23.39fps conversion for fce4
Hello,
I have a clip created using the 8mm app for ipad.
There are not many setting options in the app and I chose HD 16:9 which resulted in a clip of 1280x720 and the odd thing is the frame rate is 23.98fps.
I'm wondering the best way to convert it for editing in fcp4.
I have compressor but I usually use quicktime 7.
I tried using the Apple Intermediate Codec and changing the frame rate tp 29.97 and that looks ok.
Wanted to check this will produce best quality before getting into the edit.
D
That should do the trick.
AIC is the only HD codec FCE uses.
AL
Similar Messages
-
Sorry if this is going over old ground but I have yet to find the answer I hope exists.
I have just been bought a copy of FCE4 and I need to edit video that often comes in the form of avi or various mpeg formats. After editing, different publishers require these files in different formats, again this is usually avi or mpeg (occ quicktime). Is there a good piece of software (Quicktime pro? quicktime pro with mpeg2 codec?streamclip?) that will be able to do all of this for me rather than multiple bits of software?
Thanks for your help and apologies if somebody has addressed this problem elsewhere but many hours of searching have yet to clear this one up for meFrom my limited experience MPEG Streamclip seems to offer a lot of options, it's a free download, only the one program, you will need the MPEG2 Codec though, which is a download from Apple to add into QT, cost about £15 I think.
-
Unit of measure conversion for CIN is not relevant for pricing
During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. VDear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra -
What are the special conversions for time in update rules?
What are the special conversions for time in update rules?
Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo -
Sales Order Conversion for Go-Live
Folks,
I would like to get your expert thoughts on sales order conversion for go-live. I will give my thoughts below and would like to see if you can extend them and make this better.
1. The environment is this: the order entry systems are several external systems interfacing with SAP CRM. Therefore, there are two options to bring the sales orders to SCM: i) Use the same interface (BAPI_APO_AVAILABILITY_CHECK that is called from CRM) and create the orders, or, ii) Create the sales orders in ECC and then use the sales order integration model. Note that this is the only time sales orders will come from the ECC system. In steady state, they will come from CRM and based on the SPM scenario that SAP has enabled, they WILL NOT be replicated in ECC
2. Ensure that all deliveries in the system have been executed. That is, there is no stock that has been assigned to a delivery and the delivery has not been shipped. If this is not the case, you have to bring the deliveries into the system also. So, to clarify, no outstanding deliveries will be brought into the system as part of the conversion.
3. Sales order fields related to BOP will be populated through program or by other means. This is implementation specific. Some example fields are: i) Sales Org, ii) Delivery Priority, iii) Shipping Conditions on the header, iv) Transportation Zone of customer, v) Ship-to Party number, etc.
4. Run BOP for all the sales orders based on the criteria that has been defined for this conversion. Note that the criteria for the conversion could be different from the criteria that we will use for steady state.
Could you add any missing steps?
Thanks,
Satishthanks nitin
i would like to use it as prepayemnt itself
but when i am trying to load using oe_payments base table it loads
but when i use data and use in oe_payments_iface all it doesnot load after i run the order import program
can u plz suggest me where i am going wrong
thnaks -
Minimum Spec for FCE4: cheapest Mac Mini?
I'm looking to get a Mac Mini primarily to record endoscopic video (s-video) via a Canopus ADVC 55 using Final Cut Express. Looking at the minimum requirements for FCE4 it seems the cheapest model with 2GB RAM should be way more than adequate. The specs don't even mention hard drive speed.
However, by todays standards 2GB is fairly minimal, and the 5400 rpm 2.5" hard drives are quite slow. I have used FCE4 on an original white MacBook and frequently got dropped frames when recording (which lost the entire recording each time), a problem that disappeared when I upgraded to a MacBook Pro.
If used purely for recording, and if the hard drive is regularly cleared (video files moved to a Mac Pro for processing) will there be any problems with only 2GB of RAM, or the speed of the hard drive?
Because this is to go into an operating theatre where space is limited, I would prefer that I don't have the hassle or expense of an external Firewire hard drive (and I'm guessing the single Firewire port may be an issue).
Looking at the spec for the Mac Mini Server it looks much more suitable, 2 7400 rpm hard drives, 4GB RAM - but cost wise I think will be harder to persuade my employer!I'm afraid I cannot really answer your question as I don't need / use the features of the snow leopard server software. Hardware wise the differences add more ram, 2 hard drives (and they're faster) but no optical drive (with the option of connecting one externally). Other than that it comes with snow leopard server which allows you to use it as a normal mac, but additionally can be set up as mail server, file server, and a bunch of utilities to help manage this (not sure how accurate my understanding of the differences between the software).
Incidentally the normal version of snow leopard has a certain amount of server functionality anyway, eg filesharing, web hosting etc. I think the server edition mainly provides lots of tools to take this further.
