21.5in iMac 2011 -Display Help

Today I bought a secondary 21.5in HP Monitor for my iMac. (Dual Display Setup)
Currently neither my iMac (OSX MNT Lion) or the display can see each other. I am using a Belkin Thunderbolt to HDMI connector and then an HDMI to DVI-D cable. Is there something wrong with my setup? Or do I just have some settings configured incorrectly?
Methods Ive Tried:
Detect Displays
CMD + Option + P + R
PRAM Reset

Here is the Apple version:
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter

Similar Messages

  • Screen is permanently black on my iMac 2011, need help

    Hi guys, I have an iMac 2011 21" and it works really great, I have bootcamped it for some games which also works great. But today I when I was rebooting to Windows after I had updated the Mac a problem occured. As the computer shut down in Mac mode the screen went black as normally, and it began starting in Windows mode, the startup sound came as normal but the screen stayed black. I waited for a few mins and it remained black. I restarted it and the startup sound came as usual but again, no lights. The computer was pretty hot when i felt it also, could that be a cause? I tried removing the loadcable completely for like 10 mins and started it again, same problem. I also can't see anything on the screen if i have light from a flashlight, I tested the Alt + CMD + P + R combo and it didn't work. Tested to put the Mac disc in and press C at startup, didn't work.
    And also, the computer is working, because I can hear sounds (lower and higher the volume) and i pressed some keys and then Enter, and the "failure" sound came. Also, I'm not 100 % sure if the computer is in Windows or Mac at the moment, even though it was going to boot in Windows, it feels like it's in Mac, because there were no Windows sounds.
    Please help me, thanks in advance!
    - Axel

    Try booting up in  Safe Mode , it will take longer than normal but does stuff during that time. If it isn't on in a couple of minutes we have a problem. If safe mode doesn't help try this reset:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.
    If that doesn't help you may be experiencing a video failure.

  • Kernal Panic: iMac 2011: Please help.

