2012 SP3 Client - randomly expands proxy user folder list

Since Client 2012SP3, when going to a proxy user we noticed that the proxy mailbox randomly expands the folder list.
This is sometimes annoying, cause you have to close several folders every time.
Going back to the home mailbox we also noticed the expanding of the folder list. Going back to the same or another mailbox, the folder structure is wide open again.
Sometimes only one folder expands, sometimes several, sometimes all.
This happens to all clients and all proxy mailboxes. (users, resources).
Workaround: Rolling back to 2012SP2 the expanding problem has gone. The folder structure is just so as we left it behind last time. I can switch to several proxies, back to my mailbox, back to another proxy - no problem at all.
Anyone noticed this? Is any FTF SP3 client out there?
Client OS is Win7 - 64bit.

lis,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

ConfigMgr 2012 R2 Client Failes to Install on HP EliteBook laptops with Synaptics Touchpad drivers

I've come across a fairly frustrating issue that has been taking up way too much of my time that past week or so. The issue started a little after some of our larger sites were migrated from SCCM 2007 to SCCM 2012. I started getting complaints that one of
our technical workstations (HP 8770w) was not deploying properly. I started investigating the issue and the problem involved the removal of the old ConfigMgr 2007 client and install of the new SCCM 2012 R2 client.
The Windows 7 x64 OS WIM that I am using is one that was migrated from the 07 to 2012 environment and it has been working fine. During the Setup Windows and ConfigMgr step the old client is removed and the new one for the 2012 environment installs. There
has not been any issues with this, but I feel something has changed now that we are deploying the 2012 R2 client.
Back to the issue, what happens is that the ConfigMgr client fails to uninstall the old client. Looking in the client.msi_uninstall file you will see that it is unable to locate a couple of SCCM 2007 configmgr client patches that were installed so it can
uninstall it. I get the "Couldn't find local patch ''. Looking for it at its source." line in the uninstall file. When I look for that under HKEY_CLASSES_ROOT\Installer\Patches the ENTIRE directory structure is empty. There is not a single item
listed under patches.
Since the only thing that happens in between the pushing down of the WIM and installing the configmgr client is the drivers that is where I started to look. I started over with the basics (disk and network driver) and it was able to complete the OSD process
(like the other 30+ models we currently support). I added drivers one by one having the system re-image each time. When I got to the Synaptics TouchPad drivers the issue would return. I've tried around 5 different drivers offered from the vendor and they
all result in the same behavior.
I'm still actively troubleshooting how to FIX this issue, but I have no idea why this is going on. I thought I would share with the community on this issue and see if anyone else has observed this VERY odd behavior.
Here is a snippet from the client.msi_uninstall log:
=== Verbose logging started: 1/15/2014 22:59:34 Build type: SHIP UNICODE 5.00.7601.00 Calling process: D:\_SMSTaskSequence\OSD\GAS000EF\ccmsetup.exe ===
MSI (c) (6C:BC) [22:59:34:264]: Resetting cached policy values
MSI (c) (6C:BC) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (c) (6C:BC) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (6C:BC) [22:59:34:264]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (6C:BC) [22:59:34:264]: Grabbed execution mutex.
MSI (c) (6C:BC) [22:59:34:264]: Cloaking enabled.
MSI (c) (6C:BC) [22:59:34:264]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (6C:BC) [22:59:34:264]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:264]: Running installation inside multi-package transaction {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
MSI (s) (00:80) [22:59:34:264]: Grabbed execution mutex.
MSI (s) (00:D4) [22:59:34:264]: Resetting cached policy values
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (s) (00:D4) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (00:D4) [22:59:34:405]: SRSetRestorePoint skipped for this transaction.
MSI (s) (00:D4) [22:59:34:405]: End dialog not enabled
MSI (s) (00:D4) [22:59:34:405]: Original package ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: Package we're running from ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2609EDF1-34C4-4B03-B634-55F3B3BC4931}'.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (00:D4) [22:59:34:420]: MSCOREE not loaded loading copy from system32
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: User policy value 'DisableMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {D478B8EE-EE0A-4004-980B-4D55533EE3C2} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {D478B8EE-EE0A-4004-980B-4D55533EE3C2} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: SequencePatches starts. Product code: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}, Product version: 4.00.6487.2000, Upgrade code: {252DA259-82CA-4177-B8D0-49C78937BA3E}, Product language 1033
MSI (s) (00:D4) [22:59:34:420]: SequencePatches returns success.
MSI (s) (00:D4) [22:59:34:420]: Final Patch Application Order:
MSI (s) (00:D4) [22:59:34:420]: Other Patches:
MSI (s) (00:D4) [22:59:34:420]: Internal Exception during install operation: 0xc0000005 at 0x000007FEFDBF35E1.
MSI (s) (00:D4) [22:59:34:420]: WER report disabled for silent install.
MSI (s) (00:D4) [22:59:34:420]: Internal MSI error. Installer terminated prematurely.
MSI (s) (00:D4) [22:59:34:420]: MainEngineThread is returning 1603
MSI (s) (00:80) [22:59:34:420]: No System Restore sequence number for this installation.
Unexpected Termination
MSI (s) (00:80) [22:59:34:420]: User policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:80) [22:59:34:420]: Restoring environment variables
MSI (c) (6C:BC) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:BC) [22:59:34:420]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/15/2014 22:59:34 ===

