2013 MacBook Pro 15 retina display with broken screen

My girlfriend broke my screen on my 15 inch Macbook pro 2013. will the warranty cover the replacement of the screeN. How much will it cost to replace screen

No, the Apple warranty for Macs does not cover accidental damage.

Similar Messages

  • 2012 macbook pro retina display artifacts on screen when using onboard video

    2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
    About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
    On top of that issue I also have had the ghosting issue.
    Anyone else have this problem?

    artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
    There are a few retina owners who have faulty gpus.

  • MacBook Pro Retina display with scratch/crack in the glass

    Hi,
    Can it be real, that on my new MacBook Pro Retina display I have a little scratch/crack in the glass out of the box?
    You can only see it if you have light (e.g withe) background on the display.
    I hope Apple Care will replace it.
    Does anybody else have the same issue?
    Regards,
    JO

    When I bought my iMac and took it home and set it up, I was cleaning the screen and noticed what looked like smears on the inside of the glass. I took a picture of it with my iphone and went back to the apple store. Of course the genuis could not see it in the brightly lit store, so I showed her the picture. I also took a little flash light with me and she was then able to see the marks. She thought they looked like fingerprints under the glass. They swapped out the iMac right there for a new one.

  • Installing Windows XP on Macbook Pro 17 inch with broken screen...

    My Macbook Pro 17 inch's (2.16 ghz, 2006) screen is broken, and displays only the top 1/4 accurately, with the lower 3/4 a series of lines, etc...
    Up until recently, the screen would work after a period of time so long as I did not move it. However, now, it is a complete loss, as mentioned above.
    My problem is that I cannot install Windows XP using bootcamp because I cannot see what on earth I am doing! And the last thing I want to do is accidently format my OS X partition while blindly fumbling around in the Windows XP boot screen.
    I was able to install (obviously) Leopard by closing the laptop screen immediately after startup, forcing the computer to use my external monitor. This, however, does not work once the computer begins the windows installer, it simply reverts back to the laptop screen.
    Any advice would be of great help! I have searched forum after forum, but have found no one with a similar problem.
    Thank you!
    p.s.- you'd think a $3200 laptop would last a little longer. So far I have replaced the HD twice, as well as the left internal cooling fan...

    My Macbook Pro 17 inch's (2.16 ghz, 2006) screen is broken, and displays only the top 1/4 accurately, with the lower 3/4 a series of lines, etc...
    Up until recently, the screen would work after a period of time so long as I did not move it. However, now, it is a complete loss, as mentioned above.
    My problem is that I cannot install Windows XP using bootcamp because I cannot see what on earth I am doing! And the last thing I want to do is accidently format my OS X partition while blindly fumbling around in the Windows XP boot screen.
    I was able to install (obviously) Leopard by closing the laptop screen immediately after startup, forcing the computer to use my external monitor. This, however, does not work once the computer begins the windows installer, it simply reverts back to the laptop screen.
    Any advice would be of great help! I have searched forum after forum, but have found no one with a similar problem.
    Thank you!
    p.s.- you'd think a $3200 laptop would last a little longer. So far I have replaced the HD twice, as well as the left internal cooling fan...

  • MacBook Pro Retina Display - Keyboard Marking Screen

    Hello,
    The keyboard on my new MacBook Pro with Retina Display is leaving marks on the screen.  They wash off with a damp soft cloth.  Any suggestions to stop the problem.
    Thanks
    Joe

    In my opinion this is a defect in your MacBook Pro.  The tolerances are extremely tight.  The keys should not come into contact with your screen whatsoever.   I would call Apple tech support to see if it warrants a replacement if you want.  I even had a retina MacBook Pro for a couple weeks (before I returned it because of image retention issue in LG display) and there was never any key marks on the screen.  If you have a Samsung display though I would be hesitant asking for a replacement.

  • Where can I buy a Macbook pro retina display with english keyboard in bangkok

    Hi,
    I am currently in Bangkok right now. I wanted to buy the new Macbook Pro with retina display. I went to Power Buy in Central world and found out that the keyboard for the macs have thai characters as well as English ones. I wanted to buy a mac with plain English keyboard. The guy in the store said that is only possible if I buy online.
    Is there anywhere or any store in Bangkok where I could get the new macbook pro with an english keyboard? Thanks.