It definitely would require configuring, and you would need other stuff like a router to connect the computers together which would also need configuring. But not much different to linking a bunch of normal macs together (if you're usinng it as a file server). I might be wrong but I don't think the connected computers can run on it's OS like some of these dumb terminal systems can.
Message was edited by: bilbo_baggins -
Can anyone Explain about Data conversion for Material master In SAP MM
Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
ThanksHi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc] -
why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year
Make sure you're actually logged-in to your account.
-
File Content Conversion for Unequal Number of Columns
Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure : TOTALSET,*
TOTALSET.fieldNames : ITEMSET
ignoreRecordsetName : true
TOTALSET.fieldSeparator : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
SrinivasHi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start) (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM -
Hierarchy on file content conversion for receiver?
Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>051</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>051</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005010</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005011</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00005</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00002</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>061</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>061</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005012</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005013</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005014</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00006</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00003</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header (1-1)
detail (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header (1-1)
..detail (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu -
Content conversion for multilevel varying structure File to Idoc
Hi All,
I have following file structure.
VO
C1
S1 1 to unbounded
H1 1 to unbounded
D1 0 to unbounded
D2 0 to unbounded
U2 0 to unbounded
UC 0 to unbounded
My Idoc structure.
ISU_EL34
IDOC 0 to unbounded
E1ISU34 1 to unbounded
ZSEGMENT 0 to 1
I have applied the content conversion for the length specific file as follows.
Recordset structure: VO,1,C1,1,S1,1,H1,1,D1,,D2,,U2,,UC,
Do I need to do any changes over here to satisfy the above file structure.
V0 and C1 occurs only once in a file.
for S1 I should have H1 compulsory and others are optional, but i need to create Idoc when D1 data is available only.
I'm able to read the total file with the above content conversion.
MY requirements:
1) I need to create the Idoc based on the occurance of D1 node. I'm using H1 data also in the idoc not S1.
2) My doubt is whether the content conversion I have provide is applicable to the structure I have prepared.
3) When I'm trying useOneAsMany function for the above ie H1 data should repeat in Idoc as and when D1 repeats.I'm failing the error is both queues are not contain same number of data..
Could anyone suggest how I should approach for the above scenario.Hi Sravya,
It is really helpfull answer , Thanks for sharing my problem .
It worked for this purpose, but I'm facing following problems
MY scenario
The file contains records V0,C1,S1,H1,D1,D2,U2 and Uc
In which Im using the data of H1,D1,D2,U2 and UC for creating target Idoc.
Every H1 contains at least 1 D1 record, If D1 exists D2 ,U2 and UC may or may not exist.If exists those are in a sequence and should consider the data of them to create Idoc.
Idoc should be created for every D1.
Problem facing:
Do we have any mechanism to group the D1 records to the relevant header.since Im unable do this with content conversion.
I think bcz of above problem; some records (D2 & U2 & UC) data is populating in Idoc even there is no D2,U2 and Ucs.
Thanks,
venu. -
Query on Content conversion for Receiver SFTP Adapter
Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass -
Data Conversion for Project Module
Dear all,
I have a requirement to perform data conversion for Project module from 11.5 to R12. I am new to this module. Can anybody can outline (or provide documentation reference):
1)Source tables in 11.5
2)Data Selection for source tables in 11.5
3)Validations need to be performed for data clean up
4)Interface tables and interface programs in R12
Thanks,
SudipSee the following links for information on all R12 interfaces
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
If you are on 11i, go to irep.oracle.com
Hope this helps,
Sandeep Gandhi -
How to use content conversion for Complex structure
Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details 1 to Unbound
.....Header 1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM 1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath MenteHi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh -
Content Conversion for Sending Communication Channel using File Protocol
I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please HelpHi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful
Maybe you are looking for
-
Create a configurable Web Interfaces
Good Afternoon, I would like to build a Web application using JSP, Servlets and Struts. However I want that the users could configure their interfaces once they are logged. By configuring interface, I mean that a user could choose to hide/show an inp
-
I have a web site that creates a page by calling another class object. When I return from that page to the Main page I want the old page removed. I have done it like this but I am getting errors. Two vars in GlobalVarsContainer: public static var rem
-
I haven't had this problem until recently (the last month or so) but I have my iphone calendar set for military time to avoid any confusion. Military time isn't even available as an option on ical on my main computer! Now every time I try to sync my
-
How do I move a layer to a mask that is on another layer?
Layer 3 is black and white image of abstract art. It has many holes in it as most abstracts do...too complex to mask manually with a brush so, I made a b/w mask by converting it to b/w and adjusting brightness/contr
-
Dear all, Please help with advice ons how to configure hotmail and live mail and gmail addresses in Apple Mail ? Apple cannot help, and Microsoft cannot help. Many thanks.