    Hi, everyone,
    A few months ago, a friend's iMac started to crash during random events. Sometimes while on Facebook, sometimes while just surfing the Internet, and sometimes just word processing. I wrote about it in this thread: https://discussions.apple.com/message/19560212?ac_cid=op123456#19560212
    He brought it to Apple Genius at Apple Store here in town. The Genius ran it through a series of hardware checks and a stress test and couldn't recreate the issue. His only advice was "to shut down once in a while."
    Sure enough, the panics continued to happen, always for a different reason. I finally suggested to my friend after some tests from the above thread, to do a Erase and Install of the operating system. This seemed to have fix the issue, but sure enough, the panics resurfaced. Yesterday, the machine had four panics in one day. At this point, I think my friend should take it back to the Apple Store, speak with a Genius and ask them to review all these logs. Basically, making sure he doesn't leave the store until they agree to take a real look at the computer. At this point, he has 10 to 12 crash logs. Here is the latest one:
    Any advice would be appreciated.
    Fri Nov  2 20:13:03 2012
    panic(cpu 1 caller 0xffffff80002251fb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x9, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/x86_64/pmap.c:2741
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80601738a0 : 0xffffff8000204d15
    0xffffff80601739a0 : 0xffffff80002251fb
    0xffffff8060173a10 : 0xffffff800022691f
    0xffffff8060173a90 : 0xffffff800021b545
    0xffffff8060173b00 : 0xffffff80002184b1
    0xffffff8060173c00 : 0xffffff80002188b3
    0xffffff8060173c30 : 0xffffff80002a6813
    0xffffff8060173d40 : 0xffffff800027522f
    0xffffff8060173e10 : 0xffffff8000292b1b
    0xffffff8060173e50 : 0xffffff8000205536
    0xffffff8060173e80 : 0xffffff80002029eb
    0xffffff8060173ef0 : 0xffffff8000274176
    0xffffff8060173f60 : 0xffffff80002c3095
    0xffffff8060173fa0 : 0xffffff80002e4894
    BSD process name corresponding to current thread: Finder
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: iMac12,1 (Mac-942B5BF58194151B)
    System uptime in nanoseconds: 16612190045998
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI          4.2.5 (addr 0xffffff7f81316000, size 0x65536) - last unloaded 80663980052
    loaded kexts:
    com.apple.driver.AGPM          100.12.31
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          2.0.8f3
    com.apple.driver.AppleMikeyDriver          2.0.8f3
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.26
    com.apple.kext.ATIFramebuffer          6.4.2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AirPort.Atheros9388          426.35.3
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleBacklight          170.0.48
    com.apple.kext.AppleSMCLMU          1.5.2d10
    com.apple.ATIRadeonX3000          6.4.2
    com.apple.driver.AppleIntelHDGraphics          6.4.2
    com.apple.driver.AppleIntelSNBGraphicsFB          6.4.2
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleIRController          303.8
    com.apple.iokit.SCSITaskUserClient          2.6.9
    com.apple.driver.AppleUSBCardReader          2.6.1
    com.apple.iokit.IOAHCIBlockStorage          1.6.6
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleUSBHub          4.2.5
    com.apple.driver.AppleFWOHCI          4.7.7
    com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort          2.2.0
    com.apple.driver.AppleUSBEHCI          4.2.6
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleBluetoothHIDKeyboard          141.5 - last loaded 19029232923
    com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
    com.apple.driver.AppleHIDKeyboard          141.5
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.driver.DspFuncLib          2.0.8f3
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOFireWireIP          2.0.4
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.driver.AppleHDAController          2.0.8f3
    com.apple.iokit.IOHDAFamily          2.0.8f3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.ApplePolicyControl          3.0.17
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleGraphicsControl          3.0.17
    com.apple.driver.AppleBacklightExpert          1.0.2
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.AppleThunderboltEDMSink          1.1.3
    com.apple.driver.AppleThunderboltEDMSource          1.1.3
    com.apple.kext.ATI6000Controller          6.4.2
    com.apple.kext.ATISupport          6.4.2
    com.apple.iokit.IONDRVSupport          2.2.1
    com.apple.iokit.IOGraphicsFamily          2.2.1
    com.apple.driver.AppleThunderboltDPOutAdapter          1.5.9
    com.apple.driver.AppleThunderboltDPInAdapter          1.5.9
