20th Anniversary Mac and Networking

I have a 20th Anniversary Mac running OS 7.6.1. Our internal network is based on Windows 2003 servers. How can I get the 20th Mac on the internet? I have a NIC card installed. I have tried letting it use DHCP, manually setting the IP, etc., but nothing seems to work.
Any ideas?

Check your software posting of the same topic here:
http://discussions.apple.com/thread.jspa?threadID=752057&tstart=0

Similar Messages

  • 20th Anniversary Mac and iTunes

    I read somewhere that it might be possible to use the TAM Bose sound system with streamed iTunes music. I have a 350 MHz TAM with a 10/100 ethernet card. Is it possible to stream from my G5 iMac to the TAM with Airport Express and Airtunes? I have iTunes V.2 on the TAM but I'm sure no one was thinking of this capability in those days. The Bose sound system is so good that I'd really like to utilize it if possible. Any help or pointers would be much appreciated to keep this computer going.

    Well, in this case, you have two options. With the iMac G5, the AirPort Express, and the TAM, you can use the AirPort Express for streaming. You can either have the AirPort Express hooked up to the Bose Speakers alone, and you could control the songs from the iMac, or you could hook up the Bose system to the AirPort Express, and hook up the TAM to the AirPort Express with ethernet. Now you could turn on sharing in both iTunes on both computers, (if iTunes 2.x supports sharing) and control the shared songs from ur iMac to be played through the bose speakers.

  • Airport Express to play music through 20th Anniversary Mac?

    I'd like to be able to play music through the Bose sound system in my G3-upgraded 20th Anniversary Mac.  I've used a very early version of iTunes but it annoyingly pauses fairly frequently while playing for some reason.  Since I have an early Airport Express and have an Ethernet adaptor in the TAM I wondered if it's possible to connect the TAM via cable to the Airport Express and stream music from an iMac connected wirelessly to the Airport.  It seems a shame not to utilize the Bose speaker system for music.  Thanks for any ideas and suggestions.

    As far as I know this isn't possible. I might try some stuff using my TAM (although results may very, mine isn't a production model) to see about figuring something out. If the computers sit close enough together you might be able to run a 3.5mm(1/8") headphone cable between the iMac's audio out and the TAM's line in, that or make use of the FM tuner and listen to some awesome FM stations.
    Now that I think of that you can invest in something like the link I'll add at the bottom of this, connect it to the speaker port of the iMac then use the tuner on the TAM to tune into the frequency of it. This would also allow the connecting of something such as an iPod.
    http://www.amazon.com/Premium-Transmitter-Sandisk-Microsoft-Creative/dp/B0028U8K 8Y

  • 20th anniversary mac service parts

    I'm curious if anyone has ideas on how I might find a CD-ROM to replace the CD-ROM in a 20th Anniversary Mac. 
    I have a TAM a friend used, and I'm trying to ready it for sale.  If you put in a CD, you hear the CD clicking, but the CD doesn't spin.  I've tried manually moving the spindle (as some older CD-Drives of that nature would sometimes have lubrication problems), but no luck.
    I've searched the web all over and cannot find if the service parts may even exist.  The drive is unique in that it opens to reveal the disc in place (rather than having a slot, a caddy, or a door that holds the disc). So even though that machine has a lot in common with the Powerbook 3400, the CD-ROM drive is different.
    Ideas?

    I don't know if you still need help on fixing your TAM CD device. I had the same problem.
    As you know, CD devices for the TAM are rarely available on eBay and cost a fortune (last auction I saw maybe went for 200 bucks or more). The Apple 600i SCSI CD-ROM (tray-loading) internally is very similar to the design of the TAM CD.. They regularly pop up on eBay for $10 to $20. Model CR-504-C appears to be the closest match.
    I bought one for $10, opened it up and discarded the casing. The circuit board is identical except for a couple wires controlling opening/closing the loading tray, and an IC chip. The motor mechanism is an identical match. I swapped the motor assemblies (carriage and all) after transferring over the rubber grommets for the TAM. Put my TAM back together, and the CD works flawlessly!
    If your problem is not with the motor carriage, then you can try using the circuit board after swapping the IC chip. If it's a problem with the chip, this solution may not work. Seems to me, there is a much higher possiblity of the motor assembly going bad than with the chip.
    There is currently an auction on eBay for several of these devices for $15 with free shipping. Can't hurt, only $15. Search eBay for AppleCD 600i CR-504-C. - Fred

  • Screensaver for 20th Anniversary Mac

    Hello, I'm looking for a screensaver for my old and bautyful 20th Anniversary Mac. Somebody knows where to find a screesaver (aquarium style...) and if it works with OS 7..6.1 ? Thanks

    rmpostal,
    After Dark was the most widely used screen saver.  A google search revealed several options.  Email if you need a disk copy.
    Here is an OS-X version:
    http://download.cnet.com/After-Dark-X-Fish/3000-2257_4-26447.html
    I did not spend a lot of time searching for the older downloads because it would be faster to walk upstairs and copy it off the TAM.
    Ji~m

  • InDesign CS6 (Mac) and network connections

    Of all the Mac apps I've used over the years, why is InDesign the only application that can't make it through a network connection issue without crashing?
    For example, when I switch from Wifi to Ethernet, it crashes; even Microsoft apps can handle the change, and that's saying a lot.
    Is there anything I should be looking at to try and remedy this situation? (Hint: Telling me that the solution is to quit InDesign before changing my connection is not a solution.)

