2012 R2 Move Replicated VM to new storage - old location still has VHD?

I have this scenario:
Server 1 (Primary Hyper-V)
Drive 1 (Current VHD storage)
Drive 2 (New VHD storage)
Server 2 (Replica Hyper-V)
I am moving a couple of VM from drive 1 to 2 using live storage migration. These VM have active replication to Server 2. The move seemed to go fine and replication resumed properly once the move was finished. The strange thing is the primary VHD seem to
still be on Drive 1. I thought that the final step of the live storage migration would be to delete the old VHD? Once I verify the VM are using Drive 2 I assume I can just delete the files on Drive 1 right?

You are not alone. I am having the same issue.
Testing HV setup in a cluster of two nodes with shared FC storage. Storage is CSV on both nodes.
Storage migration of a VM from C:\ClusterStorage\A to C:\ClusterStorage\B completes without any problem. Upon completion, the source VHDX are still left at C:\ClusterStorage\A. The source files can be deleted manually. All is done through
VMM "Migrate Storage" option. Why the storage migration does not delete the source files upon job completion? Thanks!

Similar Messages

HT4623 I got a new iphone 5 and have transferred my information i am doing a update now but my old phone still has service and my new one says no service.

I got a new iphone 5 and have transferred my information...I am doing an update on my new phone now...My old phone still has service buy my new one is saying no service...What do i need to do? Thank you

I got a similar message, but mine finished restoring pretty soon and then I was able to download and install 7.0.2
Try rebooting your phone to see if that helps.

I cracked my screen on my iPhone 5s does anyone know how much it costs if they need to replace it with a new phone? It still has 6 months in it's year warranty

I cracked my screen the phone still works but I was wondering how much would it cost to have the screen replaced or a cost that they usually charge it they replace the phone with a new one. I still have 6months left in my warranty

Not covered by warranty. Some Apple stores will replace the screen/digitizer, while you wait, for US $149. Call your local store to confirm they do so, then make an appointment.
Otherwise, if your store does not offer this...not available in every country...you're looking at US $269 for an out of warranty replacement.

Cant install new version old one still in use

when i try to install new version it says it cant install as old version is still in use

Make sure you have fully exited Firefox last by using the Quit option. In Mac OS X, applications do not automatically exit when you close the last remaining window as they do in other operating systems.
If you are quite sure that you quit, it's possible that Firefox may have hung in the course of shutting itself down. In that case, you can read these instructions for 'force quitting' an applicaton:
http://www.techiecorner.com/769/how-to-force-quit-program-in-mac-os-x/
Only do that as a last resort though.
Finally, uninstall your existing version of Firefox before attempting to install a new version. You can do that by opening the Applications folder from the Finder, then dragging the Firefox icon to the trash can.

To Create New Storage Unit Automatically

Hi all,
I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
Regards,
techmaster

If you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
Best Regards, Dirk

Moving ASM-based RAC to new storage device

We recently installed Oracle 11gR2 RAC on a REH 5.3 cluster. CRS, Voting Disk, and database files are all sitting on an ASM disk group (on a Clarion storage device). A decision is made to move everything to a new storage device (DMX). We are using EMC powerpath.
Is there an easy way to move this Oracle cluster from one storage device to another.
We can rsync the grid and RDBMS binaries which are installed on a linux filesystem on each node but I would like to know how to go about moving the shared storage which is hosted on the ASM.
We used asmlib 2.0 to create the ASM disk and then relied on the clusterware installer and DBCA to create the disk group, the cluster components, and the oracle database.
Do I need to backup the ASM database as well as our RAC database (using RMAN) into a flat filesystem first and restore them once the new ASM disk is created in the new storage device?
A step by step procedure will be greatly appreciated.
Thanks,
Omer

Yes its possible without backup/restore.. good to take full back in case of any mishappening.
Please read metalink note for step by step process..
Exact Steps To Migrate ASM Diskgroups To Another SAN Without Downtime. [ID 837308.1]
Regards
Rajesh

How do I move databases to a new volume with the same name?

When I first set up Snow Leopard Server, I chose a different volume to keep the databases such as mail, iCal, etc., during the setup program.
I'm running out of space on that volume, so I installed a new hard drive with the same volume name and copied all the files over to it, but when I restarted the server I started getting error messages and no one could send mail. I'm assuming it's a permissions thing.
So I do I move everything to a new volume?

- I logged out as Administrator, and logged back in as Root.
- Disconnected the services in Server Admin.
- Copied the ServiceData folder from old volume "Storage" to new volume "Storage".
- Unmounted old volume "Storage".
- Restarted all services.
Dec 5 12:58:49 companyname dovecot[65]: IMAP(*): stat(/Volumes/Storage/ServiceData/Mail/17D8D54B-0529-4BD6-8467-757C3EA7C75B/tmp ) failed: Permission denied (euid=1025(username) egid=20(staff) UNIX perms seem ok, ACL problem?)
Mail, Web, iChat and Address Book servers do not work.
What do I do now?

