20GB of HD used after computer froze

I was trying to post to another Apple forum when my MacBook froze. It wouldn't respond to anything so I had to close the system down by powering off. When it rebooted I noticed that the available HD had been reduced by 20+GB. Not sure if it is related to the system crash but I need to find where the HD space has disappeared to.
Is there a system log that I can access and maybe post to this forum that will help find the cause of the loss of HD space?

Thanks Carolyn
I'll try the steps you outlined later this evening but in the meantime here is the crash log:
Process: syslogd [13]
Path: /usr/sbin/syslogd
Identifier: syslogd
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-07-12 20:01:22.891 +0800
OS Version: Mac OS X 10.5.7 (9J61)
Report Version: 6
Anonymous UUID: A12F2C88-BBD6-4EA0-BC11-99F9758FD9C1
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000d2ad007f
Crashed Thread: 1
Thread 0:
0 libSystem.B.dylib 0x93afbc7e write$UNIX2003 + 10
1 syslogd 0x000086f1 0x1000 + 30449
2 syslogd 0x000087a1 0x1000 + 30625
3 syslogd 0x00009640 0x1000 + 34368
4 syslogd 0x0000f539 0x1000 + 58681
5 syslogd 0x000017f2 0x1000 + 2034
Thread 1 Crashed:
0 libSystem.B.dylib 0x93b34987 nc_tablefind + 67
1 libSystem.B.dylib 0x93bf86b1 notify_libpost + 57
2 libSystem.B.dylib 0x93b05b20 notify_post + 158
3 syslogd 0x0000aa7d 0x1000 + 39549
4 libSystem.B.dylib 0x93b04155 pthreadstart + 321
5 libSystem.B.dylib 0x93b04012 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x93ada46e _semwaitsignal + 10
1 libSystem.B.dylib 0x93b04dcd pthreadcondwait$UNIX2003 + 73
2 syslogd 0x0000a29f 0x1000 + 37535
3 syslogd 0x0000a53a 0x1000 + 38202
4 libSystem.B.dylib 0x93b04155 pthreadstart + 321
5 libSystem.B.dylib 0x93b04012 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x93ad3286 machmsgtrap + 10
1 libSystem.B.dylib 0x93adaa7c mach_msg + 72
2 libSystem.B.dylib 0x93bfcafb vprocmig_logdrain + 97
3 libSystem.B.dylib 0x93bfb9ce vprocmgr_logdrain + 75
4 syslogd 0x00009580 0x1000 + 34176
5 libSystem.B.dylib 0x93b04155 pthreadstart + 321
6 libSystem.B.dylib 0x93b04012 thread_start + 34
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0x00020000 ebx: 0x93b05a9b ecx: 0x0159b84f edx: 0x0000184f
edi: 0x00102020 esi: 0xd2ad007f ebp: 0xb0080e48 esp: 0xb0080e20
ss: 0x0000001f efl: 0x00010282 eip: 0x93b34987 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0xd2ad007f
Binary Images:
0x1000 - 0x10ffe +syslogd ??? (???) <00418acf3a66596602af05f8a9f4e1a2> /usr/sbin/syslogd
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x93ad2000 - 0x93c39ff3 libSystem.B.dylib ??? (???) <b47c8e6e45aef620730710a732bf1930> /usr/lib/libSystem.B.dylib
0x94eea000 - 0x94eeefff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x95bb8000 - 0x95bbffe9 libgcc_s.1.dylib ??? (???) <e280ddf3f5fb3049e674edcb109f389a> /usr/lib/libgcc_s.1.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

Similar Messages

  • I was in iphoto cropping, the computer froze, I powered down.  after restart, I lost the pictures I was working on.  How do I find them?

    I was cropping in iphoto, the computer froze, I powered down.  After restart, the photos were lost.  How do I find them?

