210-4125 will not boot when windows 7 x64 is installed

i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
hoping that some one new might have had the same problem
HP.......................................HP MINI PC 210-4125
model ................................210-4125
Bios ...................................F08
ser no................................ [edited Serial Number by Moderator]
product no.........................A8V56EA#ABU
Ram ..................................4.0 GB
system board ID............... 338d
processor .........................Atom(TM) CPU N2800 1.86GHz
Product configuration ID..0797200000204600000300100
acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
and i get a message on black screen "you are trying to load an opperating system not compatable" or some thing like that
it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
if any one out there is running x64 bit windows 7 on the 210-400 range of netbook can you tel me
1. model no
2.CPU
3.Ram installed
4 bios No
thank you
JB

thank you George
i will bear that in mind next time
i see that you work for HP ? do you have any suggestion's for my problem ?
as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded , but i can not keep the drive connected ?
i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment , i think it is locked out from out side the bios and not from inside.?
any pointers in the right direction would be very helpful ,
many thanks
John

Similar Messages

W520 will not boot when docked; blue screen

W520 fails to boot 100% of the time when docked. Blue screen shows SYSTEM_SERVICE_EXCEPTION, STOP x0000003B for nvlddmkm.sys
nvlddmkm.sys is the NVIDIA driver, which is version 8.17.12.9620, the latest shown on the NVIDIA and Lenovo websites. BIOS is also the latest.
Systems boots fine if I remove it from the dock, but it will not boot when docked.
Windows 7 PRO SP1
2 external monitors via DVI
Any suggestions?

Boot with Option held down. After the cursor changes to an arrow, Command-. (Command Period) should open and close the optical drive. After you insert the disc, click the curved arrow to have it re-scan the discs for boot volumes. Then select the optical drive and click the straight right-pointing arrow to start.
Try it with the Apple Hardware Test disc first and run Extended Tests.

Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w...
Hi,
just recently upgraded to Win Pro on my HP PAVILION A6109N. I also bought a toshiba canvio desk 3TB. What I notice is that if I reboot my pc with the extermnal HDD connected, my system will not boot.
I have check my BIOS boot settings and the order of the boot.
I have tried disabling USB Legacy Support in the BIOS
I have reformatted the external HDD
but still my desktop will not boot if the external HDD is connected....If I disconnect the external HDD...the system will boot up ....
I am at a loss....*** scratching my head ***

Update: The only solution for me was to format the drive as ext3 and plug it into one of my Asus RT-N66U USB ports, as most routers don’t yet recognize 3TB drives as NTFS. It’s not much help to people who don’t have a router with this capability, and it also slows transfer rates to ~12MB/s.
Given the short length of the cable, your only other options are to have the 3TB Canvio sitting right next to you so you can unplug from a front USB port before each boot, or place it towards the rear of your desk and crawl under the desk to disconnect it from your PC prior to each boot.
It's a pity because Toshiba produce great internal HDD's, but my experience when it comes to external drives is they're simply junk. I wish I had read the reviews before purchasing.

Machine will not boot into Windows!!

I formatted a 32 GB partition in NTFS, then successfully installed Windows XP Pro along with Leopard Bootcamp drivers. All was well. And then I tried to restart.
I held the "Option" key until the Mac OS and Windows drives showed. Selected the Windows drive and clicked on the arrow. Nothing happened except for the cursor freezing in position and the drive eventually spinning down. A light touch on the power button shut the machine down.
I have tried selecting the Windows drive as the default startup disc in System Preferences, no dice.
What have I done wrong? What can be done to repair the issue? I need help, wife about to start throwing stuff
All the best,
Chumpy

Odd thing I noticed. When installing the Windows XP Pro, new full installation disc, not repair disc, I had to shut down before installing the Leopard disc and loading Bootcamp and Leopard drivers because I ran out of time. The machine booted right into Windows the next time I tried. Then, after loading Bootcamp and drivers off Leopard disc the machine will not restart into Windows.
I have tried to do it by selecting it as the default drive and by pressing "Option" and selecting the Windows drive. Neither approach does anything. Literally. The optical drive and the harddrive eventually spin down and the machines white screen is frozen.
So, I have redone the partition in Bootcamp Assistant. When I try to boot to the installation disc now, it won't go. For some reason this is just not working at all.
Frustrated,
Chumpy

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

System will not boot when Aironet 802.11a/b/g adapter installed

I have an HP 8000 Elite sff that will not boot after installing the adapter. I am running XP sp3. As soon as I remove the adapter, it boots fine.???