@Narcoticoo
I've not used the tool. This issue has also expanded since the original title as I'm getting the same behavior with the driver package that does not include the Touchpad driver anymore. I'm currently going back to just the network and storage driver to see
if it works or not.
However, this is the bigger issue I have:
I have an older build called Build 5.7 internally. Using that WIM and the same driver package (original one that has the Touchpad driver included) it works without issue. Never had a problem.
The new build is called Build 6.0 internally. This WIM and the same driver package has not been working at all.
We support about 35 models with our current Windows 7 x64 image and I am having the same failure issue on four different HP models. They are the 8770w, ZBook 17, Z600 and Z820. The majority of the other systems are Dell devices. Just for transparency sakes,
nothing Dell specific is in the core WIM that is captured.
So, Build 5.7 can deploy just fine on all pieces of hardware with their old driver packages. The new Build 6.0 intalls on almost every platform fine with their old driver packages. These four HP systems are nothing but trouble though. I've opened a case
with HP to see if they have noticed anything internally. I'm not too hopeful, but at least it is something. Maybe there is some odd conflict with a newer Windows patch or some odd dependency on older HP drivers. The new image has .NET 4.5.1, IE 10 and so forth.

How to access application server 10g, if client machine is proxy settings.

hi,
i have installed oracle application server 10gR2, on vertual machine, windows2003
my forms are stored in forms folder , i can access the application/forms
throuhg client machines, if proxy setting is unchecked, but if proxy is chacked can't access application.
as there with the user machine is required with proxy setting. how
to access the application. i mean what is the configuration.
in application server so that any computer (client machine)
can access weather it is having proxy setting or not.

now i enabled the java console to see the trace, there i found. if proxy is checked in client brouser with 8080 port which is required by organisation.
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\fresh
Proxy Configuration: Manual Configuration
Proxy: eproxy:8080
Proxy Overrides:
Jar cache disabled by user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Where as if there if i remove proxy setting by uncheck. then application goes smoothly.

Quickviewer and Proxy user

When a user with Proxy Access to a certain mailbox opens a forwarded (as attachment) message in this mailbox by using the Quickview Attachment Window and next tries to open the enclosed attachment the Groupwise Client gives a "c081" error, Missing BLOB file on add/modify. This only happens when the user with Proxy Access en the 'certain mailbox' exist on different PostOffices.
When the same message is opened by the same Proxy user, but now from the Mailbox folder (and not via the Quickview) the forwarded message and attachment can be opened without any problem.
Our Groupwise Agents and Clients are GW7sp3HotPatch4.
Can anybody out there reproduce this at their Groupwise environment? Or even better, does someone have an idea about the cause and/or solution?
Thanks in advance.

keersen,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SCCM 2012 R2 Client only showing 2 items under Actions

