223 GB of "Other"?
My Macbook says I am using 223 GB of "other" and I cannot figure out what that means. It is saying my Startup drive is almost full. Is this the same drive as my hard drive?
I have 4000 mesages in my console from today. A lot of them look like this:
12/4/13 3:29:12.164 PM ReportCrash: 0x7fff8b1c6000 - 0x7fff8b5f9ff7 com.apple.VideoToolbox (1.0 - 705.94) <72AD524C-0616-3C69-BA1F-8D444F97F5A2> /System/Library/PrivateFrameworks/VideoToolbox.framework/Versions/A/VideoToolbo x
Could this have something to do with my lack of storage?
Similar Messages
-
Hi. I'm going to have to remove the glasses from several images of people's faces.
Any recommendations on the best way to accomplish this in Photoshop CS6?
Don't know if clone stamp tool would work best, or trying to select the glasses and using healing? Or are there new features that make this even simpler?
Thanks for any suggestions.a very good tutorial on you tube is :
Remove Glasses Digitally in Photoshop! Retouching Tutorial
FULL LENGTH TUTORIAL: www.tutvid.com In this video we will take a look at a very special way to remove an element from an image. In case we will ...
HD
by tutvid | 3 years ago | 224,223 views
vince -
Mass Upload Appraisal Letters using webdynpro
I want to upload appraisal letters in one go for ~8000 employees in webdynpro ABAP, and display the same using ESS.
I have used FILE_UPLOAD UI element and was able to upload single file.
Please help.laxman,
In general , no one will upload the appraisal letters manually. Its like appraisal letter should be generate from report. IN ESS, behind an action or method you have to call these report so that every employee will get appraisal letter when he clicks on corresponding tab in ess.
anyhow according to your query we can upload max 10 files at a time using acfupdownload UI element and it is available in newer versions only.
ACFUPDOWNLOAD Upload Error 223
Regards
Srinivas -
Frame blended interlaced pulldown frames...
Having an issue with telecine transfered footage (29.97 fps, NTSC) going through color. When it renders out I get a strange frame blended ghost image to any areas of motion. I have tried de-interlacing and not de-interlacing my renders to no avail. No color effects are being used.
The interlaced pull-down frames are the only frames with the shadow image.
Thanks in advance.
Message was edited by: avideditorDid you reframe any shots in FCP? If so that info gets translated into Color's Geometry Room and cause problems. The following is a workaround.
Prep sequence and send to Color (or export/import EDL) as before.
Leave P&S settings untouched and do your grade
Save an archive of your project within Color
Remove geometries, save, close, reopen, render grades.
Then reload your archive within Color and send your sequence back to FCP (or export and import XML).
When you reload the archive Color will give you a warning about not being able to reconnect the renders (or something like that) but just ignore it.
It's pulled from a thread over at the CreativeCOW
http://forums.creativecow.net/thread/223/7110
-Andrew -
When I try to use my own photos as wallpaper (on the E71), they don't fill the screen, but instead leave the original background above and below in clashing colors. Is there a way around that?
Solved!
Go to Solution.Nokia has a theme creation application available (for free) on Forum Nokia: http://forum.nokia.com
The name of the application is "Carbide.ui S60 Theme Edition".
You can also try creating a theme on http://www.ownskin.com
There's also a theme creation application, Theme DIY, which you can run on the phone: http://my-symbian.com/s60v3/software/applications.php?name=Theme_DIY&fldAuto=223&faq=24 -
Creative Cloud Files : Creative Cloude サーバーエラー
昨日から急に共有ができなくなりました。
Creative Cloude サーバーエラー : タスクバーアイコンに赤いビックリマーク
(ブラウザーからは接続可能です。)
Creative Cloud Filesを再インストールしても同じ現象です。
HELPページ通りにやってみてもだめでした。
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-files-wont-connect.html
OS:Windows7 32bit
Creative Cloud Connectionバージョン:1.0.223.0 x86昨日から急に共有ができなくなりました。
Creative Cloude サーバーエラー : タスクバーアイコンに赤いビックリマーク
(ブラウザーからは接続可能です。)
Creative Cloud Filesを再インストールしても同じ現象です。
HELPページ通りにやってみてもだめでした。
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-files-wont-connect.html
OS:Windows7 32bit
Creative Cloud Connectionバージョン:1.0.223.0 x86 -
Is there a versa mount for 30 inch cinema display?
