2032 http error with hostname in the url in the Android alone

I get 2032 error , when I send a http request to the server.I get the error only in the android phone that too when I append the url with the hostname.
If the send the request with the Ip address, it works fine in the android, but with the host name I get the error.
Can you help me with the error

I've called the big guys to help you. Good luck.
Is the problem there if you log in as "just a user" ?

Similar Messages

Made an error while changing the URL of the feed. Feed now unavailable

Heya all
I have a Podcast which is as well in the iTunes Store. When I upgraded my software the URL for the link changed. Easy, just put a redirect there and ping the feed so iTunes can update it. Worked as it should. There is only one problem - I put a wrong new URL into the redirect: I forgot to add a / after the domain name. Now I can not correct it as the new URL is a corrupt one and can't be reached at all.
iTunes Link: http://itunes.apple.com/ch/podcast/predigtcast-des-heilsarmee/id348536381
Podcast ID: 348536381
corrupt Podcast URL:
http://predigten.homeip.netindex.php?option=com_sermonspeaker&view=feed&feed=RSS 2.0&tmpl=component
correct Podcast URL would be:
http://predigten.homeip.net/index.php?option=com_sermonspeaker&view=feed&feed=RS S2.0&tmpl=component
As you can see the URL is missing the '/' between 'predigten.homeip.net' and 'index.php...'
Is there anything that can be done? Would be a pity to resubmit the feed and loose the subscribers.
Greetings
Thomas

You could try contacting iTunes Support and explaining the situation, and ask them if they can redirect iTunes to the correct URL. I have to say that I don't think it's terribly likely they will do this - on the whole they tend to respond with form answers or send people back to this forum - but you can't lose anything by asking: I'm afraid it's your only option other than starting again from scratch. (If you do manage to get them to do this please do let us know for future reference - this problem arises from time to time.)
iTunes support, for problems with podcasts, is at
http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.

HT3275 Can some HELP, I keep getting this error with my Time Machine Back up, "The backup disk image "/Volumes/JKPN Safe/JKPN IMAC.sparsebundle" is already in use.

Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

Ie 11 fails with 'IE Security detected that the URL and the configuration link to not match

HI,
I Have a user that is using IE 11 and is getting the following error:
IE Security detected that the URL and the configuration link to not match. Please use the URL as configured. Is and IP based URL. On IE 10 we get a similar message, but as soon as we add it to our trusted site and switch to compatibility
mode the issue goes away.
For example http://10.10.10.180/xxx/iafwebsite_810/
What would be causing this issue?
Any help would be appreciated.
Thanks,
Trish
Trish Leppa

Hi,
It seems that this URL doesn't meet security level. Thus, as long as you add this URL to Trusted sites zone, this issue is fixed.
Thanks!
Andy Altmann
TechNet Community Support

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

Way the url of the images are absolute in km?

Hi!
I am having some trouble with the url's of the images that I insert in a html page on KM. Specifically, when I insert a new image, the URL of it is absolute!!
I mean:
http://<host>:<port>/irj/go/km/docs/documents/imagename.gif
I edited the url and remove the http://<host>:<port> so I get the relative url
/irj/go/km/docs/documents/imagename.gif
but when I save the settings, the system insert the hostname and port.....making the url absolute again!!
Is this a bug or I making a mistake?
The real problem arises when I transport the KM Content (using ICE), becouse after the transport, the url of the image in the new system keep being absolute... and keep referencing to the original hostname and port!!!
could anybody give me a tip or some advice???
thanks in advace!!!
best regards
Marcelo
pd: I am working on EP 7 SP 11

Hi Marcelo,
This is strange. We always insert links to images like "/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/images/test.gif", and it works ok in all environments. This link dynamically adds the <host>:<port> from the environment where it is being accessed from.
Are you seeing the <host>:<port> when you look at the source code of the page after it has been rendered?
Regards,
Harman

Wsit: Modify the URL of the security token service at runtime

I've managed to modify the url of my webservice endpoint at runtime used by a client application with the BindingProvider.ENDPOINT_ADDRESS_PROPERTY. Is it also possible to modify the url of the security token service?

Check this article
http://blogs.technet.com/b/sykhad-msft/archive/2012/02/25/sharepoint-2010-nailing-the-error-quot-the-security-token-service-is-unavailable-quot.aspx
and similar thread
https://social.technet.microsoft.com/Forums/office/en-US/78cd4366-b11b-4300-93a4-4135d55f561f/error-8306-an-exception-occurred-when-trying-to-issue-security-token-please-help?forum=sharepointgeneralprevious
though it is SharePoint 2010 but will work similar in sps 2013 also

Firefox opens when I click on a hyperlink in an e-mail in my Outlook 2003 program, but does not go to the URL in the link. It used to work before I re-installed my MS XP Pro 64 bit OS. Help!

