20G U2special edition i-pod "do not disconect" won't go away

Hello I need help!!!!
I connected the Ipod to the pc and the "do not disconnect" icon appeared...Then it took a while I tried to disconnected in the pc using the eject button but my pc didn't recognized it(ITUNES didn't recognized the ipod either) I intalled the latest software, try to use the updater to restored but it can't read it. Now I plug everything off of it and it still shows that Icon. I put it to charge and it looks its charging and when using the hold button I can de the little lock icon, but the "do not disconnect icon is still there my pc doesn't recornize it and I can't listen to anything.
If anyone have ideas please let me know Thanks!

Now when I connect my nano to the new computer, it says it's synching but when it's done the "do not disconnect" won't go away (I let it stay connected all night and when I woke up it was still there)
If you have your iPod set to automatically sync with iTunes version 7 or later, connect the iPod and when you see the summary screen, uncheck the box marked "enable disk use".
If you are using an earlier version of iTunes, right click on the iPod in the source list, select options and uncheck the same box.
In future your iPod should automatically disconnect after it’s finished transferring music.

Similar Messages

Update is complete but "do not disconnect" won't go away!!!

I listened and it is still spinning in there too. It's been doing this all evening. We used the advice on the site and tried ejected it. Didn't work. Tried the other couple of things it mentioned (turning itunes off and on again) and finally just disconnected it.
We then waited awhile and tried again. that's when I uploaded music and now it's doing the same thing.
??????

In edit\prefs\iPod, is 'Enable Disk Usage' checked?

Help flashing do not disconnet won't go away and problem with video

Hi - when I go into the options to set my music download etc, the page for video is grey and will not allow me to select automatic updates. When I drag the video over it says it has been unable to install it.
It now also keeps flashing the 'do not disconnet screen'
I am technophobic so really need help. My hubby bought this for my christmas as I love music but I am lost - it is the 60 GB version so there is loads of room.

If your ipod is a 60gig one, you have a fifth generation ipod (As known as ipod video)
this is the correct forum for your answer
http://discussions.apple.com/forum.jspa?forumID=808
i would like to help you, but i never used and ipod video.
good luck

Do not disconnet won't go away

I have a g4 and updated my ipod ver.3.. when I don't it and it downloads new muisc to the auto playlist, it continues to say do not disconnect. I didn't have this issue before I updated the ipod software.
any ideas anyone??

"when I don't it and it downloads new muisc to the auto playlist"
When you don't it?! What does that mean?
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music.

Do Not Disconnect won't go away

Everything on my iPod 30 gig was wonderful until I bought a new Nano for my granddaughter. To get her started I bought some songs and transferred them using my computer. To do this, I had to change the settings on her "guest" computer to manual.
I know, I know. I've since called and found out how to set up separate profiles in XP. Cumbersome but it works.
I've reset my iPod to automatic update and I've finally gotten it to update automatically again. But while my desktop now says "okay to disconnect" my iPod keeps the "do not disconnect" icon until I just unplug it. I've checked all the settings and they seem right. Ejecting does work, but it used to disconnect automatically.
Any ideas?

sometimes my ipod doesnt eject when i press the eject button in itunes either. thats when i go into "my computer" and right click my ipod and select eject from there. that usually does the trick.
chris

The edit JSP page does not appear...

Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
               <h:dataTable
                         value="#{myBean.myDataList}"
                         var="myDataItem"
                         binding="#{myBean.myDataTable}"
               >
                    <h:column>
                         <f:facet name="header">
                              <h:outputText value="Ajdi"/>
                         </f:facet>
                         <h:commandLink action="#{myBean.editMyData}">
                              <h:outputText value="#{myDataItem.id}"/>
                         </h:commandLink>
                    </h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
     private List myDataList;
     private HtmlDataTable myDataTable;
     private MyData myDataItem;
     protected Connection Conn;
     // *********************** actions ***********************
     public String editMyData() {
          myDataItem = (MyData)getMyDataTable().getRowData();
          return "editmydata";
     public String saveMyData() {
          try {
               updateDataInDB();
          catch (SQLException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          catch (NamingException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          return "listmydata";
     // *********************** setter ***********************
     public void setMyDataList(List myDataList) {
          this.myDataList = myDataList;
     public void setMyDataTable(HtmlDataTable myDataTable) {
          this.myDataTable = myDataTable;
     public void setMyDataItem(MyData myDataItem) {
          this.myDataItem = myDataItem;
     // *********************** getter ***********************
     public List getMyDataList() {
          if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
               loadMyDataList();
          return myDataList;
     public HtmlDataTable getMyDataTable() {
          return myDataTable;
     public MyData getMyDataItem() {
          return myDataItem;
     // *********************** others ***********************
     public void loadMyDataList() {
          try {
               getDataFromDB();
          catch (NamingException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          catch (SQLException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
     void getDataFromDB() throws NamingException, SQLException {
          myDataList = new ArrayList();
          java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
          PreStat.execute();
          java.sql.ResultSet Rs = PreStat.getResultSet();
          while(Rs.next()) {
               MyData OneRecord = new MyData();
               OneRecord.setId(Rs.getLong(1));
               OneRecord.setName(Rs.getString(2));
               OneRecord.setValue(Rs.getString(3));
               myDataList.add(OneRecord);
     void updateDataInDB() throws SQLException, NamingException {
          String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
          java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
          PreStat.setString(1,myDataItem.getName());
          PreStat.setString(2,myDataItem.getValue());
          PreStat.setLong(3,myDataItem.getId().longValue());
          PreStat.execute();
          ownGetConnection().commit();
     Connection ownGetConnection() throws SQLException, NamingException {
          if (Conn == null) {
               InitialContext IniCtx = new InitialContext();
               DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
               Conn = Ds.getConnection();
          return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
     <h:panelGrid columns="2">
          <h:outputText value="Name"/>
          <h:inputText id="name" value="#{myBean.myDataItem.name}"/>
          <h:outputText value="Value"/>
          <h:inputText id="value" value="#{myBean.myDataItem.value}"/>
     </h:panelGrid>
     <h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>

