23" Cinema totally dead - how to diagnose?

I unplugged this while moving my computer around. Plugged it back in and totally dead. Light on monitor does not light up when plugged in.
I'm hoping the power adapter is simply dead. Is there any easy way to see if the power brick is dead? Can the Apple Store do that for me?
And if it is, in fact, dead, should I buy the same one or one with higher power output?
Finally, if the power brick is dead, am I potentially better off buying a brand spanking new Samsung 23" LCD monitor for $200 vs. $130 for a power adapter on a 5 year old monitor?
Thanks in advance.
Frank

Rainbird,
I went to System Pref > Display and don't see "options".
I did hook up a Dell monitor to the computer and it is fine.
I just connected the Cinema to the 2nd monitor. In Sys Pref > Display, it shows the Dell. If I hit the "Detect Displays" button, nothing happens, but if I then select "Gather Windows," I get a window for Cinema HD.
I have not found a place to check a "power on or off" setting.

Similar Messages

How to diagnose dead battery vs. something more serious?

I'm in the 11th month of ownership of an MBA, purchased brand new last year. 128MB model.
My battery, I believe, is dead but I'm not sure how to diagnose the matter.
Here's what's lead me to this conclusion:
MBA charger light stays off when plugged in (not dim, but off).   I've had the dim light issue as well, earlier this year, and Apple replaced the charger. This time, however, the light stays completely off.
Battery icon in top right corner tells me that no charger is plugged in. The icon is in battery mode.
Battery charge keeps decreasing steadily in % value despite charger being plugged in, indicating that battery is continually discharging.
My wife has an MBP, and I've used her 85W charger on my MBA with the same result... i.e charger light stays off.   I know that the MBP charger is in good health as it charges the MBP with no issues (orange light).
I've used my MBA charger on her MBP, and it charges the MBP just fine!!! (orange light)
I've done an SMC and NVRAM reset on the MBA, which hasn't affected the situation.
Since I'm on 15% charge on the MBA, I've shut it down and have booked an appointment with Apple to have it looked at.
In the mean-time, I'm hoping to get some clues from fellow MacBook users on this forum.
I've read somewhere that if it is indeed the battery that's faulty, then once the charger is unplugged, the MBA should turn off immediately. This isn't the case for me... I'm able to run off battery (whatever tiny amount of charge I have left) with the charger unplugged.
Hence, I've ruled out the charger being faulty. I'm not so sure that the battery is faulty. I'm thinking the issue might lie elsewhere... maybe the magsafe connector on the MBA?
I should also mention that when I opened the lid on the MBA earlier this evening, before noticing this charging issue, the screen flickered brightly once. The screen looked and operated normally after the flicker. Not sure if there's a connection. I'm beginning to think there is.
I should also add that, even though the MBA has been a pleasure to use, the past 11 months haven't been trouble-free... which adds to the suspicion that the issue might indeed be somewhere deeper.
A brief history of "issues":
About a month or so into ownership... my fan, one day, decided to suddenly spin up to full RPMs and stayed at that speed for an eternity. I'm used to the fan speed steadily going up in direct relation to the CPU temp.   However, the CPU temp this time was 35C the entire time (according to iStat Menus)... i.e. the MBA was "stone cold". It made no sense for the fan to be on full-blast. In addition, I had nothing running. No intensive software. Not even Safari. Just "Finder".   Turning the MBA off naturally caused the fan to stop. However, the moment I powered it back on again, the fan came back on at full speed again.
An SMC reset fixed the issue, and I was good to go. This issue occurred again a few months later, but I solved it right away with the SMC reset.
After another month or so I noticed, while listening to music via headphones that were plugged into the MBA, that I could hear an electric "hum" in the headphones. Then all of a sudden the hum went away. I discovered that the hum was present only when I physically touched the metal case of the MBA and went away as soon as I removed my hand.   I mentioned this to a Genius bar... err... genius and he seemed perplexed. He wasn't able to offer an answer.
I've also noticed that when the MBA is charging, and I run my finger-tips over the MBA's metal surface that I feel static. When the charger is unplugged, I no longer feel the static.   Again the genius didn't have an answer. He probably thought I was weird.
I'm thinking my MBA might have "grounding" issues, but am no expert in this field.   With the latest charging issues, however, I'm leaning towards this theory again.
Thoughts are welcome.
Regards
MrAir

