2310m monitor starts OK, then displays stripes
I bought the 2310m monitor and an extended, 2-year warranty, with a Pavilion p6680t desktop in December 2010. It worked well until a month ago. Now, the 2310m monitor has an intermittent problem. Please see the picture. It will start growing these vertical, blue and purple colored, stripes at the bottom of the screen. Within 15 seconds, they crawl up to the top of the screen, obscuring everything.
I tried a new HDMI cable, but I got the same behavior.
Any ideas?
Thanks in advance for your help!
LO_HP_Fan
You should determine if the monitor is faulty or if there is a chance that your PC's video card or the monitor cable is at fault. The best way to achieve this is to connect this monior to another PC and see if it exhibits the same fault. If it does, your options are:
Call HP support in your local country to find out your options, i.e. repair, and/or
Think about shopping around for a replacments monitor
Although I am an HP employee, I am speaking for myself and not for HP.
regards davida
"Although I am an HP employee, I am speaking for myself and not for HP"
Similar Messages
-
My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??
-
When we go to view albums from our iphoto library on apple tv it takes forever to load and then it only plays between 24 and 35 photos then goes back to the start. Then it goes through again and displays 1 more photo each time. Please help!
It's likely that your Library database has been damaged in all the crashing.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Monitor occasionally doesn't display imagee/wake
Hello
I'm using an NEC monitor on a MacPro tower (2 x 2.66). I upgraded to a clean install of Lion, 10.7.3. I'm having intermittent issues with my monitor not displaying a picture. I did not have this issue previously wiht 10.6.
Typical scenario -- monitor & computer will go to proper sleep. Hours later, if I click on the wireless mouse or keyboard, the system seems to wake from sleep (can hear the drive spin up, fan, etc.). But the monitor doesn't wake/display a picture. I have to press the power button on the machine to shut it down (usually a no no), and then power back up to get a picture to come on.
Other scenario -- machine is completely powered off, and when I start it up, no picture is display. I power down the machine again, then power back on, screen starts up no problem.
Again, this doesn't happen all the time but enough to be a pain, and I worry about having to always force power down the machine (by holding the power buttton) to turn it back on and try again.
Anyone else reporting similar or advice on things to try?
CheersActually, after gnome 2.6.28 update (i don't remember if there was a xorg update) i must restore the xorg.conf (the minimal config file from xorg log, as from wiki). The key is that you must add a "Virtual" line under subsection "Display" so that xrandr can output in total resolution of both displays. Otherwise it will complain about the screen size not big enough.
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
SubSection "Display"
Depth 24
Modes "1920x1200" "1440x900" "1024x768" "800x600" "640x480"
Virtual 3360 1200
EndSubSection
SubSection "Display"
Depth 32
Modes "1920x1200" "1440x900" "1024x768" "800x600" "640x480"
Virtual 3360 1200
EndSubSection
EndSection -
Why the SQL Monitor report do not display?
Why the SQL Monitor report do not display?
SQL> set serveroutput on
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.93
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL>You can you hint /*+MONITOR*/, and then use this procedure to display the monitor report:
SQL> select /*+ monitor */ *from hr.employees where salary>10000;
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.21
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL Text
select /*+ monitor */ *from hr.employees where salary>10000
Global Information
Status : DONE (ALL ROWS)
Instance ID : 1
Session ID : 170
MY_REPT
SQL ID : 4tj5p5m6qrkmp
SQL Execution ID : 16777216
Plan Hash Value : 1445457117
Execution Started : 04/30/2010 10:51:23
First Refresh Time : 04/30/2010 10:51:23
Last Refresh Time : 04/30/2010 10:51:23
| Elapsed | Other | Fetch | Buffer |
| Time(s) | Waits(s) | Calls | Gets |
... -
We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
BOP Monitor missing Sales Orders, Displays only STOs
Hi,
We have an issue with a back order processing monitor screen. BOP Monitor displays both SO and STO immediately after the BOP run but wipes out the SO from display after few hours. I guess the SOs have been deleted from buffer and so we don't see them on monitor screen.
We have no functional issues as SO have been processed and confirmed but only the monitor screen misses SO. How does the buffer removes only SO? Do we have any programs to change the buffer? Much appreciate your clues here.
ThanksHi Asokan,
BOP Monitor is a dymanic display unlike SM37 background jobs log. So, if you see the Monitor immediately after BOP run, it would show you the results of BOP. However, if you see after some hours, the display will show you dynamic situation of your BOP result elements i.e. situation of schedule lines at that moment.
