2014 Video cards known to WORK with XPS 8300 (stock)

I have the XFX R7 250E (downgrading to a decent single slot card) and only get the black screen and no boot-up so I was encouraged to see it worked for someone. I was also guilty of not uninstalling previous AMD drivers so I used the thorough Toms hardware guide to do so and tried it again. Again, no joy. Then I pulled a couple installed PCIe boards out (more "stock") but nothing helped . I have the same system as the original poster with the A06 bios. Apparently what I lack is some magic dust. Extremely frustrating. I'll be trying out the Visiontek HD 7750 (at $50 more!) next as it's supposed to work at least according to Dell.....

I got the Visiontek HD 7750 through Newegg (saved a few bucks) and it did not work. Same product number, 900549, as what's listed on the Dell site for the 8300. Maybe the Dell versions have a different bios on them to force compatibility. Never wanted to even change my card, just trying to get at the PCIe slot covered over by the double-wide 5770.....aargh!

Similar Messages

Inexpensive video caputure cards known to work with G5

I am looking for an inexpensive video capture card to put in my G5 that I can use to capture streams from old vhs and dvds. I don't need anything fancy. I can edit them with other programs.
If you have used a card and/or it is known to work with mac osx / g5, can you please post the name, model number, and your comments on performance.

Hi jon_jon;
Well your price limit has eliminated everything I have been able to find up till now so I guess I stop searching.
Allan
If you are interested in donating your spare CPU cycles to science, please try
http://teammacosx.homeunix.com/index.html

Is there a updated list of video card/adapters that work with FMLE

I am looking to buy a video card or adapter that work with FMLE. I am trying to live stream to ustream. I am looking for a video card preferibably with composite input.

http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf

Video Cards that will work with AE CC

I need a card to work with my AE CC on the road..(LAP TOP) for video editing and AE production of changes.I understand the list provided by adobe is a partial list I would like some other choices
Thanks Dave
[email protected]

If you're using AE CC, there is no need to use the ray-traced renderer. It has now become obsolete with the arrival of faster-rendering, more powerful solution that comes FREE! Check out the details of CINEMA 4D integration with After Effects CC (12.0)
The card list on the Adobe page is for cards that are certified to accelerate rendering of the ray-traced renderer. Otherwise AE uses the GPU for very little. Read more on the GPU (CUDA, OpenGL) features in After Effects CS6 here. Now, some third-party effects (like Element 3d or Red Giant Universe) make use of the GPU, but their requirements are very different and they could use a much broader range of cards. If you plan to use any of them, you'd need to consult their requirements.

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

Fast ATA cards can't work with a B&W?

My computer was running very well with 4 drives hooked up to a Tempo 100 card until I put those pieces in an 8600. I have been trying to use SATA drives, and ATA drives larger than 120 Gigs with numerous cards, but nothing works with OS9; a 250 Gig SATA drive seems to work in OSX whether it is hooked up to a Firmtek card, or a Macsense ATA/SATA combo card. I have hooked up 2 new 160 Gig drives (Seagate, Hitachi) to the Macsense card and a Siig ATA raid card and the computer freezes before anything appears on the desktop, and nothing is on the menu bar. Each drive was intialized after switching cards.PRAM, and the Cuda chip have been reset. no other cards are in PCI slots except the video card. This has been stumping me for over a month.

The computer with a problem is a B&W G3 that has a 500MHz G4, and 1meg of RAM. It also has a ATI Radeon 7000, and is running OS 9.2.1 with no other software installed. It did have a Aurora Fuse PCI card in it, but it is out now.
The computer was very stable when it had 4 drives hooked up to a Sonnet Tempo 100 card. I wanted larger, faster drives. I have tried 3 PCI cards in it and have trouble with all three. The cards are:
the first SATA card from Firmtek;
a card from MacSense that has 2 SATA channels,and 1 channel ATA;
the ATA 133/100 RAID card from Siig that is set to non-RAID operation.
I have 2 SATA drives, 160 Gig and 250 Gig, and 2 ATA drives, both 160 Gigs that I have used with the cards.
Using any combination to boot from OS 9.2.1 results in a freeze right before the icons are placed on the desktop. No text is in the menu bar as well. The drives in all cases have been initialized before OS installation. TechTool 3 reports problems with files, and the drives failing the "seek", "zero unit", and "self diagnosis".
A SATA drive with OSX, and other programs seemed ok; It would boot with no problem, and the other software was useable, but last night it wouldn't boot.
CUDA and PRAM have been reset many times.

Do SD card readers not work with 10.3?

I have an old G4 Power mac, and my kids have iMac G5s. We all run 10.3.9, and have SD card readers, and none of them work at all. Does Apple acknowledge that SD cards do not work with Macs, and/or was this fixed in 10.4? We are looking to replace our computers, and this is a deal breaker.