No clues, it is very apparent you have a hardware problem and it is not the battery. If it was the battery the computer would not be running as you say the charger is not charging the battery.
There is a charging curcuit that has more then likely failed. You have done the correct thing, take it in and get it fixed before your warranty runs out.

My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable. now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

My ipod 32gb 1st generation battery went totally dead because the usb cable was defective. I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. Nonetheless it is charging. However can i resolve these issues bearing in mind that i am not tech savvy?

have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.
Try disabling a/v software and turn off the Firewall on your PC.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
http://support.apple.com/kb/TS1538
Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
Select the box next to: Open iTunes when this iPhone is connected
That way iTunes should open automatically when you connect your iPod to your computer.
And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

Ipod Touch 2nd Generation stopped working..totally dead!

Hey.
Hoping that someone out there can help me out..my 2nd generation Ipod Touch has stopped working..wont charge..wont turn on..nada! It did the same thing last week but eventually it charged up and worked again. However this time its totally unresponsive.
I used it last night..turned it off and awhile later tried to turn it on again but it didnt respond. I tried to charge it overnight but its completely dead. I plugged it into a computer and a window appeared to say that everything is updated but still nothing. When I unplugged it and tried again the wondow did not appear.
Its had connectivity issues for awhile now but I assumed initially that it was just dodgy internet connections rather than a problem with the Ipod itself..clearly not!!
Ive tried all the solutions offered on the Apple website but it appears to be totally dead. I only bought it in February this year..its an Apple refurbished model.
Aside from the obvious frustration of now not being able to use it..to complicate matters I'm travelling in South America for the forseeable future so dont have readily available access to a Apple dealer etc.
As its still relatively new I should be covered by the warranty but just wondering what anyone out there would advise I do in order to either get it repaired or replaced given that I'm travelling etc.
Theres no authorized dealers in Cusco where I'm currently living..there appears to be one in Bolivia where I'm heading in a few weeks but I dont even have my receipt with me so I'm not even sure I can get it fixed under the warranty.
Would really appreciate any advice from someone that is a bit more familiar with Apple products and/or has some advice about warranties etc.
Many thanks in advance.

Any chance this could simply be a battery issue????? I do use it a **** of a lot..! Anyone any idea how much new batteries are?

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How to diagnose flickering exported JS animations from Flash CC?