I've enable AD Forest Discovery on Primary Site also checked Automatically create AD site boundaries when they are discovered and Automatically create IP address range boundaries for IP subnets when they are discovered.
I didn't change this (default) Disable AD Forest Discovery on CAS.
I am still running SCCM 2007 R3 SP2 in Production environment. Do I need to remove all the boundaries first on SCCM 2007? Before I could install SCCM 2012 R2 client?
The reason that I manually install SCCM 2012 R2 client to my test computers just want to see if the SCCM 2012 R2 client will install without any issues. Right now, there's :(
On my Client Push Installation Properties, I haven't Enable automatic site-wide push installation. I just don't want SCCM 2012 R2 client is automatically pushing it out. Should I enable this? Is there any effect?
Two nights ago, I manually deploy SCCM 2012 R2 client (right click to deploy SCCM Client) to my test Win7x64 Enterprise and Win8.1x64 Enterprise. Until this morning Actions are not fully there (it should be total 11)
SCCM 2012 R2 client (version 5.00.7958.1000) installed but SCEP 2012 is not install (I think there's a problem here) since I checked the Actions button on both of Win7x64 Enterprise and Win8.1x64 Enterprise are only showing 2 Actions:
1. Machine Policy Retrieval & Evaluation Cycle
2. User Policy Retrieval & Evaluation Cycle
I've checked on both of Win7x64 Enterprise and Win8.1x64 Enterprise logs (using CMTrace):
1. CcmExec.log -> no errors
2. LocationServices.log -> Current AD site of machine is Default-First-Site-Name
3. ClientLocation.log -> It knows my new MP (correct one)
4. ClientIDManagerStartup.log -> with errors below
ClientIDManagerStartup.log has lots of RED errors (same one):
<![LOG[RegTask: Failed to send registration request message. Error: 0x8000000a]LOG]!><time="11:26:13.695+420" date="07-03-2014" component="ClientIDManagerStartup" context="" type="3" thread="1716"
file="regtask.cpp:1297">
I am hoping someone will be able to point me to the right direcly, please. Thanks, Reza
Reza Prawirasatya

Idan,
Thanks for the info.
I have check this registry below:
Check in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Mobile Client
It's pointing to my new site code of SCCM 2012 R2 (it's not SCCM 2007 site code).
What I did wrong I deploy SCCM 2012 Client Custom Settings to a collection that I created and also Antimalware Policies to that collection as well where that collection has 0 (none members).
So I deleted and just simply pointed both SCCM 2012 Client Custom Settings and Antimalware Policies to All Systems and all my test computers (workstations & servers) have SCCM 2012 R2 client along with SCEP 2012.
I have more questions below:
What's the best way for me to approach this SCCM 2012 R2 Client push to a test computers (workstations and servers).
I have SCCM 2007 R3 SP2 is still running in Production, currently Boundaries set as IP subnet (not using AD Site, it used but I changed it 2 years ago).
Now, SCCM 2012 R2 Primary Site set Enable AD Forest Discovery with Automatically create AD & Automatically create IP address range boundaries for IP subnets.
Of course, by turning this option above, it will pick up lots of different IP subnets. Even the one our sister company (lots of different domain).
1. In SCCM 2012 R2 Boundary Groups, I set Default-First-Site-Name (AD Site), under Site Systems tab, I have also my Primary Site SCCM 2012 R2 here.
Here's the questions:
1. Do I need to add IP subnet in SCCM 2012 R2 Boundary Groups? Do I need to add let's say 10.xxx.20.xxx (IP subnet here).
2. Also, do I need to delete IP subnet in SCCM 2007 Boundaries that correspond to that IP subnet? Let's say I have 10.xxx.20.xxx (IP subnet here) and remove this one since I have added on number 1?
Reza Prawirasatya

How do I MERGE several "ghost" copies of my user-folder back into one single identity?

