2100+ XP on a k7t266 pro2ru no work??

I bought a 2100+ xp cpu to put into this system and all it gives me is 4 red leds.  I flashed to the latest bios 3.7 and tried to run it again with the 2100+ cpu but still get the 4 red leds.  I am running a 1700+ with no problems but I understood that the 2100+ would work on this mobo.  I checked msi and they say it should work as well.  One thing I have not done is I am taking this cpu back to the place I bought it to have them test it to see if it is good bad or otherwise.  Is anyone running a 2100+ on this mobo.  

So I need to perform the motherboard mod in order for the 2100+ to work?.  I remember getting the mod info when you guys first got it to work but I never went as far as doing it.  I guess I will have the cpu checked out and then decide if I want to mod this otherwise just fine motherboard.  Thanks for the replys.

Similar Messages

  • K7T266-Pro2RU hangs on "checking NVRAM" on reset... why?

    Athlon XP 1600+ Palomino
    K7T266-Pro2RU ver 2.0
    512MB PC2700
    Radeon 8500LELE
    Lite-on 40x12x48
    WD800JB
    WD400BB
    Netgear FA311
    Anyway, it works fine until you hit the reset button. The it just sits there, "checking nvram" until the end of time. What's going on? this really isn't a problem, just an annoyance!! It bothers me to no end.

    Hi,
    Probably some card that doesn't reset too well....
    Or try the clear nvram in the BIOS, see what happens....

  • K7T266 Pro2RU & PCI 2.2

    Hello.
    Im about to buy a PCI 2.2 compliant device and im wondering wether my mainboard is compatible with PCI 2.2
    Anyone know if "MSI K7T266 Pro2RU" 's PCI slots are 2.2 compliant?
    In the manual they are refered as 32-bit PCI Slots. Might that be it?
    If not, will my device work?

    No Tbred cpus are supported by this board without doing a modification to the board. The MSI site says 2000 model 6 is supported (Palomino core). Go to the good articles forum and read about this board with tbred cpu.

  • K7T266 Pro2RU w/Asus v8200 TI 200 no agp4x?

    Ok.. I have posted this before but got no answer so hopefully someone will help out..
    Got this board (K7T266 Pro RU)  last February (2002) had nothing but problems since.. I have a Asus V8200 ti200 64 mb RAM.. Runs on all my other computers but could never get 4x AGP to run this board..  after a while the onboard sound went too so I got a new sound card.. and got a new Vid card (ATI 9700 Pro) still no agp 4x so I got a new Board (k7n2-l) and new CPU (amd 2700+) which runs the 9700 w/ 8x agp fine.  
    I RMA the Board(K7T266pro RU) thinking it's just defective.  replacement board came and built another computer with it using the old CPU (1700+) still no go with the AGP 4x anyone with any suggestions?
    total system specs.
    MSI K7T266Pro2RU
    AMD 1700+
    Kingston 2100 512 mb Ram
    Asus V8200 TI200 Deluxe 64mb ram
    WD 40 gig HD
    [email protected]

    yes I loaded a fresh copy of Win XP pro, loaded the latest VIA 4in1 drivers, and set the bios to 4x.  when in 4x mode I crash, but when in 2x mode I'm ok.  It's not just the Asus Card, same thing happens when I plug in the ATI 9700 PRO.
    I had though it was the power supply so I got a 400 PSU but no changes.

  • Satellite Pro 2100: Booting from a CD-R not working

    Hi,
    At our company we use the BartPE boot disc to get onto the company network from which we can then use Norton Ghost to image our PCs and laptops. This works really well. However, I've got a Toshiba Satellite Pro 2100 which is refusing to read any boot CDs. It'll TRY to read the discs but simply fails.
    I can hear it trying over and over again but it's just not working. I've tried writing using different media and different CD writers, even going down to writing at 8x speed, but nothing helps. Is there a known issue with reading CD-Rs on this range or model?
    Tim.

    Hi
    To boot from the CD you can press the C button immediately after notebook starting.
    Furthermore it would be very interesting to know if it's also not possible to boot from the Toshiba recovery CD.