Quick stats on my system:
Macbook Pro Retina 2012 running OSX 10.9.3
Flash CC 13.1.0.226
I'm not experiencing an error so much as a lack of understanding about how to diagnose Flash CC JS export issues. Here's the backstory:
In 2012, my company started working with an contract sprite artist. I was using the CS5.5 Creative Suite, and we were exporting normal png sequences from Flash for use in the game. After about 8 months, my cofounders and I realized that we could both reduce the load time for the game and also allow our artwork to be dynamically scalable by switching to JS exports of our art rather than the raster sprite sheets. Here's the blog post we wrote about it: http://blog.codecombat.com/hacking-our-way-to-vector-artwork-in-html5
At the time, I didn't have Flash CC, and was reliant upon the CreateJS plugin to export the required JS files: CreateJS Developer Center | Adobe Developer Connection After another month or so, our contractor upgraded their version of Flash and we started having compatibility issues reading FLA files, so I upgraded as well. After doing some reading, I concluded that the CreateJS plugin was now incorporated into Flash CC as the HTML5 doc type, which was confirmed when I checked out the publish settings and resulting files.
This is all a rather long winded way of saying that we have legacy artwork created with an older version of Flash but are now importing all of our artwork from JS files.
Fast forward to today and we have two big issues:
1) We can't figure out how to reduce the filesize of JS exports. As discussed in our blog post, vector artwork has upsides and downsides. One of the downsides we've found is that complex art that uses a lot of shapes ends up being substantially larger (in terms of filesize) than the appearance might otherwise suggest. Raster exports skirt this because a pixel is a pixel, but vector exports scale with the complexity of the source FLA. I'm not a Flash expert, and when we get files that are particularly complex, Flash either runs out of memory exporting them to JS files or we get files that are far too large to reasonably use. To be clear, the "out of memory" error isn't a problem because even if Flash finished the export, the resulting files would be too large for us to use (plus, I've done some digging and found a tutorial for correcting the out of memory error). Our artist is not familiar with the intricacies of the JS Flash exporter, so when we get a file that's too big or breaks the export, neither of us can really figure out a way to correct the problem. We have three questions in particular:
     a) Where can you view shape data that Flash is going to write to the JS files?
     b) Is there any way to edit said shape data inside the Flash CC interface?
     c) Is there any way to optimize shape data in Flash? For instance, in Photoshop, you can flatten images and export a psd with 500 layers as a single JPEG, is there any way to do something similar to shape data in Flash?
2) Exports frequently break in weird ways. Many of the sprites that we created a year ago haven't needed to be re-imported into our game engine for some time. But every once in a while, I need to go back and fix, improve, or tweak an existing sprite, and then I run smack into the issue of reconciling files that were created without thought to JS exports with our current system. Just last week I was running into this issue in a big way and I made a screencast for our artist (since we work remotely) that I hoped might give him a better idea of the problem: Flash Errors - Treasure Chest, Flippable Tile - YouTube
The two files mentioned in that screencast are both old (treasure chest) and new (flippable land tile). We have a few questions:
     a) Why are the treasure chest frames "flickering" in the html5 preview? The problem doesn't appear inside Flash and is inconsistent between files. There are two FLA files: one in which the treasure chest is empty, and one in which it's full. The empty animation doesn't throw any errors, either when converting to the HTML5 doc type or on export, but the resulting animation flickers. The full treasure, on the other hand gives me 21 lines of these errors when I do the conversion (not when I export): "Blend Modes(Layer) is not supported in HTML5 Canvas document, and has been converted to Normal in an instance of Movieclip <Path>." The result in both cases is the same: the animations flicker, and neither our artist nor us can figure out why, or for that matter, even begin to troubleshoot it. This SO issue seems to describe the problem, but was never resolved, and I can't find anything else that seems to address it: CreateJS Publish of Flash Project Flickers - Stack Overflow
I've uploaded the files involved to a public dropbox folder which I think you'll be able to access (Dropbox seems to be having some problems at the moment): Dropbox - flash_debugging
Since my questions are fairly involved, and my goal is to gain a better understanding of the UI, not simply resolve an error, I'd be happy to pay for someone's expertise/time in getting me up to speed. You can get in touch with me at george [at] codecombat.com

Hi George,
I have taken a look at the files full_treasure_chest.fla and flippable_land.fla that you have shared via drop box and found that they both uses blank keyframe(s) followed by Keyframe(s). This was an issue and has been addressed in the latest release Flash CC 2014 (released on 18 June, 2014). Can you please install the latest build 14.0.0.110 and try this out?
Thanks!
Mohan

So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead?

So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help

Did you try to charge it using the adapter or your computer?
If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
iOS: Unable to update or restore
If still not luck, your battery might have to be replaced:
Apple - Support - Service Answer Center

I am trying to hook up my 13" MacBook Pro to a 23" HD cinema display. How do I do this?

I am trying to hook up my 13" MacBook Pro to a 23" HD cinema display. How do I do this?

Your notebook computer must be awake to do what you want to do.
Get yourself a longer cable, or buy an Apple-TV box and do it wirelessly.
http://store.apple.com/us/ipod/ipod-accessories/apple-tv

How can I install another 4G Ram to my MBP (i.e. 8G Ram in total) and how much is it?

