22CV1000 Toshiba LCD TV/DVD combo: Sound but no display
I am having problems with my 22CV1000 Toshiba LCD TV/DVD combo!
When I turn the tv on, it sounds like it is trying to read a DVD. The display appears for second, but then goes black. I still have sound, just no display.
The Toshiba help line told me to unplug and replug the tv - but that did not help.
I would really appreciate your advice!
At this point, I think you should call support back. It sounds like it might need a repair.
- Peter
- Peter
Similar Messages
-
Toshiba 24LV411U TV/DVD combo turns off
I have a Toshiba 24Lv411u TV/DVD combo.
When turn it on the red light turns green for about 10 seconds then it turns itself off again.
I unplugged it for a few months...went back to it today and it worked fine for a few hours.
Now it's back to the same old turning itself off again.
Any ideas?
ThanksToshiba 24LV411U is not known to me but from my point of few its hardware malfunction.
Maybe something wrong with main board or other electronics parts.
Sorry mate but I think its impossible to say whats wrong exactly without detailed check. -
Insignia 26" LCD TV/DVD Combo display problem
My Insignia 26" LCD TV/DVD Combo has a display problem when you turn it on it is very bright, changes to verticle stripes after about 10 minutes of "warm up" you begin to see a egraded picture and after a little more warm-up the picture finally comes through clear. I am past my warrenty period but I would like to fix the TV rather than throw it away.
1) can someone tell me what the problem is
2) identify the part that needs replacment and the cost
3) estimate repair cost if I brought it in to be fixed
Thank youTry setting the input to antenna and then scanning. If that doesn't work, you will need to get a tuner box.
-
Toshiba RDXV60KB - On playback only sound but no picture
Recently got this DVD recorder, but on playback I am only getting sound but no picture. Struggling to see where I have gone wrong.
Have you tested DVD recorder with several different original DVDs and eventually with recorded program?
If I understand you right you can see the menu and everything else but only video material is not visible, right? -
Toshiba 32LV67 tv dvd combo wont turn on/Disc light blinks repeatedly
I have the 32LV67 dvd combo and the disc light just keeps blinking when i plug it in. i read somewhere that you can re-install the firmware but i cant find it anywhere. Please help me!
There is no firmware downloads for that model.
Try leaving it unplugged from power overnight. If the problem persists, it may require servicing.
- Peter -
Mavericks Apple TV, Sound but NO display
I updated all my devices and they are all up-to-date. Whenever I try and use AirPort to my Apple TV from ANY device (Phone, Mac, IPad) my TV is able to play the audio but there is no picture (with either 'mirror' or 'extend' my desktop)
When I first start it up, sometimes, and only sometimes, it displays my inital screen, but then freezes.
Othertimes, it doesnt even allow me to select 'mirror my desktop'
This is very frusterating. I believe it is an issue with the AppleTV update, it worked before the update.
If there is no solution, is there a way I can downgrade my AppleTV?If you are using Airplay to send something to AppleTV, many iOS apps only transmit sound due to restrictions.
Alternatively are you not seeing anything on teh TV (menus etc) with AppleTV connected?
AC -
Hi i bought an ipod for christmas and i was lsitening to it on my bus from school and this lad yanked the head phones and broke one of them so i thought okay they only fiver so i went to select a song and all there was on the screen was streaks of colour and i have showed a technican and he has sadi that the lcd screen has burnt out.Can someone plz help me.
ipod video 30gb Windows XPyou could pay a bill of $600 to have it fixed or you can buy a new Ipod for only $300
-
19" lcd dynex tv/dvd combo problem
I am wondering if anyone can help me with this.
I have 2 19" lcd tv/dvd combo... one in each kids room. I mounted em up on the wall so the kids couldn't mess with them.
So now heres my problem, both of the tvs when turned on turn off then back on then back off... continuous
Ive unplugged em, tried pushing different buttons. Still nothing.Both of them?
Really? Both?
Now that's odd.
That sort of thing makes you think it's an external problem (not relating to the TV) - but let me ask you this, did they start doing it at the same time or did one do it, and then the other later on? If so, what changes did you make if any?
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox -
Usb link from nano to dvd surround sound no longer connecting
Used to listen to nano through DVD surround sound but it no longer finds it. usb cable checked and Ok as it will still read an alternative nano. HELP! Do not have a stereo so its my only way of listening without earphones.
Used to listen to nano through DVD surround sound but
it no longer finds it. usb cable checked and Ok as
it will still read an alternative nano. HELP! Do
not have a stereo so its my only way of listening
without earphones.
Does your nano still charge when connected to USB port on your computer? -
Toshiba TV/DVD combo 32SLV411U - listening through wireless headphones?
I hope I am posting this in the right place. I couldn't find a specific board just for tvs?
I have recently purchased a Toshiba TV/DVD combo 32SLV411U. I really like it but have an issue.
The best way to go about this I guess is to tell you what I hope to be able to do.
First, I will say I did call Toshiba tech support and they said it couldn't be done and advised I buy a sound bar.
I am not 100% convinced they fully understood or that a sound bar would solve the problem.
The tv model I have does not seem to have a separate headphone jack. I does obviously have the rear hookups for the rca type cables.
While watching a DVD (unhooked from cable box, in DVD mode) I want to be able to have the tv totally silent.
I live in an apartment complex and don't wish to disturb neighbors. I want the audio from the DVD to come through to the wireless headphones only. This does work when the TV is hooked up to the cable as the sound comes through the cable box.
