23" Cinema Display and VGA connection ??

Hey all,
I have a VAIO S580 notebook and a 23" Apple Cinema Display. The VAIO uses a VGA connection to connect to external monitors. I have been looking for VGA to DVI adapters that would allow me connect my VAIO to my ACD. However, I could only find adapters that are DVI-I and DVI-A thus far. Will these adapters work for my setup?
TIA

Monoprice.com is another good site. I have a question for everyone. I have a Powermac G4 and 21" cinema display. I recently connected the computer to a tv via a DVI to HDMI cable. It worked fine for a few days. Now when I restart the screen freezes without a toolbar at the top of the screen or the dock. If I unplug the cable the screen goes blank for a second and both the toolbar and dock appear. Can someone help with this?

Similar Messages

  • Connecting DVI Cinema Display and VGA Projector from Minidisplay Port

    Hi Everyone!
    I'm trying to get my mid 2011 Mac Mini to send a signal from my MiniDisplay Port to a vga splitter which works fine. My biggest thing is that when I connect my inFocus IN112 VGA Projector the screen shows up from my mac but to connect my Cinema Display it takes VGA so I had to go from the VGA Splitter on one side and use a vga to dvi adapter and my cinema display shows blank? Help Me Please!!
    Thanks,
    Andrew

    I already have a converter on the end of the VGA Splitter to go to the Cinema. The reason I don't use the hdmi to dvi is because with the minidisplay port using vga to the projector and the hdmi going to dvi to the Cinema it makes the projector screen very rough and pixely

  • Using 23" Cinema Display and VGA to DVI adapter??

    I have 4 computers (2 deskop PCs, 1 IBM thinkpad laptop and 1 MAC). I have a DVI switcher. 3 of my PCs work great. My IBM thinkpad (T23) has an old style DVI connector on it that I cannot use (I thought I could until I got the Apple Monitor). I have tried a passive (no power) VGA to DVI adapter...but the monitor just ignores the signal. Do I need to purchase a $299 powered VGA to DVI adapter? I was thinking of looking for a PCMCIA (PC Card) video card with DVI out for my laptop, but havn't found anything when searching via google. Any information would be helpful. Thank you!
    PowerMac G5   Mac OS X (10.4.5)   23" cinema display

    The VGA to DVI adapter sounds like it's just an adapter that re-routes the pins to make the cables connect. The DVI connector can carry both analog and digital signals, so all the adapter would do is make a VGA cable with its analog signal go into a DVI cable that still carries the same analog signal. If that's the case, it won't work with the Apple display since the Apple display doesn't accept an analog VGA input even if you get the cables and adapters to hook it up. So yes, you would need the expensive VGA to DVI "converter" rather than just an "adapter".

  • How to connect a 23" Cinema display and mac mini to an AV Receiver?

    I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end.  The AV receiver has upscaling capability so I thought I'd try again.  I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound.  The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal.  Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
    I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work?  I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
    Many thanks

    The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

  • Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • Share Cinema Display and peripherals with MBP and PC

    Share Cinema Display and peripherals with MBP and PC
    I am about to be forced to use a business network connected PC in my office, but I will continue to bring my personal MacBook Pro to work for my personal e-mail, calendar, internet, etc. (it will be connected to a seperate open DSL network). I am thinking about getting an Apple Cinema display and trying to use this one display for both computers. I would like a way to "switch back and forth" between the two systems, all the while using the same mouse, keyboard, printer and Cinema display.
    Does anyone have any experience setting up what I am wanting to do?
    Also, how does connecting an external display effect a MBP? Can you close the screen on the MBP, turning off the MBP's display but keeping the computer running? I'd like to be able to tuck the MBP out of the way to save deskspace but still be using it via the Cinema display and peripherals...
    Thanks so much!

    You can use synergy (link: http://synergy2.sourceforge.net/) to link the mouse and keyboard across the two platforms.
    If you want to use only one display, you'll need a KVM switch.
    You can run the MBP either with it's own screen open, or shut it and use only the external screen.
    Hopefully this helps a little...

  • Using external HD Cinema display and USB keyboard/mouse with "closed" MBP

    I have an early 2009 17-inch MacBook Pro and a ~2007 HD Cinema Display. I routinely hook up my cinema display and an external USB keyboard/mouse when I am at my desk, and I close the lid on the MacBook to just use the external display. When I leave the office (I do about 50% of my work away from my desk) I use the MacBook on its own, often just putting it to sleep while I connect or disconnect the monitor and keyboard.
    My problem comes more often when I have used my computer on its own, and I try to plug it back into my cinema display. I have the computer set to ask for a password on coming out of sleep or screen saver, and every so often the computer just hangs when I wake it up--usually when I plug in the external keyboard. When I am able to login, sometimes I am not able to use any of the icons on my desktop--it's almost as if they are not there or recognized by the finder. My solution has been to go into the view options and choose to re-arrange the desktop in some way, and then I can select them again as normal. This is a frustrating solution as 1. it takes extra time, and 2. I loose my desktop arrangement, which makes it hard to easily find what I'm looking for.
    Is there a "better" way (order of plugging things in, settings, etc. besides shutting down and restarting) to connect and disconnect my MacBook from my external monitor and keyboard to assure an easy login and use of my desktop icons?

    I'm not sure if this is germane, but Apple specifically warns about plugging or unplugging USB or FireWire devices from the laptops while they are sleeping. Doing so can result in kernel panics, crashes, inability to wake up the computer, etc. So specifically they recommend you only connect or disconnect such devices before putting the computer to sleep and after waking it up.

  • Using my macbook alternately with cinema display and without makes all my screens shift and change in size ?!