This is my current storage directory for THUNDERBIRD: (on my nearly brand-new PC workstation!)
C:\Users\davidlew\AppData\Roaming\Thunderbird\Profiles\409424bt.default\Mail\pop.shaw.ca
All of it's folder-icons in the left-most column are mute/empty/unresponsive...
Others that I would like to "fold in" to this identity are located in analogous file-paths
such as:
niser0eab.Davidlew
and
zf1bouv3.default
--inside each of these three setups
such as:
C:\Users\davidlew\AppData\Roaming\Thunderbird\Profiles\409424bt.default\Mail\pop.shaw.ca
and
C:\Users\davidlew\AppData\Roaming\Thunderbird\Profiles\zf1bouv3.default\
and
C:\Users\davidlew\AppData\Roaming\Thunderbird\Profiles\niser0eab.Davidlew.default\Mail\pop.shaw.ca
.....each of these three setups contain the "same"set(s) of subfolders:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
panacea.dat
parent.lock
permissions.sqlite
persdict.dat
places.sqlite
pluginreg.dat
prefs.js
saved-telemetry-pings
search.json
secmod.db
sessionCheckpoints.json
signons.sqlite
Telemetry.ShutdownTime.txt
times.json
training.dat
traits.dat
virtualFolders.dat
webappsstore.sqlite
xpunge-extension-prefmigration-existing-new-prefs.txt
xpunge-extension-prefmigration-old-prefs.txt
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
---However, NONE of these message-organizing sub-folders ACTIVELY show up within Thunderbird...
ALL of them seem to show "ghost" copies of the folders and subafolder---in the left-column folder-list view window
but they are mute and unresponsive, and do not SHOW the .emlx messages contained within them....
Drilling into the PC's filing-system (Window Explorer, like Apple's FINDER) does show that the indiv. emlx. mail files
DO exist and ARE readable as plain-text----ugly as hell with header information aond other control characters framing the text-message contents.
How do I "shuffle together" (merge?) the various user-folders into ONE user folder, without overwriting folders and messages?
How do I resurrect the functionality of the "ghost" folder icons in the left-most column?
Such that clicking on a folder with show it's contents, or expand to show it's SUB-folders...
Please Advise!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Best regards,
David A. Lewis a.k.a. "themacguy"
[email protected]

https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

How do I move the /Users folder to another disk

I have a shiny new MacPro, dual proc, with four, one TB hard drives in it, running OS X Server on Mountain Lion. The first disk is the startup drive, the other three are simply empty, partitioned drives.
I am to be the sysadmin for this machine (and a half dozen Macbook Pros) for my organization. I don't want user data to exist on the startup disk on this machine. Right now, the only user that exists is my sysadmin account. I want the three non-startup hard disks to hold the user data. I think that what I want to do is map the /Users folder to one (or all) of the other three hard disks, and get that data off of the startup disk.
How do I change the location of the /Users folder?
Assuming this is possible, or desirable, the next question would be about RAID. I have not created any RAID arrays using disk manager yet (this Mac Pro does not have a RAID card).
Should I first create a concatenated RAID set from the three additional disks? I see no advantage to striped or mirrored sets, I will have a HUGE external drive for TimeMachine, and disk access speed is just fine. But, I think I'd want drives 2, 3, and 4 to act as one big drive. I think the concatenated RAID set is the answer to that.
Thank you,
Jess

How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
I would only use TimeMachine as an add'l, not primary, or only method for backups.
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
With drives of 2, 3 or 4TB now why use three and the one time I used Apple's concatenate, no I didn't like the way it made use of drives. So I would either stripe or mirror, and maybe not even using Apple Disk Utility.

'log' file in user folder

I just opened my "User" folder in the finder and noticed there is a random file in there named 'log'.
When i open it in textedit, there is just one line of text: "cp_plugin_dir:/Users/Mitchell/Library/Internet Plug-Ins"
What is this file and is it safe to delete?
Thanks

I don't know what caused it but it only a (misplaced) log file so you can safely delete it. Of course whatever caused it (a poorly written internet plugin installer?) may create it again so the mystery of the cause remains. Keep an eye out for it and maybe you can associate some action you do with its reappearance.

