2012 R2 RemoteFX 3D Video Adapter Greyed Out

I am running a home Server with 2012 R2 with the Hyper-V role installed, with about 5 Windows 8.1 VM's.  I'm trying to get RemoteFX working, here's my hardware config:
E5-4610 Processor (Supports Slat)
Nvidia GTX 770 (Driver supports WDDM 1.3 with direct X 11)
Gigabyte GA-X79-UD5 (All bios virtual settings enabled)
When I install the Video card driver (tried different versions using windows 8 and windows 8.1 drivers) initially it shows me the checkbox to "Use this GPU with RemoteFX" However after a reboot it says no supported video cards are available.
Before the reboot after installing the driver when it shows the GPU is capable of remote FX, I am not able to add a RemoteFX 3d adapter to a virtual machine because it is greyed out.
After I reboot, if i uninstall and re-install the driver the GTX 770 is available to use again but I still cannot add the RemoteFX adapter to a virtual machine's hardware.
I have done the following:
Verified in DXdiags that the direct X version is 11
Verified in DXdiags that the driver model is WDDM 1.3
Verified the E5-4610 Proc supports Slat or Extended Page Tables
Enabled all the Virtualiztion VT-x settings in the Bios
Verified the video card is supported and certified in 2012 R2
Verified the Remote Desktop Virtualization Host Agent is started in Services.msc
Tried the newest and oldest video drivers for 8.1, and newest for windows 8
I am using Generation 1 vm's as i heard Generation 2 is having problems with RemoteFX
Tried Generatino 2 VM's, there is no option to add RemoteFX hardware
Tried a different GTX 550Ti video card, same issue
Performed all Windows updates for server 2012 R2
Please advise on the next steps to be taken to get RemoteFX working, or if any of the hardware I mentioned above does not support RemoteFX in 2012 R2.
Thanks.

Hi buzzmuff,
Please check the following entries :
1.ensure if the VM is Win8.1 enterprise
2.Please  use RDP 8.0/8.1 to connect the VM then check device manager again
For details please refer to following link:
http://blogs.msdn.com/b/rds/archive/2012/11/26/remotefx-features-for-windows-8-and-windows-server-2012.aspx
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • RemoteFX 3D Video Adapter Enabled VDI with RDWeb

    We have a Win7 Sp1 VDI Desktop Collection with the RemoteFX 3D Video Adapter enabled.   All RDP client hotfixes installed in the image.
    RD Virtualization Host is Server 2012 R2
    I can access these desktops with my RDP client directly only if I change the connection speed to LAN.    I need to make this collection available via RDWeb, however when launching from there it gets to "estimating connection quality"
    and then dies.    I attempted to use powershell to set the collection custom parameters like this:   Set-RDVirtualDesktopCollectionConfiguration
    -CollectionName "[collection name]" -CustomRdpProperty
    "connection type:i:6`nnetworkautodetect:i:0`n[custom properties]"
    Still the same problem persists.
    Any help would be greatly appreciated.

    Hi,
    Thank you for posting in Windows Server Forum.
    Please recheck you are using RDP 8.1 for windows 7 systems.
    This issue occurs because RemoteFX is optimized to only support local area network (LAN) connections in Windows 7 SP1. In other words, you have to use a LAN connection to establish a RemoteFX vGPU Remote Desktop Protocol (RDP) session to a Windows 7 SP1-based
    virtual machine.
    The RemoteFX Network Auto-Detect feature is introduced in Windows 8 and Windows Server 2012 as a new feature. By default, the feature is enabled on a Windows 8-based or Windows Server 2012-based computer. When you start an RDP session from a Windows 8-based
    client computer, the "Detect connection quality automatically" setting is selected by default. Therefore, the session cannot be recognized as a RemoteFX vGPU RDP session by a Windows 7 SP1-based virtual machine.
    KB 2863663 –For server 2012 (Reference)
    More information.
    RemoteFX vGPU Setup and Configuration Guide for Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Audio and Video call greyed out

    Hi. I m using ichat (lion OS) in my mac mini. My problem is cant video call or even call anyone, but people can video call me. When other's call me, both video and audio works fine. But in my ichat all i see is greyed out audio or video call. Please help..

