21.5 Imac screen is blurry and out of focus

I have a Imac 21.5 3.06 ghz intel core i3 which I got about a week ago and I just noticed that the monitor is going out of focus more and more. I have a second monitor hooked up and the images look fine on it and the resolution on both are almost the same I checked universal for zoom and it is off. This is becoming a real issue as I edit photos for clients on this system. What do I need to do to fix this issue.

OK, well that' really strange because that is the correct resolution (native resolution) to be running.
LCD monitors can't go out of focus if they are running at native resolution from a digital input. It's really hard to say what you are dealing with without actually seeing the display, which obviously can't be done from within a forum. You may need to take it to an Apple Store and compare it to others on the floor.

Similar Messages

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • Why is text become blurry and out of focus?

    Why is text become blurry and out of focus?

    I am confused what device you are talking about. You question is here in the Using iPhone section, but it is marked for your MacBook Pro running iOS 6? If you are talking about an iPhone and you never update your profile to say you are running iOS 7, I would blame the paralax feature that slightly zooms into your picture, making certain low-res photos look extra blurry. Hope this helps.

  • Every video produced by Premier Elements 11 is blury and out of focus.

    When I try to create a video with Premier Elements 11 and an MTS file from my video camera, the resulting videos are blurred and out of focus. The MTS is clear and looks good. Plays on any supported video player. Have tried to convert to AVI as well as creating DVD with the same results. This is the case with any input file, not only one. How can I get a focused, clear video?

    scarboro98
    The answers are in the details.
    What computer operating system is your Premiere Elements 11 running on?
    What are the properties of these .mts source files
    Video compression
    Audio compression
    Frame size
    Frame rate
    Interlaced or Progressive
    File extension
    Pixel Aspect ratio
    What is the brand/model/setting of the camera recording the source media?
    What are you or the project setting as the project preset (which should match the properties of the source media)
    See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio (even if they appear to be grayed out)
    When you are viewing the Timeline content in the Edit area monitor is the playback blurry and out of focus?
    Or is the blurry and out of focus only in your exports? If only in exports, then we need to dig into your export choices in Publish+Share/.
    Is your computer optimized and is your video card/graphics card driver up to date according to the web site of the manufacturer of your video card?
    Let us start here and then decide what next.
    Any questions or need clarification on anything written, please do not hesitate to ask.
    Thank you.
    ATR

  • My iMac screen is flickery and bleached out

    my iMac screen is flickery and bleached out it started suddenly and wont stop

    Probably the GPU or display is damaged. If you can control the iMac, turn it off, and if not, hold the Power button until it turns off. Then, turn it on again. Does the error appear again?
    Remember that GPU problems appear and disappear randomly. If the computer is working properly after turning it on, the problem will reappear later. I suggest you to take the Mac to an Apple Store or reseller to get it repaired. Depending on the iMac you have and if it's the GPU or display, the repair will be more or less expensive

  • IMac Display stretched and out of focus

    My iMac display is not right. It is slightly enlarged and out of focus. I have already tried the display settings and holding the control key and scrolling down. I also tried restarting. Nothing is working. Last night I tried configuring my router for wireless. I supposedly made it secure with a password, which I had to use to connect to my network. The screen thing happened after that. This morning I checked the connection again and the little lock icon was no longer there. Could the two be related? Please help! I am obviously not very apt with computers, but I'm trying.

    This resolved my issues:
    Preferrences >  Accessibility > Zoom 
    then, uncheck Zoom and uncheck Zoom follows keboard focus. 
    Wait a few minutes.  You can rechec them again but it won't go back to the stretched and out of focus look.  I don't know why.

  • Display suddenly changed I have tried changing in utilities but nothing works.  The print is enormous and out of focus the screen has shrunk in width but programs open too stretched in length? What can I do?

    The display suddently changed two days ago.  Everthing exploded in size.  I have tried changing the contrast but nothing works.  The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus.  What can I do please   I am really disappointed since my iMac is only 2.5 months old.

    Don't think so.  But tried it anyway.  I have been into utilities and tried different contrast settings now I don't know what is the right one.  But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black.  What is going on?
    Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
    Any ideas Capt?

  • Imac screen stays black and chimes when started

    My iMac screen stays black and chimes when started.

    Impossible to help if you don't at least fill out a profile that tells us which iMac you have, what version of OS X is installed, how much RAM the system has etc....