Okay, I did a little more research, and here's what I have found.
(Yes, I'm talking about a USB card reader.)
On my ancient G4 Mac, the 2GB card never mounts. I can see it with Disk Utility, but Disk Utility usually offers to format it. When I do this, it attempts to format it as a 1GB card, and fails.
However, I found an old 16MB card, and it mounts every time.
My kids both have a reader and a 2GB card for their iMacs. They usually mount okay, but not always. Sometimes it takes a restart.
The 2GB cards are all a funky off-brand, "Adata." The 16MB card is a Canon.
Now I am wondering if it's the cheap cards, or the capacity of the cards. I remember reading at one time that some Macs don't want to see removable drives over 1GB. This may be the problem with my computer. I just ordered a 1GB PQI card, we'll see how that does when it arrives.
My mac has both USB 1.1 and 2.0 slots. Same results on either bus.

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Small CF card reader that works with the iPad Camera Kit?

I'm looking for a small (not much bigger than a CF card) CF Card reader that works with the iPad Camera kit (USB piece) - Anyone know of one?
All the ones I see people suggesting are big and bulky (made for a desktop). I know there are many smaller ones, but that the iPad camera kit doesn't work with everyone. Anyone know one that works with it?

My set up, quite compact for travel, this is a no brand version but I have seen other ones branded Integra or something similar.
http://farm5.static.flickr.com/4029/4713475185b52dae86bdb.jpg

Does Sonnet Express Card 34 eSata Work with Lion?

I am looking to see if the Sonnet Express Card 34 eSata works with Lion OS

If your card is listed on the product site from Sonnet (e.g: http://www.sonnettech.com/product/tempo_sata_express34.html), you could get the answer by looking at the "Technical Specifications". Be sure that you're looking at the specifications of the correct card, since some seem to be compatible and some are not. Furthermore, if your card is based on the Silicon Image Sil3132 chip, it's (today) not supported. If there are any doubts left, try to connect Sonnet directly...

Need a sound card that will work with my speak

i have the creative Digatal 5700 speakers and i need a card that will work with them using the digital DIN input. also dont have alot of money,and would like with the control panel on the front of the pc like the fatalty.

The <A href="
http://us.creative.com/products/product.asp?category=&subcategory=205&product=907"]Audigy 2 ZS Platinum[/url] should be able to fit your need.
Jason

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

i lost my Mac OSX dvd...

Video & Voice Chat Not Working With ichat

Voice Chat and Video Chat is not working with ichat 6 in booth google and yahoo. One side is ichat and the other side is yahoo & google talk clients, Please confirm whether its a workable scenario or it only supports ichat to ichat.
Thanks & Regards
Sreejith R

Hi
Other alternatives based on the amount of info in your post.
Has she set up her Google Name in iChat or is she logged on via the Web Site (Google Mail page) ?
iChat cannot Video to the Google Mail Login page chat option or to the app called GoogleTalk on a PC.
Another thing.
If you login to the GoogleMail Web pages you will get logged out of iChat (GoogleTalk account) to a partial extent which may explain the loss of Video or Audio iCons.
iChat reports in a Text chat window that you have Logged Off.
However you seem to be able to continue the chat - but it separate from the web Page chat - You send from the web page and that chat will get the next response, send from iChat and it gets the next response (I can't remember if the Buddy told me he got two Chat windows at his end)
9:26 PM Wednesday; May 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Which Sony Video Camera's will work with Final Cut

Hi,
I'm getting *Final Cut* and can get +Sony Video Camera's+ at a discount, but like to know which +Sony Video Camera's+ will work with *Final Cut* or should most work without any problems?
Thanks,
Sal

You got to do better than that.
Any idea on the TYPE of sony video camera's available to you? They make quite a few.
I'd stay away from anything with a DVD in it... also HDV can be tricky too... but not undoable.
What are you looking for?
CaptM

Anyone know of any greeting card program that works with OS x?

anyone know of any greeting card program that works with OS X?

There is no solution. The Canon UFR2 driver used by the MF series does not work when connected to a Windows share or a wireless print server, including the Airport Extreme or Express. The problem is wholly to do with the way in which Canon has written this driver and therefore the Canon support staff should know this and tell you (although their Mac knowledge in Australia is pitiful and most likely the same in your region).
If you had a model with Ethernet, then you could connect it to the wireless router and print via IP > LPD. But I know that your MF4150 only has USB as I mate of mine had one and he had exactly the same issue on Tiger, which I documented on the Tiger forum and the Airport printing forum.
So, don't waste your money on a print server. Get rid of the Canon and get something that will work for all your OS's. If I can suggest, the safest purchase would be to get a model that supports Postscript. While this does cost more, it will help to avoid any limitations that can occur when using a vendors proprietary printer language, like Canon's UFR2.
Pahu

2014 Video cards known to WORK with XPS 8300 (stock)

Similar Messages

Maybe you are looking for