How can I install another 4G Ram to my MBP (i.e. 8G Ram in total) and how much is it?

If your MBP is the 2012 model that you have listed, then you can go up to 16GB.
You can get the ram from OWC http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_160 0MHz_SDRAM

HT201263 iPhone 4S totally dead

Hi.. Last night before going to sleep my iphone4S was about 5% charge and plugged on the charger but instead for charging, it was discharging very quickly till it shutted down and screen got black and no red bar appearing whenever i click the home lor the power button.. Thought it was nothing cause i was so sleepy and left it charging till this morning, i found my iphone dead with nothing appearing on the screen even if i press the power or home button, totally dead.. Ive tried to plug it on my pc(where i usually sync my iphone) and also tried to press the home and power button to exit DFU like i used to do but nothing happened.. I also tried plugging my charger to my ipad and it works on my ipad and even trying my ipad charger to my iphone but still the same..
I really need my phone for all of my contacts and some lists that are saved in the notes, so hope u can help me with this problem.. I really love my iphone so badly and i really need it..

I also got this same problem like u. I have an iphone 4s, after updating ios 7 it was good for about 3 days. Then after 3 days suddenly my phone automatically switched off and i was unable to switch it on. Besides the phone was not taking charge from the socket. And also was not connecting to itunes. Then i pressed the home and switch button for about 7 seconds and turned it completely off. And now after 2 days this afternoon i tried to switch on the phone. And it was just a miracle that my phone automatically started to work. And now um enjoying my phone then ever.
I think u should try it like me hope that will fine.

How to diagnose software / driver / video card issue?

My computer has been freezing up on a regular basis for the past few weeks . . .
I initially assumed it to be a bad stick of RAM, but I was able to reproduce the lockup with each stick individually.
I tried downgrading the kernel (but not Xorg or nvidia drivers), and that didn't fix anything.
At this point I don't really know enough (especially related to Arch specifically) as to how (which) log files to check for a reported error and issue.
The main issue of locking up occurs when I'm watching something on VLC at full screen. It's exacerbated with browsing or doing other stuff at the same time.
After a lockup I don't know if I should be checking journalctl / dmesg / Xorg.log / htop / etc . . .
Any advice / direction of stuff I can be checking after a crash would be MUCH appreciated. It really sucks not being able to use my PC like I used to.
If it help any my board/RAM are ~6yrs old, but the gfx card is new as of this year (I am using the regular nvidia drivers and multilib): EVGA 02G-P4-2645-KR GeForce GT 640
http://www.newegg.com/Product/Product.a … 6814130796