is there a versa mount that fits my 30 inch cinema display? I bought it when they first came out and now I want to mount my monitor to the wall.
The Apple display requires digital input. Dell has a 30" with analog and digital inputs
<http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890> -
Analogue input for 30 inch Cinema Display?
Hi there,
I'm looking at getting a 30 inch Cinema Display and just wondered if there was a way to connect analogue sources (such as an xbox 360 for example) to the display. I guess what would be needed is a female DVI -> female AUX adaptor but I'm not sure if such a thing exists or if it would work the way I think?
If not, do you have any recommendations for good 30 inch displays that do have analogue inputs?
Thanks very much
SamThe Apple display requires digital input. Dell has a 30" with analog and digital inputs
<http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890> -
Repairs for 30 inch cinema display
How can I find out if my 30 inch cinema display can be repaired?
Thank youThe Apple display requires digital input. Dell has a 30" with analog and digital inputs
<http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890> -
I just can't make wallpaper to show over the whole screen. No matter which resolution I use, I got a small picture in the middle of the screen. I started with 240 x 320, than tried larger resolutions, but it is all the same. The only way is to apply the whole theme, but what if I like particular picture?
Any ideas?A full-screen background pic requires using a theme for it.
You can create your own themes with:
- On a Windows PC using Carbide.c++ S60 Theme Edition from Forum Nokia ( http://forum.nokia.com ).
- Online through http://www.ownskin.com
- Using ThemeDIY app on the phone:
http://my-symbian.com/s60v3/software/applications.php?fldAuto=223&faq=1 -
Hi. I am getting a warning in BEx report, Brain Message number 223. When I go to RSRT--> Messages, I don't find the message number in any of the message categories.
Is there a way to insert the message number 223 in RSRT--->Messages?
Thanks all.which version are you on? and what is the warning message text for 223?
-
IOS8.1.1 mailbox crash upon deleting
Deleting newly created folders in mail app makes the mail app crash on my and several other iPads. this has been tested on various devices ranging from iPad 2 till iPad air and iPad mini 2.
Am I doing something wrong. I create the folder in my mail account using the ipad, upon trying to delete, the app crashes.I have the exact same behavior under Vista 64bit. It happens consistently regardless of the number of files, preview or no preview, move or copy, from CF card reader or from hard drive.. Very frustrating.
Lightroom version: 1.4.1 [439926]
Operating system: Windows Vista Service Pack 1 (Build 6001)
Version: 6.0 [6001]
Application architecture: x86
System architecture: x64
Physical processor count: 2
Built-in memory: 4093.6 MB
Processor speed: 2.8 Ghz
Real memory available to Lightroom: 1228.8 MB
Real memory used by Lightroom: 283.7 MB (23%)
Virtual memory used by Lightroom: 252.8 MB
Memory cache size: 223.1 MB -
Crash upon Import LR V 1.4.1.0
Light Room ran great until today when it crashes 100% of the time upon attempt to import RAW files (any files).
I have restarted and did complete power down of system with no positive results. I have closed down all other applications.
OS: Windows XP Pro
RAM: 1 GB
Processor: AMD 64 bit single core
Error Signature (to MS)
AppName: Lightroom.exe
AppVer: 1.4.10
Mod Name: msvcr80.dll
ModVer: 8.0.50727.1433
Offset: 00008aa0
Once in a while LR just fatally crashes and I have to reload it.I have the exact same behavior under Vista 64bit. It happens consistently regardless of the number of files, preview or no preview, move or copy, from CF card reader or from hard drive.. Very frustrating.