    Since nobody in this forum represents Apple or any store, you will probably get better info on this by directly contacting stores yourself.

  • MacBook Pro Retina Display Issue (snowy screen)

    I have noticed when my mid 2012 MBP Retina comes out of sleep, it sometimes goes to a snowy (like TV static) screen for like 1/2 a second before the login screen shows up. So far I've only noticed it with the Intel 4000 card, and not the nVidia GeForce 650M, but I have not done enough testing to be certain. I started noticing this issue in beta 5 or 6 of Yosemite, and it continues to be a problem after the final release.

    Okay I ran the MacBook exclusively on the nVidia video for 2 days and did not notice the issue once. Today I switched back to the Intel card and it did it first time it came out of sleep. Now I am wondering if it's hardware or driver issue. That is the only video issue I notice.

  • (URGENT: ANY HELP APPRECIATED!) 15" macbook pro retina display with trackpad having erratic movements (version 10.9.2)

    Had this problem 2 days ago since I bought it. At first the trackpad just froze. Now it's having very erratic movements that even closes tabs on browsers etc.
    Tried installing EFI update 1.2 and 1.3 but it says "This software is not supported on  your system." (My software version is OS X Mavericks 10.9.2, mid 2012)
    I have also tried the quick method of pressing the top corners of the trackpad & it only helps with the clicking but not the movement of the cursor. Apparently using external mouse instead of the trackpad works fine, but most of the time, even the mouse cursor becomes very erratic.
    Please, anyone experienced the same thing & managed to solve it?
    Feeling desperate and annoyed.

    Look for possible solutions here:
    http://support.apple.com/kb/ts1449
    In addition a thorough cleaning of the trackpad will sometimes restore functionality.
    Ciao.

  • Cost on replacing the NVidia GT 650m on a Early 2013 Macbook Pro Retina Display 15 in

    My graphics card died and its only 1.5 years old. I even spent the extra money to completely spec it out and it still crapped out on me. What monetary damage am I looking at? I have a Genius Bar appt on Sunday, but I want to have my bank account ready. My computer is a necessary tool at college for me.

    You should have a backup in the first place. If you don't, buy an external drive (they're inexpensive these days) and make a Time Machine or a clone backup (using Carbon Copy Cloner).
    Then take your machine to your local Apple Store or an AASP and let them diagnose the computer. See if they can isolate what may possibly be making the 'clicking' sound.
    Clinton

  • Late 2013 Macbook Pro Retina 15" screen brightness is dull?

    I winder if someone can help me with a issue regarding my machine.
    I have recently had my early 2013 Macbook Pro retina replaced with the late 2013 model and found that the screen brightness  at maximum is (or appears) to be somewhat less?
    Can any anyone help?
    Regards

    The low-end 15” rMBP with a 8 GB or RAM and a 256 GB SSD costs $2,000. 
    The low-end 15” rMBP with a 8 GB or RAM and a 512 GB SSD costs $2,300. 
    With 16 GB of RAM and a 512 GB SSD it costs $2,500.
    The high-end 15” rMBP with a 16 GB of RAM and a 512 GB SSD costs $2,600.
    All cost $500 dollars more with a 1 TB SSD.
    So the SSD size is not a differentiating factor unless you prefer 256 GB.
    If you think you need 16 GB of RAM and a 512 GB SSD then you might as well spend the extra $100 for the high-end model.
    The high-end model will make a difference on gaming and graphics-oriented applications.
    They tend to run other applications at about the same speed.
    Both models are rated with 8 hours of battery life.
    Benchmarks on PhotoShop comparing memory sizes:  https://discussions.apple.com/thread/5659174?tstart=30
    The speed was about 10% different between 8 GB and 16 GB models.
    On other applications your mileage may vary.
    Application benchmarks:
    http://www.macworld.com/article/2059215/15-inch-retina-macbook-pro-review-a-tale -of-two-laptops.html
    The low-end and high-end performed the about the same on non-graphics oriented applications.
    Graphics oriented benchmarks:
    On the Cinebench OpenGL benchmark the high-end was about twice as fast.
    On the Unigine Heaven Benchmark benchmark they ran at about the same speed.
    On the Unigine Valley Benchmark benchmark the high-end was about 1.5x as fast.
    Message was edited by: hands4

