23" cinema (clear) have an IPS panel?

My aging 23" cinema display (purchased in 2000, if I recall) is having brightness problems and I'm looking to replace it and wondering if I'll be happy with an inexpensive monitor.
The 23" cinema has an IPS panel in it, right? A newer inexpensive monitor with a TN panel will have faster refresh, greater contrast, and...reduced color accuracy, right?

The 23" cinema has an IPS panel in it, right?
Yes.
A newer inexpensive monitor with a TN panel will have faster refresh,
No. They all use 60Hz refresh rates. The response time my be faster, but you probably won't notice it.
greater contrast,
Probably not. A lot of displays advertise dynamic contrast, which is a useless number, that is much greater than the real contrast ratio.
and...reduced color accuracy, right?
Yes, and greatly reduced viewing angles, so it will look even worse if you aren't viewing it straight on.

Similar Messages

  • Going to take 7 or more weeks, just have a IPS panel placed.

    X230 Laptop sent in for rma repairs to IPS panel for 7 bright pixels on 7/3/2013.
    Stated average turn around time 1 week, order status 'on hold'.
    After a week I call Lenovo they state "parts out of stock, stock will be available in 1 more week".
    Week passes, still no change. I call Lenovo they state "parts still out of stock eta 1/4/2013".
    Time passes, I call Lenovo again they state "The previous eta were just a eta, the actual eta from parts is 21/4/2013".
    The actual turn around time is going to be at least 7 times the stated, assuming there aren't anymore delays. This is not acceptable. Not sure if its Lenovo themselves or Visual Group (company who are in-charge of Lenovo repairs in New Zealand) but something definitely needs to be looked at. There is just no reason that a part from a current gen laptop takes that long to become available.
    There's one positive, the call center response is quite good and they staff did what they could with the information they were provided.

    Good grief!!
    I posted about this overs 7 months ago for version 2, and they still haven't fixed the problem by version 3?!
    http://forums.adobe.com/message/4142178#4142178
    Well, I'm certainly glad I didn't wait for developers to fix this...(in fact, I got the distinct impression back then that development had been abandoned).
    I wound up ditiching it, and set up keyboard shortcuts for all the tools in the toolbar....which actually turned out to be faster for my workflow in the end.
    Now I rarely use the toolbar, and I don't have to suffer the ludicrous hassle of stacked tools.
    You will likely wind up doing the same...

  • Trying to find out if X220 with model number 42875TU have the IPS screens

    Hi, I'm trying to find out if X220's with Model Part Numbers of 4287-5TU have the IPS screens? I cant find the model through the Lenovo model search. Thanks for the help.

    Hi
    I can't explain why partslookup service by MTM doesn't show your laptop parts. Though support site contains its short specification.
    Try to get parts list by laptop serial number if you know that one:
    http://support.lenovo.com/us/en/partslookup
    You'll find the panel p/n and its description.

  • 27" iMac + 21" iMac as Secondary Display or Other IPS Panel?

    Hello,
    I've been on the hunt for a replacement setup to my 24" Intel iMac + 20" Cinema Display for quite some time, and after some trail and error, believe I have the best of both worlds.  From a workflow perspective, I prefer to focus on a single display centered in my light of sight, with the secondary display to my left (head turn is acceptable for me) and plays host to Internet browser windows, IM chats, and other overflow type stuff that I'd prefer not to minimize and/or close when working.
    My challenge has been pairing the 27" iMac with a comparable IPS display at a relatively similar DPI with a glossy finish.  Other than the 21.5" iMac, there doesn't seem to be another display out there with these properties.  A second 27" Cinema Display is not only overkill for my needs, but at nearly the cost of the smaller 21.5" iMac doesn't net me any gains beyond screen real estate. Since the advent of display input capabilities that are identical to the previous generation 27" iMac, the extra few hundred bucks nets me the display I want with a bonus computer behind the bezel!
    Question 1:  On paper this appears to be totally feasible, but has anyone tried this configuration and can comment on how they are making out?
    Question 2:  Has anyone found a 21.5" or similar display size with the properties that match the 27" Cinema Display (glossy finish, IPS, and similar DPI)?
    As a side bonus, my wife and kids would get full rights to run rampant on the 21.5" without compromising my 27" iMac environment, so as a side benefit this may be the winning combo, but I thought I'd ask to be sure.
    Thanks in advance!

    You can easiliy connect an external display to your imac. All you need is the correct adapter. In your case you would need a mini-display port to VGA or if the external display has HDMI or VGA, mini-display port to either of those connections.  Your 2011 21.5" display can support up to 1 external display and you can buy the adapters at Apple's on-line store.