    HI,
    If your Video Menu says  Video Chat  Enabled and your View Menu says the Show Video Status is On and the Bandwidth is set to at least 500kbps then I cannot see why you cannot initiate Chats.
    You should either be able to click a green video icon next to a Buddy or highlight them and then use the icons at the bottom of the list (Or right-click a Buddy and you the pop up menu or highlight and use the Buddies Menu)
    (i.e. there are lots of ways to start a chat)
    If the Buddy is greyed Out but still showing a Video icon (Also greyed out) then that Buddy has  faulty login.
    Dark text Buddies are ON line but greyed out Video icons are then Busy
    8:11 PM      Monday; April 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Apple Video Adapter / Firewire Out Thru Camera

    Hello,
    Could someone explain in somewhat technical detail the difference between playing your timeline out to a TV, through the Video Adapter as compared to Firewire out thru a camera.
    I didn't own a TV - I only watch films on my wall with a projector - but I got a basic TV the other day (I have zero budget) to help with finishing off my film projects.
    It will help to see the DVDs I burn on a TV, as I couldn't do that before (without going to a friends house), but I'm forced to use the Video Adapter and I've read that it's of no use; that you need to go firewire out thru a camera.
    I don't have an firewire in facility on my camera.
    I basically wanted to hear more than what I've read so far. Specifically, what is the difference in technical terms?
    Thru the adapter: is it interlaced on the TV, are the colors different, is it a pixel issue; what's the difference?
    I edit on my iBook with Final Cut Pro, I've got a 19" Diamond Pro 930SB monitor also, and now this basic little TV. They all look different and I'm going crazy trying to figure out which to finish to.
    Buying more kit, or adding something I don't have is not an option; only how to make the best use of what I've got.
    Thanks for any answers or guidance.
    Matt
    www.yogamayafilms.com
    iBook G4 12.1 Mac OS X (10.3.7)
    iBook G4 12.1   Mac OS X (10.3.7)  

    Second what David said about using the output on the computer - it has little real-world use.
    Matt, from looking at your impressive website I'm surprised you aren't more familiar with video technology, or at least have people around you who do. That's actually a complimant.
    There are two essential things using a properly converted CRT will give you.
    The first - coupled with a decent and calibrated video monitor (rather than a TV) - is a consistent standard by which you can judge your work, especially in comlor correction. FOr anything you consider critical work you should also be using scopes.
    The second, assuming you are working in any interlaced format such as PAL or NTSC, is to give you the full temporal and spatial resolution of an interlaced signal. At the least it will allow you to see and correct interlace-related problems which are posted here so often. Your "basic tv" will at least help with this part.
    The FCP manual explains both of these fairly well in more detail.
    I reiterate that the Mac's video output has no relevance to either of these, no matter what the settings.
    If you have shot your own material and brought it into the Mac, didn't you use a camera, a deck, or an analog converter to do that"? If so, you have your converter already.

  • Video kind greyed out

    I have a music video downloaded from itms, a protected MPEG-4 video file which shows up as a movie. All the others show up as music videos. The 'video kind' drop down box is greyed out.
    Is there a way to change it (so it goes from the movie section)?
    Mike

    Thanks for the tip, but this just doesn't work for me. I right click to get the contextual menu, select Set Poster Frame, but nothing happens. Tried this as per original post in both separate window and artwork square.
    I have also noted that the Artwork add / delete buttons are greyed out. Is this related?

  • "Automatically update all videos" is greyed out, how to activate it?

    I would like my 5th generation ipod to automatically update all videos on my laptop, however the options described on this page are all greyed out.
    Can I somehow enable these options?

    I guess I just don't care anymore.