Lightroom version: 1.4.1 [439926]
Operating system: Windows Vista Service Pack 1 (Build 6001)
Version: 6.0 [6001]
Application architecture: x86
System architecture: x64
Physical processor count: 2
Built-in memory: 4093.6 MB
Processor speed: 2.8 Ghz
Real memory available to Lightroom: 1228.8 MB
Real memory used by Lightroom: 283.7 MB (23%)
Virtual memory used by Lightroom: 252.8 MB
Memory cache size: 223.1 MB -
Firefox 33.1 does not load Adobe Flash Player 15.0.0.223
As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it. -
VPN Client can't reach router or hosts, but can reach other connected sites.
We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
Few notes:
I have added some lines excluding NAT in a few different ways, but does not resolve.
I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
Any help would be greatly appreciated. Here is the config:
boot-start-marker
boot system flash
boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
no ip domain lookup
ip inspect log drop-pkt
ip inspect name FIREWALL tcp
ip inspect name FIREWALL udp
ip inspect name FIREWALL ftp
ip inspect name FIREWALL fragment maximum 256 timeout 1
ip inspect name FIREWALL ntp
ip inspect name FIREWALL pptp
ip inspect name FIREWALL dns
ip inspect name FIREWALL l2tp
ip inspect name FIREWALL pop3
ip inspect name FIREWALL icmp router-traffic
no ipv6 cef
crypto isakmp policy 1
encr aes
authentication pre-share
group 2
crypto isakmp policy 5
encr 3des
authentication pre-share
group 2
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp policy 95
authentication pre-share
group 2
crypto isakmp policy 99
hash md5
authentication pre-share
group 2
crypto isakmp policy 110
hash md5
authentication pre-share
crypto isakmp client configuration group VPN-RAS
key *********
dns 10.96.17.2 10.1.200.50
wins 10.96.17.2 10.1.200.50
domain mine.com
pool RAPOOL
acl SPLIT
save-password
split-dns mind.com
netmask 255.255.255.0
crypto isakmp profile USERS
match identity group VPN-RAS
client authentication list DOMAIN
isakmp authorization list VPN-RAS
client configuration address respond
keepalive 300 retry 5
crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
mode tunnel
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set DES esp-des esp-md5-hmac
mode tunnel
crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
mode tunnel
crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
mode tunnel
crypto ipsec transform-set myset esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map dynmap 1
set transform-set AES128
set isakmp-profile USERS
crypto map COMPANY_VPN 10 ipsec-isakmp
set peer *******
set transform-set 3DES-MD5
match address PA-VPN
qos pre-classify
crypto map COMPANY_VPN 50 ipsec-isakmp
set peer ******
set transform-set AES128
match address VPN
qos pre-classify
crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 37.222.111.224 255.255.255.248
ip access-group INBOUND in
no ip redirects
no ip unreachables
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip inspect FIREWALL out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
crypto map COMPANY_VPN
interface GigabitEthernet0/1
no ip address
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1.17
description LAN
encapsulation dot1Q 17
ip address 10.96.17.253 255.255.255.0
ip access-group OUTBOUND in
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
standby 0 ip 10.96.17.254
standby 0 priority 110
standby 0 preempt
standby 0 track 1 decrement 20
interface GigabitEthernet0/1.27
description VOICE
encapsulation dot1Q 27
ip address 192.168.17.254 255.255.255.0
ip access-group OUTBOUND in
ip helper-address 10.96.17.2
ip flow ingress
ip nat inside
ip virtual-reassembly in
h323-gateway voip bind srcaddr 192.168.17.254
ip local pool RAPOOL 10.96.20.50 10.96.20.150
ip forward-protocol nd
ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 37.222.111.223
ip route 10.96.16.0 255.255.255.0 10.96.17.250
