2013 Backup and Restore

When I go to my backup and Restore and check the job status it tells me there is a backup in progress:
A backup or restore is currently in progress
How do I reset this as there is no backup that I have run for some time?

Hi,
According to your post, my understanding is that the job status still shown “A
backup or restore is currently in progress”.
Did you delete a old search application and recreate a new one before?
If so, maybe the old object is still existing in SQL, you can used the following stsadm command:
Stsadm -o deleteconfigurationobject -id “object GUID”
To find the object GUID, simply go into Central Admin - Manage Service Applications and highlight the offending legacy service application (Search Service
Application in the case). You should now be able to see the GUID in the IE address bar. Run the command above, and try your backups again and all should be well.
For more information:
http://imperfectit.blogspot.com/2010/06/sharepoint-2010-farm-backup-fails.html
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/0310b061-ea1c-4576-bb74-a02f5e04a3a0/backup-job-stuck-in-process-in-backup-and-restore-job-status?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Exchange Server 2013 backup and restoration question

Good afternoon
I am wondering if I can pick people's brains here if that's not too much trouble.
I have recently implemented an Exchange 2013 environment with 3 servers (two multi-role CAS & MBX physical machines, and one further virtual CAS server). Everything is working correctly and mail-flow is fine. My question relates to backup and restoration
procedures. I am running a single Database Availability group with the two multi-role servers members of the this group and I have one Mailbox Database on the DAG, passive on one member and active on the other. Failover has been tested and this is functioning
as expected.
The backup environment I have implemented is as follows. I have utilized a separate Microsoft DPM 2012 server that runs a nightly Bare Metal backup on both multi-role servers with a retention range of 14 days and I have protected the DAG using DPM with a
nightly full-express backup and 4 hourly syncs on one of the multi-role servers. Furthermore the Mailbox Database is protected, again nightly with a copy-backup.
I am confident I know what to do should the mailbox database become corrupted or lost or need to be restored for one reason or another (it would just be a case of restoring the backed up mailbox database using DPM to a pre-created recovery database), what
I am not quite so sure on is what I would do should I lose one or both of the multi-role CAS and MBX servers (the third CAS I am not so worried about as it is not used for incoming mail flow from the internet and we really only use it for ECP as we did not
want to expose this to the internet). I wonder what process should follow to restore my Exchange servers (I know how to perform the Bare Metal recoveries using WSB) and what configuration would be required after restoring the Bare Metal backups.
I know this is a reasonably long question but if anyone has any advice for me I would appreciate it greatly in the unlikely event something goes horribly wrong with my Exchange environment.
Thanks in advance

Hi,
Yes, Most of the configuration settings are stored in AD. Mail data and personal related data are store in Mailbox DB. We just need to take consideration of these two points.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Steps to take in case of any emergency... Project Server 2013 backup and restore

Hi There !
We have a Project Server 2013 environment which is scheduled for daily backup on a recovery server. Just wanted to know what will be steps that we should follow if we were to face a situation in which production is down and we have to look to recovery
server.
Your help is much appreciated !
Thanks

This will do the Project Sever 2013 rollover -
https://pwmather.wordpress.com/2013/05/02/projectserver-2013-environment-migration-rollover-steps-powershell-ps2013-msproject-sp2013/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Automate backup and restore

Hi All,
I want to automate backup and restore operation in T-sql script I need to give resource server,database and backup file location as input and then I need to restore that backup in differenet server so I want to give destination server as input too.
Could somebody help me on it.
Thanks

From Google :
http://www.sqlservercentral.com/blogs/powersql-by-prashanth-jayaram/2013/08/19/sqlcmd-database-backup-and-restore-automation-quickest-and-simplest-method/
http://social.technet.microsoft.com/wiki/contents/articles/23800.fully-automated-sql-server-restore-script.aspx
https://sqlwhisper.wordpress.com/2014/01/31/restore-script/
Hope it Helps!!