  • K7T266 Pro-R(MS-6380) & AthlonXP 2100+

    I have a K7T266 Pro-R(MS-6380) with the 1.9 Bios. Currently i'm using a 1,4GHz Athlon Thunderbird. I have been thinking of upgradning my cpu. According to the cpu test the AthlonXP 2100+ doesn't work with my motherboard. Why is this? The AthlonXP 2000+ works just fine and they are the exact same .18 build series. The AthlonXP 2100+ is a few mhz faster. Is there no way to get the AthlonXP 2100+ running? They are both of the Palomino (0.18u) series....

    Quote
    Add Palomino CPU support for 1.5Ghz~1.7Ghz
    That is taken from the list of things updated in bios v. 1.5 for my motherboard. The latest bios released is v. 1.9 and since a XP 2100+ = 1,73GHz, why doesn't it work with my motherboard?

  • How I got my TV@nywhere working

    I got the card a while ago and had to solve many of the problems I read about on the forum.
    1. It took me 5 days of searching to figure out that the serial number for the MSI PVS player is actually on the label of the cd itself
    2. Having solved that, I installed the software and hooked up the audio cable, remote receiver and coax for cable tv. I got it sort of working, with good remote functionality but fritzy audio. Basically, if I changed the channel, the audio would die until I changed it in the settings menu of the pvs software. Oh, and I think I just got lucky on the whole infrared remote thing: mine works fine.*
    3. I solved the audio problem by installing the beta drivers that I got here and the updated msi PVS from here .
    4. I haven't noticed the lack of stereo, and no mpeg4 hasn't affected me .... yet. So overall, I think the tuner has better picture than my Voodoo 3 3500, more features, but worse performance (it's a pig loading for the first time, and channel surfing is out of the question).
    I'm running Win2KPro, SP3
    1.2 GHz Athlon, 512 of PC 2100
    on an MSI K7T266 Pro
    MSI GeForce 4 Ti 4200 TD64
    MSI Tv@nywhere
    (yes, I like MSI)
    Maxtor ATA 100 adapter
    12GB total storage, DVD, CDRW, et cetra
    with:
    TV@nywhere beta drivers here
    updated PVS software here
    * I read in another post about someone with a nonfunctioning remote system saying that the indicator on the remote wouldn't light up. Score a point for good reporting of all suspicions, but unfortunately, the LED on the end of the remote is an infrared transmission diode. Unless you have some very special eyes, you shouldn't be able to see it light up. Radioshack happens to sell a little card that indicates the presence of infrad radiation, designed specifically for diagnosing remote problems like this.
    ALSO, anyone having problems with the remote: Make sure it's plugged all the way in. It clicks several times and you have to push the plug uncomfortably hard. Also make sure you have the Intervideo WinCinema Manager running. It appears as a circular blue icon in the system tray.
    I kinda wish MSI had expressed more judgment before deciding to release an obviously incomplete product like the TV@nywhere. Oh well, c'est la vie. Or something.

    Well, I originally had stereo until I updated to the new drivers and my stereo went away.  So I retreated back to the original pvs drivers.  Not sure why the newer drivers are only mono.  Also, unlike most posts I read, my picture and sound quality are excellent.  I have a geforce4 4400, asus A7V-133 motherboard 640mg ram.  I ran a dvd and vhs through the inputs of the msi tuner card, all worked great, even recorded in vcd format (mpeg1).  I don't use the remote since my cable input comes from my digital TV cable box and I switch channels with that remote.   I understand everyones frustration with the drivers, software and docujmentation/support.  I am satisfied with this product, since it adds some more fun to my multimedia entertainment.
    I did fine tune station 3 in my setup screen to enhance some color, just moved a couple of ticks.  But, I am not experiencing the hugh problems some people complain about.  (eg. snowy picture).  My am working with my friend that has a real crappy picture.  I have reloaded all my drivers and never once witnessed any poor video and audio.  My suggest is for you to keep playing with it.  Also, i am using ME.

  • How gettin 2*200Gb max raid drives 2 work?