  • SCCM 2012 updates on the console are grey out

    Hi everyone,
    I removed and reconfigure my SCCM 2012 sp1 software update point and now all of the update packages on sccm console grey out.  How do I delete those grey out packages.
    Thanks

    Check this -
    http://blog.coretech.dk/kea/automatic-client-upgrade-greyed-out/
    Ideally when managing Software Update through ConfigMgr it is not recommended to work from WSUS. ConfigMgr should control WSUS using the WCM component.
    You need to run a sync on schedule from ConfigMgr:
    http://postimg.org/image/yde2vwdah/
    If a full sync has already been completed by ConfigMgr then you will have to investigate from wsyncmgr.log,wcm.log & Wsusctrl.log to see if there has been a failure/error during this process.
    Thanks, Prabha G

  • 2012 R2 RBA: Remove / Delete buttons greyed out Administrative users account (sec role/scope) clean up

    I am seeing something odd with one of my RBA settings.  Keep in mind I am seeing this as a 'Full Administrator'.
    I created a new test Security scope, Security Role, created a test Active Directory group and then entered that AD group as a new account name under Security>Administrative users.  I added the new Security Role under the Security Roles tab of the
    Account name (Administrative users) properties and also added the security scope that I created under the Security Scopes tab.  I was able to see all the settings I had created/exported in the RBA viewer and everything with the role worked as desired.
    I am now looking to clean that up but I don't seem to be able to.  I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those tabs.  However, remove and deletes on this
    stuff are all greyed out.  If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one.  The result is that I cannot remove the custom Security Scope, Security Role and ultimately the Administrative
    user.
    Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?

    I am now looking to clean that up but I don't seem to be able to.  I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those
    tabs.  However, remove and deletes on this stuff are all greyed out.  If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one.  The result is that I cannot remove the custom Security Scope,
    Security Role and ultimately the Administrative user.
    Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?
    I'm able to "delete" one admin user or group (account name) from Administrative users node (\Administration\Overview\Security\Accounts). I tried with custom security role/scope etc....even the same user was part of \Administration\Overview\Security\Accounts.
    It seems something wrong with your FULL admin account ? Do you've any other FULL Admin account? If so, can you try with that account?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Video Setting greyed out

    Hi,
    I'm trying to find a way to control my blacks while digitizing footage in via a component cable and a aja Kona LHE card. I noticed that in the clip settings on the digitize window there are slioders for hue,sat, bright, Contras, black and white but they are all greyed out. How do I get these to become useable?
    Thanks

    Please do not double post. It helps matters if you keep threads together.
    http://discussions.apple.com/message.jspa?messageID=8011477#8011477
    x

  • All my pictures and videos have greyed out and don't open says 'loading' but doesn't load

    All my pictures in my photo album seems to have greyed out and not loading up, is there a setting that I may have pressed or something like that?

    Hello, connarbentley. 
    Thank you for visiting Apple Support Communities.
    I would first start with forcing all open applications to close and power cycle the device.  Test opening the Photo App on your device to see if they load.  If the issue persists, see the second article below.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iTunes: Unable to sync photos
    http://support.apple.com/kb/TS3697
    Cheers,
    Jason H.

  • 'Best for video' greyed out in displays prefs

    I finally got my macbook(blackbook running 10.5.8) hooked up to my lcd tv (i have been using my old eMac for this a while) & I'm fooling around with the settings to optimize performance & for some reason the 'Best for video' is greyed out in System prefs/Displays but the overscan function works(both in extended desktop mode & in video mirroring mode. I have always used this function on my eMac (OS X 10.3.9) without any problems. For now I'm using the apple mini dvi to video with an Svideo cable until i can afford to go either the hdmi or vga route, but I'd like to optimize this at least..anybody have a clue why 'Best for video' would be greyed out & how to fix this? could this be because of the Intel GMA 950 Gpu chipset in this generation of macbooks? I have posted to a few forums in the last few days with no answers so far...Anybody?

    I wouldn't worry too much about that setting. I believe all it ever did was set up a difference between blanking and black level, sometimes called "pedestal" in TV/video terminology. It's no big deal. You are probably correct that the GMA950 doesn't support it, so it's grayed out.

  • Audio Follows Video greyed out

    I am working with a sequence that uses clips that were shot DVC Pro 720p 30, NTSC. Suddenly, when looking at interview content in the canvas and viewer, the sync for content from a particular reel is slightly off. I noticed under the view menu / audio playback, audio follows video is greyed out. The only options are default or built in output. At first I thought that was the proglem (can anyone tell me why it is greyed out, and if I need to select this somehow?)
    Interestingly, however, other clips in the project, shot on the same day, do not appear to have the same sync problem. What would cause the sync problem on this one reel? I did not notice the sync problem when previously working with the material.
    Thank you so much in advance.