ip route 172.22.1.0 255.255.255.0 10.96.17.250
ip route 172.22.2.0 255.255.255.0 10.96.17.250
ip route 172.22.3.0 255.255.255.0 10.96.17.250
ip route 192.168.16.0 255.255.255.0 10.96.17.250
ip access-list extended DMZ
deny ip any 10.0.0.0 0.255.255.255
deny ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended GUEST
deny ip any 10.0.0.0 0.255.255.255
deny ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended INBOUND
deny ip 80.25.124.0 0.0.0.255 any
deny ip 10.0.0.0 0.255.255.255 any
deny ip 172.16.0.0 0.15.255.255 any
permit udp host 173.239.147.114 any eq isakmp
permit esp host 173.239.147.114 any
deny ip 192.168.0.0 0.0.255.255 any
permit udp any host 37.222.111.224 eq isakmp
permit udp any host 37.222.111.224 eq non500-isakmp
permit esp any host 37.222.111.224
ip access-list extended NAT
deny ip 10.96.20.0 0.0.0.255 any
deny ip any 10.96.20.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.255.255.255 any
ip access-list extended NONAT
permit ip any 192.168.0.0 0.0.255.255
permit ip any 10.0.0.0 0.255.255.255
ip access-list extended OUTBOUND
deny udp any host 22.55.77.106 eq isakmp
deny udp any host 22.55.77.106 eq non500-isakmp
deny esp any host 22.55.77.106
permit ip any any
ip access-list extended PA-VPN
permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
ip access-list extended SPLIT
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
ip access-list extended VPN
permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
route-map NAT-POOL deny 5
match ip address NONAT
route-map NAT-POOL permit 10
match ip address NATWe have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
Few notes:
I have added some lines excluding NAT in a few different ways, but does not resolve.
I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
Any help would be greatly appreciated. Here is the config:
boot-start-marker
boot system flash
boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
no ip domain lookup
ip inspect log drop-pkt
ip inspect name FIREWALL tcp
ip inspect name FIREWALL udp
ip inspect name FIREWALL ftp
ip inspect name FIREWALL fragment maximum 256 timeout 1
ip inspect name FIREWALL ntp
ip inspect name FIREWALL pptp
ip inspect name FIREWALL dns
ip inspect name FIREWALL l2tp
ip inspect name FIREWALL pop3
ip inspect name FIREWALL icmp router-traffic
no ipv6 cef
crypto isakmp policy 1
encr aes
authentication pre-share
group 2
crypto isakmp policy 5
encr 3des
authentication pre-share
group 2
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp policy 95
authentication pre-share
group 2
crypto isakmp policy 99
hash md5
authentication pre-share
group 2
crypto isakmp policy 110
hash md5
authentication pre-share
crypto isakmp client configuration group VPN-RAS
key *********
dns 10.96.17.2 10.1.200.50
wins 10.96.17.2 10.1.200.50
domain mine.com
pool RAPOOL
acl SPLIT
save-password
split-dns mind.com
netmask 255.255.255.0
crypto isakmp profile USERS
match identity group VPN-RAS
client authentication list DOMAIN
isakmp authorization list VPN-RAS
client configuration address respond
keepalive 300 retry 5
crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
mode tunnel
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set DES esp-des esp-md5-hmac
mode tunnel
crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
mode tunnel
crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
mode tunnel
crypto ipsec transform-set myset esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map dynmap 1
set transform-set AES128
set isakmp-profile USERS
crypto map COMPANY_VPN 10 ipsec-isakmp
set peer *******
set transform-set 3DES-MD5
match address PA-VPN
qos pre-classify
crypto map COMPANY_VPN 50 ipsec-isakmp
set peer ******
set transform-set AES128
match address VPN
qos pre-classify
crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 37.222.111.224 255.255.255.248
ip access-group INBOUND in
no ip redirects