  • Service on IPS Panel

    Hi guys, I just wanted to report my experience with the Lenovo service. My x220 has the IPS panel which was replaced do to backlight bleed after two months I received it. It came back with the same exact backlight bleed although I was told the lcd was in fact replaced. After some months I noticed two new defects: ghosting (and since I do graphics in my free time this is really annoying for me) and a white spot 2cmx2cm in the bottom right corner. 
    So decided to send my x220 for service just before the end of the 1 year warranty period. My X220 is currently in Germany in order to service the above mentioned problems but guess what ? I just called in after receiving an email and they just told me that my lcd is not covered by the warranty because the defects of the lcd were caused by my misuse!
    They told me they will send the pictures in order to proove such misuse...I am really curious now to seem them!
    My questions is, wasn't Lenovo aware of the high defects rate of their LCD panels??

    stoot wrote:
    ... and a white spot 2cmx2cm in the bottom right corner. 
    My questions is, wasn't Lenovo aware of the high defects rate of their LCD panels??
    Probably they know very well, but just don't acknowledge such problems. This forum is full with various problems with x220 (some design faults), so this looks like x220 is somewhat doomed or cursed design. At least for this price (i have almost 2000€ unit) i expected troublefree laptop. Disappointed a bit, white dots problem seems not very uncommon even with gentle use. My old field workhorse - x61s takes some more rough handling and no problems at all. 
    Premium display doesn't mean quality as it seems. Sad.

  • Is the xb270hu i ordered ips panel?or tn?

     
    Today afternoon i just called acer hotline  today and the girl i dont know from what department said there's only one xb270hu model in singapore and it is ips panel type and THATS THE ONLY REASON i bought.Later when i call  technical department,a man said it is TN panel .DID I GOT SCAMMED?
    EDIT: ACER USING XB270H(TN PANEL) NAME AS XB270HU(IPS PANEL) IN SINGAPORE!GOT SCAMMED!LUCKILY HARVEY NORMAN KINDLY REFUND WHEN I CANCEL THE ORDER! HOW CAN U NAME DIFFERENTLY BY PUTTING A U BEHIND THE NAME.

    Yes, you will need an antenna as well.  You will probably want to add more memory, you can have up to 2GB (an iSight can take 2.5GB), and depending on the size of the drive, you might want to put a bigger one in as well.

  • Y510p IPS panel upgrade?

    My y510p is over a year old now and the 1080p TN panel just doesn't cut it.  I've watched a hundred people swap them on the Y50 for LG IPS panels with great results.  Does the Y510p have the same connections that I can just use the Y50 tutorial or is this a no go?  Or is there an adapter i could use.

    Ah, that's a shame. I was hoping to do that myself. Thanks for posting your findings.
    Y510p - i7 4700MQ (Overclocked to 3.6GHz), SLI GT755M, Corsair Vengeance 16GB 2133MHz, Samsung 850 Pro 256GB, MyDigitalSSD SuperBoot 128GB, Intel Wireless-AC 7260, Windows 7 Home Premium (SP1)

  • HT1481 I have an ipod shuffle which i need to reset as i can not sinc it on my laptop which is using windows 8, but when i open itunes i d not have the 'source panel' on the left hand side which should show up my ipod. any ideas what i need to do? please

    Hi  I have an ipod shuffle which worked well on my old pc but since i have tried to link it with my new laptop I cant get it to sinc. I have athorised the device to my laptop so i thought it maybe worth resetting it but all the info I have read tells me that to reset my ipod i need to open i tunes and on the left hand side in the 'source panel' i will find my ipod listed but when i open itunes i do not have a source panel so i cant reset it. i have spent days trying to get this problem sorted and am about to throw the thing away. I have tried to manually sinc the thing, i have installed and reinstalled the latest version of itunes, i have restarted my laptop but i dont know what to do next. any help would be very much appreciated. Many thanks in advance

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I have 2 tab panels on my website and 1 is not working

    I have 2 tab panels on my website and 1 is not working one on a templet so it shows on all pages and one for some of the pages when I upload it to my server it brakes the ones on the pages  heres an exaple
    http://ol.helpmetechteam.com this is main page
    http://ol.helpmetechteam.com/computer_repair.html this is one of the pages i need to have a tabed panle set up
    I ran the test
    http://validator.w3.org/check?uri=http%3A%2F%2Fol.helpmetechteam.com%2F&charset=%28detect+ automatically%29&doctype=Inline&group=0&verbose=1&user-agent=W3C_Validator%2F1.2
    but I dont kow how to fix the error im getting I thought the doc type was right  can any one help?
    Thank you
    Aaron Dye

    You need to add the constructor for the second TabbedPanels as follows
    var TabbedPanels2 = new Spry.Widget.TabbedPanels("TabbedPanels2");
    Gramps

  • TS3989 My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

    My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

    mlvov,
    I did as you said and went to the icloud control panel on my Windows 8 Laptop to be sure I was looking at the correct folder for my photo stream.  All my "shared" albulms pushed to my Laptop and are up-to-date with the exception of the "photostream" album. If I create a "shared stream album" and place photo's in it on the phone; I can see the photos on my laptop. I dont get it. I had a iphone 4s and had zero isues and now with my new nifty iPhone 5s it doesent work.
    What am I not doing correctly.
    Thanks,
    iPhone, 5s, iOS 7.0.2

  • My phone is saying No SIM card installed, when I clearly have my SIM inserted?

