2013 AEBS works w/ 1 MBP but not with 2

I have a new 2013 AEBS in new office with TWC-BC via UBEE modem/router.  AE is configured in Bridged mode.  I have 2 MBPs, iphones, ipads, etc connected wirelessly.  I have 1 windows machine wired.
Everything works great until I have both MBP's connected.  When both are connected one of the 2 continues to work great but the other's internet performance goes to basically nothing.  It will sporadically download content but is basically useless.  As soon as I disconnect the working laptop the failing one picks right back up.
It is consistantly the same machine that continues to work of the 2.
Any help would be appreciated.
Keith

That is typical sort of problem I expect and do see over and over in the PC world.
How big a gap is there in the age of the two MBP? Are they both running the same OS?
If they are different it would be helpful to give us the info from the System Profiler so we can see which cards and drivers are in each machine..
If you can copy and paste that info.
So mine looks like this.
en0:
  Card Type:          AirPort Extreme  (0x14E4, 0x8E)
  Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.36.9)
  Locale:          FCC
  Country Code:          AU
  Supported PHY Modes:          802.11 a/b/g/n
  Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
  Status:          Connected
That is on the older machine.
Here is the 2011 MBP
en1:
  Card Type:          AirPort Extreme  (0x14E4, 0xD6)
  Firmware Version:          Broadcom BCM43xx 1.0 (5.106.98.100.17)
  MAC Address:          e0:f8:47:19:fb:72
  Locale:          APAC
  Country Code:          AU
  Supported PHY Modes:          802.11 a/b/g/n
  Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
  Wake On Wireless:          Supported
  AirDrop:          Supported
  Status:          Connected
As something to try..
Give a different name to 5ghz band.. and force one computer to 5ghz .. the closer one.. and see if that balances it better.
How much download capacity does your ISP give you and is one wireless connection using it all??

Similar Messages

  • Title overlay works fine on MBP but not imac. Why?

    Hello,
    I have this problem with putting a title into FCPx that happens on my iMac but not on my MacBook Pro.  I am hoping someone in here can explain to me why, and how to fix it.  These are screenshots of the issue on my iMac, as well as screen shots of what it looks like when it's on my MacBook Pro, which is the way it's supposed to look.
    The titles are .mov files with a transparent background.
    iMac view -  This is the original view on my timeline with NO title added 
    iMac view again -  This is the view on my timeline when I put the title over my video on my iMac
    MacBook Pro - It works perfectly on my MacBook Pro as can be seen here.  This is the same exact frame as it is on my iMac.
    FCPx is the most recently updated version on both.  I just really need help with figuring out why it works on my macbook pro, my husband's macbook pro, but not my iMac.  They are all the same version of FCPx.
    Thanks so much,
    K-

    You must be using proxy media on the iMac.
    The ProRes proxy codec does not support an alpha channel, so the transparent parts would be black, as you are getting.

  • AJAX with PageMethods works in Application Pages but not with PageLayouts

    Hi All,
    I have created a class which contains public static method decorated with WebMethod and SciptMethod attributes
    Public class BasePage : Microsoft.SharePoint.Publishing.PublishingLayoutPage
            [WebMethod(EnableSession = true)]
            [ScriptMethod(ResponseFormat = ResponseFormat.Json, UseHttpGet = false)]
            public static string HelloWorld()
                return "Hello world is working!";
    Now I changed the <%Page ..> Tag of the PageLayout to inherit from the above class.
    There is a ScriptManager in the master page with EnablePageMethods = true
    I can see the Javascript methods are generated for HelloWorld(..) however the return result is "The Server Method HelloWorld failed." Error code is 500
    However the exact same code when I use with a application page (_layouts) and change the Page tag to inherit from the same base class above - it works OK.
    Both of them Page Layout and Application Page use the same master page - but one works and other does not.
    Additional Information:
    a) Am using Jquery and JqueryUI in the master page.
    b) Site use Publishing Template
    c) Variation is enabled on site
    d) Site has both Anonymous and Windows NT authentication
    The method Path for Application page shows as
    /_layouts/test.aspx/HelloWorld
    and for the page created using the Page layout is:
    /en-us/Company/Pages/Default.aspx/HelloWorld.
    Could anyone please advise what could be wrong where it does not work with Publishing Pages?
    Would please appreciate ideas / thoughts.
    Thanks,
    Mohan
    -- Mohan | My Blog

    Are you sure that you are getting HTTP 500 error ?. Usually HTTP 500 error denotes service unavailable at the server side or at the server end point. What is the exact fiddler trace you are getting ?
    If it is still HTTP 500, then one of the referenced components in the page layouts conflicts the ajax page methods call. Please let me know your findings
    Please mark the replies as answers if they help or unmark if not.