    Do the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
    NOTE:  was it the computer that froze or just iPhoto?  If it was just iPhoto you can use the  ➙ Force Quit menu option to quite out of iPhoto without having to power down.
    OT

  • Computer froze while updating - Can't use gnome/cinnamon

    Hello
    Today I tried to update but then my computer froze. After restarting archlinux I couldn't login into my gnome or cinnamon. I also have openbox installed where I have no access to a terminal.
    If I try to use gnome/cinnamon it redirects me to the linux shell. I tried to reinstall gnome/cinnamon but it didn't have any effect.
    Any ideas what I can try?
    edit
    I also have no access to my filemangers in openbox and gnome terminal doesn't work either.
    Last edited by kantaki (2013-05-15 11:17:30)

    i assume your computer froze during the update operation, leaving your installation in a unstable state. after restart you are not able to access anything. if that is the case, i think the best option is to use a arch installation disk/usb to boot and finish the update.
    1. create a bootable meadia - cd/usb and boot using that
    2. mount the partitions
    3. arch-chroot to the mounted root partition
    4. run pacman -Syu
    if the above is not the case, please give more details.
    thanks

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • Wifi disconnects after about a minute after i am no longer using my computer . Why is this happening?

    After logging into my wifi connection, which does take some time to do.
    Why does my wifi disconnect after not using my computer for a few minutes?
    I am on osx lion  10.7.5

    Computer entering sleep mode after few minutes?

  • My 4th gen ipod won't backup after it froze during a software update to 4.3.5. I had to cancel the backup at the start of the update and now it won't let me backup to my computer, freezes during backup or says my backup is corrupted.

    I pressed 'X' during a backup after it froze during an update to software 4.3.5 and now it won't let me backup on my computer. Does anyone have any ideas? It either freezes during backup or says my 'backup is corrupted' or 'I cannot backup on my computer'. I have had to abort quite a few attempted backups since the initial problem, which I think has made it worse. I have already tried restoring my ipod, deleting the aborted backup from my preferences/devices in itunes and deleting it from my user/appdata/etc on my PC hard drive. Any ideas what to try next?

    After hours of frustration I eventually decided to restore. I lost my apps, but i didn't have many and was able to reinstall them for free. During the restore it updated my ipod to the latest software 4.3.5, which i think may have caused the initial problem, but the backup issue remains. Sometimes it stops me from syncing and other times it allows me to skip the backup, but still says that i can't backup on my computer. I'm worried that it has done something to my computer as it took me six hours to do a Bullguard scan, which only normally takes about an hour. The scan didn't come up with any viruses, but it stalled at system32 for ages. The only other thing that i can think of is that a demo CD I uploaded may have caused a problem. iTunes couldn't find a track listing for it but gave me a few different options. i thought I had to choose one to continue, so did that then changed the track details to the correct tracks. I'm now worried that may have introduced an issue or caused a glitch in iTunes. How paranoid am I sounding?  

  • Do I need to reinstall everything to use a computer for a paid membership after using it for a trial under a different account?

    Do I need to reinstall everything to use a computer for a paid membership after using it for a trial under a different account? The programs say "start trial" or "trial ended" or "buy" next to them even after I sign in with my membership and then download them.

    Hi Marcella,
    You need not re-install your applications. Just activate your creative cloud license by signing out of the Creative cloud application and then sign back in.
    Please refer to the help document below for the steps:
    Sign out, Sign in | Creative Cloud Desktop app
    Regards,
    Sheena

  • I deleted pictures from my camera roll using my computer since i didn't have enough space to back up my ipad in my 5 gigs of space. but after deleting a huge amount of pictures. the size of the camera roll is still the same as when i started.

    I deleted pictures from my camera roll using my computer since i didn't have enough space to back up my ipad in my 5 gigs of space. but after deleting a huge amount of pictures. the size of the camera roll is still the same as when i started. some of these same pictures are still on my photostream. I deleted some of them -this time from the ipad itself- but the size of the camera roll remains the same. should i have not remeoved them using the computer for the camera roll.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 v.3. What could be the problem, how ca

    I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
    What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
    == Operating system ==
    windows XP

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

  • How to use "Submit - after computation" with PL/SQL?

    Hi,
    I'm new in APEX
    My scenario: I have a date column that I need to populate automatically (DATE_CREATION = sysdate) when I create a row, probably on "Submit - After Computations and VAlidations" with PL/SQL, how can I do that?
    Thanks for your reply
    Sam Karema

    You should be able to use the PL/SQL APIs to get the current page
    or back page. The portlet runtime record has these APIs
    type portlet_runtime_record is record
    portlet_id - number,
    provider_id - number,
    node_id - number,
    reference_path - varchar2(100),
    language - varchar2(30)
    exec_mode - number,
    back_page_url - varchar2(4098),
    page_url - varchar2(4098),
    page_type - varchar2(200),
    has_title_region - boolean,
    has_border - boolean
    caching_key - varchar2(200),
    caching_level - varchar2(30),
    caching_period - number
    back_page_url
    The URL for the calling page.
    Notes: The value stored in this field is used by portlets to
    redirect users to the calling page (previous page).
    This value can be null if there is no calling URL.
    Datatype: varchar2
    page_url
    The URL of the page that contains the portlet instance that will
    receive the portlet_runtime_record. Current page.
    Datatype: varchar2
    Hope this helps,
    Sue

  • Computer froze; after reboot: "No AirPort card installed."