    My phone is saying No SIM card installed, when I clearly have my SIM inserted. I can't make or receive calls. What can I do to fix this?

    Did you already try to remove it and put it back again?
    When changing the SIM card, power off the device prior to opening the SIM tray. After you have changed the SIM card for your iPhone you may need to reconnect it to iTunes.
    iPhone keeps a record of previously inserted SIM cards, but if the carrier name of your SIM does not show up in the status bar after you changed the SIM you will need to reconnect iPhone to iTunes. If you do not connect iPhone to iTunes after changing or reinserting the SIM, iPhone may not work as expected.
    If iPhone does not work with the SIM card after connecting to iTunes, you might need to restore your iPhone. Consult the iPhone User's Guide for more information on iTunes and iPhone.
    If your iPhone does not show up in iTunes (on the left hand side of the iTunes window under Devices), please see the following links for assistance:
    iPhone: Not recognized in iTunes for Mac OS X
    iPhone: Not recognized in iTunes for Windows
    copied from http://support.apple.com/kb/HT2309 About swapping SIM cards
    If this does not work, contact your provider, maybe your SIM is damaged.

  • Visio vsdx files don't have a hover panel display in search results

    Greetings,
    I've noticed that Visio documents with vsdx extension don't have a document icon in the search results, nor do they have a hover panel to preview the document.
    It seems like it's supposed to be there out of the box according to this article. Any thoughts?
    https://technet.microsoft.com/en-us/library/dn386874.aspx
    -Doug

    Hi,
    From your reply, you wants to get the icon for Visio document, and the steps to build a hover panel to render a Visio document.
    For the icon issue, the Visio documents with vsdx extension don't have a document icon in the search results, so we need to create icon for the Visio document.
    The following articles are about creating icon for some types of document, hope they will help:
    How to: Change the Icon for a Search Result:
    https://msdn.microsoft.com/en-us/library/office/cc789805(v=office.12).aspx
    How to display values from custom managed properties in search results - option 1:
    http://blogs.technet.com/b/tothesharepoint/archive/2013/09/11/how-to-display-values-from-custom-managed-properties-in-search-results-option-1.aspx
    For the hover panel issue, we need to create hover panel display template for Visio documents. There are three steps we need to follow:
    Decide which hover panel display template to modify
    Copy an existing hover panel display template
    Modify a hover panel display template to show values from custom managed properties
    Detailed information, please refer to the article below:
    How to display values from custom managed properties in the hover panel in SharePoint Server 2013:
    http://blogs.technet.com/b/tothesharepoint/archive/2013/09/17/how-to-display-values-from-custom-managed-properties-in-the-hover-panel-in-sharepoint-server-2013.aspx
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • IOS 8 - using Siri but she can't find contacts that I clearly have in my address book. Why? I can find them manually.

    IOS 8 - using Siri but she can't find contacts that I clearly have in my address book. Why? I can find them manually.

    I have this issue also.  I ask Siri to call a contact, it repeats and spells the contact exactly as it is in my contacts, then says it cannot find it.  This happens for multiple contacts...

  • Can't sync all ringtones, some get sync, and some don't even though I clearly have them all checked.

    I've created my AAC file and then changed it to m4r mode and then I copied it back to the tones section of iTunes. Everything is fine at this stage. Then when I try to sync all my tones, some get sync and some don't even though I clearly have all of them checked. So I click the all tones box instead and sync, then other tones which previously have not been synced are synced and those that were synced previously do not get synced. I've tried everything, from making duplicates of songs to even deleting my tones and re-syncing. I've taken over an hour to sync and still unsuccessful. Why is it so complicated just to sync a few tones? Is apple trying to discourage customers from using custom ringtones and only those from the iTunes store? Im so ready to just throw my phone... It's so much easier to transfer tones over using an android phone since I dont have to use some stupid software by android and sync when i can just drag and drop.
    SOMEBODY PLEASE HELP!!!
    Thanks in advance

    What fixed it for me:
    On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
    Uncheck "Sync Music"
    Click "Sync" button (bottom right)
    Let it run and finish
    Uncheck the box for every song, playlist, etc.
    Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
    Let it run and finish
    Check the boxes for the music you want on your iPhone
    Click "Sync" button (bottom right)
    Let it run and finish
    See if that doesn't work for you.  I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.

  • I would like to have a solar panel on my iPhone so I can have a constant state of charge what do you think about that?

    I would like to have a solar panel on my iPhone so I can have a constant state of charge what do you think about that?

    I am among this community since I invested much into this corporation. I rather go to the consumers just to discuss an idea I would like for this corporation to achieve. I do not like to purchase third party accessories as they seem to fail my expectations or the fact that it is not worth it when i finally see what they have made. Yes they are good products but there is much disappointment when I look to third-party products that say they are engineering products for the iPhone or other Apple device I have purchase. Just a thought no need to be so hostile.

Maybe you are looking for