  • Need help. My wifi with comcast works on my PC, but not with apple,ipod touch or ipad air.

    My comcast wifi works with my PC but can not connect my ipod touch or the ipad air.  Pls. help.    Thanks.

    Do the iOS devices connect to other networks? If yes that tends to indicate a problem with your network.
    Do the iOS devices see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Script works in one frame, but not with frames before it

    Hi all-
    I'm a complete AS/Flash n00b, but hoping that I can get some guidance on this.
    I'm trying to test a very simple function for an e-learning module that is to train people on using 'quick keys' or key combinations on their keyboard. Basically, I want to show them a command and have them practice. In the practice, they will be asked to use a command and then have to do it on their keyboard.
    I used the code below successfully with one frame and a couple layers. I created a text-area ("traceArea), put it on the stage, set up the event and function... it works great! (although I'm sure the code isn't very pretty) When anything other than ctrl-p is pressed, it traces the "Try again!" message and when ctrl-p is pressed, "Great job!" pops up.
    stop();
    stage.addEventListener(KeyboardEvent.KEY_DOWN, detectKey);
    function detectKey(event:KeyboardEvent):void
    if (event.ctrlKey== true && event.keyCode==80 )
    traceArea.text = "Great job!";
    else
    traceArea.text = "Try again!";
    So, then I tried to build on to the file and added two frames before the previous AS code.
    Frame 1 - Intro
    A short introduction to the 'module' with a continue button. The code for this frame is:
    stop();
    continueBtn1.addEventListener(MouseEvent.MOUSE_UP,buttonPressed);
    function buttonPressed(event:MouseEvent)
    nextFrame();
    Frame 2 - Instructions
    This frame shows the viewer the correct keys to use to print (ctrl-p). There is another continue button here. Code:
    stop();
    continueBtn2.addEventListener(MouseEvent.MOUSE_UP,buttonPressed);
    The last frame is then the 'practice' (see first code above).
    When I run this file, there are no errors, but when it gets to that last frame, nothing is traced and there is no output on any keyboard command. I know the solution must be pretty easy, but I'm missing it and have no idea what it might be!
    Any help is appreciated. Thanks!
    -Andy

    use the trace function to debug your flash code:
    stop();
    stage.addEventListener(KeyboardEvent.KEY_DOWN, detectKey);
    function detectKey(event:KeyboardEvent):void
    trace(event);
    if (event.ctrlKey== true && event.keyCode==80 )
    traceArea.text = "Great job!";
    else
    traceArea.text = "Try again!";

  • 4g iPod works w/iTunes 5, but not with iTunes 2

    I have two G4s, one with OSX.2.8 and iTunes 5, the other has OS9.0.4 and iTunes 2.0.4. My iPod will mount and work with the G4 with iTunes 5, but I haven't been able to get it to mount on the G4 with iTunes 2. I've used the same firewire cable for both machines, and the firewire ports seem to be working on the G4 w/iTunes 2. My iPod software is up to date. I tried resetting the firewire ports, but the iPod still doesn't show up. Is iTunes 2.0.4 too outdated to work with an updated 4G iPod? Any ideas?
    Thanks,
    Gary

    I imagine that's the problem as well. What's the latest version of iTunes that is compatible with OS9? Is iTunes 2.0.4 it? My kids have a bunch of older games that they play on OS9 because the games freeze on OSX's classic environment, so I'm hesitant to move them over to X, but I bought my daughter an iPod mini for Christmas, and I want her to have her own iTunes library.