Which adapter ? Aironet 350 or CB21 ?
Do you have another similar adapter to put in the laptop to try ?
Is the problem new ? did it suddenly happen ?
Nicolas.
===
Please rate answers that you find useful

Computer will not boot when I install my Sound Blaster Live Ca

My computer wiil not boot when I put my sound blaster li've card in. Any body have any ideas that I could try?
Thanks
tbaker

Turn off your pc, remove the jumper near the battary for 5 seconds, then put the jumper back.
If it works go to BIOS and switch off (disable) Audio on Board or Sound on Board , (if you have it), then start your pc. Should work !!!
I hope it helps!!!

IBook G3 Will Not Boot - ?/face Icon on fresh install to new hard drive!!

Well, this is my first post here, but I hope someone out there may be able to help me....
I've got this iBook G3, and it will not boot. Originally, I got it and the hard drive was kind of suspect. I was able to install Tiger and use it, but it just stopped booting one day. I figured it was the hard drive, because it wouldn't boot to the OS even when stripped of the extra ram and after a fresh install via target disk mode from my Powermac. So, I changed the drive and reinstalled Tiger. It still won't boot.
Oh, and I've tried resetting the PRAM and resetting open firmware. Any ideas?

^^^I'm installing from a family pack and this is the only computer I'm running Tiger on...all of my others are Leopard. Which, now that I think about it, is another reason that cloning the drive to the iBook wouldn't allow it to boot. However, I know the drive is good at least, because my Powermac can boot from it.
Anyway, I put in a 512 mb stick, and it then will get to the grey Apple screen, where it hangs forever. If I do verbose mode, the last line says "creating RAM disk for /var/run"
It sounds like a RAM problem still. I think I have some actual Apple RAM laying around somewhere (maybe a 128 mb), as the stuff that's in it now is not "Mac Ram," but it is what was working when the computer was working before. I'm still at a loss. I know the method I'm using (restored Tiger DVD to partition on iBook due to a bad optical drive), as I've done it before. In fact, it's even the same image from the last time I did it, as I never deleted the .dmg file.

Computer will not boot when iPod is connected

Hi everyone,
First time Mac user here, so I'm not very experienced when it comes to troubleshooting - there may be a very simple fix for this, but I've searched online and come up with nothing so far.
I've recently bought a 20" Intel-based iMac (Core 2 Duo). I'm using Boot Camp (1.1.2 Beta) to dual boot with Windows. I already owned a 30gb iPod, which has previously been used with a Windows laptop. The iPod has disk mode enabled as I use it for transporting data as well as music and video.
Now that I'm using the iMac as my main comptuer, I keep the iPod docked & connected whenever I'm not out of the house in order to keep it charged & synchronised. However, if the iMac has to restart for any reason (like switching between Mac OS and Windows, or rebooting after a system update), it will not continue booting after making the chime sound. The screen remains white, holding the option key does not display the Boot Camp menu, and no matter how long it's left like this it will not continue to boot either OS. Pressing the Power button causes the computer to immediately switch off. Turning it on again after removing the iPod from the dock results in it booting normally.
Has anyone had any similar experiences?
Thanks

hi xJamez
Welcome to Discussions
Because you said you use the iPod as an external hard drive, I am going to assume that it's not a nano, shuffle, or mini. What I suspect is that the computer is trying to boot from the iPod because the iPod actually has a hard drive in it, and the iMac thinks that it's an external hard drive that it can boot from. In the future, I would disconnect the iPod before each time you shut-down or restart your iMac.
Hope this Helps
Trevor

Mac OSX will not boot, when I log in, it shuts down after grey screen and grey loading bar show up: PLEASE HELP (:

So here is a lowdown on my problem.
I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted"). Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual. I enter my password, hit the enter button (like I always do), and this is where my problem begins.
After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath. This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down.
No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
NONE of the startup/boot commands work except holding the alt/option key. I can't hold: Command plus r; command pr to reset PRAM; shift to enter safe mode.
I really dont know what to do here :/. I have files that I want on the hard drive, that are pretty important but not critical. I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
More information that may be helpful:
          I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
          My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
          The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open. Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
          Again, boot commands will not work, except for holding the alt/option key.
So if anyone can help me fix my problem(s), which are:
1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
I would love you forever. I would really prefer 1 or 2. Thanks for reading this.

Oh and one more thing, I do not have a disc drive in the mac osx. The version I have comes without one.
I am very puzzled about what to do right now.

Mid 2007 Macbook Pro will not boot from windows 7 DVD

I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

so you did not burn the DVD from ISO? that is what this usually is.
the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
Windows 64 Bit Unsupported Macs
What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
Select CD-ROM Boot Error Apple
CD-ROM Boot Type when installing
Install Windows 7 x64 Mac Select CD-ROM Boot Type

My IMAC will not boot to Windows Vista

I can not get my IMAC to boot to Windows Vista. I restart the computer, hold the option key, and it keeps getting hung up on the blank white screen that comes up when you first turn the computer on. It just sits on this screen forever and never pulls up the two icons that give you a choice of whether you want to boot to the mac side or pc side. If I don't hold the option key down, it boots to the MAC OS just fine.
I've never had this problem before and I haven't made any kind of major changes to the computer that I can think of, since the last time I booted to windows. Any help would be appreciated!