I have put his lines in the faces-config.xml and now it works:
     <navigation-rule>
          <from-view-id>*</from-view-id>
          <navigation-case>
               <from-outcome>editmydata</from-outcome>
               <to-view-id>editmydata.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>
     <navigation-rule>
          <from-view-id>*</from-view-id>
          <navigation-case>
               <from-outcome>listmydata</from-outcome>
               <to-view-id>listmydata.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
     public String editMyData() {
          myDataItem = (MyData)getMyDataTable().getRowData();
          return "editmydata";
is it right or Do I make a mistake somewhere?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

I cant copy/paste from an article to my web site, get a Mozilla Rich Text Editing demo page will not work.HELP

Tried to copy/paste from an article to my web site and got a "cannot copy /paste " warning and was directed to a security perferences site that said that Mozilla Rich Text Editing demo page will not work.
Tried to find my Firefox profile directory using the start menu and was directed to hit enter to go to web. Feel like i am getting run around.

Let's start with something very basic, and that is, you do not need to use the paste button on most websites. The button just reads what is on your clipboard and sticks it into the form. You can do that yourself using Ctrl+v or right-click>Paste.
For your security, I suggest using those standard Windows keyboard shortcuts (Ctrl+x cut, Ctrl+c copy, Ctrl+v paste) or the context menu.
Occasionally you will find a paste button that runs a clean-up script or otherwise does something useful. That is where the (admittedly a bit complicated) instructions come in handy.
To open your active profile folder, you can use:
Help > Troubleshooting Information > "Show Folder" button
Which help article are you using for the modifications?
Finally, please be cautious in opening up your clipboard to sites. You may have stuff you copied from other pages or other programs that you do not want to share with most sites.

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Why my i pod is not working with out charger

hey, my i pod is not working with out the charger plugged into it?!

What do you mean? Please be more precised so I may help you father. If it is plugged in, but won't open. You must wait at least 5 minutes before using it again. Ipod need a certain amount of power for it to start. Or even when its plugged in but wont charge, make sure it is connected very well to the computer or the power outlet to the Ipod. Lastly, if you are charging at another place, for example in your friend's house. The voltage power may be different from where you mostly charge it from. But if it isn't plugged. Maybe it need to be charged?
Hope this helps.
~pnoypryde

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people :(

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people

There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Lightroom 5.4, syncing photo settings edited in CS6 does not work. Maverick OS 10.9, Raw 8.3.0141

I recently updated Lightroom to 5.4 and noticed that when the file comes back from CS6, the edit/sycn settings does not work. Selecting the gray area of the source file, and selecting another, clicking on the sync produces nothing. When I select a source image and another that has not visited CS 6 the sync works fine. I have used this simple technique for years with previous versions and never had a problem. Something has changed with the update and/or compatibility with the file coming back into Lighroom. Any thoughts about this would be appreciated.

ssprengel, thanks for following up. I work with DNG files in Lightroom that have been converted from Raw CR2 files. They are exported from Lightroom to Photoshop as Tiff files and any files that i edited and traveled round trip could not be used to sync other files in Lightroom. Even simple edits like saturation or exposure have disabled the file from being able to sync the settings to other files. I do most of the syncing of develop settings in Lightroom, but occasionallly I will adjust basic settings in Photoshop for one reason or another and after updating to 5.4 I noticed that sync worked fine within Lightroom only. I have tried a few changes to preferences with regard to how develop settings are registered with the file and that hasn't made any difference. Any ideas?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

20G U2special edition i-pod "do not disconect" won't go away

Similar Messages

Maybe you are looking for