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.9
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.9
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.iokit.IOUSBHIDDriver          4.2.5
    com.apple.iokit.IOAHCISerialATAPI          1.2.6
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.9
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.9
    com.apple.driver.AppleUSBMergeNub          4.2.5
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.driver.XsanFilter          402.1
    com.apple.driver.AppleThunderboltNHI          1.3.2
    com.apple.iokit.IOThunderboltFamily          1.7.4
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOFireWireFamily          4.2.7
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.7
    com.apple.iokit.IOUSBFamily          4.2.6
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.8
    com.apple.iokit.IOACPIFamily          1.3.0
    Panic(CPU 0): Unresponsive processor, TLB state:0
    RAX: 0x0000000000301005, RBX: 0xffffff800be1e000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff805a9d3dd0, RBP: 0xffffff805a9d3de0, RSI: 0xffffff7f810167e0, RDI: 0xffffff800be1e000
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80004f4ece
    R12: 0x0000000000000000, R13: 0xffffff800085ae38, R14: 0xffffff7f80ffbfa6, R15: 0xffffff800dad56b8
    RFL: 0x0000000000000246, RIP: 0xffffff7f812f2119, CS:  0x0000000000000008, SS:  0x0000000000000010
    Backtrace (CPU 0), Frame : Return Address
    0xffffff800010bf50 : 0xffffff80002d76f6
    0xffffff800010bf80 : 0xffffff80002d0322
    0xffffff800010bfd0 : 0xffffff80002e40d2
    0xffffff805a9d3de0 : 0xffffff7f812f239a
    0xffffff805a9d3e60 : 0xffffff7f80ffbd5b
    0xffffff805a9d3f10 : 0xffffff7f80ffc08d
    0xffffff805a9d3f30 : 0xffffff800053e46d
    0xffffff805a9d3f60 : 0xffffff8000285b66
    0xffffff805a9d3fa0 : 0xffffff80002c8527
          Kernel Extensions in backtrace (with dependencies):
             com.apple.driver.AppleUSBEHCI(4.2.6)@0xffffff7f812ec000->0xffffff7f81303fff
                dependency: com.apple.iokit.IOUSBFamily(4.2.6)@0xffffff7f80fdd000
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
             com.apple.iokit.IOUSBFamily(4.2.6)@0xffffff7f80fdd000->0xffffff7f81016fff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
          Kernel Extensions in backtrace (with dependencies):
             com.apple.driver.AppleUSBEHCI(4.2.6)@0xffffff7f812ec000->0xffffff7f81303fff
                dependency: com.apple.iokit.IOUSBFamily(4.2.6)@0xffffff7f80fdd000
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
    BSD process name corresponding to current thread: kernel_task
    Panic(CPU 3): Unresponsive processor, TLB state:0
    RAX: 0x00000000ffffffff, RBX: 0x0000000000000002, RCX: 0xffffff800bb07460, RDX: 0xffffff805a9c505c
    RSP: 0xffffff806069bc60, RBP: 0xffffff806069bc70, RSI: 0xffffff8060635000, RDI: 0xffffff804b867004
    R8:  0x0000000000000001, R9:  0x000000000000012c, R10: 0x0000000000008000, R11: 0x0000000000000033
    R12: 0x0000000000002710, R13: 0x0000000000007000, R14: 0xffffff804b867004, R15: 0x0000000000000000
    RFL: 0x0000000000000286, RIP: 0xffffff7f80bfbf47, CS:  0x0000000000000008, SS:  0x0000000000000000
    Backtrace (CPU 3), Frame : Return Address
    0xffffff805aa32f50 : 0xffffff80002d76f6
    0xffffff805aa32f80 : 0xffffff80002d0322
    0xffffff805aa32fd0 : 0xffffff80002e40d2
    0xffffff806069bc70 : 0xffffff7f80bd8d9a
    0xffffff806069bce0 : 0xffffff7f80c25dbb
    0xffffff806069bd00 : 0xffffff7f80c25e45
    0xffffff806069bd20 : 0xffffff7f80c26e37
    0xffffff806069bd90 : 0xffffff7f80bd26ab
    0xffffff806069be20 : 0xffffff7f80bcae57
    0xffffff806069be60 : 0xffffff7f80bfd4d8
    0xffffff806069be80 : 0xffffff7f80bc8865
    0xffffff806069beb0 : 0xffffff7f80b84821
    0xffffff806069bed0 : 0xffffff800053be3c
    0xffffff806069bf10 : 0xffffff800053b31f
    0xffffff806069bf60 : 0xffffff800053afc5
    0xffffff806069bfa0 : 0xffffff80002c8527
          Kernel Extensions in backtrace (with dependencies):
             com.apple.driver.AirPort.Atheros9388(426.35.3)@0xffffff7f80b6d000->0xffffff7f80 cb7fff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
                dependency: com.apple.iokit.IO80211Family(320.1)@0xffffff7f80b48000
                dependency: com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80b2e000
          Kernel Extensions in backtrace (with dependencies):
             com.apple.driver.AirPort.Atheros9388(426.35.3)@0xffffff7f80b6d000->0xffffff7f80 cb7fff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
                dependency: com.apple.iokit.IO80211Family(320.1)@0xffffff7f80b48000
                dependency: com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80b2e000
    BSD process name corresponding to current thread: kernel_task