It seems to me I should just be able to attach the rca audio cables to the back of the TV and listen as I have described above. But I can't get it to work no matter what configuration I have tried. I don't know if I just need to set things up differently or what. When I go to menu and look at the options, it doesn't seem to give me many choices in that area, unless I am looking in the wrong place.
Can this be done without me buying anything extra? If so, how do I set it up to do this correctly when watching a DVD?
If I do need to buy something else, how does a sound bar work and would it solve the problem?
Or should I look for a stand alone DVD player with audio hookups in back (that kinda defeats the purpose of
having a TV/DVD combo but might be a less expensive option.
I guess I should've taken a second look at the features before purchasing the TV combo. I just assumed that with the audio hookups in back it would work. I had no problems with the previous TV/DVD combo I owned, but it did have a headphone port. In the meantime, I am watching DVD's on my PC.
Any information or advice is truly appreciated. Thanks in advance.> I hope I am posting this in the right place. I couldn't find a specific board just for tvs?
You could not find a right board because this is a Toshiba computer systems user to user forum.
However maybe I could help you:
> While watching a DVD (unhooked from cable box, in DVD mode) I want to be able to have the tv totally silent.
I live in an apartment complex and don't wish to disturb neighbors. I want the audio from the DVD to come through to the wireless headphones only. This does work when the TV is hooked up to the cable as the sound comes through the cable box.
In my case I connected my HiFi directly to the DVD player using RCA cables (red/white chinch).
Furthermore the DVD player is connected to the TV via HDMI.
I can disable the sound on TV and can listen to the sound coming from the HiFi speakers.
If you want to use headphones, then connect this to the HiFi and this should help you :) -
Toshiba TV 2998ASU - sound but no image
Hello friends
I need you help
I have a television toshiba 2998asu
The sound of the DvD functions but the image does not appear in the screen.
Please can I have an opinion, a tip.
Please it sends the manual for me?Hello
This forum is created for computer systems and I am afraid it is the wrong place for your question.
Anyway I have tried to find manuals for your TV but without success. This model is not listed on any list I found for manuals.
Best page I found is http://tacpservice.toshiba.com/CONSUMERPRODUCTSUPPORT/Manuals/TVom.asp but your TV is not listed there. Maybe you should visit some TV shop or repair centre and talk with technicians about your problem.
Sorry buddy. :( -
CD/DVD Combo VS Toshiba TS-L632 8x DVD±RW drive
Is the Toshiba TS-L632 8x DVD±RW drive compatible in the hp pavilion zx5295us notebook? I want to replace the existing cd/dvd combo drive to upgrade to a dvd burner.
Hi
This unit might be developed and designed for the US market.
I did not see it in the Europe.
Im not 100% sure about the built-in drive but it could be a Toshiba DVD-Rom SD-R2512 -
I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???
what application are you using to watch the DVD?
is it a burned dvd? -
My apple tv and airplay works great except when I try to play a dvd on my macbook. Have sound but no video.
You won't be able to view them via Apple TV, correct. It is not meant for this function, if that's your intended purpose its best to get a DVD player
-
My Toshiba DVR620KU VCR/DVD unit chews tapes
I bought my DVR620KU VCR/DVD combo unit some time last year as a refurbished unit. As such it either had no warranty or a very short term warranty. And since I bought it as a refurbished unit, that meant that it didn't qualify for any of BestBuy's Geek Squad service plans, so they won't touch it. Anyway for the past month or so, maybe longer, the VCR side has been chewing tapes. Sometimes, it won't rewind and intead will switch off. When I turn it back on, it ejects the tape. And tapes recorded on the VCR side are horrible. And sometimes, the machine will make a squealing sound when I fast forward. And when it does rewind, I hear a clicking sound. And it's left one edge of my latest tape all crinkled. Have other people had this problem? Is it a problem that can be fixed and does it cost a lot to fix it? The DVD side works just fine.
Right now. I'm just using the DVD side to record stuff I want to keep permanently since my stepfather stockpiles DVD+R disks that can only be recorded onto once. I was recording my cartoons onto tape since I watch those and rewind the tape to reuse. But now that the VCR chews tapes, I have those on the Verizon Fios DVR. The Toshiba unti itself is still connected to the converter box that was already connected to the TV before we got Fios in the house. I still record operas that transmit over the converter box onto DVD.
Maybe you are looking for
-
Using Sql Result and Limit Value in Prompt OBIEE 11.1.1.5
Dear Gurus, I have prompt hierarchy like this: Year Quarter Month Which are using limit value (Quarter depend on Year, Month depend on Quarter), but I have issue because appear null also in those prompt I have checked my database, view, repository th
-
Opening my lightroom 5.. I get a message that Lightroom encountered an error when reading its preview Cacge and needs to quit. Can someone walk me through the steps. Im dealing with MAC computer
-
How do I get Discoverer 3.1 to read data from Paradox 8.0?
The on-line manual for version 3.1.36.06 of the Discoverer Admin product suggests that you can read in data from non-Oracle databases. The following steps are from the on-line manual instructions about creating a new business area: 1. From the File m
-
Editing rule in separate panel in CC like in CS5
In Dreamweaver CS5 when I wanted to edit a style on a style sheet, I would highlight the style in the css panel and there was a little pencil icon which when clicked would open the whole rule in a separate window. This panel listed all the options yo
-
Trying to fix ipod. Process of elimination replacing parts...
HI, I'm currently trying to fix an iPod colour (4th gen). It will not boot up normally, only ever getting to the Apple logo. It shows, at different times, both the sad ipod and the folder icon. I have replaced the hard drive and the logic board. Runn