206 unable to set alert only for certain group

Hi,
is it a symbian unwanted feature that user is unable to set Nokia 206
profile to alert for certain group (even though this kind of functionality is
available on this phone)?
To be more precise user is able to set profile to alert only for certain
group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
This feature has been available and workin in previous Nokia phones
since last decace - is it a software quality issue or what.
Best regards,
Hez

It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Unable to set site permissions for AD group

Hello,
I have upgraded TFS from 2012 to 2013 Update 2 and using SharePoint SP1.
The TFS server is installed in Domain A which has Trust to Domain B (domain B doesnt have trust to domain A). User account that the TFS runs under is from Domain B, also application pool in IIS runs under account from Domain B.
Problem is that i cannot add domain groups from Domain A to the site permissions, i can add users but not the groups.
The error i get when adding domain group from Domain A: "The user does not exist or is not unique"
Does anybody have that or had this kind of problem?

It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to print remittance advice for certain quick payments

Hi,
This is regarding issue " Unable to print remittance advice for certain quick payments."
Product version:11.5.10.2
Description:
-Customer has paid through the payment batch.But the payment batch data is not available in ap_inv_selection_criteria_all.
-The status of the check is 'RECONCILLED'.
-The payments have already been submitted to the bank and reconciled to bank statement lines.
-While running "Send Separate Remittance Advices" concurrent program, some payments generated from Quick Payment are not available for selection for generation of remittance advice.
Research:
Search in the metalink but could not find any related issue.
Could you please adivce me how to proceed on this issue.
Thanks
Subhalaxmi
Edited by: user13536207 on Feb 13, 2012 12:43 AM
Edited by: user13536207 on Feb 13, 2012 12:46 AM

Found the problem.
Paper size for those documents are actually A5 size.
Solve it by adjusting the Scale to paper size in the printing option to the size that our printer is set to printout
which in my case is 'Letter'
Hope this helps anyone who is encountering the same problem.

Text Mandatory only for Certain Materials in Sales Order

Is there anyway so that I can make certain item text mandatory only for certain materials?
I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
Thanks in advance

Hi,
what you tried is correct and that is been followed in most of my projects wherever I worked. That is the best way recommended also.
If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
Regards

How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

I think so: [http://discussions.citrix.com/topic/330585-firefox-default-browser-for-all-users/]
Can you also set the default programs in the Group Policy User Settings?
Reference: [http://community.spiceworks.com/topic/884740-default-user-profile-in-citrix-environment]

Setting alert severity for any alerts coming from servers in a particular group

Hello.
We have a particular group of servers where we would like ALL alerts that come in, to be at the warning level.
To manually hit each monitor and set an override for that group is impossible.
I suppose it would be possible to script a change that touches every monitor in the database and sets the override, but that seems very invasive.
Is there a simple solution I'm missing?
We use Netcool to front end SCOM 2007 R2, and right now errors display in red in Netcool and warnings come in orange. Basically we want everything for this group to end up orange.
Thank you!

Creating Monitor overrides via a script
http://www.systemcentercentral.com/Forums/tabid/60/categoryid/4/indexid/57457/Default.aspx
How to Create an Override for a Monitor
http://msdn.microsoft.com/en-us/library/bb960482.aspx
[OpsMgr] How to Create an Override for a Monitor (updated SDK sample)
http://scompro.wordpress.com/2011/10/09/opsmgr-how-to-create-an-override-for-a-monitor-updated-sdk-sample/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

A quick way to set different color for certain items in JList?

is there a quick way of setting different color for certain items in JList?

Either use HTML strings as the values in your JList (quickest, but may not be the most convenient, especially if your model isn't just text), or create your own ListCellRenderer (e.g. extend DefaultListCellRenderer).
There is no such thing as "list.setItemForeground(int index, Color c)". You'll have to use one of the methods above.

Unable to set import lock for software component version

Hi team,
While importing object (.tpz) file into integration repository we are getting error message as below.
======
Unable to set import lock for software component version <XXXX>-COMMON,1.0 of <XXX>.com because user <userid> is currently importing data to this component
try again once user <userid> has finished importing data
=======
We checked with the user and found he is not doing any activity in fact he logged off. the developer wants to import and how do we terminate this import attement and proceed with new importing of the same object
We wan't to avoid cache refresh as this is production environment
We already performed clear SLD data cache with in the IR not for whole.
Thanks
Vijay

Hi Vijay,
Thefollowing threads speak about the locking issues with the IR objects .Hope this will help you out in resolving the issue.
http://help.sap.com/saphelp_erp2005/helpdata/EN/93/a3a74046033913e10000000a155106/content.htm
Internal lock version management : Unable to copy objects
Thanks,
Ram.

Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`.

When starting Server Preferences, I receive a window with the following text:Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`. There may be an error with the Open Directory Service.
This started to occur after I used the command changeip to change the ip of the service.
I've tried (Re)starting Open Directory Service, but that doesn't resolve it.
Does anyone know how I can resolve this error? I'd like to be able to user Server Preferences again!

One of our servers (10.6.8) that had been running for months suddenly started generating that error message when trying to access Server Preferences. Workgroup Manager, which seems to use the same login information, accessed just fine. We tried deleting access information in Keychain, to no avail. What finally worked for US was:
- Via Server Admin, (in Open Directory > Settings > General) change the Role: Open Directory from Master to Standalone
- This (for us) then restored access to Server Prefs
- Use Server Admin to change the Role back to Master
Warnings - 1) backup first 2) you will have to reinstall the master password, and 3) ALL accounts were lost and had to be recreated.

