2015 VCDX Workshop Dates

Folks,
Below is the current list of dates that we would like to hold the 4-hour VCDX Workshop class.  These do Coincide with the local VMUG's and are the day BEFORE in the afternoon so that people don't end up losing the day of the VMUG for the 4-hour session.  We are in the process of working to find speakers for these.  In the event we cannot get a speaker we will update the posting to reflect the status of the event.  You will be able to register for these events via the VMUG registration system for that event.  The dates listed are the day before, with the exception of Toronto which is the same day due to the short timeline.  These will be the only dates we can support in 2015.
These dates represent approximately double the sessions held in 2014, and are officially presented and supported by VMware VCDX Employees.  At this time these are the ONLY dates we are able to support at this time based on speaker availability and budget constraints.  There is already an online version of the bootcamp series and we are working to get an updated recording from PEX2015 posted soon.  Other dates may follow and the post will be updated if they do.
NOTE:  The enrollment for the workshop is PART of the UserCon Registration.  There is a single field that is NOT a required field.  Image is attached, Don't Miss it!
ABSTRACT:
VMware Certified Design Experts are an elite group of architects leading virtualization implementations around the world. Certification is achieved through the Design Defense where all candidates must submit and successfully defend a production-ready VMware Solution before a panel of veteran VCDX-holders. This highly interactive session is a complete and engaging deep dive into the VCDX Process providing tips and success strategies for: solution design selection and development; the VCDX application and supporting documentation; creation and delivery of the design overview; the VCDX design scenario; and the VCDX troubleshooting scenario.  If you are pursuing the VCDX credential, the VCDX Workshop is the perfect start to your journey.
Location
Date
Status
Location
Speaker
TORONTO
2/26/15
CONFIRMED
METRO TORONTO CONV. CNTR.
Eiad Al-Aqqad
SILICON VALLEY
4/13/15
CONFIRMED - Register
SAN JOSE CONVENTION CENTER
Potheri Mohan and Mostafa Khalil
SOUTH FLORIDA
4/15/15
CONFIRMED - Register
PALM BEACH CONVENTION CNTR.
Chris Colotti
WISCONSIN
4/27/15
CONFIRMED - Register
MARRIOTT MADISON WEST
Chris Colotti (Also doing Keynote at UserCon)
PHILADELPHIA
5/11/15
CONFIRMED - Register
VALLEY FORGE CASINO RESORT
Niran Even Chen
CHARLOTTE
6/3/15
CONFIRMED - Register
CHARLOTTE CONVENTION CENTER
Chris Colotti
KANSAS CITY
6/15/15
CONFIRMED - register
OVERLAND PARK CONV. CNTR.
Joe Silvagi
BOSTON
6/17/15
CONFIRMED - Regiser
BCEC
Chris Colotti
INDIANAPOLIS
7/22/15
CONFIRMED
INDIANAPOLIS CONV. CNTR.
Chris Colotti
CHICAGO
9/22/15
CONFIRMED
STEPHENS CONVENTION CENTER
Joe Silvagi
ATLANTA
9/23/15
CONFIRMED
GEORGIA WORLD CONGRESS CNTR.
Chris Colotti
DALLAS
9/28/15
CONFIRMED
IRVING CONVENTION CENTER
Jason Shiplett
NETHERLANDS
3/18/15
CONFIRMED - Register
Van Der Valk Hotel, De Holle Bilt 1
Martijn Baecke
VMWorld US
TENTATIVE
TBD
TBD
VMWorld EMEA
TENTATIVE
TBD
TBD
Q1 Online Workshop
3/13/15
CONFIRMED- Register
Online 2-hours via Webex
Chris Colotti and Joe Silvagi

Chris,
As one of the South Florida VMUG leaders I think this is a great idea, however this is the 1st I have heard of this. I have not been able to find any registration links so please forward me whatever you have for the April 15th date and I will start promoting this.
[email protected]

Similar Messages

  • March 13th VCDX Workshop Webinar Recording!

    Q1 Online VCDX Workshop - Americas-20150313 1405-1
    Friday, March 13, 2015
    10:05 am  |  Eastern Daylight Time (New York, GMT-04:00)
    Play recording (1 hr 58 min 2 sec)
    Slides from this presentation are attached to this post as a PDF but will change often and be updated as we do more of these.

  • BD/ctor-ArgumentError: Error #2015:Invalid Bitmap Data

    When upload to the server the following error occurs: BD/ctor-ArgumentError: Error #2015:Invalid Bitmap Data or Muse freezes.