    I have windows xp pro sp1 installed.
    Mobo:K7T266 pro2RU
    Bios: an Ami 6380 vms version 3.7
    the raid chip on it:
    Fasttrak100 lite bios version 2.00.1030.23
    i have been using succesfully for quit some time now a striped array for performance with 2 maxtor 80gb raid drives.
    now with the 2 maxtor 200 Gb hd's i can't succeed to get windows to recognise the drives array. they do seem to get recognised succesfully when booting up.
    What am I to do to get these HDs to work properly?
    Is it the older mobo that is causing the problem or the older promise chip? Is it because i need special maxtor software?
    Since this was a costly investment any help whatsoever would be VERY much appreciated...
    thanx in advance

    ok so i finally managed to get windows to recognise the drive. It became obvious that if it is recognised when booting up everything is working.
    so this is what i did:
    right click on my computer=> manage=>on ur left u see disk management and there i found the drive to be seen in windows and was able to format it..
    still one question though...powerquest partition magic 8 says it is a dynamic drive and it has no filesystem (it says type 42) like all my other drives (ntfs) and im not able to format it with part magic ..is it because it doesnt support these big drives yet or what?
    please some professional advise on this.

  • Pb with K7T266 Pro 1

    Hi,
    i have recently problems with my motherboard. In fact, i have added a memory rank (256 Meg PC2100) which was not compatible with my old rank (256 meg PC2100). Only 256 Meg was recognized. I had removed it.
    Now, It doesn't boot anymore (nothing on screen) and the post play 3 beeps. It does not check the keyboard and it is not not possible to access to BIOS setup.
    According the BIOS Beep Codes list, this is due a base 64K base mem failure.
    i have checked the cpu (AMD 1400), the old memory and all other components with another PC. They work well.
    Has anyone an idea on how i can solve the problem.
    Thank for any idea.

    I think I'm having the same or similar problem.
    I bought a new(2nd) 256mb 2100 stick for my K7T266 ProR and when I started up I got memory errors.  If I take the old memory out and replace it with the new it works so i know it's not the new mem.  if I put the second stick in the #2 slot I get memory errors, and it wont start up.  And if i put the second stick in the #3 slot it starts up fine, but the board never reads the second stick.
    So at this point the only conclusion that I draw is that both my #2 and 3 memory slots are F'd up. javascript:smilie(':O')
    Red Face

  • Satellite P10-792: wireless LAN Intel 2100

    Hi!
    I tried to install INTEL BG 2100 wireless mini-PCI card. Drivers work OK, but they say "Radio off". Nothing changes when I press [FN]+[F7]. Card is OK (tested in some Arima-made notebook).
    How can I use the card?

    I have a similar problen with my A30 Satallite. Driver installs OK and device works fine but keeps telling me to enable hardware switch. When you say enable switch do you mean somewhere in the system config because I have found that switching to on position does nothing, as iff switch is not connected.

  • Changed from windows 8 to 7 on a g7 2269

    I succedded in installing windows seven onto my HP g7 2269 notebook. The only drivers available on the HP drivers download page are for Windows 8 and 8.1. Can you tell me where I can find Windows 7 drivers that work on the HP g72269.
    Ethernet Controller
    Network Controller
    PCI Device
    SM Bus Controller
    Universal Serial Bus (USB) Controller
    Universal Serial Bus (USB) Controller
    Unknown device.
    Also: Can you tell me in what order to install them.

    Assuming you mean you have a HP Pavilion g7-2269wm Notebook Computer, most of the Windows 7 drivers on the HP Pavilion g7z-2100 CTO Notebook PC Drivers page should work. You can also try the following chipset manufacturer drivers;
    AMD Chipset Drivers (Chipset / AHCI / USB 3.0)
    AMD Graphics Driver
    There is really no specific order to follow when installing drivers, other than installing the "Chipset" driver first.
    If you still have missing or unknown devices after installing the drivers, please post the Windows Device Manager's "Hardware Ids" for those devices as shown in the example below;
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Replace HDD w/ Win 8 with new HDD w/Win 7