Error when connect proxy user

i using ODP.NET connect to oracle database with proxy user, when i connect with a password not correct then i can't again connect with password correct after.
string[] cs = new string[2];
cs[0] = "Data Source=orcl;User Id=user1;Password=pass1;"+
"Proxy User Id=proxyuser;Proxy Password=pass;Pooling=true";
cs[1] = "Data Source=orcl;User Id=user1;Password=pass2;"+
"Proxy User Id=proxyuser;Proxy Password=pass;Pooling=true";
using (OracleConnection oc = new OracleConnection(cs[0]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
using (OracleConnection oc = new OracleConnection(cs[1]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
using (OracleConnection oc = new OracleConnection(cs[0]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
Part 3: always wrong. it can't open
Please help me.
Message was edited by:
bvnhan

Hi,
I tested the following and got the expected results (doenst connect). I'm using 10.2.0.2 ODP, and got the same behavior pointing to 9206 db and 10.2.0.2 db.
I did a quick check and dont see any obvious related bug fixes in ODP, but if you're not using 10.2.0.2 ODP, you might want to try that.
Here's exactly what I tested.
Cheers
Greg
CODE
==========================
drop user proxyacct cascade;
drop user puser1 cascade;
create user proxyacct identified by pass;
create user puser1 identified by pass;
grant connect, resource to proxyacct;
grant create session to puser1;
ALTER USER puser1 GRANT CONNECT THROUGH proxyacct AUTHENTICATED USING PASSWORD;
using System;
using System.Data;
using Oracle.DataAccess.Client;
public class testproxy
public static void Main()
string goodstring ="data source=orcl;user id=puser1;password=pass;proxy user id=proxyacct;proxy password=pass";
string badstring = "data source=orcl;user id=puser1;password=;proxy user id=proxyacct;proxy password=pass";
using (OracleConnection oc = new OracleConnection(goodstring))
try
     oc.Open();
     Console.WriteLine("con1 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught1 " + ex.Message);
using (OracleConnection oc = new OracleConnection(badstring))
try
     oc.Open();
     Console.WriteLine("con2 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught2 " + ex.Message);
     // still need this to work around the problem
     // of next connection getting the same error this one did
     OracleConnection.ClearPool(oc);
using (OracleConnection oc = new OracleConnection(goodstring))
try
     oc.Open();
     Console.WriteLine("con3 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught3 " + ex.Message);
MY OUTPUT
===============================
con1 connected
exception caught2 ORA-28183: proper authentication not provided by proxy
con3 connected

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

A network error when i tested the connection of a proxy user

Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz

Originally Posted by LPIROVETZ
Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz
From the docu:
Click the Authentication tab, then specify the following information:
Proxy name and password: Specify the fully qualified, comma-delimited name and password for the proxy user used to access the OES, NetWare or Windows, server. (You can use the Browse icon next to the Proxy field to browse the LDAP directory for the proxy user that you want to use.)
IMPORTANT:Before you specify a proxy name and password for the Net Folder server, ensure that you review the information in Section 8.1.2, Planning the Net Folder Server Proxy User.
Test connection: Click this button to ensure that the path is accurate and that the credentials are valid, then click OK after the test succeeds.
Sometimes proxy users with the incorrect context pass this test. Ensure that the context for your proxy user is correct, as described in Expected Name Format for File Servers.
Authentication type: Select the authentication service for the file server that you are connecting to. This option corresponds with the Server type setting that you selected on the Configuration tab. If you selected OES or NetWare as the server type, only Novell NMAS is available as the authentication type. If you selected Windows as the server type, you can select either Kerberos, NTLM, or Auto detect as the authentication type. (Auto detect means that it tries authenticating with Kerberos first, and if that fails, authenticates with NTLM.)
NOTE:If Kerberos is selected as the authentication type, ensure that the DNS name server is able to resolve DNS queries for the Active Directory domains.
If the Kerberos port (port 88) is disabled on the Windows server, select NTLM as the authentication type.
So you should use comma delimited name for the username... Did you also try browsing for the user using the icon there?
Does is log any specific error message in /opt/novell/filr/apache-tomcat/logs/appserver.log file when you try to test the connection?
Thomas

Mail says can't get more mail user folder full.