  • Applet works under 1.4, but not with 1.3

    i have a correct signed applet, which works with java 1.4.2 plug-in (means, the security dialog comes up, the user hits yes and the applet runs and can read/write files on local disk etc.)
    a fresh installation of win2k with java 1.3.1_11 does not accept the certification at all.
    it shows a FilePersmission while reading the .jar file itself.
    the jar is on the local hard disk and is being access via a local html file. (no webserver at all in the moment)
    is it possible that 1.3.1 does not check for certificates on local jar files or something?

    Try it with a webserver and see if it works. I am having a problem getting an applet to work locally under certain versions of the plugin.

  • Sites work using manual proxy but not with automatic detect

    I asked this in the ISA forum but they said since the WPAD file isn't generated by ISA to cross-post over here.
    We have an ISA 2006 build 5.0.5712 operating as our web proxy. We have WPAD configured both in DNS and in DHCP to point to this ISA server. There are two sites (rentsentinel.com and epmsonline.com) which when we use the 'Automatically detect settings' option
    in IE8, it either gives red X's in part of the homepage (rentsentinel), or doesn't show the page at all (epms). If we manually specify the proxy settings for this same server, it works fine. It would also appear that one can browse fine on random sites, but
    once we attempt to browse to one of these two sites,  that further browsing to other sites no longer works, even those we visited in the same browsing session.
    If I manually specify the http://wpad/wpad.dat file in the config field, no change in behavior. But if I use that same entry in Firefox, both websites render fine. Our wpad.dat is included below, with our internal domain
    name switched to domain.com.
    I'm looking for help on getting these sites working correctly with automatic detection. Thanks!
    //Copyright (c) 1997-2006 Microsoft Corporation
    BackupRoute="DIRECT";
    UseDirectForLocal=true;
    function MakeIPs(){
    this[0]="127.0.0.0";
    this[1]="255.0.0.0";
    this[2]="127.0.0.1";
    this[3]="255.255.255.255";
    this[4]="159.10.3.201";
    this[5]="255.255.255.255";
    this[6]="159.10.3.202";
    this[7]="255.255.255.254";
    this[8]="159.10.3.204";
    this[9]="255.255.255.252";
    this[10]="159.10.3.208";
    this[11]="255.255.255.254";
    this[12]="64.244.122.129";
    this[13]="255.255.255.255";
    this[14]="66.45.70.181";
    this[15]="255.255.255.255";
    this[16]="10.0.0.0";
    this[17]="255.0.0.0";
    this[18]="128.0.0.0";
    this[19]="192.0.0.0";
    this[20]="192.0.0.0";
    this[21]="224.0.0.0";
    this[22]="240.0.0.0";
    this[23]="248.0.0.0";
    this[24]="248.0.0.0";
    this[25]="252.0.0.0";
    this[26]="252.0.0.0";
    this[27]="254.0.0.0";
    this[28]="254.0.0.0";
    this[29]="255.0.0.0";
    this[30]="255.0.0.0";
    this[31]="255.128.0.0";
    this[32]="255.128.0.0";
    this[33]="255.192.0.0";
    this[34]="255.192.0.0";
    this[35]="255.224.0.0";
    this[36]="255.224.0.0";
    this[37]="255.240.0.0";
    this[38]="255.240.0.0";
    this[39]="255.248.0.0";
    this[40]="255.248.0.0";
    this[41]="255.252.0.0";
    this[42]="255.252.0.0";
    this[43]="255.254.0.0";
    this[44]="255.254.0.0";
    this[45]="255.255.0.0";
    this[46]="255.255.0.0";
    this[47]="255.255.128.0";
    this[48]="255.255.128.0";
    this[49]="255.255.192.0";
    this[50]="255.255.192.0";
    this[51]="255.255.224.0";
    this[52]="255.255.224.0";
    this[53]="255.255.240.0";
    this[54]="255.255.240.0";
    this[55]="255.255.248.0";
    this[56]="255.255.248.0";
    this[57]="255.255.252.0";
    this[58]="255.255.252.0";
    this[59]="255.255.254.0";
    this[60]="255.255.254.0";
    this[61]="255.255.255.0";
    this[62]="255.255.255.0";
    this[63]="255.255.255.128";
    this[64]="255.255.255.128";
    this[65]="255.255.255.192";