    I was online checking email, doing nothing out of the ordinary, when all of a sudden my computer froze. There was no spinning wheel; the computer was completely unresponsive. I manually powered it off, and when I turned it back on and found that I could not connect to the internet. I clicked the AirPort icon and the dropdown said "No AirPort card installed."
    I reset the PRAM. I did an SMC reset. I reformatted the hard drive and reinstalled OS X. I did both the standard and extended Apple Hardware Tests and there was "No trouble found."
    In System Profiler, under Network > AirPort, the various Software Versions are listed. However, AirPort is not listed under Network > Active Services. In System Preferences > Network, AirPort is "Off" and when I attempt to turn it on, nothing happens. If I delete the AiPort connection and try to add a new one, "AirPort" does not appear in the interface dropdown menu. I tried turning AirPort on via Terminal using the command "sudo ifconfig en1 up" and received the message "ifconfig: interface en1 does not exist".
    At this point it seems as though the AirPort card has crapped out, but if it did indeed go bad, why does it not show up in Apple Hardware Test? Does anyone have any suggestions for me?

    As I understand it, the SMC and PRAM are actual chips on the logic board, and the resets restore them to their original factory values. That's about all I know to say about them since I'm not an IT person and have very little troubleshooting experience myself.
    I'm not familiar with the term NIC. Is this the same as the airport card?
    http://www.powerbookmedic.com/13-MacBook-Airport-Card-p-17152.html
    If so, it should be easy to locate on the logic board as it's pretty large. I don't know if the same card is used in both of your 13" Macs or not--You would need to research that for yourself. However, it seems like in many cases, replacing the card didn't seem to work, although you could always inspect it to be sure the antenna is well seated. I'm not familiar with the 13" card, but the card in my 17" MBP actually has 2 antennas.
    Both PowerBook Medic and ifixit have step by step guides for disassembling Macs and replacing parts. You may be able to find the information you want there.
    Just finished looking through the long thread, and it looks like every possible solution that I could think of has been tried.
    As for testing the hardware, many people have recommended Tech Tool Pro:
    http://www.micromat.com/
    You also should have the Apple Hardware test on one of your original system discs, and if you had Applecare, a Tech Tool Deluxe disc with a hardware test. I'm not sure, but it may be that if you purchased Applecare and got Tech Tool Deluxe, you may be able to buy Tech Tool Pro at a discount.
    Apple Stores also have a hardware test they can run from their store feed if you have access to one.
    If you do decide to resort to a USB card, here's one that works pretty well:
    http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
    Good luck!

  • Flash Builder 4.5 blank mxml after computer freezes

    Hi !! I have a very strange problem, last night using Flash Builder 4.5 in the moment i was saving the project my computer froze and i rebooted my computer and the Main.mxml file is filled now with blank spaces. The properties says it is 230Kb but opening it in the text editor is just blabk spaces, trying to open in flash builder but ir hangs and when i open the project it gives me "Content is not allowed in prolog." Any ideas ?? Thank you very much !!

    Hi Anirudh !! thanks for the response. I have opened the mxml file in wordpad and in notepad, just blank spaces, 230kb of blank spaces, i think it has to do with saving (flash builder automatically builds the project on save) and freezing just the instant after i saved. I really dont think there is a solution, will have to redo it, thank you very much, hope this does not happen to anyone else, it is very frustating and depressing to lose a project. Best wishes !!

  • Computer froze while updating. iTunes has disappeared

    I was updating my iTunes when my computer froze and now my iTunes has been deleted and I can no longer reinstall. I have tried to download iTunes in the most updated version, but I cannot actually proceed with the download. Does anyone know how I can fix this? I have tried rebooting my computer. I have also looked in the Control Panel to see if the program was there, and it's as if the program has completely vanished from my computer. SOMEONE PLEASE HELP!!!

    i assume your computer froze during the update operation, leaving your installation in a unstable state. after restart you are not able to access anything. if that is the case, i think the best option is to use a arch installation disk/usb to boot and finish the update.
    1. create a bootable meadia - cd/usb and boot using that
    2. mount the partitions
    3. arch-chroot to the mounted root partition
    4. run pacman -Syu
    if the above is not the case, please give more details.
    thanks

  • Computer froze and fan started going faster by the second. What could've happened?