    Hello,
    On the weekend, I tried to upload my website again. I got an interesting error message.
    Error: Error #1000: The system is out of memory.
                at flash.data::SQLStatement/internalExecute()
                at flash.data::SQLStatement/execute()
                at Function/http://adobe.com/AS3/2006/builtin::apply()
                at com.adobe.muse.framework.database::RecordManager$/retryOnSQL3119Errors()
                at com.adobe.muse.framework.database::RecordManager$/getRecordFromTable()
                at com.adobe.muse.framework.database::RecordManager/getRecord()
                at com.adobe.muse.framework.objectModel::DataBase/getDBRecord()
                at com.adobe.muse.framework.objectModel::DataBase/instantiate()
                at com.adobe.muse.framework.objectModel::PersistContext/instantiate()
                at com.adobe.muse.framework.objectModel::PersistList/getItemAt()
                at mx.collections::ListCollectionView/getItemAt()
                at mx.collections::ListCollectionView/http://www.adobe.com/2006/actionscript/flash/proxy::nextValue()
                at com.adobe.muse.site.links::BaseLink/getProxy()
                at com.adobe.muse.site.links::BaseLink/hasLinkProxy()
                at com.adobe.muse.site.links::BaseLink/isMediaLink()
                at com.adobe.muse.site.links::BaseLink/needMoreImageData()
                at com.adobe.muse.site.links::LinkUtils$/getUnexpectedLinkStatuses()
                at com.adobe.muse.importExport::ExportUtil$/preflightLinksInActiveDoc()
                at com.adobe.muse.importExport.html.ui::MuseExportMenuRegion/onChildItemClick()
                at com.adobe.muse.framework.menus::MuseMenuRegionBase/onChildItemClickEvent()
                at flash.events::EventDispatcher/dispatchEventFunction()
                at flash.events::EventDispatcher/dispatchEvent()
                at com.adobe.muse.framework.menus::MuseMenuItemBase/onClick()
                at flash.events::EventDispatcher/dispatchEventFunction()
                at flash.events::EventDispatcher/dispatchEvent()
                at com.adobe.muse.framework.menus::MuseMenuManager/onMenuItemSelect()
                at flash.events::EventDispatcher/dispatchEventFunction()
                at flash.events::EventDispatcher/dispatchEvent()
                at com.adobe.pash.air::AIRMenuManager/onClickMenuItem()
    There is also the latest MuseLog.txt.
    Von: Zak Williamson (Adobe) [email protected]
    Gesendet: Freitag, 21. Juni 2013 19:58
    An: Mondputzer
    Betreff: BD/ctor-ArgumentError: Error #2015:Invalid Bitmap Data
    Re: BD/ctor-ArgumentError: Error #2015:Invalid Bitmap Data
    created by  <http://forums.adobe.com/people/ZakWilliamson%28Adobe%29> Zak Williamson (Adobe) in Help with using Adobe Muse CC -  <http://forums.adobe.com/message/5436292#5436292> View the full discussion

  • SQL workshop Data Model

    It seems like the data model in sql workshop (where is shows a diagram of linked tables) is very useful.
    Has anyone built anything like this in their application or is there an example out there somewhere of how it was done in the sql workshop.
    Something like this would be very useful in an application that I'm building but I'm not too sure where to start.
    Thanks!
    - Brian

    There are a ton of things in the SQL Workshop that I would love to get the "source code" behind but I am sure Oracle is not about to divulge all these intellectual property anytime soon.
    Login to my apex.oracle.com workspace at vikasa/guest/guest and review the SQL Workshop application. The page that shows the model is 2103 and 2152. It just has a PL/SQL region with an API call to draw the model diagram
    wwv_flow_table_drill.draw_data_model (
        p_owner      =>:OBJECT_OWNER,
        p_table_name =>:OBJECT_NAME,
        p_session    =>:SESSION,
        p_page       =>2103,
        p_request    =>'GETOBJECT',
        p_clear_cache=>'RP',
        p_item_oid   =>'OB_OBJECT_ID'
    );:-(

  • CC geeft aan Lightroom CC(2015) up to date maar het programma wil niet opstarten.

    Ik heb via de Cloud Lightroom CC(2015) gedownload en geïnstalleerd, en de Cloud geeft aan dat het downloaden en installeren up to date is maar ik krijg Lightroom niet opgestart.
    Ik heb het al 3x verwijdert en wederom geïnstalleerd maar niets helpt. Wat moet ik doen????????
    Jan Steketee.