  • Screen is blurry and shaking.

    I always turn my iPhone off every night. And this morning my iPhone 4s screen is blurry and kind of shaking. What am I suppose to do? because I never dropped my phone or get any waters to it.Also my signal bar and the battery bar is kind of cut into half and I don't know why. IOS is 7.1. Thanks

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • My imac screen is cloudy, and it doesn't go away even after i've left it on for hours.

    my imac screen is cloudy, and it doesn't go away even after i've left it on for hours.

    Read this
    http://support.apple.com/kb/ht1808

  • My iMac screen goes bright and dim randomly, any idea why?

    my iMac screen goes bright and dim randomly, any idea why?

    Sounds like a power issue.
    Try Resetting the System Management Controller (SMC)

  • When using video camera on iPad 3 screen keeps going in and out of focus

    Every time I use my video camera the image goes in and out of focus making the blurry there seems to be no settings to stop this help.

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • IMac screen flashes black and white when returning to top sites or screen saver

    iMac screen flash black and white when returning to top sites or before sleep...any ideas why?

    Howdy OatsaMae,
    It sounds like your screen is flashing unexpectedly on you for some reason. I would recommend this section from the following article to help you get that resolved, named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC. 
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • In and out of focus

    I downloaded from Canon HV30 (tape) to iMovie '09. Every 20 seconds or so the picture goes in and out of focus and then back to sharp again. It is a very "soft" focus change but annoying. This continues after editing and sharing to iDVD and burning.
    Could this be a problem with the camera tape not being tight, or could it be something in iMovie?

    Tape tension has nothing to do with it.
    This is a digital camera: if the tape lost tension you'd have no image at all, or a "mosaic" or "blocky" image because of missing chunks of data.
    The focus isn't related to the tape at all. It's like moments of blurry eyesight aren't caused by lack of grip on the floor of your shoes!
    It's the camera "hunting" for focus, as explained by AppleMan and Karsten. You may not see this on the camera's own built-in viewfinder monitor ..but that really is the cause.
    The tape's tension, or contact with the tape-head, is not it. If there were poor contact you'd have sporadic loss of both sound and picture ..but not a change of focus.

  • In and Out of focus video. Please help!!!

    I exported my fce movie to a quicktime movie (which looked fine on the computer) and then imported to idvd ( which stilled looked fine on my computer) and burned it to a dvd to play on TV and then the video goes in and out of focus when the Lacrosse players move. Why does this happen??

    Hi - my notes on this - might be of help
    *FCE/P to iDVD*
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    *How to go from FCE/P to iDVD I do*
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
    • Save out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not self-contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    *Free space on Start-up hard disk*
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    *Brand and type of DVDs used*
    • I use Verbatim
    • I use DVD-R
    *Burn speed set*
    • I set down this to x4 (or x1)
    *iDVD BUG*
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    *Use of Chapters*
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it stlf
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    *Material used to build movie*
    • video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
    Yours Bengt W

Maybe you are looking for

  • I am trying to create the store procedure but it is returning the following error what can I do.

    USE [PHPExtracts] GO IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[pr_Extract_wt_569_OPTUM]') AND type in (N'P', N'PC')) BEGIN DROP PROCEDURE [dbo].[pr_Extract_wt_569_OPTUM] PRINT '--- Procedure [dbo].[pr_Extract_wt_569_OP

  • Free goods+ discounted item

    Hello all, Could you help in configuring the scenario wherein : <b>.</b> we give a shirt free on purchase of two shirts and a discounted price of 30% on the pants. i.e. 1 item free on purchase of 2 and the 3rd item at discounted rate. If not clear pl

  • Selection of BOM During MRP

    Dear All, I have three alternatives of BOM.The lot size and the validity period for all the boms is same.Now during MRP Run the system only selects the first alternative and plans the depending materials of that BOM. I want to set the system in such

  • Apalling Performance

    Well I have tried as many reasonable things as I can and have to say that the product performs abysmally. Stoping and starting a web server process or database process should take seconds on machines that run at several GHz and have hundreds of Meg o

  • Trouble putting videos in iTunes

    I cannot click and drag movies into my itunes...it does nothing, this just recently started when i installed itunes 7. I know the movies work because they have been on my ipod before. I've tried going to File>Add to library, I've tried opening my ext