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Move database to the new server

Hello,
I have 10.2.0.1 Standard Edition database (7GB, not in archivelog mode) on Windows2003 server, and need to move it to the new server (same environment). I thought to use OEM Clone option, but it appears cloning to the other host is working only in Grid - and I have DB Control.
I know about manual cloning/recreation, but now looking into export and import option. So I think to install Oracle database on the new server, then import some relevant tablespaces exported from the old database. I will use datapump utility in OEM, under system username.
Is that a good approach ? What rules should be applied to avoid problems in that case ? Sorry if it's very basic question, never moved database before.
Marina

Options for porting the database from one server to another after installing Oracle on the new server incldue
Export/Import using expdp/impdp
Rman duplicate to compatiable hardware
Rman file conversion to non-compatiable hardware
On advantage of expdp/impdp is this option supports reconfiguring the database tablespace/file/object storage layout as part of the migration. Also the adoption of new features like ASSM.
A disadvantage is that using expdp/impdp will probably be slower and involve more DBA work than using file copies via rman. There are approaches to reduce the clock time necessary to support export/import and the work is often beneficial for long-term database management efforts.
There have been threads on this topic before and failry recently. You might want to hunt one or two of them down.
HTH -- Mark D Powell --

Migrating Protection group to new storage pool

Hello all running DPM 2012. The environment was setup prior to my arrival and it was setup with 10 1.5TB storage pools. I heard the thinking was this was the recommended size for storage pools. Problem is now we are/have run out of disk space
on those storage pools and jobs are failing with "DPM does not have sufficient storage space available on the recovery point volume to create new recovery points (ID 214)"
I have created new 4 new storage pools of 10TB each and I want to know how I can migrate the protection group data to the new storage pools and have the protection group use the new storage pool moving forward. I want to empty the smaller storage pools
so I can kill them off and create larger storage pools.
Unfortunately the GUI does not allow me to point to specific storage pools, it should, and I'm not familiar with DPM Shell commands.
Any suggestions would be appreciated.

Hi,
http://technet.microsoft.com/en-us/library/dd282970.aspx
The following commands can be used with the ntdisk number as seen in either the get-DPMDISK output, the Windows Disk Management GUI or DPM Management - Disks GUI. In my example disk-0 is the system/boot disk and not used by DPM storage pool.
EXAMPLE These commands show the migrations going from NTDisk 1,2,3,4,5,6,7,8,9,10 to NTDisks 11,12,13,14
$source = get-dpmdisk -dpmserver DPM-SVR-NAME | where {1,2,3,4,5,6,7,8,9,10 -contains $_.ntdiskid}
$source
$destination = get-dpmdisk -dpmserver DPM-SVR-NAME | where {11,12,13,14 -contains $_.ntdiskid}
$destination
Once you are satisfied the outputs are what you want, then run the following to do the migration:
MigrateDatasourceDataFromDPM.ps1 -DPMServername DPM-SVR-NAME -source $source -destination $destination
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

New storage location created in R3- How to push to BW?

HI Friends,
Our R3 consultants created new storage location and how should i push it BW? I checked infoobject: 0Stor_loc. But this is not in 0plant as attribute . How to load the new storage location?
Regards,
Siddhu

Hi,
Storage location infoobject (0STOR_LOC) has to bring as attribute of 0PLANT. Move this from right panel to left so hat storage location will be visible in attributes of Plant.
Sometimes you can maintain as compounding attribute also. Adjust as per your requirement.
Check this once and then load data accordingly.
Also, check the relevant data in ECC before loading to BI.
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on Nov 26, 2009 6:33 AM

HT1329 Can I use my iPod to move my library with new iTunes 11.0? If yes, how??

can my iPod still be used to move my entire library from my old PC to my new laptop? I updated iTunes to 11.0, and the interface is completely new and different, and the previous instructions no longer work...

Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

How do I move my iTunes library from my old computer to my new computer?

I currently have a Gateway 500S PC running Windows XP. I also have a 120GB portable WD Passport USB Drive. My iTunes library is on this computer.
I have just purchased a Dell XPS 410 PC running Microsoft Windows XP Media Center Edition 2005.
My question is how do I move my iTunes library from my old computer to my new one utilizing my portable USB Drive without losing my songs and playlists that originally took many days to set-up?
Gateway Windows XP 120GB portable USB hard drive

Answer received did not answer my question. How about some detail on how to do this?
I currently have a Gateway 500S PC running Windows
XP. I also have a 120GB portable WD Passport USB
Drive. My iTunes library is on this computer.
I have just purchased a Dell XPS 410 PC running
Microsoft Windows XP Media Center Edition 2005.
My question is how do I move my iTunes library from
my old computer to my new one utilizing my portable
USB Drive without losing my songs and playlists that
originally took many days to set-up?
Gateway Windows
XP 120GB portable USB hard drive

2012 R2 Move Replicated VM to new storage - old location still has VHD?

Similar Messages

Maybe you are looking for