    this[66]="255.255.255.192";
    this[67]="255.255.255.224";
    this[68]="255.255.255.224";
    this[69]="255.255.255.240";
    this[70]="255.255.255.240";
    this[71]="255.255.255.248";
    this[72]="255.255.255.248";
    this[73]="255.255.255.252";
    this[74]="255.255.255.252";
    this[75]="255.255.255.254";
    this[76]="255.255.255.254";
    this[77]="255.255.255.255";
    DirectIPs=new MakeIPs();
    cDirectIPs=78;
    function MakeCARPExceptions(){
    CARPExceptions=new MakeCARPExceptions();
    cCARPExceptions=0;
    function MakeNames(){
    this[0]="gracehill.com";
    this[1]="*.cna.com";
    this[2]="*.itsolutions.com";
    this[3]="*.rentsentinel.com";
    this[4]="domain.com";
    DirectNames=new MakeNames();
    cDirectNames=5;
    HttpPort="8080";
    cNodes=1;
    function MakeProxies(){
    this[0]=new Node("hades-1.domain.com",0,1.000000);
    Proxies = new MakeProxies();
    function Node(name, hash, load){
    this.name = name;
    this.hash = hash;
    this.load = load;
    this.score = 0;
    return this;
    function FindProxyForURL(url, host){
    var hash=0, urllower, i, fIp=false, ip, nocarp=false, skiphost=false;
    var list="", pl, j, score, ibest, bestscore;
    urllower = url.toLowerCase();
    if((urllower.substring(0,5)=="rtsp:") ||
    (urllower.substring(0,6)=="rtspt:") ||
    (urllower.substring(0,6)=="rtspu:") ||
    (urllower.substring(0,4)=="mms:") ||
    (urllower.substring(0,5)=="mmst:") ||
    (urllower.substring(0,5)=="mmsu:"))
    return "DIRECT";
    if(UseDirectForLocal){
    if(isPlainHostName(host))
    fIp = true;}
    for(i=0; i<cDirectNames; i++){
    if(shExpMatch(host, DirectNames[i])){
    fIp = true;
    break;}
    if(shExpMatch(url, DirectNames[i]))
    return "DIRECT";
    if(cDirectIPs == 0){
    if(fIp)
    return "DIRECT";}
    else{
    ip = host;
    if(fIp)
    ip = dnsResolve(host);
    var isIpAddr = /^(\d+.){3}\d+$/;
    if(isIpAddr.test(ip)){
    for(i=0; i<cDirectIPs; i += 2){
    if(isInNet(ip, DirectIPs[i], DirectIPs[i+1]))
    return "DIRECT";}}
    else if(isPlainHostName(host))
    return "DIRECT";
    if(cCARPExceptions > 0){
    for(i = 0; i < cCARPExceptions; i++){
    if(shExpMatch(host, CARPExceptions[i])){
    nocarp = true;}
    if(shExpMatch(url, CARPExceptions[i])){
    nocarp = true;
    skiphost = true;
    break;
    if(!skiphost)
    hash = HashString(host,hash);
    if(nocarp)
    hash = HashString(myIpAddress(), hash);
    pl = new Array();
    for(i = 0; i<cNodes; i++){
    Proxies[i].score = Proxies[i].load * Scramble(hash ^ Proxies[i].hash);
    pl[i] = i;
    for(j = 0; j < cNodes; j++){
    bestscore = -1;
    for(i = 0; i < cNodes-j; i++){
    score = Proxies[pl[i]].score;
    if(score > bestscore){
    bestscore = score;
    ibest = i;
    list = list + "PROXY " + Proxies[pl[ibest]].name + ":" + HttpPort + "; ";
    pl[ibest] = pl[cNodes-j-1];
    list = list + BackupRoute;
    return list;
    var h_tbl = new Array(0,0x10D01913,0x21A03226,0x31702B35,0x4340644C,0x53907D5F,0x62E0566A,0x72304F79,0x8680C898,0x9650D18B,0xA720FABE,0xB7F0E3AD,0xC5C0ACD4,0xD510B5C7,0xE4609EF2,0xF4B087E1);
    function HashString(str, h){
    for(var i=0; i<str.length; i++){
    var c = str.charAt(i);
    if(c ==':' || c == '/') break;
    c = CharToAscii(c.toLowerCase());
    h = (h >>> 4) ^ h_tbl[(h ^ c) & 15];
    h = (h >>> 4) ^ h_tbl[(h ^ (c>>>4)) & 15];
    h = MakeInt(h);
    return h;
    function Scramble(h){
    h += ((h & 0xffff) * 0x1965) + ((((h >> 16) & 0xffff) * 0x1965) << 16) + (((h & 0xffff) * 0x6253) << 16);
    h = MakeInt(h);
    h += (((h & 0x7ff) << 21) | ((h >> 11) & 0x1fffff));
    return MakeInt(h);
    var Chars =" !\"#$%&\'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~€???????????Ž????????????ž? ¡¢£¤¥¦§¨©ª«¬­®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþ ";
    function CharToAscii(c){
    return Chars.indexOf(c) + 32;
    function MakeInt(x){
    x %= 4294967296;
    if(x < 0)
    x += 4294967296;
    return x;