i have been getting this message often and had found a suggestion on removing an envelope in the mail folder which I did and it seemed to have solved the problem for a couple of weeks. I can easily get 600 emails a days, different mac email groups that I subscribe to and there are time I don't get to my mail for 3 or four days and never get the message. I logged on this morning and there was the message that I had to much mail and needed to remove mail or make space in my user folder. I closed down mail came back up went off line and I only had 115 emails in my primary account and 28 emails in my hotmail account. I checked he three trashes and had 471 total item in all trash folders.
What is going on.. how do I fix this. Are other people experiencing this same problem? It seems to have come about around 10.4.6 and the security update about that time.
Leon
Mac Mini 1.42 8X DVD+-RW Dual Layer 24X CD-RW 250 Gig Ministack Version 2 Mac OS X (10.4.6) Apple Bluetooth keyboard 19" Nec VGA CRT Flat Screen 1 Gig Memory iSight

Did you upgrade to Tiger from Jaguar or Panther?
A couple of years ago I received a batch of emails that I had
already received, and read, about 18-24 months earlier. Where were
they all that time? Why did Earthlink send them to me again after that
long delay?
I don't believe Earthlink sent these again since any messages available on the server are downloaded from the server by an email client such as the Mail.app.
What is your setting in Mail for removing messages from the server when downloaded which is available at Mail > Preferences > Accounts under the Advanced tab for the account preferences?
I don't believe this is an issue with what occurred here. More than likely, this was caused by corruption to the account's Inbox mailbox and these messages already downloaded from the server and removed from the server when downloaded reappeared in the account's Inbox mailbox only as new unread messages which were not properly or completely deleted (if these messages were previously deleted from the account's Inbox mailbox) or not properly or completely removed if some or all of these messages were transferred to a user created "On My Mac" location mailbox.
How often do you use the Rebuild Mailbox function on the most active mailboxes such as the account's Inbox and Sent mailbox?

Blank files appearing in User Folder???

Hello,
I'm not quite sure what to call it, but my "user folder" contains Desktop, Documents, Downloads, Movies, Music, etc. in Finder. It's the folder that is my name.
Anyway, I've noted that there are a bunch of random blank files that have appeared in this folder, such as:
}%FB%F500
1%BC[
9$%92%E2%8F%F9prS}{r%92
YZh2%D6
It says there are all plain text, and zero KB.
Does anyone know what these are and why they have appeared? Will it mess anything up if I just delete them?
Thanks!

I remember having things like that pop up when using some open source app.
I can't recall which one it was, but something to do with time management or mind mapping.
I guess (at least in my case) it was probably sloppy programming leaving behind empty temp files.
I'd just trash them.

What's the deal with the Applications folder within the User folder?

In my user folder (the one with my name) there's another Applications folder filled with .cab files that are all dated, and some have "Audio" or "ACT" or some weird naming in the middle. Some examples of what they're called are: Nov2008_XACT_x64.cab ; Oct2005_xinput_x64.cab ; OCT2006_d3dx9_31_x64.cab ; Nov2008_XAudio_x64.cab
1) What are .cab files?
2) Why are they there, did an external program add them or something?
3) Can I delete them?
Thanks for your help, it's always been bugging me having this folder filled with files that (seemingly) do nothing.

Paul --
They're files from Word.
If it were my Mac, I'd trash them. Here's what I found on them similar to what WZZZ found for you;
Opening the CAB
You will download a file whose name consists entirely of a number and which has the extension .cab. A .cab is a Microsoft “cabinet” file: essentially it’s a Zipped folder structure with the ability to store longer file names.
Depending on your version of Mac OS, the built-in Zip utility may not be able to open it, but there are programs that can. If you are on a Power PC-version Mac (A G3 or a G4 or a G5...) then Stuffit Expander will do the trick. If you have an Intel-processor Mac, Stuffit has a bug that may prevent it. Only one way to find out...
If your browser is correctly set up, it will leave the file in your Downloads folder with a subfolder above it containing the unpacked content.
If you can’t find it, start Stuffit and drag the .cab onto it.
Stuffit will either issue an error message, or it will leave a folder containing the template in the same folder as the .cab file. If you get an "Error 17540" from Stuffit, that means "Can't understand the format" and the extracted template file will not be useable.