    Ask in the ID forum.
    Mylenium

  • Virus on my mac and network

    Hi -
    I'm a long time Mac user (currently using MacBook Air) but not so tech suvvy and unfortunately, so as my husband who is non Mac user.
    My husband has this Dell laptop and had some issue with his computer and had paid for the help support from one of the MS certified technitians. Recently, this technitian guy called my husband and told him that his paid support service is just about to expire and encouraged him to renew the service. Before my husband decide to renew this contract, he told this guy to check his computer. And he found that my hubby's computer got viruses (of course, he has virus protection software from well-known company installed on his computer...). This is okay, I get that... BUT the technitian guy ran the diagnosis and found out that our home network also got viruse! and thru that network my Mac also got virus, he says.
    As far as I know, my Mac runs fine. I know, basically, we don't really need to install any virus protection s/w on Mac unless you really want to. And I'm very caucious, so I don't download any suspecious things or don't access to any suspecious website, too. So it's really hard for me to believe what this guy says. SO, here's what I really want to do; Is there any way to check if I really have any virus on my Mac other than just to see anything acts funny? Another question, how can I check, if our network (only my husband computer and my Mac are connected to this network) is really infected by any virus? And more importantly, if they are inected, is there any way to fix it?
    I really don't know, if this MS certified tech guy is telling me the truth or just lip sink (or even a lie!?) to make my husband to renew his service... My husband expects me to make a decision but with my limited knowledge (which unfortunately, more than what my husband knows... ah...). And moreover, I'm stunned by the fact (or totally lie) that my Mac has virus!!! Need your experts help!!!

    BUT the technitian guy ran the diagnosis and found out that our home network also got viruse! and thru that network my Mac also got virus, he says.
    He 'didnt tell the truth'. Ask him to name that virus.
    Currently there are no genuine Mac virus' out in the wild woods of the net
    Install ClamXaV for that "in case the sky falls and pigs fly" occurance.
    ClamAV is currently tested daily in comparative tests against other antivirus products on Shadowserver. In 2011, Shadowserver tested over 25 million samples against ClamAV and numerous other antivirus products. Out of the 25 million samples tested.
    its free
    http://www.clamxav.com/

  • Side Expansion Panel for 20th Anniversary Mac

    Hi to all you TAM-aficionados on this planet!
    I'm looking for a spare side expansion panel for the TAM (cf. user manual chapter one page 2). This one serves to hold expansion PCI cards withe the deeper rear panel. Please check your spare parts and let me know asap.
    Thanks in advance and kind regards,
    Gerald

    Dinolatino, welcome to Apple Discussions.
    Suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap
    After you join, post a WTB (want to buy).
     Cheers, Tom

  • HT4796 Migration assistant is telling me that it has lost connection with my Mac and to ensure they are on the same network.  They are, and an ethernet cable is plugged into them.  What do i do?

    Migration Assistant has been running since yesterday evening.  My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network.  I have an Ethernet cable plugged in them and they are both on the same WiFi.  What can I do?

    Hello Wyodor,
    thanks for your reply on my question.
    You are wright the index file is 308 KB.
    And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
    Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
    No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
    and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
    But I'm still hoping on a miracle :-)
    greetings Lasource

  • How do i create a little network with my i-mac and macbook

    how do i create a little network with my i-mac and macbook

    Hello:
    To give a sensible answer, a little more information is needed.
    I am guessing that you want to set up a wireless network as you have both a desktop and laptop.
    There are some pretty good tutorials/articles in the knowledge base articles.
    Barry