    I was using my computer (MacBook Pro Retina 13") and suddenly it froze and the fan speed was going higher by the second. I had to switch off the compute before something serious happens.
    I did the EtreCheck after reading some of the responses. Hope this helps in figuring out what is going wrong. Also how to minimise the CPU usage and reduce the RAM as well?
    Problem description:
    My computer froze and the fan (I guess it was the fan) starting blowing harder and harder and harder by the second. I got worried that It might blow up or burn up so I switched it off immediately. Most of my memory is used up by Kernel_task and I am not sure what that is!
    EtreCheck version: 2.1.1 (104)
    Report generated December 9, 2014 at 11:55:35 AM EST
    Hardware Information: ℹ️
      MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
      MacBook Pro - model: MacBookPro11,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Not upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel Iris -
      Color LCD spdisplays_2560x1600Retina
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:10:51
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 120.11 GB (19.59 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 120.47 GB Online
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/ExpressVPN.app
      [not loaded] expressvpn.tap (1.0) [Support]
      [not loaded] expressvpn.tun (1.0) [Support]
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (9.0 23136.932290) [Support]
      [not loaded] com.parallels.kext.hypervisor (9.0 23136.932290) [Support]
      [not loaded] com.parallels.kext.netbridge (9.0 23136.932290) [Support]
      [not loaded] com.parallels.kext.usbconnect (9.0 23136.932290) [Support]
      [not loaded] com.parallels.kext.vnic (9.0 23136.932290) [Support]
      /Applications/VMware View Client.app
      [not loaded] com.vmware.kext.vmioplug.10.3.20 (10.3.20) [Support]
      /System/Library/Extensions
      [not loaded] com.nike.sportwatch (1.0.0) [Support]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.nike.nikeplusconnect.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
      [loaded] jp.co.canon.MasterInstaller.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      Garmin Express Service UNKNOWN (missing value)
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      Google Drive Application (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      OpenIE
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 120.11 GB Disk used: 100.52 GB
      Destinations:
      FreeAgent Drive [Local]
      Total size: 249.72 GB
      Total number of backups: 3
      Oldest backup: 2014-10-09 16:35:45 +0000
      Last backup: 2014-11-13 01:12:02 +0000
      Size of backup disk: Too small
      Backup size 249.72 GB < (Disk used 100.52 GB X 3)
    Top Processes by CPU: ℹ️
          10% Dropbox
          9% WindowServer
          2% Safari
          1% coreaudiod
          1% Activity Monitor
    Top Processes by Memory: ℹ️
      271 MB Safari
      120 MB Dropbox
      120 MB WindowServer
      99 MB Dock
      86 MB Google Drive
    Virtual Memory Information: ℹ️
      87 MB Free RAM
      1.66 GB Active RAM
      1.45 GB Inactive RAM
      835 MB Wired RAM
      8.46 GB Page-ins
      17 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 9, 2014, 11:48:14 AM Dropbox_2014-12-09-114814_Abdulrahmans-MacBook-Pro.cpu_resource.diag [Details]
      Dec 9, 2014, 11:48:06 AM Skype_2014-12-09-114806_Abdulrahmans-MacBook-Pro.hang
      Dec 9, 2014, 11:45:18 AM Self test - passed
      Dec 9, 2014, 10:33:03 AM cloudd_2014-12-09-103303_Abdulrahmans-MacBook-Pro.crash
      Dec 7, 2014, 04:35:23 PM cloudd_2014-12-07-163523_Abdulrahmans-MacBook-Pro.crash
      Dec 7, 2014, 03:29:54 PM StataSE_2014-12-07-152954_Abdulrahmans-MacBook-Pro.hang

    Hello Abed88,
    Thanks for using Apple Support Communities.
    After you restarted your computer did the issue where your fans were spinning at a high RPM and the Mac became unresonsive come back?  If so I recommend that you start with doing an SMC reset.
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Take care,
    Alex H.

Maybe you are looking for