SCCM 2012 R2 ADR issue with proxy authentication

Hi,
We're migrating SCCM 2007 to SCCM 2012 R2.
In SCCM 2007, the proxy server is configured with user authentication, and this works.
In SCCM 2012 R2, the Software Update Point is installed locally and connected with a local WSUS 4.0 (Server 2012)
We use a proxy with user authentication for Update Deployment. (This user is the same as configured in SCCM 2007.)
The Proxy Server is Blue Coat SG.
The proxy account is used for:
The Synchronization works, but Automatic Deployment Rule (ADR) doesn't work.
When an Automatic Deployment Rule is started, it tries to authenticate 3 times.
The Patchdownloader.log shows:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername>\root\SMS        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\3208bb5e-bcd9-4389-a0c9-02ef33ccb998.1\XPSEPSC-x86-en-US.exe .        Software Updates Patch Downloader        11/8/2013 12:19:07        3608
(0x0E18)
Contentsource =
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe .        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Downloading content for ContentID = 16819067,
FileName = XPSEPSC-x86-en-US.exe.        Software Updates Patch Downloader        11/8/2013 12:19:07        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:19:07        8364
(0x20AC)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
HttpSendRequest failed HTTP_STATUS_PROXY_AUTH_REQ        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
Download
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe to C:\Windows\TEMP\CAB6FD2.tmp returns 407        Software Updates
Patch Downloader        11/8/2013 12:19:07        8364 (0x20AC)
ERROR: DownloadContentFiles() failed with hr=0x80070197        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Then the proxy user account is locked:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to \\ <servername>\root\SMS        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:20:11        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\e0a54221-3ff2-4129-b7cf-89bf5cd1f726.1\Windows-KB943729-x86-ENU.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Contentsource =
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Downloading content for ContentID = 16824262,
FileName = Windows-KB943729-x86-ENU.exe.        Software Updates Patch Downloader        11/8/2013 12:20:12        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:20:12        12480
(0x30C0)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
HttpSendRequest failed HTTP_STATUS_FORBIDDEN or HTTP_STATUS_DENIED        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
Download
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe to C:\Windows\TEMP\CAB6E4B.tmp returns 403        Software Updates
Patch Downloader        11/8/2013 12:20:12        12480 (0x30C0)
ERROR: DownloadContentFiles() failed with hr=0x80070193        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
The RuleEngine.log shows:
Failed to download the update from internet. Error = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
Failed to download ContentID 16824467 for UpdateID 16819978. Error code = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
It seems that the ADR uses a wrong password when authenticating with the proxy, but this same user works when synchronizing with WSUS.
We performed the following actions with no result:
run the ADR manually and automatic,
reinstalled WSUS and SUP,
changed proxy user account.
Regards,
Matthias

Currently, the command shows:
Current WinHTTP proxy settings:
    Direct access (no proxy server).
We've been testing with:
upddwnldcfg.exe /s:<proxyserver>:<port> /u:<user> /allusers
psexec -i -s iexplore.exe, set Internet Explorer proxy manually
All with same result, proxy user getting locked when ADR runs.
(These settings have been removed after the test.)
I think dekac99 would suggest netsh winhttp set proxy or import proxy.
then turn off proxy use on the role SUP (this way not SCCM will send auth but all winhttp will use proxy)
the problems with that for me are:
- if MS implemented role-based proxy usage, why set at http layer - of course this might work as a workaround for the time being so it might be a good idea but I'm just not sure what unwanted issues it may cause
- the other thing is where I'm not sure, with set proxy you cannot define authentication account. if you use import from IE and the IE prompted for proxy auth, the stored credential will be used on winhttp layer (though I'm not 100% sure of that) - so this
is just too uncontrolled for me
- upddwnldcfg.exe will need to run in the name of system account (it stores credentials under HKCU so far I know it will be a per user based setting)
--> what confuses me, the catalog synch works which should use the same configured proxy and account(?), only ADR does not work. shouldn't they both use the same process for sending account auth info?

2012 SP3 Client - randomly expands proxy user folder list

Similar Messages

Maybe you are looking for