Rpc.nfsd: unable to set any sockets for nfsd

Hi all!
I have problem..
[root@myhost ~]# /etc/rc.d/nfs-server restart
:: Stopping rpc.mountd daemon [FAIL]
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [DONE]
:: Starting rpc.nfsd daemon [BUSY]
rpc.nfsd: unable to resolve ANYADDR:nfs to inet address: Servname not supported for ai_socktype
rpc.nfsd: unable to set any sockets for nfsd
My configs:
- daemons in rc.conf
DAEMONS=(syslog-ng crond network @adsl @iptables @sshd @rpcbind @nfs-common @nfs-server @alsa @cups !deluged hal @inadyn !netfs slim)
- /etc/hosts.allow (server: 192.168.2.1, client: 192.168.2.2)
sshd: 192.168.2.2/255.255.255.255
ALL: 192.168.2.2/255.255.255.255
- /etc/exports
/home/kate/Torrents/ 192.168.2.2/255.255.255.255(rw,fsid=0,no_subtree_check,async)
Any ideas?
Last edited by gard (2010-09-11 07:18:35)

I have same problem and i'm using networkmanager (notebook, wifi). My DAEMONS section on rc.conf:
DAEMONS=(... networkmanager alsa kdm cups bluetooth rpcbind nfs-common nfs-server netfs autofs ...)
When i try automatically connect on boot, i have same problem (but network work now without X starts, after console login).
When i try
[stepan@stepan-nb ~]$ sudo /etc/rc.d/nfs-server restart
:: Stopping rpc.mountd daemon [FAIL]
:: Stopping rpc.nfsd daemon [DONE]
:: Unexporting all directories [DONE]
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [DONE]
:: Starting rpc.nfsd daemon [DONE]
:: Starting rpc.mountd daemon [DONE]
after boot and login, everything works, but on boot nfs-server init script fails to start.
Last edited by Tapan (2010-01-06 19:22:25)

Unable to set parent context for this record.

Has anyone seen this error when doing an import? In my case I was doing an import to the Opportunity Product record.
the full error message is
Unable to set parent context for this record. Please make sure that the parent record is valid and you have permission to modify the parent record.
I was attempting to populate one field on the record with data.

Hi,
Was there a resolution to this that you found, cause it's driving me crazy.
We've resorted to manually created a product in OnDemand with an EUI and exported it but we can't reimport it to overwrite it as we get the same error message "Unable to set parent context for this record"
The opty and the product both exist as they got manually created, although when you export them there are now 2 of them (I see this in reporting as well????)
Besides the Opty-Product External ID what else is required to do an import to overwrite?
regards
Alex

Problem with XI objects transport - Unable to set import lock for SWC

Hi guys!
I try to import objects from dev to qa but I'm getting following error:
Unable to set import lock for software component version SWC_xxxx , 1.0 of company.com because user OSALUDEW is currently importing data to this component Try again once user OSALUDEW has finished importing data
The problem is, I'm not importing anything.. Well, I try to import, but something is hanging there from previous time.
How to solve this issue?
Thank you!
Olain

Well,
I closed all the applications - repositories (dev, qa), directories (dev, qa), then started qa repository again and imported the objects successfully
....hmmm....
Olian

Marketing attribute sets applicable only for specific BP roles

Hi,
I have created Marketing attributes in CRM and assigned them to Attribute sets applicable only for Organizations.
Now they are eligable for all BPs created independent of BP role. Since I don´t want the Potential customers to have the same attribute sets as the Customers or Competitiors my question is:
Is it possible to determine which attribute sets to be available for a BP based on its BP role?
BR,
//anders

Hi,
Do we got any solution for the above mentioned error? i too getting same issue.
thanks
ARun

Has anyone encounter this "unable to set node credentials for /LDAPv3"?

Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
Thanks
Luis

Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
Which implies that at least two problems lurk.
Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
I did not expect that Open Directory would be a big problem.
If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.

How to enable Client Cert Required, only for certain URL's in the webserver

WE are using netegrity siteminder for authentication and their plugin is executed as AuthTrans function. If I enable clientauth in server.xml ( which is basically turning on the client cert required for entire site), everything works fine. But If I want to turn that on only for certain URL's how do I do that.
I tried turning global clientauth off in server.xml and tried using PathCehck fn"get-client-cert" in obj.conf for the URL's that need client cert, but the problem is AuthTrans is getting executed first and my netegrity plugin is throwing an error saying it cann't find the cert.
What are diffrent options to enable cert required only for certian URL's.
Thanks

What is the condition you want to match?
You can use get-client-cert in If tags in Web Server 7.0 :
For e.g. If the condition is matched, This gets a cert, requesting it if it is not already present and failing the request if it can't obtain an acceptable cert only on POST requests.
<If $url ~="*abc*>
PathCheck fn="get-client-cert" method="POST" dorequest="1" require="1"
</If>
or
<Object ppath="*abc*">
PathCheck fn="get-client-cert" dorequest="1" require="1"
<Object>
for more details :
http://docs.sun.com/app/docs/doc/819-2630/6n4thbiek?a=view#indexterm-380

206 unable to set alert only for certain group

Similar Messages

Maybe you are looking for