Restore Backup made with Backup and Restore W7 x64

Hi ....
Im really looking for some help here...
I had my laptop stolen and my now trying to recover a 2013 Backup Image made with a Windows tool called Backup and Restore.
The backup was made with a W7 SP1 64bit using Windows own Backup/Restore utility to create a system image on an external HDD connected by USB port.
The application saved the image into a folder called WindowsImageBackup. Inside this folders there are 2 *.VHD file
So as my laptop was Stolen, im trying to recover this old Backup and save my files again.
I would like to restore that previous Image. These are the steps I took:
1) Plugged in the HDD.
2) I went to Control Panel->Backup and Restore.
3) I selected 'Select another backup to restore files from'.
4) In the Restore Files (Advanced) dialogue, my backup isn't showing into the box, because its on my external drive, so i choose browse network location
5) I clicked 'browse network location' button, and it takes me to another restore files (advanced) dialogue that asks for network folder path. I tried to locate my external HD, without success. So i tried Search Network. As i also have a copy of my
backup on my NAS, i tried to inform the network IP path, but it didnt locate the backup either. I get the error that windows was not able to find any backup sets in that directory.
6) As the step 5 resulted in nothing, i tried the option: Recover system settings or Computer. And then Advanced recovery methods. And finally use previously system image to recover computer. And then Windows asks to reboot the computer and once rebooted
it starts on recovery mode where it cant find my backup image either.
So, how can i recover my backup?
I saw that the Backup created 2 VHD files and also tried to mount the VHD using Disk Management and attaching the VHD. The VHD mounted as drive and i could finally see my files, but most of them are corrupted. So i dont know if im doing something wrong when
attaching the VHD.
Can anyone help me please? I dont know what else to try.
Thanks a lot
Flavio.

Hi,
If you mean that you want to restore an system image in a different computer, then I have to say that it will not work.
Please see the statement in KB 249694,
we do not support restoring a system state backup from one computer to a second computer of a different make, model, or hardware configuration.
http://support.microsoft.com/kb/249694/en-us
How to restore a Windows installation or move it to different hardware
Yolanda Zhu
TechNet Community Support

I have an iPhone 4, and I DESPISE iOS 7. I'm only 13, so too anxious to backup and restore for fear of losing apps and music. Any solutions on how to get back there without backup and restore? I'm desperate.

I have an iPhone 4. I DESPISE iOS 7, I'm only 13 so
I'm too nervous to backup and restore my phone for
Fear of losing apps, music, notes, etc..
Is there anyone out there who can help me get back
With iOS 6 without the backup and restore? I'm desperate.

Here are few tips to speed up your phone http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
battery issues look here http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Also you can try settings - general - reset - reset network settings.

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

HT1766 Now, I understand how the backup and restore the backup functions. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already the

Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.

When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.

Windows 8 full system backup and restore to new laptop (system with 32GB mSata Cache)?

Hi, I have a new Envy DV7-7205 which has 2TB storage with 32GB HDD Cache (or mSata, not really sure how it's implemented). I need to return the laptop as it's faulty but I would like to startup on the replacement exactly where I left off.
Are there any special methods required to backup and restore the system image from the old laptop to the new one, particularly with consideration to the 32GB SSD cache, as this doesn;t seem to appear as a distinct "drive" on the system.
Please can anybody advise the simplest, safest method to move my entire system from old to the new laptops (should be exactly the same spec machine).
Many thanks,
Greg
HP Envy DV7-7205tx, 2x1TB HDD, 32GB mSata Cache, Windows 8 Pro

Hi,
Firstly I don't know how this is going to work on new machine because the Windows 8 lisence would NOT work at all.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I backup and restore my itunes media using a hard drive?

Can I backup and restore files if I used a hard drive?
I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
Thanks!

The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
RealDave

How to backup and restore working Mac OS 9 computer ?

I have a working G4 running OS 9.0, and I would like to backup and restore that hard disk to a second G4 computer that is OS 9 bootable.
I have a CD backup taken by Toast v4, of the entire disk, but I do not know how to restore the contents to the second computer. My previous attempt hosed the hard disk inside the second computer.
I'm thinking I can boot up the second computer via cd-rom or external hard disk, but I'm not sure I can copy the contents from the cd-rom correctly. In particular, I'm guessing the boot sector is challenging to restore.
I probably have some old OS 9 cd-roms around here, if I need to go that route.
I've thought about removing the working hard disk, and using dd on a linux machine to make a clone of the drive. I'd prefer not to go that route, as I don't want to touch working hardware.
I've also thought about hooking up a portable USB disk drive to my working OS 9 machine, and doing some sort of cloning. I'm not sure what program I would need to do that, and whether it's part of the OS 9 suite of tools, or a 3rd party tool. I used to own some various disk tools, but it's been so long I'm not sure I can find the cd's.
So if anybody can point to some instructions on the net for me to follow, or have any suggestions, I'm all ears.
Thanks
mark