  • Kernel Panic while transfering data between MAC HD and network drives

     Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
    Here is the log fine  with error code:
    Error code: 0x0000000000000000
    Interval Since Last Panic Report:  5 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
    Tue Aug 16 14:54:46 2011
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
    RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
    RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80de173b40 : 0xffffff8000204d15
    0xffffff80de173c40 : 0xffffff80002d1208
    0xffffff80de173d90 : 0xffffff80002e3f4a
    0xffffff80de173da0 : 0xffffff7f815c6b54
    0xffffff80de173ed0 : 0xffffff80002524fe
    0xffffff80de173f00 : 0xffffff8000478c7f
    0xffffff80de173f40 : 0xffffff7f8159b158
    0xffffff80de173fa0 : 0xffffff80002c8527
          Kernel Extensions in backtrace (with dependencies):
             com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
                dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
             com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: iMac12,1 (Mac-942B5BF58194151B)
    System uptime in nanoseconds: 105374280984
    unloaded kexts:
    (none)
    loaded kexts:
    com.vmware.kext.vmnet            3.1.3
    com.vmware.kext.vmioplug       3.1.3
    com.vmware.kext.vmci                3.1.3
    com.trendmicro.kext.KERedirect              1.0.0
    com.trendmicro.kext.filehook   1.5.0
    com.vmware.kext.vmx86            3.1.3
    com.thursby.kext.cifs    5.1
    com.thursby.kext.NetBIOS         5.1
    com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.AppleTyMCEDriver      1.0.2d2
    com.apple.driver.AppleHWSensor           1.9.3d0
    com.apple.driver.AudioAUUC    1.57
    com.apple.driver.AppleUpstreamUserClient      3.5.7
    com.apple.driver.AppleMikeyHIDDriver                1.2.0
    com.apple.driver.AppleMCCSControl     1.0.20
    com.apple.driver.AppleIntelPenrynProfile           17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyDriver       2.0.5f14
    com.apple.kext.ATIFramebuffer              6.3.6
    com.apple.driver.AppleBluetoothMultitouch     54.3
    com.apple.driver.AppleIntelHDGraphics               6.3.6
    com.apple.driver.AppleIntelNehalemProfile       11
    com.apple.driver.AudioIPCDriver             1.1.6
    com.apple.driver.AppleHDA       2.0.5f14
    com.apple.driver.AppleGraphicsControl               2.10.6
    com.apple.ATIRadeonX3000       6.3.6
    com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.AirPort.Atheros9388   426.35.3
    com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
    com.apple.driver.AppleLPC         1.5.1
    com.apple.driver.AppleBacklight              170.0.46
    com.apple.kext.AppleSMCLMU                1.5.2d10
    com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
    com.apple.driver.AppleUSBCardReader                2.6.1
    com.apple.driver.AppleIRController        303.8
    com.apple.iokit.SCSITaskUserClient        2.6.8
    com.apple.iokit.IOAHCIBlockStorage      1.6.4
    com.apple.driver.AppleUSBHub               4.2.4
    com.apple.driver.AppleFWOHCI               4.7.3
    com.apple.BootCache   31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort             2.1.7
    com.apple.driver.AppleUSBEHCI              4.2.4
    com.apple.driver.AppleUSBUHCI             4.2.0
    com.apple.driver.AppleACPIButtons      1.3.6
    com.apple.driver.AppleRTC        1.3.1
    com.apple.driver.AppleHPET      1.5
    com.apple.driver.AppleSMBIOS                1.7
    com.apple.driver.AppleACPIEC 1.3.6
    com.apple.driver.AppleAPIC      1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
    com.apple.security.sandbox       1
    com.apple.security.quarantine  0
    com.apple.nke.applicationfirewall           2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
    com.apple.driver.AppleProfileReadCounterAction           17
    com.apple.driver.AppleProfileTimestampAction               10
    com.apple.driver.AppleProfileThreadInfoAction               14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction       10
    com.apple.driver.AppleProfileCallstackAction    20
    com.apple.iokit.IOSurface           74.2
    com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
    com.apple.iokit.IOSerialFamily   10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
    com.apple.driver.AppleMultitouchDriver             207.11
    com.apple.driver.DspFuncLib     2.0.5f14
    com.apple.iokit.IOAudioFamily  1.8.3fc2
    com.apple.kext.OSvKernDSPLib                1.3
    com.apple.driver.AppleSMBusController              1.0.10d0
    com.apple.iokit.IOFireWireIP     2.0.3
    com.apple.iokit.AppleProfileFamily         41
    com.apple.driver.AppleHDAController   2.0.5f14
    com.apple.iokit.IOHDAFamily     2.0.5f14
    com.apple.iokit.IO80211Family  320.1
    com.apple.iokit.IONetworkingFamily      1.10
    com.apple.driver.IOPlatformPluginFamily            4.7.0a1
    com.apple.driver.AppleSMBusPCI           1.0.10d0
    com.apple.driver.AppleBacklightExpert 1.0.1
    com.apple.iokit.IONDRVSupport              2.2
    com.apple.driver.AppleSMC       3.1.0d5
    com.apple.driver.AppleThunderboltEDMSink     1.1.1
    com.apple.driver.AppleThunderboltEDMSource               1.1.1
    com.apple.kext.ATI6000Controller           6.3.6
    com.apple.kext.ATISupport        6.3.6
    com.apple.iokit.IOGraphicsFamily            2.2
    com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
    com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
    com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
    com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
    com.apple.driver.AppleUSBHIDKeyboard             141.5
    com.apple.driver.AppleHIDKeyboard     141.5
    com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
    com.apple.iokit.IOBluetoothFamily         2.4.5f3
    com.apple.iokit.IOUSBMassStorageClass              2.6.7
    com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
    com.apple.iokit.IOUSBHIDDriver               4.2.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
    com.apple.iokit.IOBDStorageFamily        1.6
    com.apple.iokit.IODVDStorageFamily     1.6
    com.apple.iokit.IOCDStorageFamily        1.6.1
    com.apple.driver.AppleUSBMergeNub 4.2.4
    com.apple.driver.AppleUSBComposite  3.9.0
    com.apple.driver.XsanFilter        402.1
    com.apple.iokit.IOAHCISerialATAPI         1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
    com.apple.driver.AppleThunderboltNHI               1.2.6
    com.apple.iokit.IOThunderboltFamily    1.4.9
    com.apple.iokit.IOFireWireFamily            4.2.6
    com.apple.iokit.IOUSBUserClient             4.2.4
    com.apple.driver.AppleFileSystemDriver              2.0
    com.apple.iokit.IOAHCIFamily    2.0.6
    com.apple.iokit.IOUSBFamily     4.2.4
    com.apple.driver.AppleEFIRuntime         1.4.0
    com.apple.iokit.IOHIDFamily      1.6.6
    com.apple.iokit.IOSMBusFamily                1.1
    com.apple.security.TMSafetyNet             6
    com.apple.kext.AppleMatch      1.0.0d1
    com.apple.driver.DiskImages     289
    com.apple.iokit.IOStorageFamily              1.6.3
    com.apple.driver.AppleACPIPlatform     1.3.6
    com.apple.iokit.IOPCIFamily       2.6.5
    com.apple.iokit.IOACPIFamily    1.3.0
    System Profile:
    Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
    Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
    Serial ATA Device: OPTIARC DVD RW AD-5690H
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Officejet Pro 8000 A809, 0x03f0  (Hewlett Packard), 0x3612, 0xfd140000 / 5
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x850b, 0xfa200000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfa130000 / 5
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfa132000 / 8
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0xfa111000 / 6