At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
See the uploaded screen print(JPEG) below.
UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

I'd like to save the URLs of the group of pages tabbed in one particular FF window to be reloaded en masse when I use FF again some time in the future

I have a lot of browser tabs currently and I will not have finished using them by the time I next reboot, shutting down Firefox. On the other hand there are too many to fit neatly in one FF window so I've opened a 2nd window and moved a bunch over. Now I want to know how I can make sure FF will remember all the tab URLs when I start it again - and how I can be sure it will load them up in separate windows as presently. Because I have a feeling it will just dump them all in the one window. But there's too many to make that useful! On Opera you can save a 'session' with a particular selection of tabbed URLs, under a particular name, and then reload that session later. You can even start up several past sessions as separate windows at the same time. In that way you can select which groups of previous tabs you want to recall when. I'd like that in Firefox but I can't see anything to create it. :) What will happen for instance when I close the two current windows before rebooting? I suspect I will lose the record of the URLs in the window that is closed first, and only those of the 2nd to be recalled will come back when re-starting it. Basically there needs to be a "Save Group of Tabs" option on the File menu near "Save Page As...". On the other hand maybe this facility already exists and I just don't know how to find it?

Take a look at [https://addons.mozilla.org/en-US/firefox/search/?q=Session&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced= these extensions at AMO] for those features.

How do I find out the URL of the page a document was downloaded from?

I downloaded a PDF several months ago; I can see it in my downloads history. When I right click it there, I see the link to the PDF itself, but I need to know the actual page it came from.
I've checked my History, but cannot identify the page.
Is there a definitive way of determining the URL of the page that linked to the document?

Open the Download Manager window and select that file.
Copy and paste this code in the Code field in the Error Console and click the Evaluate button.
*Firefox/Tools > Web Development > Error Console
The code adds a tooltip to the area with the file type icon at the left hand side of each entry in the DM window and shows a tooltip when you hover that area.<br />
It only works for entries that are currently visible in the DM and not for new entries that are added by downloading files and only as long as the DM window is kept open, so you need to rerun the code in the Error Console to get a tooltip.
<pre><nowiki>const Cc=Components.classes, Ci=Components.interfaces;
var enumerator=Cc["@mozilla.org/appshell/window-mediator;1"].getService(Ci.nsIWindowMediator).getEnumerator(null);
while(enumerator.hasMoreElements()){var win=enumerator.getNext();
if(win.location=="chrome://mozapps/content/downloads/downloads.xul"){
var i,r,R,C='';
r=win.document.getElementById("downloadView").getElementsByTagName("richlistitem");
for(i=0;R=r[i];i++){
var fP=R.getAttribute("path");
var fU=R.getAttribute("uri");
var sT=parseInt(R.getAttribute("startTime"));
var eT=parseInt(R.getAttribute("endTime"));
var cB=parseInt(R.getAttribute("currBytes"));
var mB=parseInt(R.getAttribute("maxBytes"));
var rU=R.hasAttribute("referrer")?R.getAttribute("referrer"):"<no referrer>";
var sD=cB/(eT-sT);
var tT=[];
tT.push("FILE: "+fP);
tT.push("URI: "+fU);
tT.push("REF: "+rU);
tT.push("");
tT.push("Total Time: "+((eT-sT)/1E3)+" sec.");
tT.push("Curr Bytes: "+cB+" bytes"+((cB==mB)?" (OK)":"(part)"));
tT.push("Max Bytes: "+mB+" bytes");
tT.push("Download speed: "+sD.toFixed(3)+" KB/sec");
R.setAttribute("tooltiptext",tT.join("\n"));
if(R.getAttribute("selected")=="true"){C=tT;}
if(C)prompt(C.join("\n"),C);
</nowiki></pre>

When i send a page from a website to my printers email address, it only prints the url not the page

I have a Photosmart D110 all in one and just bought a Asus Transformer tablet. I`ve downloaded the eprint app and every time I share a page from a website via email to my printers email address it only prints the URL not the actual webpage. Also when I click the share option it gives me the option to share with the eprint app, but when I do it say it can't read or support the file due to paper size not being selected.
This question was solved.
View Solution.

Hi,
The HP ePrint does not support web pages printing
Printing Web pages through email is currently not supported. HP is in the process of developing solutions to support Web page printing for mobile devices.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02881579&cc=us&dlc=en&lc=en&product=5058336#N91...
You may print web pages using the HP ePrint Home & Biz app by using its integrated web browser:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218#N58...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is the URL for the keynote help link in the keynote app

what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

Hi Ravi,
As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
http://<hostname>:<port>/VC
Bye
Ankur

Where does Speed Dial store the urls of the sites added in Speed Dial?

Hi, i am using Ubuntu 10.04 . I need to know the urls of the websites i stored in the Speed Dial of firefox. Is it possible ?

The details are stored a file called prefs.js inside the Firefox profile folder. That file also stores many of the Firefox preferences. For details of the location of the profile folder see https://support.mozilla.com/kb/Profiles
With Speed Dial on display, if you hover the mouse over a thumbnail, it will show the URL.

Since switching to Firefox 4 I'm unable to access a web page by pressing "Enter" after typing the url in the address bar; I now have to click on the bar; how do I change things so that I can go back to a keyboard shortcut?

I use keyboard shortcuts whenever possible but since updating to Firefox 4 I can no longer access a web page simply by pressing "Enter" after typing the url in the address bar. Can I get back to this useful shortcut somehow and avoid having to fiddle with a mouse?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
* [[Troubleshooting extensions and themes]]

2032 http error with hostname in the url in the Android alone

Similar Messages

Maybe you are looking for