no ip unreachables
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip inspect FIREWALL out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
crypto map COMPANY_VPN
interface GigabitEthernet0/1
no ip address
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1.17
description LAN
encapsulation dot1Q 17
ip address 10.96.17.253 255.255.255.0
ip access-group OUTBOUND in
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
standby 0 ip 10.96.17.254
standby 0 priority 110
standby 0 preempt
standby 0 track 1 decrement 20
interface GigabitEthernet0/1.27
description VOICE
encapsulation dot1Q 27
ip address 192.168.17.254 255.255.255.0
ip access-group OUTBOUND in
ip helper-address 10.96.17.2
ip flow ingress
ip nat inside
ip virtual-reassembly in
h323-gateway voip bind srcaddr 192.168.17.254
ip local pool RAPOOL 10.96.20.50 10.96.20.150
ip forward-protocol nd
ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 37.222.111.223
ip route 10.96.16.0 255.255.255.0 10.96.17.250
ip route 172.22.1.0 255.255.255.0 10.96.17.250
ip route 172.22.2.0 255.255.255.0 10.96.17.250
ip route 172.22.3.0 255.255.255.0 10.96.17.250
ip route 192.168.16.0 255.255.255.0 10.96.17.250
ip access-list extended DMZ
deny ip any 10.0.0.0 0.255.255.255
deny ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended GUEST
deny ip any 10.0.0.0 0.255.255.255
deny ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended INBOUND
deny ip 80.25.124.0 0.0.0.255 any
deny ip 10.0.0.0 0.255.255.255 any
deny ip 172.16.0.0 0.15.255.255 any
permit udp host 173.239.147.114 any eq isakmp
permit esp host 173.239.147.114 any
deny ip 192.168.0.0 0.0.255.255 any
permit udp any host 37.222.111.224 eq isakmp
permit udp any host 37.222.111.224 eq non500-isakmp
permit esp any host 37.222.111.224
ip access-list extended NAT
deny ip 10.96.20.0 0.0.0.255 any
deny ip any 10.96.20.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.255.255.255 any
ip access-list extended NONAT
permit ip any 192.168.0.0 0.0.255.255
permit ip any 10.0.0.0 0.255.255.255
ip access-list extended OUTBOUND
deny udp any host 22.55.77.106 eq isakmp
deny udp any host 22.55.77.106 eq non500-isakmp
deny esp any host 22.55.77.106
permit ip any any
ip access-list extended PA-VPN
permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
ip access-list extended SPLIT
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
ip access-list extended VPN
permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
route-map NAT-POOL deny 5
match ip address NONAT
route-map NAT-POOL permit 10
match ip address NAT
Maybe you are looking for
-
IPhoto 9.4.3 will not open in OSX 10.8.4
I have tried several times to delete and reload iPhoto through the App Store. I even followed Terence Devlin's reply to earlier post with the same issue. Here is the log: Process: iPhoto [699] Path: /Applications/iPhoto.app/Content
-
Ok I'm a beginner at this! I plan to use Oracle to create a medical data base for patients. However, This is the most complicated database I've seen and the best. So, how do I use create form for use on my personal computer first before trying to use
-
I used to use Firefox, then couldn't browse. ISP said trble was in browser, then I realized all I had was IE, and it's not working. How do I get Firefox if I can't browse? I'm on borrrowed computer. Thanks. == This happened == Every time Firefox open
-
I am using Safari at my home comuputer (Dell, Windows XP). I recently installed it within the past two weeks. Just this Sunday, I noticed that there are several pages that I haven't been able to view and the same message "Safari can't open the page "
-
Updatable Materialized View Example
Hello, I am using Oracle 11.2.0.1 on Windows OS. I am looking an example of updatable MV something like this : Table1 id col1 col2 col3 col4 Table2 id col2 col3 Table3 id c1 c4 c5 I need an updatable MV which joins all these 3 tables based upon ID co