23.989 to PAL sound is out of sync track 3 is blank!!!!!

Trying to convert a 23.98 file to PAL using the frame rate converter in Compressor, using the play frames at 25 so it speeds up but plays every frame. the picture comes out fine but the sound does not sync up! i have done this 3 times with the sound only now and it always drifts! Also this is 4 track sound and track 3 always comes thru blank! i have set the audio seq settings audio output to 4 tracks, tried mono and stereo still get blank track 3 after going through Compressor. This is really a pain!
Any one know what the heck is happening?
thanks, Mark

No one knows anything bout this????
Apple come on!

Similar Messages

I rented a movie on iTunes and the sound is out of sync and the movie has now been removed?

i rented a movie and the sound was out of sync i reported it and got no respone and now the movie has been removed, help please??

Report it again using this link and ask for a credit.

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

Hd movies play choppy and the sound is out of sync in iTunes

I'm getting choppy video playback and the sound is out of sync in iTunes any solutions?

Control panel
Sound (Hardware n Sound)
Under Playback tab, highlight each device and click Properties button
Go to Advanced tab and change Sample Rate to 16bit 48000hz (DVD Quality) or 96000hz (Studio Quality), OK n OK.

Sound goes out of sync in playback, why???

I have just bought the new MacBook Pro 13" with the i7 dual core 2.8
and bought Final Cut X from the app store - Im playing around with some footage shot on the Panasonic Lumix DMC-TZ7
Ive put in a few edits with transitions, some titles and added sound effects.
In playback, the sound slowly goes out of sync! After only about 10 seconds...
The vision lags while the sound keeps going, there is some flickering, then its worse.
If I pause playback, then resume it resets...
Any ideas?
cheers, David

I have also experienced this. Not on every video. But on some videos.
The sync slowly drifts. Then hit pause and then play, and sure enough, the picture and sound are back in sync again.
This tells me that if you export ("share") the movie, the sound will be fine (it was for me). But it is unnerving to preview your work and see and hear the picture and sound drift out of sync like that.
I don't know the answer of why it happens (or how to remedy it), but my hunch is it has something to do with either not enough memory (or processing power), or a slightly underpowered video card. Just a guess.
I guess in any of those cases, the remedy would be to upgrade to a more powerful computer. :-(

Sound goes out of sync after pausing video

Hi everyone,
Got a 1 month old Apple TV which is working just great with videos bought off the store... However I've run into a really annoying problem when watching videos that I've encoded myself. They will all play just fine, from beginning to end - unless I pause them. When the videos are un-paused the sound is badly out of sync, and no amount of pausing/unpausing stopping/starting will get it back in sync again. Best I can do is restart from the beginning and fast forward to the same spot and this usually results in a better sync - but not perfect. This happens with both SD and HD encoded video. They are playing off the internal drive having been synced over from my itunes library.
My Apple TV is on 3.0.1 firmware and I'm running iTunes on a Windows 7 laptop. I've been using "Any Video Converter Pro" (http://www.any-video-converter.com/products/for_video/)to re-encode my videos as I don't know much about the subject and it has an AppleTV option which makes it really easy...
Here's the settings used for a typical video file: 1280x720 resolution with a 3500kbs bit-rate at 25fps, audio bit-rate of 128kbs with a 44100 sample rate. 2 channels.
Would be grateful for any ideas on what's going wrong here as this is really spoiling my enjoyment of the apple tv.
Cheers,
Steve

Sounds like the encoder software causing issues.
When I encode on the Mac from my Camcorder to itunes/ATV I use HandBrake with good results - there is linux and Windoze versions versions available.
It has a preset for ATV as the destination which saves the hassle of tweaking the settings to start with....
It's been around sometime and was fantastic help when I went from Windoze to Mac a few years ago, and I wanted to re-encode all those files I had still in raw DV format from the camera.

The sound cuts out while a track is playing in iTunes. Are their any fixes for this?

The sound randomly cuts out while a track is playing in iTunes. The track has to be stopped and restarted before sound returns. Are their any fixes for this?

Hello there, smalltowngirl93.
The following Knowledge Base article offers up some great in-depth steps for troubleshooting audio not playing in iTunes or Quicktime:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound is out of sync in iMovie and video freezes at a part but audio continues. How do i fix this???