    It's a hardware fault. To reproduce the issue at the Apple Store, the hardware configuration must be the same, including any wired peripherals.

  • Using iMac 2011 to display a PC

    Dose anyone using iMac 2011 to display a PC by Mini displayport to VGA(or DVI) cable!
    I used a Mini displayport to VGA cable and press commead+F2 button, but it was nothing happen.
    that is the cable I've used.
    http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg
    Should I change other cable? or it just can't be work!!
    Tks,

    You cannot use a 2011 iMac in Target Display mode.
    Target Display only works with the 2010 iMac.

  • Is it possible to use a iMac(2011)as display while mac mini is using windows7?

    i have a imac 27‘（2011）running mountion lion,my new mac mini is runnning OSX and windows7 on bootcamp.
    i can use imac as display when mac mini using OSX,but when mac mini switch to windows,command+f2 dose not work?
    is it possible to connect like that?

    Hmmmm, see if this works...
    http://techtips.salon.com/use-imac-pc-monitor-1648.html

  • Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

    hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

    anas guellaf wrote:
    it still make 3 bips before starting the IMAC.
    That is another problem not related to the Mac OS X version you are trying to use.
    Three beeps at startup means you have a bad ram module in the computer.  Did you install the ram or did it come from another owner this way?  The first problem you need to solve is the bad ram.
    When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory?  If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
    On the bottom of the screen there should be a small door that you can remove with a small screw driver.  You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules.  You can then put two in (if it has four) and see if it starts without the beeps.  Do that with each module so you find out which is bad.  Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
    Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours.  So, you need to talk to Apple and have them send the DVD for your particular iMac.

  • New imac ex-display model- can't seem to set up- please help

    Hi Guys
    Apologies if im being stupid, but I've just bought an IMAC from Comet (UK Electrical retailer), it was the last one in stock and therefore the shop assistant simply turned off the imac on display and boxed it up.
    I got it home, turned it on and seem to be in this demo-mode continously.
    I setup internet (wireless) etc and installed my microsoft office software and began transfering a load of files including my itunes library from my old PC.
    Anyway, it was time for bed so i put the mac into sleep mode. then decided to turn it back on quickly to allow the file transfer to continue through the night.
    However, when i turned it back on, it just went back into the shop demo mode and ive lost everything i'd done e.g. internet connection, office, itunes etc.
    Its as if the computer is still in the shop demo mode and i cant get out of it.
    HELP!!
    Cheers

    Quick update on where I'm at.
    I tried to restore but the CDs were rejected by the computer, so I rang up Apple who said that the retailer must have given me the wrong disks with my imac. I then re-boxed the imac and took it back to comet where, after scanning the CD bar code, confirmed that they had given me the wrong disks. The salesman went off to try and find the correct CDs for my imac but could not find them! Turns out i was given the wrong box aswell, which explains why the cds are not-compatible with my machine. Ive got to order some new disks from apple, which ive done (takes 10-15 business days), and comet have given me £100 back to cover costs..
    im a bit annoyed but both apple and comet have been pretty good about the whole thing so fingers crossed all will be resolved once i get my new disks..
    Thanks for your help.

  • New imac 2011 27" intel core i7 2600, 4gb ram, 2GB vram amd radeon HD 6970m, help!!!!

    HI, I just bought that imac 2011 27", and I would like to know the frame rate for videogames as call of duty black ops, max settings and 2560x1400, thanks

    its 2560x1440.
    I used to play Black Ops, Max settings i was getting 30minimum but mostly around low 40's.
    Battlefield Bad company is around 60fps on high.

  • Has anyone tried driving two external monitors (3 total displays) on the iMac 2011 through the thunderbolt ports on Windows 7 Bootcamp?

    I would love to purchase an iMac 2011 with the Thunderbolt ports, but I need to occasionally boot to Windows 7 Bootcamp.
    I imagine this will work in general... but has anyone tried driving two external monitors using the Thunderbolt ports in Windows 7 Bootcamp?
    Thanks in advance!
    Ralph

    Hi,
       I am trying to get this working at the moment. both monitors are fine in Lion but I am losing the second monitor in windows. I will update you when I get it working.

  • How to turn iMac 2011 to a TV to play XBox360

    Hi there,
    Is there any way to turn iMac 2011 to a TV to play XBox 360 or PS3 ?