siberianli wrote:
Hi, I also have stability issues so I am also interested in tips how to diagnose an unstable system. In my case, in journalctl the problems right before freezing can be seen, e.g.
Nov 05 21:42:59 HT-PC kernel: BUG: unable to handle kernel paging request at ffffff7f811b3f25
Nov 05 21:42:59 HT-PC kernel: IP: [<ffffff7f811b3f25>] 0xffffff7f811b3f24
Nov 05 21:42:59 HT-PC kernel: PGD 0
Nov 05 21:42:59 HT-PC kernel: Oops: 0010 [#1] PREEMPT SMP
Nov 05 21:42:59 HT-PC kernel: Modules linked in: fuse nvidia(PO) drm bnep snd_hda_codec_hdmi rc_anysee snd_hda_codec_rea
Nov 05 21:42:59 HT-PC kernel: CPU: 0 PID: 769 Comm: plugin-containe Tainted: P C O 3.11.6-1-ARCH #1
Nov 05 21:42:59 HT-PC kernel: Hardware name: nVidia MCP7A/To be filled by O.E.M., BIOS 080015 03/24/2010
Nov 05 21:42:59 HT-PC kernel: task: ffff8800ca6cedb0 ti: ffff8800ca17a000 task.ti: ffff8800ca17a000
Nov 05 21:42:59 HT-PC kernel: RIP: 0010:[<ffffff7f811b3f25>] [<ffffff7f811b3f25>] 0xffffff7f811b3f24
Nov 05 21:42:59 HT-PC kernel: RSP: 0018:ffff8800ca17bf50 EFLAGS: 00010246
Nov 05 21:42:59 HT-PC kernel: RAX: 0000000000000001 RBX: 00000000ffffffff RCX: 00007f55285b3b78
Nov 05 21:42:59 HT-PC kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
Nov 05 21:42:59 HT-PC kernel: RBP: ffff8800ca17bf78 R08: ffff8800ca17bbac R09: 0000000000000000
Nov 05 21:42:59 HT-PC kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000001
Nov 05 21:42:59 HT-PC kernel: R13: 00007f55285b3b70 R14: 0000000000000001 R15: 00007f55285b4700
Nov 05 21:42:59 HT-PC kernel: FS: 00007f55285b4700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
Nov 05 21:42:59 HT-PC kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Nov 05 21:42:59 HT-PC kernel: CR2: ffffff7f811b3f25 CR3: 00000000ca16d000 CR4: 00000000000407f0
Nov 05 21:42:59 HT-PC kernel: Stack:
Nov 05 21:42:59 HT-PC kernel: 00007f5535615320 00007f553550ad78 00007f55285b3b70 0000000000000001
Nov 05 21:42:59 HT-PC kernel: 00007f5536cf1300 00007f55285b3be0 ffffffff814ea5dd 0000000000000293
Nov 05 21:42:59 HT-PC kernel: 0000000000000400 0000000000000000 0000000000000000 0000000000000007
Nov 05 21:42:59 HT-PC kernel: Call Trace:
Nov 05 21:42:59 HT-PC kernel: [<ffffffff814ea5dd>] system_call_fastpath+0x1a/0x1f
Nov 05 21:42:59 HT-PC kernel: Code: Bad RIP value.
Nov 05 21:42:59 HT-PC kernel: RIP [<ffffff7f811b3f25>] 0xffffff7f811b3f24
Nov 05 21:42:59 HT-PC kernel: RSP <ffff8800ca17bf50>
Nov 05 21:42:59 HT-PC kernel: CR2: ffffff7f811b3f25
Nov 05 21:42:59 HT-PC kernel: ---[ end trace 28ebc192d739a417 ]---
I tried various video drivers; nvidia 304, 325, 331 and nouveau, but in any case the system freezes after playing video for half an hour or so. The problem is more rare on a 32 bit installation than 64 bit, so perhaps you could move from 64 to 32 bit?
sorry for your troubles! i am not sure what the exact issue is, but i am on nvidia w/ video troubles as well . . . i have been running atop 24/7 and notice high r/w use of my disk at times when playback starts to stutter . . .
i haven't had a full-on lockup in days, but have still had one in recent time. i am not really sure how to trouble shoot this further.

Re: javax.faces.convert.Converter error, how to diagnose?