I have asked the Hosts to move your post to the intel forum, you are in the PPC area.

MBP will not boot when a USB/USB2 Device is plugged into either USB port.

MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
"The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of hub @ location: 0x6000000)."
The above error may or may not be related.
........AND BEFORE ANYONE SUGGESTS IT, YES I HAVE ZAPPED THE PRAM and reinstalled the OS from new MBP Install Disks from scratch! Still occurs.
Hope someone can also validate what I've wrote with the newer MBP, as well.
Many Thanks!

JKosh wrote:
MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
I'm having exactly the same problem with my MacBook Pro.
It's either the usb hub or simply the iphone... every time I need to boot my macbook pro I have to disconnect every device. It's getting quite annoying.
The previous 17" Powerbook G4 had no issues.

IPhone will not sync when Windows Vista laptop is offline

Hi there. My iPhone 3GS syncs OK when my Laptop has a wireless connection to the internet but if it is offline, itunes will not recognise my iPhone. It shows up in 'My Computer' as a Mobile device. I have deleted and reinstalled iTunes and quickTime and I have all the latest software.
When I make sure the driver is correctly linked (by following the guidance and going to C:\program file\common files\apple\mobile device support\drivers it says that the driver software is up to date but says it is for a digital still camera. Please can you help me with this as I am unable to alter my iphone content when I am away (and out of a wireless network).
Thanks, John

See http://support.apple.com/kb/TS1538, especiall #1-4 at the bottom.

Office 2007 add-ins will not load on Windows 7 x64

Hi there,
I have a brand new built Windows 7 x64 desktop with Office 2007 32 bit installed. When I install Oracle BI Publisher Desktop 11.1.1.7.0 it loads without errors. Except none of the add-ins will load. I have done the usual Add-ins / Com Add-in / Tick box but nothing.
After further investigation it appears there is a VSTO 4.0 error on the machine when I run the C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNet2007\TBAddin.vsto. The error itself is only failed when it tries to download savexmldata.png from C:/Program Files (x86)/Oracle/BI Publisher/BI Publisher Desktop/DotNet2007/Resources. The fact is there isn't a folder called Resources nor a file called savexmldata.png.
I thought it may be an assemblies error and tried installing the newest versions of Microsoft Office 2007 Primary Interop Assemblies and Microsoft Visual Studio 2010 Tools Office Runtime (x64) but all are up to date.
See below for the error:-
Customization URI: file:///C:/Program Files (x86)/Oracle/BI Publisher/BI Publisher Desktop/DotNet2007_2/ETBAddIn.vsto
Exception: Downloading file:///C:/Program Files (x86)/Oracle/BI Publisher/BI Publisher Desktop/DotNet2007_2/Resources/field.png did not succeed.
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Oracle/BI Publisher/BI Publisher Desktop/DotNet2007_2/Resources/field.png did not succeed. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNet2007_2\Resources\field.png'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNet2007_2\Resources\field.png'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNet2007_2\Resources\field.png'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.DownloadAddIn(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
Microsoft.VisualStudio.Tools.Office.Runtime
Assembly Version: 10.0.0.0
Win32 Version: 10.0.31119.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualStudio.Tools.Office.Runtime/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Tools.Office.Runtime.dll
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.VisualStudio.Tools.Applications.Hosting
Assembly Version: 10.0.0.0
Win32 Version: 10.0.31119.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualStudio.Tools.Applications.Hosting/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Tools.Applications.Hosting.dll
Microsoft.VisualStudio.Tools.Applications.ServerDocument
Assembly Version: 10.0.0.0
Win32 Version: 10.0.31119.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualStudio.Tools.Applications.ServerDocument/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Tools.Applications.ServerDocument.dll
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.VisualStudio.Tools.Applications.Runtime
Assembly Version: 10.0.0.0
Win32 Version: 10.0.31119.0
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualStudio.Tools.Applications.Runtime/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Tools.Applications.Runtime.dll
System.Deployment
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Deployment/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Deployment.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Security
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Security/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Security.dll
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
Any help would be appreciated as I am not a developer just an Application Delivery person.
Thanks

copy disc to your computer and try to run setup file from there.
also, make sure your office dvd is working,

210-4125 will not boot when windows 7 x64 is installed

Similar Messages

Maybe you are looking for