    After I disconnect from the cinema display and than a few minutes later open up the macbook without the display connected, things are fine. But re-connecting to the display, all the screens are moved and/or changed in size. Anybody any ideas ?

    I'm currently sitting in my office using my MBP and looking at a 24" Samsung display. At home I replaced my 4 year old iMac with a 2 year old 13" MBP which is connected to a similar display. That should be tell you all you need to know! 

  • Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

    Hello there
    I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
    i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
    why is it not working...

    have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

  • Help!  Strange Problem with 23" Apple Cinema Display and Wireless Internet

    For some reason, Safari runs much much slower on my housemates new 23" Apple Cinema Display than just on his new Macbook. He is running Tiger. We use Airport Extreme for house-wide wireless, and he has an Airport Express to connect to his printer. Here is what he wrote:
    "Last night, I was watching videos on ABC.com --- not a problem to watch on my laptop screen (new Macbook) - very fast. Then, after dinner, I plugged in my external screen (Apple Cinema Display), and it was so slow and wouldn't load. I unplugged the screen, and it was lighting fast again, so I watched the videos on my laptop screen. This morning, I was plugged into the external monitor and the Internet was slow to check my email. I unplugged the screen, and it's lightning fast now on my laptop screen.
    Does this make any sense??? Why would my external monitor affect the Internet speed? "

    I am having a similar problem as well. When I attach my 23" cinema display to my MacBook core 2 duo, my connection to the internet immediately stops working. I have tested this several times and it happens every time I connect the Cinema Display to my MacBook. When I disconnect the Cinema Display, my internet connection works perfectly again. I'm stumped as to why this happens.
    I have tried several different searches on the forums, but have found no other threads besides this one. I'm I won't have to suck it up and pay the $50 for the call to AppleCare support.

  • Original 22" Cinema Display and G5 Dual-Core Machine

    Good Morning, All!
    Is there a special adapter or converter I need to run my old 22" Cinema Display on my G5? I had to go back to the Dr. Bot I had when I had the monitor on a G4 450. With the arrival of the G4 933, I was happily able to do away with the Dr. Bot "octopus" and take full advantage of all the display on-board stuff (power switch, USB ports, etc.) However, the new dual-core has forced me back to that friggin' Dr. Bot, even though the G5 books says it's ready for ALL Cinema displays. Well, obviously not mine.
    A part number and a place to purchase would be most appreciated!!! I got spoiled to the power switch on the monitor. It was really rather dumb for Apple to put a metal start-up button on the front panel of the G5. With the air as dry as it is right now, the static is horrible and I don't like giving the machine a jolt when I started up in the morning. I find myself having to ground to something before I ever touch the machine these days.

    Hi,
    Well I have just bought a Quad G5 that I was gonna
    use with my old DVI equipped 22in Cinema Display and
    now discover that the connector on the display has
    more pins than the connector on the video card. How
    am I supposed to get around that?!
    Are you sure the display is DVI (screw knobs), and not ADC (clips)?
    If it is DVI and has six round pins (2 X 3) in the middle that are not on the video card connector, the extra pins are for dual link, which is only used on the 30" display. Depending on which video card you have, one or both connectors may be dual link, but you don't need the extra pins for the 22" display.

  • Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

    Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
    Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

    Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
    Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
    Make sure SD DVD is selected:
    (If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
    Build your DVD and you'll be fine.
    Patrick
    P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

  • Question about the new 27" LED Cinema Display and text size

    Hi, I own the 24" Apple LED Cinema Display and text on the monitor is just large enough for me. Won't text on the new 27" Display be much smaller with its higher resolution?

    MANY thanks for the tip.
    Now then - all indications are that my Mini will NOT pass audio via the MDP Cable given the age as well as the lack of an HDMI port (I know there isn't one this rig).  Unless I am missing something I don't believe there is any adapter out there that will allow the audio to now pass through the MDP Cable if the rig itself was never configured to do so.
    Following links in your posting, someone recommended this: 
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=6331&seq=1&format=2#description
    However it seems to be set up to deliver A/V to an HDMI display, and unless I am mistaken, the 27" LED ACD does not have an HDMI in.  Although my MacMini does have a S/PDIF Optical Digital Audio Output I don't believe the 27" LED ACD has any kind of separate audio input (either TOS Link or even 1/8 smini stereo).
    So I reckon I am SOL with regard to getting the audio onto the new monitor from the Mini and I would need to keep my present speakers set up using the 18/" mini stereo out - but the video should still work......yes?  

  • 24-inch Cinema Display and Mid-2010 Macbook Pro - Cinema Display still flickers after updates

    I currently have a 15-inch Macbook Pro (mid 2010) hooked up to my 24-inch Cinema Display.  I have updated all the firmware for both the Cinema Display and the Macbook Pro but still get intermittent flickering.  Moreover, I have cleared the PRAM and VRAM.  I have done ever possible update I can find, the system is fully functioning.  Help?

    I am having this exact same problem.  2010 iMac with NVIDIA GeForce 9400 256MB.  I have it hooked to a 30" display through a DisplayPort to DVI-D adapter.  The 30" is fine, but I have graphical corruption constantly on the main iMac screen.
    This all started as soon as I updated to Yosemite a couple days ago.

  • How to connect a cinema display and a VGA monitor to mac mini

    I bought a Macmini and want to connect to a cnema display and to a monitor that uses VGA connection. I also bought a MiniDisplayPort to VGA adapter but the MacMini only has ONE Minidisplay port.  I thought this would be more straitforward....

    I'm unsure of the issue, the Mini has both mDP and HDMI outputs, right? If so, the mDP for the Cinema Display an a HDMI to VGA adapter for the 2nd monitor.

Maybe you are looking for