2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment. In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

Similar Messages

HP Beats Audio EQ not working after Windows 10 update

Hi, I have an Envy 17t-j000 Quad Edition with Beats. After the Windows 10 upgrade, I have noticed that the Beats Audio EQ is not working. The left panel is working fine, but the right panel with the red sliders is not working. I move the sliders up and down, but nothing happens. Can you please help me fix this?

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

Audio devices not working when upgraded to windows 7

Dear Community members and Lenovo...
After uggrading my Lenovo N100 0768 54A from Windows Vista Home premium to Windows 7 Home premium, As some of our friends put up here, audio is not functioning. The mixer shows balancing in sound, the device driver shows, working, but the audio problem is still not resolved even after 3 weeks. I am really fedup with the audio driver installation over three weeks. The drivers tried, are both from lenovo site and realtek site. Still I could not solve the problem.
When upgarded from Win-XP to Windows Vista, realtek was not functioning, through our forum some of our friends suggested to install soundmax driver which was working well then. Now, Audio is the only problem. could Lenovo solve my problem. Some more community members could please help me out.
thanking you,
sakthivelu V M
Chennai - India

Hi:
While trying to help you, I was looking along the same lines as you were (I assume).
I did a search by the IDT 92HD73E audio codec and all I could find were drivers for system boards with Intel processors such as the driver you tried unsuccessfully.
I have finally found a W8.1 driver for that codec from a desktop PC with an AMD processor and chipset.
See if this one works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134120-1&cc=us&dlc=en&lc=en...

Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

I have installed the latest HP Support Assistant for windows 10 and I have installed the updates Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings I have checked the box of "Allow the screen to auto-rotate" In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424) In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them In User Account I have created a new user with password. Auto-rotate did not work in that user But all these have not worked. Please find a solution for me. About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work

Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

Audio Button Not Working after Reinstall of Windows 7 HP DM4

Hey guys i have a HP DM4-1275CA and i decided to reinstall windows (upgraded to Ultimate for school to debloat the computer too) and formatted my HDD (i kept stock recovery incase of emergency ..) and now that i reinstalled it I've installed all the drivers and the button that used to turn white on my laptop only gives me the LED when its off , so when it works there is no led when i shut off audio it shows me the orange LED. I am trying to get the White LED which lets me know audio is on .. how would i go about this? I've tried installing the drivers from HP Website, I've installed both Audio drivers, I've installed the Intel Graphics HD drivers and still nothing! i am getting very frustrated with this .. any help would be appreciated

Hi:
I'm thinking you need this software...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-91100-1&cc=us&dlc=en&lc=en&...=
Paul

Beats audio is not working

I updated the operating system to Windows 8.1 and at now Beats Audio is not working. What should i do? My notebook is HP Envy 6-1101er.

i may be able to help you if you give me your laptops full name and product number

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

No no dear this is not my problem
My problem that i mean i say when i on my
Cellural data my gprs not working and not work my internet

Beats audio controls not working

Using my beats headphones this morning with my MacBook Air and iTunes. Everything is up to date. Although today now the audio controls on the cord won't work. Normally I can pause iTunes or control the volume. I do this multiple times a day but no go today.
Is this another 10.10.2 bug? Illustrator 2014 CC no longer works properly with my external monitor. I'm getting frustrated with all these bugs.
Also, in my 'About This Mac' info window, it shows my OS as "135122" instead of "Mac OS X" - I'm sure that's not normal.
Any thoughts, anyone?

I did a reboot and repaired permissions, which solved the beats headphones controls not working.
Still concerned about the Mac OS version display though. Curious to know if anyone else has that as well.

Beats audio program not work

hi i have a HP Pavilion dv6-6c20ed Entertainment Notebook it a very nice thing but i have a question
the beat program dos not work i have a beats headset but if i want to trun the bass to high its not work
can you please help me?

Hi,
Try using Recovery Manager to reinstall your original IDT HD Audio driver ( this will also reinstall the Beats gui ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv6 beats audio softwarr not working :{

ello govnor!
when i got my hp i was messing around with the beats volume and listening experience thing to personlize my sound and if i rememeber right it closed on me? now when i want to change it it wont even let me use that part of it and when i turn the volume up the beats symbol is replaced with a speaker symbol.. this isnt that big of a deal. but i make my own dubstep and i wana make sure im getting full quality of sound from this hp, considering thats why i bought it. any help or sugestions or if you dont understand just askk thanks!

And if this helps it doesnt show up by where the batery life is and wifi conection and volume bar is any more where it used to be. and when i bring it up and when i mess with the advanced settings of the beats aduio pannel it says IDT PC audio has stopped working... any help thanks!