    There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
    You might now create a new temporary user account. Log into the new account. Do the panics still occur?
    I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

  • I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

    I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

    The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
    To change your login password read OS X Mavericks: Reset a login password
    also OS X Mavericks: If you forget your login password

  • HT4796 Are there other things that need to be done for the Mac and the PC to link up.  Mine are on the same network.  I have enabled sharing.  The PC does see the Mac in its network but they just won't link up.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

  • I have 2 macs and 2 PC laptops in my home wireless network.  Can I use the Airport/Time Capsule hard drive to back up all 4 machines?  I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

    I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport).  I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers.  Is this possible?  Could someone help me by telling me how to configure it?  I know I will have to use different backup software in the 2 Windows 7 Laptops?  Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image?  Thanks in advance for the help

    It is your fault, pondini.. all your fault.
    I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
    I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
    I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
    A product like clonezilla, Free linux boot cd.
    http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
    Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
    My bet is that it will kill TM .. but you could be right.
    It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

  • I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    Under Network Preferences, select the WiFi
    click on "Advanced..." button
    Select the network you want to delete from the list and click on "-"
    Click "Ok"
    Click "Apply"
    Well done ;-)
    You may also want to delete the wireless key from Keychain.
    Open Keychain, seach for the old wifi network name, slect it and click delete

Maybe you are looking for

  • 7.4 raw update not showing up in PSE 11

    How do I get it to work?  I updated but it is still showing version 7.1 in PSE and I need the upadate to work with raw files from my camera.

  • How to create infotype 1001

    Hi experts, I am doing some configuration in accouting and an error pops up indicating infotype 1001 is not maintained. As I know very little about HR module so I just try to create infotype 1001 in PA30 but turn out it can not be maintained there. C

  • My iphone could not be activated because the activation server is temporarily unavailable

    my iphone could not be activated because the activation server is temporarily unavailable.

  • Error with layers

    hey guys, i am soing some work here and i have a problem. i created a layer under my main layer that is used as a background , but there is an ugly effect , how fix that? it looks like the letters have an white stroke http://imageshack.us/scaled/land

  • Join issue OBIEE (BMM Layer)

    Hi All - 1. I have following tables: D1 - Dimension Table D2 - Dimension Table D3 - Dimension Table F1 - Fact Table We have join between - D1 - F1, D2, F1 & D3 - F1 2. We have some more tables : D4 - dimension Table F2 - Fact Table We have join betwe