    Sorry no.
    ThunderBolt iMacs only take video-input and can be used as dsplays from other ThunderBolt Macs.
    Thunderbolt 10.6 Help: Using another Mac as an external display
    Stefan

  • How to install latest ATI drivers for iMac 2011 with BootCamp and Windows 7?

    Hi,
    i want to install the latest ATI / AMD drivers for my brand new iMac 2011 6970M 2GB under windows 7 to play GAMES (<- one of the reasons to buy a new mac)
    What I tried:
    1.: Update with latest mobilty driver vom amd. -> doesn't work.
    2.: Uninstall all amd software (driver sweeper)
         Install the latest drivers... -> doesn't work.
    What should i do? Buy a PC?
    thx

    I installed other driver and it works fine for me. :
    http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-6-display-drivers-notebooks-15-06-2011-a.html
    ATI 11.6 Catalyst drivers...
    Thx for help.

  • 3.1Ghz i5 iMac 2011 with OSX Lion GPU running very hot (80C) when running secondary monitor via thunderbolt

    Using 3.1Ghz i5 iMac 2011 with 6970M and OSX Lion 10.7, I'm having this temperature issue on the GPU diode where it was hovering around 80C on just normal task (browsing web). From iStat I noticed that the Graphic Module was taking full 33W even though I was just browsing.
    But I did have a secondary display running at 1920x1080 via the thunderbolt port. The moment I disconnect it the Graphic Module drop to 15W and the GPU diod drop to around 60C.
    So was it caused by the thunderbolt? Why does running external monitor taxing the GPU so much?

    Try resetting the SMC and see if that helps. On occasion it takes 2-3 resets for it to "take."
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How can I connect my TV sony bravia to Imac for display !

    How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

    I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

  • HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

    My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
    Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
    Process:         SafariDAVClient [5937]
    Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
    Identifier:      SafariDAVClient
    Version:         106
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [202]
    Responsible:     SafariDAVClient [5937]
    User ID:         501
    Date/Time:       2014-02-02 15:40:22.026 -0800
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
    Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
    Crashed Thread:  0  Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
    As well, my iCloud Pref Pane will not open!
    What the HECK is goin' on?

    feckinHell wrote:
    As well, my iCloud Pref Pane will not open!
    That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
    Try this:
    Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
    ~/Library/Caches/com.apple.iCloudHelper
    Drag that entire folder to the Desktop.
    Quit Safari.
    Attempt to open iCloud Preferences again. If it opens de-select Safari.
    Launch Safari again and determine if the problem is fixed.

  • After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

    after upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.
    all my email accounts, all my emails, all my folders & subfolders (received & sent) ... everything.
    help!

    Remove Adobe plug ins if any.
    Macintosh HD > Library > Internet Plug-ins
    AdobePDFViewNPAPI.plugin
    AdobePDFView.plugin

Maybe you are looking for

  • Using video clips with my ipod

    I am working on a project that requires me to use video clips on my ipod(I have a video ipod). I would like to divide each clip(about 10-20 seconds each) into approximately 10 categories. There would be about 100-200 clips in all. I would like to be

  • Regarind  CCMS Alert configuration in XI/PI

    Hi Experts, 1) I have created distribution list “DIS_LIST ” in default client 000, in between I have assigned SAP Userids with e-mail ids in SU01 of normal client 001. 2) In normal client 001:  Goto RZ21-> methods -> Display Overview -> The method i

  • Mein i photo startet nicht mehr

    Wenn ich mein I Photo starte hängt sich mein MAC sofort auf und es wird eine leere Seite von I Photo angezeigt. Geht nur zu stoppen - mit SOFORT BEENDEN.

  • My emails use most of my data allowance how can I limit that?

    I have un check image loading, but I seem to be using 100MG per half day, what am I doing wrong?

  • Mplayer tv and audio

    I've installed mplayer to use my Haupt. saturn%mplayer -ao pulse -tv device=/dev/video0:input=0:normid=0:chanlist=us-cable:alsa:immediatemode=0:audiorate=48000:amode=1:adevice=hw.1,0 -vo x11 tv://37 MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team