    Hartelijk dank voor uw hulp, na het insturen van mijn probleem ben ik zelf ook nog verder aan het zoeken geweest en vond de oplossing bij Adobe.
    Ik moest mij eerst afmelden bij CC en daarna opnieuw inloggen met mijn Adobe id. en wachtwoord. Na het opnieuw inloggen werden mijn CC programma's opnieuw geladen en startte Lightroom CC direct op.
    nogmaals hartelijk dank voor uw aangeboden hulp.
    met vriendelijke groet,
    Jan Steketee.

  • AII 4.0 - workshops - date?

    Hi,
    anyone knows when will AII 4.0 workshops
    be available?
    on the service.sap.com/rkt I can only see AII 2.1
    workshops and 4.0 are -> (in prep.)
    maybe someone knows something more ?
    Regards,
    michal

    Hello Michael,
    first materials for SAP AII 4.0 are available in the Learning Map for application/process consultants. Please check again. Within the next weeks we will update the RKT pages for SAP AII 4.0. Be so kind and come back from time to time and check for an update.
    Additionally information for Sales and Solution Engineers is provided and free of charge.
    Workshops will be delivered next year. You will find workshop information on the rkt pages within the next weeks as well.
    Best regards,
    Simone

  • Create a record based on From date and To Date in CRM 2015 Plugins

    Hi all
    in my account screen i have two date field from date and Todate and i have one child entity member when i am creating a
    new account then based on from date and to date number of child record should be created
    for example in account screen
    if from date=2/1/2015 and 
       To date=31/03/2015
    then number of child record should be created
    in this manner 
    from date      to date 
    2/1/2015       31/01/2015
    01/02/2015     28/02/2015
    1/03/2015      31/03/2015

    Hi,
    OK. It seems you want to create 3 records (custom child entity) where the first has the same From Date as the Account and goes up to the end of the month, and the other records go from there.
    This logic can be implemented via a Plugin that could run on the create and update of these fields on Accounts. From the Plugin, you can set up the logic and fill the records with the necessary information.

  • Posting date in AFRU and 2lis_04_p_arbpl data source is not matching

    Hi Experts,
    We are facing an issue with 2LIS_04_P_ARBPL data source, posting date in AFRU table and in data source is not matching.
    For example: we booked an activity confirmation of value 100 on 01.01.2015 posting date, Counter 1, Operation 10
    For the same operation another counter is confirmed on 01.02.2015 posting date.
    So, in AFRU table:
    Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
    1001               10               8001                             1              01.01.2015       100
    1001               10               8001                             2              01.02.2015       0
    In 2lis_04_p_arbpl data source, counter field is missing due to which only 1 record is coming which is:
    Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
    1001               10               8001                             1              01.02.2015       100
    In data source, activity of value 100 is coming on 01.02.2015 date instead in AFRU table it is booked on 01.01.2015 posting date by which we are unable to match the value in query which is based on posting date.
    Please help on this.
    Thanks,
    Sameer

    Hi Sameer,
    Please check on which date the production order has status as "completed".
    It could be on 01.02.2015.
    Thanks,
    Vimal

  • Flex 2 and Actionscript 3  Workshop in LA

    It's a late notice, but important to any Flash professional
    out there. I just want everyone to know about this rare
    opportunity. Fly out to LA if you have to!
    Flex Builder 2 & Action Script 3 Training Workshop
    Date: Thu, Fri, & Sat, May 11,12, & 13 (9a-5p, ~20
    classroom hours)
    Location: Venice, California 90291
    Instructor: Zach Stepek
    Price: $690
    Description: Flex expert and Stateline (Illinois) Macromedia
    User Group Manager Zach Stepek will lead an in-depth three-day
    workshop on the new generation of Flex -- the first tool for the
    Flash Platform that utilizes the awesome processing power of AS3!
    --

    Might be an idea to post this in the Flex2 or AS3 forums
    where people who
    are interested in these can read it.
    "JonJonMenendez" <[email protected]> wrote
    in message
    news:e3ouru$fm1$[email protected]..
    > It's a late notice, but important to any Flash
    professional out there. I
    > just
    > want everyone to know about this rare opportunity. Fly
    out to LA if you
    > have to!
    > Flex Builder 2 & Action Script 3 Training Workshop
    > Date: Thu, Fri, & Sat, May 11,12, & 13 (9a-5p,
    ~20 classroom hours)
    > Location: Venice, California 90291
    > Instructor: Zach Stepek
    > Price: $690
    > Description: Flex expert and Stateline (Illinois)
    Macromedia User Group
    > Manager Zach Stepek will lead an in-depth three-day
    workshop on the new
    > generation of Flex -- the first tool for the Flash
    Platform that utilizes
    > the
    > awesome processing power of AS3! --
    >