Troubleshooting Guide: Audio does not Work after a Certain Period of Time

Hello everyone, Thanks for choosing the HP Forums! If your sound recently stopped working on Windows 8.x or Windows Server 2012, and you suspect a Windows Update is involved, then look no further! This is the troubleshooting guide that will explain how to resolve the issue! Explanation: Currently, there is a Windows update that may be causing the sound on your computer to stop working. The update is KB2962407, and it is now an “Important” update. That means that it will be installed by Windows Update unless you hide it. This thread also covers generic sound troubleshooting that can resolve "no sound" issues. Before tackling the update itself, since a Windows update may not be the culprit, there is some troubleshooting that can be done. A Round of Troubleshooting: 1. Running the Audio Troubleshooting in Windows 8 can resolve the issue. It does contain the ability to eliminate any setting that affects sound. Here are some steps on how to run this troubleshooter: a) Hold down the “Windows” and “R” key and then type “troubleshooting” and hit Enter.b) A window will open. On the left, click “View All”, then “Playing Audio”.c) Click “Advanced” and run it as Administrator. Then click “Next” to complete the process. 2. Try creating a new user account. The changes forced by the update may only affect one user. This HP document shows you how to create a new user under the “Creating a new account in Windows 8” section: Managing User Accounts and Logins (Windows 8) 3. Try a pair of headphones or external speakers. It will rule out where the issue lies if sound does not work through a second or third output device. 4. Another solution is to uninstall the driver manually then force it to be installed again:a) Open Device Manager, and go to the “Sound, video and game controller” section.b) Right-click on your audio driver and select “uninstall”.c) Restart the computer. This will force the hardware to write a new driver upon startup. 5. Finally, make sure that the remaining steps that you haven't tried from this document are attempted: No Sound from Speakers (Windows 8) New Inclusions: Disabling and enabling the sound driver has been tested with successful results enough for me to post here. These are the instructions to do this: a) Open Device Manager, and go to the “Sound, video and game controller” section.b) Right-click on your audio driver and select “disable”.c) Wait a minute, then right-click on it and select "enable" Also, A System Restore is also a valid troubleshooting step. This will return the computer to a point before the update and/or external source of the issue occurred. Here is a document on how to perform a System Restore: System Restore If you want something stronger, a Windows Refresh completely refreshes Windows 8, without affecting files: Refresh Your PC to Resolve Problems (Windows 8) Also, here is a Windows sound troubleshooting tutorial. Just out of curiosity, I re-created the issue on a Windows 8 computer and went through this tutorial. It was able to resolve the issue: No sound in Windows *Everything in italics is currently un-tested, but will be tested as soon as possible. I believe these steps will help: In the search bar, type "services.msc" and hit Enter. Hold down the "Windows" key and "R" key. Type "services.msc" and hit Enter. Look for the following services: - Audio Service- Windows Audio- Windows Audio Endpoint Builder I want you to right-click each of those services, and select "Stop". When they are all stopped, right-click on each one again, and select "Start". As well, make sure each service's status is "Started" and their startup type is "Automatic". Troubleshooting the Update: At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407. Please note that the following troubleshooting is ONLY a workaround, for now, and only should be done if the computer has installed this update. First, you can try the Hotfix in this Microsoft document, specifically to address KB2962407: Windows RT, Windows 8, and Windows Server 2012 update rollup: June 2014 If that doesn't help, then uninstalling the Windows Update, and then hiding it, is the only method of eliminating the issue if it caused by this update. Here is the procedure for uninstalling the update: 1. Go into Control Panel, then click on “Programs and Features”.2. Click on “View Installed Updates”. Look for the update with the ID number KB2962407.3. Right-click on the update and select “Uninstall”. Restart the computer. Next, here is the procedure for hiding the update: 1. Go into Control Panel, then click on “Windows Updates”.2. Click on “Check for Updates”. When the process is completed, is should find important update(s) available. Clicking on the message will open a window where the important update(s) is.3. Right-click on the KB2962407 update and select “Hide Update”. This will prevent the update from being installed next time Windows Updates are being installed. Conclusion:
At the end of this guide, you will have sound working again (assuming that the cause was the Windows Update, or at least software-based). Please let me know if you have any other questions or concerns. Thanks!
Mario

Hello everyone Thank you so much for making use of my thread, dedicated to resolve the issue. I appreciate all the feedback For those who are still experiencing issues, please reply to this post with the following information, and I can continue to assist: 1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number 2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system. (Make sure to include whether it's 32 or 64 bit.) 3. Does this occur on certain programs, or all programs? 4. Have you installed any new software or drivers on this computer, before the issue appeared? 5. What steps have been attempted from my first post on this thread, and what were the results? Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore Thanks again for all the continued support! Mario

Doly Audio driver cannot start after upgrading to Windows 8.1

Upgrade to Windows 8.1 went flawlessly, but when I restart I get this message:
I can't find any reference to Dolby Theater or Audio in any app or Device management.
I can't find any drivers for Windows 8 64 bit on the Lenovo site either.
Can anyone help with this?
Solved!
Go to Solution.

There is a possible solution in the following thread;
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/m-p/126...
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Dolby Audio driver cannot start after upgrading to Windows 8.1

Hello.
Windows 8 was the worst thing that happened to Windows, but since I bought this G505s laptop with Win8 pre-installed, i had no other choice to go to. Few days after the purchase, Windows 8.1 arrived and I updated 8 to 8.1 hoping to see some improvements. But to my sadness, 8.1 has ruined my expectations, and Lenovo didn't even care to address the user issues in 8.1
Here are my Issues :
OneKey Recovery : Updated to 8.xx.xx.xxxx
The OneKey Recovery app tells that 'Current system cannot create a backup'
I can't have a secure laptop without it creating the Recovery !!
Lenovo, please address this issue and fix the OneKey Recovery Problem !!
Dolby audio app : Doesn't open, and if once it starts, cannot configure the Equalizer !
--- Dr Saketh ---

hi sotim01,
Thanks for posting!
1. Uninstall all components,
Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
4. Download this Driver for installation
Conexant Audio Driver
Install it and continue
5. Open Drive C: now and you should have the Drivers folder back.
Open that, Open Connexant Open Dolby Gui, then you should have Dolbyaa for Advanced audio.
Restart your PC and there you go!
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

Similar Messages

Maybe you are looking for