    Just bought a HP Pavilion 17-e067cl Notebook PC from COSTCO. I want to remove the factory installed HDD with Win 8 and the factory load on it and replace it with a new HDD and load Win 7 on it
    Is there anything in the BIOS that would prevent me from doing this? If so, can the settings be modded to accomplish my plan?
    I intend to use an identical bare drive and load Win 7 on it.
    Will a new, retail copy of Windows 7 Home Premium SP1 64bit Full System Builder License and Media, GFC 020250 (1 machine, 1 license) be the correct version of the OS install. I want Home Prem.
    My intention is to keep the original HDD with Win 8 in case warranty issues arise in the future or will the motherboard marriage be a problem?
    details for the laptop:
    prod #: F9L64UA#ABA
    HDD:     ST750LM0 22 HN-M750MBB SATA (Samsung)
    BIOS:     F.22
    Sys Board: 1984 01.13
    Memory:  8GB SODIMM Samsung 1600MHz
    CPU:  AMD A8-5550M APU with Radeon(tm) HD Graphics
    disclaimer: my last cert was on Win XP, so I am way behind the curve on Win 8.
    Thanks in advance!
    This question was solved.
    View Solution.

    ****Disclaimer*****
    HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP will not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer.
    Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING... even if you are going to swap in a new HDD.
    You will need to DISABLE "Secure Boot" and maybe ENABLE "Legacy Support" in the "BIOS Secure Boot cofiguration" on the settings page shown below, before you can attempt to install Windows 7;
    or
    Some of the information below will vary depending on the HDD being partitioned as MBR or GPT, and/or booting the Windows 7 installation media as Legacy or UEFI.
    Additionally, as the hard drive may be partitioned as GPT, you may have to boot the computer using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the "F9" boot menu. If "UEFI - CD/DVD drive",  "UEFI - USB Flash drive" or something to that effect doesn't exist in the boot menu, please post a screen shot and/or descibe the listed boot options.
    I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own Windows 7 SP1 disc. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installer, or WiNToBootic. I like Rufus, as it has options for "GPT partition scheme for UEFI computer" and "FAT32".
    Most of the Windows 7 drivers from the HP Pavilion g7z-2100 CTO Notebook PC Drivers page should work on your computer, however you may need to source some drivers directly from the chipset manufacturers's support sites.
    Please post the Windows Device Manager's "Hardware Ids" for any additional missing or unknown devices as shown in the example below;
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I want to buy an iPhone in the USA (4 or 5!)

    I want to know if it will happily work in the UK. I see that US Apple stores now sell unlocked iPhones like they do in the UK and with the current exchange rate it's a good deal.
    I'm concerned that the US phone may have different GSM specs than the UK phone?
    Will the US phone work exactly as the UK phone does?
    They are triband phones afterall but would different GSM specs have an effect on 3G capabilty?

    Actually, only partially correct. T-Mobile operates AWS 3G in the 1700 and 2100 MHz bands. The iPhone supports (from published specs):
    GSM model: Quad-band GSM/GPRS/EDGE
    (800 850 900 1800 1900 MHz)
    Quad-band UMTS/HSDPA/HSUPA
    (800 850 900 1900 2100 MHz) (800 MHz not yet announced as supported by Apple)
    Thus, the iPhone operates in one of T-Mobile's bands (2100 MHz), so if it doesn't work it must be a protocol difference.

  • Stop triggers ignored.

    Hello everyone,
    I seem to be having a problem many nubies do.
    I open a file.
    At 2sec I put a red square.
    I also put a trigger and select "stop" from the side menu in the action window (so this problem isn't with coding, I'm not entering anything myself but using the provided code)
    I also put the word "circle" on the stage with  a "sym.play(2.1)" to continue the action after i click on the word circle.
    I put a grey circle at 2.5
    after the circle would appear (at 2.5), I wanted the entire animation to stop.
    So I put another trigger, after the circle appears, again from the menu provided.
    Of course the result of this is that the animation pauses and waits form me to click the word "circle" then proceeds to show the grey circle;
    but only for a milisecond before looping back to the beginning of the animation (presumably because it reached the end and started over as usual)
    my question is: why doesn't the second trigger  - sym.stop(); -   stop the animation instead of letting it reach the end? I've tried putting specific numbers in the parenthesis, also tried making labels
    and using them in the parenthesis. Also tried using - play(); -    and   - sym.play(); -  with numbers and labels to create loops to endlessly stall the animation as a pseudo stop.
    all to no avail. After the first trigger that pauses it at the red square, there is no stopping this train, it always reaches the end and loops (which i know the loop always happens there.)
    Anyway, I can't continue learning this awesome program until I'm sure of how to stop. (also been frustrated with "Play from" functions relating to audio files, but that's a whole 'nother sandwich.
    Thanks for your thoughts.
    MD