    Hi,
    Sorry for the late response.
    Since the issue is complex and difficulty to troublshooting, we discussed for some time corssing the specialty. Here is some direction we may let you know to do further troubleshooting:
    capture network trace to confirm whats happening across the wire.
    confirm the wpad.dat is the expected.
    If you have any difficulty when doing this, we suggest you to contact with IT Pro Support via the link below:
    http://technet.microsoft.com/en-us/ms772425?WT.mc_id=SMCfoot_ENUS_TEXT
    I think it can help you define the root cause via some deeper tools due to the complicated symptom you have.
    I appreciate your understanding and time.
    Best Regards,
    Annie Gu

  • URGENT: Rest web service with get method works fine in browser but not with java client(Android)

    Hi ,
    I have created one REST web service which accepts two parameters send back JSON results.
    I tested the it in browser with URL as http://+Inteernal server+/ords/utimes/login_info?p1=+first_param+&p2=+second_para+
    Web service URL :  http://+Inteernal server+/ords/utimes/login_info?p1={p1}&p2={p2}
    But when java team wants to access it from java code it gives error as "400- Bad Request".
    one more IMP thing : when I test it in RESTful web service by using "set bind variable" , it only set value of first parameter.
    APEX version : 4.2
    Database : 11g (XE)
    ords : 2.0.8
    please help me ASAP.
    regards,
    Nagesh Patil

    Hi Pragya,
    thank you for the update.
    Another question: could you please give us any reference about these corrections you told about? Maybe they could be relevant in our case too.
    Our raised incident number is: 3100851983
    Kind regards,
    Davide

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • Site works in the app, but not in the browser.

    Hello iWeb experts,
    I've got problems.
    Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
    Two issues...
    FONTS
    I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
    FUNCTIONS
    Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
    • The type in one nav link appears smaller than all the rest.
    • Some links are active, others are not.
    • Rollover highlighting works on some links, but not others.
    • Most of the rollover links appear in the proper static color, a few do not.
    I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
    Any thoughts, suggestions on these two issues? Thanks much for any advice.
    John
    PS - For reference, see: www.johnrunk.com

    Fascinating, Kirk (+he types with one raised eyebrow+).
    QuickTimeKirk wrote:
    When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
    I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
    QuickTimeKirk wrote:
    Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
    This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
    Thanks, QTK. I truly appreciate your troubleshooting here.
    John

  • Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software.  Airplay logo never appears on iPhone or iPad.

    Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software.  Airplay logo never appears on iPhone or iPad.

    Try here  >  http://support.apple.com/kb/TS1538

  • HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

    How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
    Br
    Finn

    You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

  • LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

    LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

    Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

  • I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

    I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
    It works fine through my macbook, can't find anything in settings on iphone to resolve problem

    The headset has to have A2DP capability, which most (I believe) do not.
    http://en.wikipedia.org/wiki/Bluetooth_profile

Maybe you are looking for