    I seem to remember this happening before with captured material. Can someone answer the question of whether I should switch the sequence settings to the settings that I used to capture the clip originally?
    Or could the clip have been corrupted, and if yes, what to do? Or is the simplest solution to re-sync by eye? It's sort of like when the data flow isn't fast enough and sync is lost.
    Thanks to all for your comments.

  • Unlink Audio & Video greyed out in Premeire Elements 13 (Windows 8.1) [new user]

    I posted (or at least I thought the post worked) this question Mar.27th but I can't find it or any replies I may have gotten so if anyone knows its whereabouts I'd appreciate you're telling me how to see it so I won't have 2 threads running for the same question. My question is: why is the option to unlink the audio and video tracks greyed out when I'm trying to substitute part of an audio clip (without ruining the synchronization between the existing audio and video). I'm working with a saved "projectX.prel" file. I noticed when I opened a new project that the UNLINK option is active. This seems contrary to logic i.e wouldn't the unlink action be more likely to be needed when working on an existing file as opposed to when working on a brand new file? How can I separate the 2 components (audio & video) so I can edit just the audio clip without the UNLINK procedure working? Would really appreciate any help anyone can offer with any of the foregoing. Thanks.

    garryw
    Thanks for the reply. Glad that suggestion C worked for you.
    Is there any remote possibility that the video and audio are really unlinked to start.
    Let us take suggestion A, you say that Link Audio and Video is active choice for what you believe to a linked video audio on the Timeline.
    You have your clip in the Expert workspace and the clip is not selected as represented in screenshot 1.
    If you click on the Video 1 portion of the clip, does the video portion and audio portion highlight to look like what you see in screenshot 2
    where the video and audio portion both look highlighted.
    Or, if you click on the Video 1 portion of the clip, is it just the video portion that looks highlighted and the audio part
    continues to look unhighlighted? As seen in the next screenshot 3?
    Depending on your answers, we may next delete the Adobe Premiere Elements Prefs file which can be found
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    13.0
    and in the 13.0 Folder is the Adobe Premiere Elements Prefs file which  you delete. If that does not work, then delete the whole 13.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path given.
    As your schedule permits, looking forward to learning of your progress.
    Thanks.
    ATR

  • Invite to video chat is greyed out

    why is my invite to video chat greyed out in ichat?

    Hi,
    Open the Connection Doctor from the Video menu.
    In Capabilities it probably says your internet is too slow with red crosses next to the Video options
    Leopard and Earlier.
    Go to the System Preferences > Quicktime > Streaming
    Change the speed to the one with 1.5Mbps in it
    Restart iChat if open.
    All Versions on iChat.
    Go to iChat > Preferences > Video Section.
    Make sure the Bandwidth Limit is not below 200kbps  (500kbps is fast enough for 4 way Video Chats with you as Host and has benefits on high speed Internet connections in smoothing out any variances - A 5% variance on a 10Mbps Upload as well as Download can be 500kbps in round-ish sort of figures)
    Check iChat's View Menu
    Show Video Status also needs to be On.
    The Buddies Menu (And the Right Clicking of a Buddy) Invite things can be greyed out if the Buddy cannot Video
    Most likely they are using AIM for Mac or one of the text only Multiple service apps like Adium of ProteusX.
    9:33 PM      Friday; June 3, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Took videos with the same camera some are greyed out some are not

    when trying to import videos to imovie some of my videos are greyed out some are not...they were taken with the same camera.....how do i fix this

    Hi,
    Firstly, I still suggest you using gpresult command to check your current GP settings. Follow the steps below to generate GPReport:
    1. Open CMD
    2. cd desktop
    3. GPRESULT /H GPReport.html
    4. GPReport.html
    Secondly, you can use Process Monitor to capture the process of encrypt drive with Bitlocker, then check if there is any
    Access Denied items.
    You can access to the link below to download Process Monitor:
    https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    How to capture a Process Monitor trace:
    http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
    Learning Example:
    Using Process Monitor to Troubleshoot and Find Registry Hacks:
    http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for