  • Macbook pro retina display 15 inch ram upgrade with apple care

    hi,
    I have a early 2013 Macbook Pro Retina Display 15 inch.
    Doing some research, i do realized that RAMs are not upgradeable due to being embedded to motherboard.
    I was hoping if there any chance to upgrade my RAM from 8 gb to 16 gb through Apple Care that i currently have.
    I would love to hear back any feed backs on any possible way to upgrade your RAMS in MPR 15 inch.
    thank you much!!!

    thumbmania,
    It's impossible for anyone - Apple included - to upgrade the RAM on a Retina MacBook Pro. With those machines, you have to live with what you originally purchased.
    Sorry,
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Can i buy a macbook pro retina display in US with portuguese keyboard?

    Can Apple or someone else tell me if is possible to buy in Apple Retail Store in U.S. a Macbook Pro retina Display  with portuguese keyboard?

    It's difficult to get one at a shop or Apple Online Store because build-to-order Macs aren't available at them unless they are very popular.
    The only option you have is to call Apple (1-800-MY-APPLE) and see if you can order a MacBook Pro with a Portuguese keyboard. In case you can, this will take days because it has to be ordered and delivered to the USAFD

  • When I turn on my Macbook pro retina display i get a black screen and i noticed that the machine gets very hot, any clue how to make it work?

    When I turn on my Macbook pro retina display, a black screen show up while I hear the normal start up sound.  I noticed that the machine gets very hot, any clue how to make it work?

    If the Mac is too hot to touch, take it in for service.
    Apple - Find Locations

  • Portuguese Keyboard on Macbook pro retina display.

    Dear All.
    Is there a possibility to buy a macbook pro retina display with portuguese keyboard in Apple Store in the U.S.A.?
    Regards.
    Emilio Silva

    Hey, I have the same problem too. It is making me angry. Both my thunderbolt outputs work, but the hdmi freezes both screens. I then have to shut the computer off by holding the power button and re-boot. Have you found a solution? I NEED my hdmi port. Please get back to me. Thanks!

  • Macbook Pro Retina Display Disk is locked

    Hi,
    I have a macbook pro retina display with mountain lion 10.8.1.
    Today I shutdown my machine and now when I try to turn it on it goes to a progress bar and spinning and it just turns off itself. I have tried recovery mode and it turns out the disk needs repair and after repair it says it can't be repaired and it should be reformat again. I've tried safe mode but it keeps doing the progress bar and spinning and it turns off again.
    I don't know what happened to the machine it was on my desk all the time and it has flash storage so no failing in hard disk and bad sector.
    What should I do? (I don't have a external hard drive with GUID to install ML on it and see if I can open my Macintosh HD. And I don't have a Time Machine backup).

    Do you have any backups? If the answer is no, you've quite possibly lost all your data.

Maybe you are looking for

  • How can I get the selected rows from two ALV grids at the same time?

    I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes). The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from

  • Purchase Order Header Status report

    Hi All, Just wondering in which table /report I could get the values of "STATUS" tab in PO header which has information about Ordered,Delivered,Still to deli.,Invoiced,Downpayments.. Does anyone know from wher i can get this information for list of P

  • Lacp port channel shows down on one 5k

    I got one side of my lacp port channel down. the topology is shown but the left side is showing down 20    Po20(SD)    Eth      LACP      Eth1/5(s)    Eth1/6(s)  # sh int port-channel 20 port-channel20 is down (No operational members)   Hardware: Por

  • Leading zeroo in front of kunnr number from kna1 after selecting from kna1

    hi i and selecting kunnr from kna1 table which is char 10 i want to place leading zeros in front of customer number after selection from the table pls suggest the way to do so also let me know the funtion module to remove leading zeros regards Arora

  • Communication channels path For testing ?

    For testing communication channels one path is there what is that path ? There all adapters are there based on our adapter type we can click that adaper and check weather our communication channel is correct or not? i need that path.