    Hello
    I was working in Edge some more today and yes, like the nube I am I was thinking in milliseconds but kept putting things like (2.1) instead of (2100), I think I'll be able to remember that now. Sheesh.
    I also did some tests and found out that if you play an animation beginning to end it indeed just stops; but if you happen to be on the last frame and press play it loops back to the beginning (very courteous) but somehow it just looked like it was looping forever the other day.
    So, most of my questions have been hammered out except one, I feel that once I find the answer to this everything else will fall into place.
    Q: How do you definitively STOP the timeline from playing? The following is a list of commands that haven't worked.
         1. stop();
         2. stop(45);    -for number on the timeline
         3. stop("stop");  - for label on the timeline
         4. sym.stop();
         5. sym.stop(45);
         6. sym.stop("stop");
         7. play(44);  - to create a loop between two frames to simulate a stop
         8. play("loop")  - to create a loop using a label for same purpose.
    I need someone to really help me with this simple thing; because all the tutorials say these just work....as I well expect them to; but I could put one or all of these on a trigger at the point where I want the timeline to simply stop playing (so I can put a button there and click to proceed to hear some audio if I like) and
    the timeline will just play and play and play, there's no stopping the train.
    It seemed to work for awhile today, and when it stopped working correctly I figured I must have moved something wrong; but I checked (didn't take a lot of research, it's a simple stop command placed in a trigger on the timeline) and I can't think of anything else to do.
    It's amazing how much of Edge is really based on play and stop, without these basics working on a consistent basis, I can't get out of Kindergarten here.
    As a way of keeping my sanity, I opened a new file just now and created a timeline with a circle moving for 5sec, text that shows up at 2sec that says "stop" , and a trigger right after that (2100) that has - sym.stop()-  and everything works. (so I'm not accusing adobe of making something wrong here, I just keep getting intermittent (seemingly) results when I apply the STOP functions.)
    Any ideas? Is it placement? Does it not work when there is audio on the timeline? Really any past growing experiences would help.
    Thanks everybody.
    MD

  • Music Store shuts down (Still)

    For over a month now, I have not been able to axcess the Itunes music store from this computer (Persario 2100 Window XP) I tunes seems to work fine until I click link for music store / I can see the store loading in the Itunes message window on the progress bar, however as the progess bar reaches the end the entire Itunes program shuts down. I believe I tryed every helpful hint listed in the help files and posted in these discussion, I just purchased a new Ipod for my son and use his disk to install the newest version, however nothing seem to work.
    Help Help Help!! this is driving me nuts.
    Presario 2100   Windows XP  

    Well the USA store is up and running, I just accessed it now at roughly 2:30 am Eastern Time (11:30PM Pacific time).
    Theres something blocking you or something not set right on your PC or connection. Just to cover the basics do this....
    1) Goto control panel>add and remove and uninstall iTunes AND quicktime. Then go here and roll down to "Clean up iTunes installer files on the computer" http://docs.info.apple.com/article.html?artnum=93976
    Scan the PC for malware with Ewido http://www.ewido.com
    Then disable your antivirus and security programs and goto apple.com to download/install the latest version.
    2) Try disabling programs one at a time and then try accessing the store. Disable your firewall and try, if that doesn't work disable antivirus and try again ect ect...
    3) If you are connecting to the net thru a router or some device, try (If you can) connecting your internet connection directly to the PC instead of thru the router/device
    4) UPDATE, goto Microsote/windows update site and make sure windows is up to date. Goto the PC makers site and manually look for updates to your PC model, Make sure your internet browser is up to date, If your connecting thru a router goto the routers web site and make sure it has the latest firmware updates. If you have a router that came from your ISP (Internet Service Provider) ask them or look on there site for firmware updates for the router

Maybe you are looking for