  • Copy and Paste in an Application (like sql-workshop)

    Hey,
    i would like to implement a functionality to copy & paste (similar to sql workshop) data from an excell sheet into a formular.
    by submitting this formular i want to create a set of data after the 'tab' dividing.
    its not comma seperated. because its coming from an excelll-sheet.
    Does anybody know a solution
    PS: Or how i read an array to the tab sign and put this string in a select statement.
    greets phil
    Message was edited by:
    user557004

    Hi,
    How about the issue now, is it solved?
    This issue might be caused by her user profile. What the result would be if using another user account to log on her computer to test this issue.
    Also do you have the same problem when you open excel in Safe Mode?
    Try opening Excel without any Add-ins or hidden workbooks:
    Press and hold the CTRL key, and then click the excel program.
    Best Regards,
    Wind

  • Need to find rows with overlapping dates

    I have a table that has FirstName, LastName, EnrollmentFrom and EnrollmentTo
    I need to find all names where they have overlapping dates.  For example this is invalid:
    Name       EnrollmentFrom     EnrollmentTo
    John Doe   1/1/2014              1/1/2015
    John Doe   2/5/2014              2/5/2014
    This would be valid:
    John Doe   1/1/2014              1/1/2015
    John Doe   1/2/2015              1/1/2016
    This is just an example as the dates could be anything in one of the other enrollments.
    Any help is greatly appreciated.

    Here is what I have based on the last post but it also returns ones that are valid:
    SELECT ffev.PatientLastName, ffev.PatientFirstName, ffev.EnrollmentFrom, ffev.EnrollmentTo
    FROM PAPPortal..FeedFileEnrollmentValues ffev
    OUTER APPLY (select top 1 b.* from PAPPortal..FeedFileEnrollmentValues b where ffev.PatientID = b.PatientID and b.EnrollmentFrom < ffev.EnrollmentTo and b.EnrollmentTo > ffev.EnrollmentFrom and ffev.PatientID <> b.PatientID) overlap
    WHERE ffev.EnrollmentTo IS NOT NULL
    GROUP BY ffev.PatientLastName, ffev.PatientFirstName, ffev.EnrollmentFrom, ffev.EnrollmentTo
    ORDER BY ffev.PatientLastName, ffev.PatientFirstName, ffev.EnrollmentFrom, ffev.EnrollmentTo
    Name              EnrollmentFrom         EnrollmentTo
    John Doe            2013-02-08            2014-02-07
    John Doe            2014-08-15            2015-08-15
    hi
    it seems you have given (= and <>) which is always return false(no records)
     where ffev.PatientID = b.PatientID and b.EnrollmentFrom < ffev.EnrollmentTo and b.EnrollmentTo > ffev.EnrollmentFrom and
           ffev.PatientID <> b.PatientID
    Note : i have given
    where a.ID=b.ID and b.DateFrom<a.DateTo and b.DateTo>a.DateFrom and
    a.rno<>b.rno
    If you don't have any unique column to differentiate you  can create rno with CTE and use like below
    DECLARE @Data AS TABLE
    -- rno int identity(1,1),
    ID int,
    DateFrom datetime,
    DateTo datetime
    INSERT INTO @Data VALUES (1, '1/1/2014', '1/1/2015')
    INSERT INTO @Data VALUES (1, '2/5/2014', '2/5/2014')
    INSERT INTO @Data VALUES (2, '1/1/2014', '12/31/2014')
    INSERT INTO @Data VALUES (2, '1/2/2015', '12/31/2016')
    ;WITH CTE1 as
    SELECT ROW_NUMBER() over(PARTITION by ID order by DateFrom,DateTo ) rno,* FROM @Data
    SELECT a.*, overlap.rno,overlap.DateFrom,overlap.DateTo
    FROM CTE1 a
    OUTER APPLY (select top 1 b.* from CTE1 b where a.ID=b.ID
    and b.DateFrom<a.DateTo
    and b.DateTo>a.DateFrom and a.rno<>b.rno) overlapwhere overlap.ID is not null
    Thanks
    Saravana Kumar C