Can someone please help me. I have even tried the youtube videos and can't seem to get the sound to sync up on my videos in Imovie. Also, one part just stalls and stays on the same frame but the audio continues on fine.
I NEED HELP!!! This is for school and I can't hand this in all wacked out

44100 Hz is fine and the audio codec is fine. Most camcorders record at 48000 Hz, but audio CDs are recorded are 44100 Hz, and iMovie handles them well.
However, your video frame rate is an odd number. A camcorder in the US will usually record at 29.97 frames per second. In Europe, the standard is 25 fps. On some cameras, you also have the option of 24 fps (same as a Hollywood movie).
Your camera is recording at 14.89, which is about half of the 29.97 standard. I am guessing that the video is from a webcam or maybe a cell phone or still camera. It is difficult to sync audio over long periods of time if your video is not conforming to the standards. Cameras like this may record at varioable rates, so sometimes you get more than 14.89 and sometimes less. Your best bet would be to make an iMovie project at 29.97 fps, so that it will basically repeat each frame of your video twice to get up to 29.78 fps. Even so, it will drift out of sync over time.
If you had Final Cut Pro X, you could use the tools in FCP to conform your video and audio to a 29.97 timeline and probably keep it synced better. Long term, your best bet is to use a camcorder that can shoot 29.97 (or 30) fps.
Short term, I would suggest keeping your clips in your project short. For your 15 minute clip, drag in the first minute, then the 2nd minute, etc. untill you have it all. Even so, it may drift. Detaching audio is probably not necessary.

Video and sound slightly out of sync when screen mirroring

When I start screen mirroring and play a video, then my macbook screen matches perfectly with the sound output from my stereo, but my tv is slightly delayed compared to my macbook which makes the sound and video out of sync. it is something like 1/10th or 1/20th a second, but it is extremely annoying.
Anyone has the same problem or knows how to solve this?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

Video and sound are out of sync

The picture and sound my Apple TV are out of sync by several seconds. THese are on items that have been copied to Apple TV as opposed to streaming from iTunes. Anyone have experience with this? What's the solution?
Thanks.

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

X-Fi Titanium Sound Lag, Out Of Sync. Help!!

I have a? X-Fi Titanium connected digitally to my Sony AMP via a Digital Optical cable and?using the DTS?Connect Encoder (via the creative control panel) and also analog via the 3.5mm jack. I have noticed that there is a sould lag through the digital connection, about /4 of second difference. I can change the sound sync via my AMP but then that puts all my other devices connected to the AMP (Blu-ray player, PS3, 360 etc) out of sync. Is there away i can change the sound sync for the digital connection on the X-Fi Titanium itself?

No one else have this problem, i cant be the only person whos noticed this MASSIVE flaw?

Video images and sound are out of sync

Hi, I'm new to videocasts so please forgive me. I have a few video podcasts that play fine in iTunes and in other iPods but audio and images become out of sync when I play it on my Nano. Does anyone have any suggestions?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

HT1933 Sound is out of sync with picture on animated movie.

Purchased two Barbie animated movies for the family. Both movies start off playing just fine. About halfway through, the sound starts to lag versus the picture. This gets worse and worse until what you see and hear no longer makes sense. For example, a man character is heard speaking but the picture shows a woman character lips moving.
Near new computer and didn't have any trouble with downloading.
Have reported the problem but thought I'd ask for some advice on here.

extend the timeline that contains the flvplayback component to match the duration of the video.
assign an instance name to your flvplayback component (eg, flv_pb) and add the following to the first keyframe in the timeline that contains flv_pb:
stop();
flv_pb.addEventListener(fl.video.VideoEvent.PLAYING_STATE_ENTERED,f);
function f(e:fl.video.VideoEvent):void{
flv_pb.removeEventListener(fl.video.VideoEvent.PLAYING_STATE_ENTERED,f);
play();

Sound is out of sync with imported video.

Hello
So I've Embedded an flv video in the frames of adobe flash so that I can animate over the top of it.
I realised that on export the audio is slightly faster.
I thought that this wouldn't be a problem as i'd just have to re-possition the audio. But then I realised that it's not just faster, the audio speeds up at a different rate to the video.
How can I fix this? Has it got something to do with the frame rate of the video being different to the fash animation? If so how can I change that?

extend the timeline that contains the flvplayback component to match the duration of the video.
assign an instance name to your flvplayback component (eg, flv_pb) and add the following to the first keyframe in the timeline that contains flv_pb:
stop();
flv_pb.addEventListener(fl.video.VideoEvent.PLAYING_STATE_ENTERED,f);
function f(e:fl.video.VideoEvent):void{
flv_pb.removeEventListener(fl.video.VideoEvent.PLAYING_STATE_ENTERED,f);
play();

Out of sync sound when import mpeg4

I've import mpeg4 file from my Flipcam. I just wanted to make tigher ins and outs. But when I pull it into to timeline - the sound is out of sync. Any ideas why?
Thanks in advance.

MPEG 4 is not an editing format.
Convert your video to one of the codecs found in Final Cut Pro"s Easy Setup menu.
Does this camera shoot HD or SD?

23.989 to PAL sound is out of sync track 3 is blank!!!!!

Similar Messages

Maybe you are looking for