always in OS X, after starting in OS X, go to System Preferences > Startup Disk, and select the OS X partition.
By default, Windows can't read the filesystem that OS X uses for the partition, so that's why you can't access to the OS X partition. Also, you should have burnt the drivers onto a DVD or a USB drive.
As you have already downloaded the drivers, after starting in OS X, copy them to a USB drive or burn them into a DVD. Then, start in Windows and install them. Note that Windows 8 requires Boot Camp 5 drivers, that you can only get from Boot Camp Assistant if you are running OS X 10.8.3. If you want to be sure that you install the correct drivers, I recommend you to download again the Boot Camp 5 drivers from the Apple webpage > http://support.apple.com/kb/DL1638

How Do I Create a Sparse Disk Image?

I'm having trouble creating a sparse disk image. The instructions I'm following are:
+1. Open Applications->Utilities->Disk Utility.+
+2. Select File->New...->Blank Disk Image.+
+3. Name it, set the size to what you'll need, set the encryption to AES-128, and set the format to sparse disk image.+
- http://forums.macrumors.com/showthread.php?t=257063
The problem for me is I do not see an option for "sparse disk image." The only options I see for Image Format are:
+read only+
compressed
read/write
+DVD/CD master+
Is there something I'm missing?

Nevermind, found it.
Figured out there's a difference between pushing the New Image button in the toolbar vs. going to File > New > Blank Disk Image...

First cluster - Server 2012 r2 - storage spaces issues

Hi Everyone
   We just purchased two new servers (Lenovo RD640's) and an external SAS JBOD enclosure (the Lenovo SA120), and we would like to set up a 2012 r2 failover cluster with clustered storage spaces as the shared storage. Currently they are
on their own domain with the virtual active directory server residing locally on one of the servers.
   Preface: I've created and destroyed the cluster and storage spaces multiple times trying to solve this issue, so I don't know if I may have "leftovers" from those attempts now causing issues for me.
I can create the cluster, and it passes validation, and can create a clustered storage pool, but every time I try to create a virtual disk (either through the Failover cluster manager, the server manager, or powershell), it won't attach. If
I try to manually attach it I get the message: "Error attaching or detaching virtual disk: Failed to attach virtual disk to <node name>. Access denied"
Finally (and I don't know if this is related or not), when in storage spaces on the server manager, there is a gold banner at the top that says "Incomplete communication with cluster <cluster name>. The following cluster nodes or clustered roles
might be offline or have connectivity issues: <cluster name>"
I'm logged in with full domain administrator credentials, and have been running my head against this wall for a few days now. Any help would be appreciated!

Thanks for your responses. Here is what I have to report:
When I destroy the cluster, and create the storage spaces on just one of the two servers (with the other server powered down), I'm able to create the storage pool - using all the HDDs and SSDs - and virtual disks (both tiered and non-tiered) without issue.
As soon as I create the cluster again, the virtual disks become "detached", and I'm back to the situation described initially.
@Apamnapat, here's the output of the powershell commandlets you suggested:
PS C:\Windows\system32> get-storagepool | fl *
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : {Thin, Fixed}
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{1cca13ee-d45c-11e3-80b5-806e6f6e6963}:SP:{1cca13ef-d45c-11e3-80b5-806e6f6e6963}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {1cca13ef-d45c-11e3-80b5-806e6f6e6963}
AllocatedSize                     : 24962849046528
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Primordial
IsClustered                       : False
IsPowerProtected                  : False
IsPrimordial                      : True
IsReadOnly                        : False
LogicalSectorSize                 :
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                :
ResiliencySettingNameDefault      : Mirror
Size                              : 25264456597504
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : Fixed
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:SP:{05303524-5f93-4829-b84a-44955d1eb28e}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {05303524-5f93-4829-b84a-44955d1eb28e}
AllocatedSize                     : 24962849046528
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Primordial
IsClustered                       : True
IsPowerProtected                  : False
IsPrimordial                      : True
IsReadOnly                        : False
LogicalSectorSize                 :
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                :
ResiliencySettingNameDefault      : Mirror
Size                              : 25264456597504
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : Fixed
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:SP:{48e0189b-db8c-11e3-80d3-f80f41fcd134}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {48e0189b-db8c-11e3-80d3-f80f41fcd134}
AllocatedSize                     : 17179869184
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Storage Pool
IsClustered                       : True
IsPowerProtected                  : False
IsPrimordial                      : False
IsReadOnly                        : False
LogicalSectorSize                 : 512
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                : 4096
ResiliencySettingNameDefault      : Mirror
Size                              : 24951612506112
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
PS C:\Windows\system32> get-virtualdisk | fl *
Usage                             : Other
NameFormat                        :
OperationalStatus                 : Detached
HealthStatus                      : Unknown
ProvisioningType                  : Fixed
ParityLayout                      : Rotated Parity
Access                            : Read/Write
UniqueIdFormat                    : Vendor Specific
DetachedReason                    : By Policy
WriteCacheSize                    : 1073741824
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_VirtualDisk.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:VD:{48e0189b-db8c-11e3-80d3-f80f41fcd134}{
                                    c1894936-db95-11e3-80d5-f80f41fcd134}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : 364989C195DBE31180D5F80F41FCD134
AllocatedSize                     : 7516192768
FootprintOnPool                   : 8589934592
FriendlyName                      : Disk Witness
Interleave                        : 262144
IsDeduplicationEnabled            : False
IsEnclosureAware                  : False
IsManualAttach                    : True
IsSnapshot                        : False
LogicalSectorSize                 : 512
Name                              :
NumberOfAvailableCopies           :
NumberOfColumns                   : 8
NumberOfDataCopies                : 1
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalDiskRedundancy            : 1
PhysicalSectorSize                : 4096
RequestNoSinglePointOfFailure     : False
ResiliencySettingName             : Parity
Size                              : 7516192768
UniqueIdFormatDescription         :
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_VirtualDisk
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties

Upgraded to pro X and having issues with form created in pro 9

I created a form in LiveCyle using Pro 9, the form was created for an employer who had to buy Pro X so I was upgraded to Pro X. Here are the issues I am having, This form was the first time I have ever created a form and I have never used Java Script so there is no scripting involved.
1) With Pro 9, if I opend the form with adobe instead of LiveCycle I could delete pages. Now with Pro X I can not however I can delete pages in PDF's that I did not use LiveCycle on. How do I enable exert, delete, insert, etc....
2) I was told that with Pro X it was possible to set the form so that when it's emailed back to the employer after being filled out, it could be secure. I have not been able to figure out how to set that up. The employer needs to receive the completed PDF as a PDF with the information that was input secure (socials, etc... ). If I set up an email button the employer receives a list for information and that does not work for them.
3) The employer would like to have a few fields that they input in the form then secure them or make them read only so the employee can not modify. I know how to do it design mode but it prevents them from being able to input the information they want (employee number for example).
Java Script is totally foreign to me as I am not an IT person I am a novice computer user that is self taught. If I am going to have to learn this, can anyone suggest a website or book for beginners?
Thank you for any help you can provide....
Heather

Hi Heather,
There are a few things going on.
Firstly, forms that are created in LC Designer are fundementally different to native PDF documents. LC Designer forms are known as XFA Forms and are placed in a PDF wrapper, so that they can be opened in Acrobat/Reader. However a lot of the normally editing options (like deleting pages) that you can perform on a native PDF, you cannot do on an XFA Form.
You can set up the form to be emailed back and there are a number of options. The example here (http://assure.ly/dYQFb4 and http://assure.ly/hM2A5y) looks at the standard Submot by Email button down to custom buttons, depending on the functionality you need/want.
One of the things you need to bear in mind is that for users with Reader to be ble to submit the form back as a PDF, it first needs to be Reader Enabled. This is something you can do in Acrobat before you send out the form, but there are license restrictions. See here . http://assure.ly/etkFNU.
You can set up a solution that locks the fields in the form, prior to submission, but you are getting into scripting. There is an example here: http://assure.ly/yDtfsM.
When it comes to resources... see my recommendations here: http://forums.adobe.com/message/4186925#4186925.
I hope that helps,
Niall

I'm having problems backing up my iphone 4 to icloud since 13/04/2012. First it says it's going to take about 5 hours, then it says backup failed. Following instructions-connected to wi-fi, plugged into PC

I'm having problems backing up my iphone 4 to icloud since 13/04/2012. First it says it's going to take 6 hours, then it says backup failed. Following instructions-connected to wi-fi, plugged into PC & locked the phone (though never had any problems like this before), but still no difference. Any ideas/similar problems?

unfortunately there are tons of people with this issue but Apple has not given any answers for us to fix this issue yet. I wish they would allocate more people to solving these problems when they roll out new versions of itunes along with new hardware.

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge dela

I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge delay!!! HELP!!!!

oh and if you use a creative cloud version of Lightroom it could also be that the logon to the cloud is messed up. Logging out and logging back in from preferences in the creative cloud app will fix that. Due to the release of Lightroom CC it appears that adobe's servers have been overwhelmed a bit And many people have strange problems that are solved by logging out and back in.

2012 R2 - First cluster, having issues creating Quorum witness disk

Similar Messages

Maybe you are looking for