I’m rendering a region on a page. The region is a table which is entirely build in java. The .jsff for the region looks kind of like this:
<af:treeTable value="#{backingBeanScope.myBean.treeModel}" var="row" etc…. >
<af:forEach items="#{backingBeanScope.myBean.columns}" var="column">
<af:column binding="#{column.adfColumn}" />
</af:forEach>
</af:treeTable>
When a row selection happens, there is context menu build, where one of the menuitems pops a dialog. After the dialog is dismissed a return handler/listener is called:
public void propertyToolReturnHandler(ReturnEvent event)
AdfUtil.showMessageDialog(AdfUtil.MESSAGE_TYPE.INFORMATION, “some msg”, “some msg”, true);
Notice the last param to showMessageDialog, which is “true”, as I want to show the message as inline. However, having it set to “true” causes the following exception. If I set it to “false”, then it does work and a popup message appears with the “some msg” text.
I’m truly stuck trying to figure out what Converter is missing and where. Any ideas will be most welcomed!
The error I get:
[Ljava.lang.Object; cannot be cast to javax.faces.convert.Converter
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #2
Examining the EMGC_OMS1.out file I see (partial):
<Apr 10, 2013 2:39:38 PM PDT> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #2
java.lang.ClassCastException: [Ljava.lang.Object; cannot be cast to javax.faces.convert.Converter
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getConverter(ValueRenderer.java:197)
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.addClientConverterRenderScript(ValueRenderer.java:220)
     at oracle.adfinternal.view.faces.renderkit.rich.OutputLabelRenderer.encodeAll(OutputLabelRenderer.java:241)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1431)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2778)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.access$500(RegionRenderer.java:49)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:574)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:553)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXGroup.processFlattenedChildren(UIXGroup.java:96)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:160)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer._encodeChildren(RegionRenderer.java:270)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.encodeAll(RegionRenderer.java:201)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1431)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at oracle.adf.view.rich.component.fragment.UIXRegion.encodeEnd(UIXRegion.java:321)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2778)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2149)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer.access$500(PanelBoxRenderer.java:39)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer$ChildEncoderCallback.processComponent(PanelBoxRenderer.java:2267)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer$ChildEncoderCallback.processComponen
Ania.
Edited by: user12869467 on Apr 12, 2013 1:57 PM

I did more trial/error with this problem. It is not related to AdfUtil.showMessageDialog().
My java-built table, shows a popup. After the popup is dismissed, I will get this exception, not right away though. The view has tabs, if after dismissing the dialog, I navigate to some other tab, and then back to the one which has the table, that is when the error shows up.
ANY help on how to diagnose this problem will be very much appreciated!
Ania.

7500 Prism - Totally Dead. Need some help badly...

Heya! I've had my 7500 Prism for a very long time and the only bad thing about it was that it sometimes used to freeze when playing a video. However, this bug got annoying enough to make me made the snap decision to update my firmware version. So far, so good, but there were no newer versions for my Product Code, so I changed it and updated. Unfortunately, I lost my native language menu in the process (should have known better), and I decided to downgrade. At this point, something during the downgrade went wrong and now my phone is totally dead. It won't boot and it won't even charge. Something like "Charger not supported" comes up and I am using the original charger. When it had enough battery, it went as far as showing the Nokia logo and than turned off on itself. I have tried to fix it by restoring the original version, but the computer can't pick it up fast enough before it goes off again and so all the programs I've tried can't detect the phone. Since I am laical in this area, I've figured someone from the forums with much more knowledge than myself could help me out So, I am open to suggestions. Thanks in advance!

Well I'd lie if I say that I didnt see that comming Okay, thanks, I'll check these unofficial forums you mentioned. I had no idea that something could go so wrong (softwarewise) to render my Prism useless...

My iphone 4 turned off and will not turn back on. i know it is not dead, how do i fix it.

my iphone 4 turned off and will not turn back on. i know it is not dead, how do i fix it.

Charge with the mains charger for 15 minutes, then disconnect and hold HOME and SLEEP until an Apple logo appears (about 10 seconds).

How to diagnose HTTP 500 Internal Server Error

Hi all,
I have installed SSM 7.5 SP05 Hot Fix 1 on a Windows 2003 Server (64 bits), but in the End User Interface, the Home and Strategy tabs always shows an HTTP 500 Internal Server Error, how can diagnose this kind of error in order to solve this problem? Other tabs, for example the Initiatives tab works fine, the problem is only with the Home and Strategy tabs.
Thanks in advance.
Best Regards,
Douglas

Hi Ricardo,
After configuring the model connections all is working fine, thank you!
I have the idea that in previous versions that is not needed and just affect the Scorecard tab, now I know that if affects other tabs too, however, instead of HTTP 500 error would be more helpful another message that suggest the configuration as a requirement.
Again thanks for your help.
Best Regards,
Douglas

23" Cinema totally dead - how to diagnose?

Similar Messages

Maybe you are looking for