  • Show user entered date when ssrs report exported to csv format

    Hi All,
    How can I show date range parameter entered by user when ssrs report is exported to csv format.
    my csv output should look like this....
    Date : 01/01/2015 TO 01/31/2015 (user selected dates)
    ID,EmpFirstName,EmpLastName,Location
    1,Tom,Garry,NY
    2,John,Graham,NJ
    3,Ron,Lorrie,CA
    Thanks,
    RH
    sql

    Hi RH,
    You can add two textbox at the top outside the tablix and using expression to get the parameter value use have selected to display in the textbox as blew:
    TextBox1: =Parameters!Date.Value
    TextBox2: =Parameters!To.Value
    For Multiple value parameter you can use the expression like : =Join(Parameters!Date.Value,",")
    You can rename the two textbox' name in the properties as "Date" and "To"  then the two textboxs will display like belkow in the CSV report:
    Date                 TO
    01/01/2015      01/31/2015 
    ID   EmpFirstName    EmpLastName   Location
    1      Tom                  Garry                  NY
    2      John                 Graham               NJ
    3      Ron                   Lorrie                 CA
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • MAC Quicken 2015 vs. Quicken 2007...

    MAC QUICKEN 2015, will it bring in ...
    Just bought MAC QUICKEN 2015 and transferred data from MAC QUICKEN 2007. Half the good eliminates from 2007 are either gone, or did not transfer. This, after the website says it is quick and easy to get your data files from the MAC 2007 software.
    The following operating functions are missing from the automatic data migration or just are gone!  Is this what Intuit charges $200 to recover???
    Scheduled transactions …[yes] [no]
    User defined reports that can be kept …[yes] [no]
    Transfers between registers …[yes] [no]
    Setup local sales tax percentage option …[yes] [no]
    Bulk online account updates, not just one account at a time …[yes] [no]
    Define the number of backups to keep …[yes] [no]
    USER Defined MENU BAR Options:
        QuickFill button in Menu Bar…[yes] [no]
        VOID button in Menu Bar…[yes] [no]
        Memorize transactions button in Menu Bar…[yes] [no]
        User defined reports …[yes] [no]
        Quick Reports button in Menu Bar, not the same as above …[yes] [no]

    In the past Intuit just insulted Mac users, now they have committed a class action against them, with the misleading name of their update of Quicken Essentials to "Quicken 2015 for Mac!"
    Thank you for itemizing the missing features, so that we can link interested users over to your post.
    I just continue to use Quicken 2007; would this work for you?

  • Problem loading variables and controls in Workshop 8.1 (Beta) Palettes

    Hi All,
    I am getting problem in loading variables and control in the Workshop Data and
    Control Palette at times when I open the application. The Workshop interface shows
    the variable at times and does not show up at all on another instance. Let me
    know if anybody else has faced a similar problem or not

    Akshay,
    Please post this question in the Workshop 8.1 Beta Newsgroup.
    weblogic.developer.interest.81beta.workshop
    Thanks
    Raj Alagumalai
    WebLogic Workshop Support
    "Akshay Aggarwal" <[email protected]> wrote in message
    news:3e9107da$[email protected]..
    >
    Hi All,
    I am getting problem in loading variables and control in the Workshop Dataand
    Control Palette at times when I open the application. The Workshopinterface shows
    the variable at times and does not show up at all on another instance. Letme
    know if anybody else has faced a similar problem or not

  • Delivery date in PR is showing different value compared to sales order date

    Team,
    Req. date in sales order is 14.04.2015 i run MRP and planned order is created on 14.04.2015 but for PR the delivery date is 01.06.2014.. planned delivery time is 24 days and GR processing is 2 days total 26 days..so the delivery date should be 10/05/2015..
    may i know why is it happening
    thanks,

    Hi Vijesh,
    The reason lies with lot sizing procedure.
    In Monthly lot size, the delivery date is period start date (Standard). Check SPRO tcode OMI4
    Lets consider the original sceanrio, with the delivery time of 24 days and GR days as 2, the availabity date should come as 20.05.2015 (consider only working days). This would have happened if you had EX as lot size. (where requirement date is delivery date)
    In your case the lot size was MB (Monthly), where "period start date is delivery date". Now with the period of 1 month, the possible start dates are 01.05.2015 and 01.06.2015.
    with 26 days as total lead time of procurement, system can not propose 01.05.2015 as availability date (because material will be available on 20.05.2015) and hence it shows 01.06.2015 as next availability date. (due to montly bucket)
    Regards,
    Rohit

Maybe you are looking for