If the second computer originally shipped supporting a newer OS 9.x
system than the first 9.0, the other computer's OS9 version probably
won't work since it would be too old. In the case of drag and drop,
you can get away with a lot more than what an installer package may
allow, since the installer's software can be avoided with Pacifist. So
another computer's OS9.2.2 basic system could be used as a boot
volume even if it is sparse and not the fully complemented OS 9.2.2
that a full retail build would install from a rich full retail install disc.
Usually the retail path was an OS 9.2.1 retail and the update to 9.2.2;
but machines requiring OS 9.2.2 won't like a 9.2.1. Sometimes, since
a drag and drop is not driven by installer software, you can use older.
But machine specific bits, some critical for graphic card drivers & etc,
would be likely missing unless the software used offered that support.
If you can find one of these, it may work = note, out of stock:
691-3638-A Apple G3/G4 9.2.2 (CD) System Software
{This is a Mac OS 9.2.2 full installation CD, color Grey.}
These do not come in retail packaging.
http://www.welovemacs.com/6913638a.html
Have fun, even if it isn't exactly as planned.
Good luck & happy computing!
{ edited }

I lost my music after backup and restore. can i get it back

is it possible to get my music back after a backup and restore ? i lost all my music.

Is all your music in iTunes on your computer? If so with your device plugged in make sure the sync music box is checked.

Has anyone sucessfully used the new Winclone 3.2 to backup and restore Bootcamp partittion with Windows 7 Ultimate on MBP with Lion 10.7.3?

Bought late 2011 MBP 17" with Bootcamp partition (Windows 7 Ultimate) and Lion OS 10.7.3
I am trying to make a backup of Bootcamp partition before I start using my laptop but it proves to be a difficult task.
I don’t have any installation disk for Windows 7 and I am afraid that, if a disaster strikes and I loose the HDD, my copy of Windows will be gone.
The only way to restore Windows partition according to what I read so far is to do the following:
• Use Windows to backup data from BootCamp Partition
• Reinstall OS Lion formatting full hard drive in the process
• Use BootCamp Assistant to create BootCamp partition
• Install Windows 7 on bootcamp partion
• Use Windows 7 to restore data from backup file created in the first step
The only problem is that I don't any image or disk to re-install Windows 7. With Windows 7 I can create only 'repair disk' (for what it is worth) or system image but according to other users it would format the whole drive including OS Lion partition when reinstalling
Winclone 3.2 seems like the answer to my prayers but would like to hear from the users if it worked for them (most imprtantly, did the restore work?).

Got the response from Winclone regarding my confusion in step 18 of the procedure to create bootcamp backup. The message displayed on the screenshot under step 18 can be ignored. It refers to creating a Windows partition using Boot Camp Assistant but in fact this partition has already been created in earlier steps using Disk Utility.
I bought Winclone 3.3 as it promises to make backup and restore of Bootcamp partition with Windows 7 on it really easy, the steps to do this task are easy and well documented, and the owner of the program was very prompt responding to my queries.
I performed the following as an insurance against disaster prior to creating Winclone image:
Since my Windows 7 came pre-installed but without any installation disk I used Windows 7 to create 'Windows 7 system image' . From what I read on forums the system image created using Windows 7 apparently can't be used to easily restore Boot Camp partition (as it wipes out OS X in the process). I created this image as a last resort backup rescue - some users reported that it can be used to recover Windows but the process is painful and involve a number of steps, swapping hard drives, and paid software to assist in the process. I did not bother to make notes on this process - thanks to Winclone I am not suppose to need this backup if everything works as promised
I also created 'Windows 7 repair disk' prior to running Winclone. Not sure what the value of it will be but again, this is something I did just in case I need it in the future
Then I installed Winclone 3.3 and created Windows 7 Ultimate Boot Camp image without any problems (on MBP running Lion 10.7.4). My Winclone image file of 150GB Windows 7 Boot Camp partition prior to installing any programs and without any data on it ended up being nearly 8GB (saved to the external USB HDD).
I have not restored and don't plan to restore the Winclone 3.3 image just to test if it works (don't want to risk loosing my perfectly well running Windows 7 in case of any disaster). So ultimately only time or experience of other users will tell me if I spent my money well buying Winclone 3.3. I know it worked for you JBLTZ so hopefully it will work for me when I need it one day.
Cheers
Swavek

2013 Backup and Restore

Similar Messages

Maybe you are looking for