If you have any program in R3 that updates sales orders, then there is possibility that the sales order schedule lines are updated and no longer available for display.
Please check whether you get any messages in BOP Monitor. Also, for reference to BOP runs, please refer BOP_RESULT instead of Monitor. This report is static and will show you situation before BOP and after BOP.
Regards,
Bipin -
Failed to get Monitor - Start Maintenance Mode
Hi,
Am struggling with a problem with Orchestrator R2 apparently not recognising output from a Monitor alert step in a run book. I have Orchestrator 2012R2 and SCOM 2012R2 configured. Orchestrator is co-located with VMM2012R2.
Operating system for all is Windows server 2012
I have installed and deployed the Orchestrator R2 Integration packs which in deployment manager state version 7.2
I have checked to ensure that both Orchestrator, SCOM and VMM are all R2 (They are)
I am looking to create a runbook that will start services as per the link here: (Thanks to Jakob for this)
http://blog.coretech.dk/jgs/sco-2012-scom-2012-best-practice-monitor-alert-and-restart-a-service/
I can test the connection to the SCOM server - fine
I create the monitor alert step and test - fine
I create the start maintenance mode step and get the following error:
Filed to get Monitor. The exception was "An object of class MonitoringObject with ID 00000000-0000-0000-0000-000000000000 was not found.".
I have used the runbook tester and the monitoringobjectfullname is present in the output for the start maintenance mode step.
However irrespective of the variable that I attempt to use in start maintenance mode step I continue to get the same error as above.
The monitor alert step completes with no issues, but everytime on the start maint mode step it fails.
I have validated the SCOM connection account has all the appropriate SCOM permissions. I have also provided it with full domain admin rights, but with no success.
Any ideas on how to troubleshoot this would be welcomed
Thanks in advanceHi Stefan,
A little extension of your approach as this is only usable if you want to set a Windows Server into Maintenance Mode - but not e.g. for Distributed Apps
I just required the "Start Maintenance Mode" Activity to set a distributed app and a websphere application server instance (which is not linked with the server itself). And I did not find any documentation how to fill the field - only for Windows
Computer.
So I'll post my result on how to get the value which needs to be entered within the "Monitor" field:
(PowerShell - Use "Activities > System > Run .Net Script > Type: Powershell)
Import-Module OperationsManager
$object= Get-SCOMMonitoringObject -displayname "<desired object displayname";
# or use the ID instead:
# $object = Get-SCOMMonitoringObject -ID "<ID of object>";
$name = $object.displayname;
$fullname = $object.fullname;
$monitor = $name + " : " + $fullname
Then put $monitor within "published data" and you can use it directly in the "Start Maintenance Mode" Activity.
This only works if the runbook is running on a SCOM management server as it requires the SCOM Powershell Module. But at least it somehow shows the syntax.
Best Regards
Klaus
Austria -
Trex cannot start TREXAdmin.sh (display error)
Hello we have trex version 7.10.55.00 on linux x64 installed .
To get to the admin screen with TREXAdmin.sh I first start up attatchmate Reflextion x (version 14.05)
Then do en export of my ip address
export DISPLAY=01.02.345.678:0
Then run the TREXAdmin.sh command and the admin screen works ok
I just installed a new version of trex on linux X64 7.10.61.00 and when I try to access
TREXAdmin.sh I get the following :
Starting TREXAdmin on display 10.50.123.456:0, please wait.
Traceback (most recent
call last):
File "<string>", line 1, in ?
File
"/sapmnt/D19/exe/nuc/linuxx86_64/TREX_7.10.61.395713/python_support/TREXAdmin.py",
line 2690, in main
root = Tk.Tk()
File
"/usr/sap/D19/TRX05/exe/Python/lib/python2.4/lib-tk/Tkinter.py", line
1569, in __init__
self.tk = _tkinter.create(screenName,
baseName, className, interactive, wantobjects, useTk, sync, use)
_tkinter.TclError:
couldn't connect to display "10.50.123.456:0"
I have found 1 pc (vista with same version of reflection x) where it works ok and a windows server that also works.
I did some compares of the reflection x settings but have not found any difference. any ideas?Hello,
Please check on which port the xmanager is listening, for example from your log it shows as "10.50.123.456:0" make sure your xmanager tool also shows '0' as the port.
Thanks,
Regards,
Yoganand.V -
Photoshop Elements crashed on my MAC and gave me the suggestion to go to Help, then Updates to correct the problem. When I do this the update starts and then tells me to close Elements to continue. I close Elements and continue then get this message - PLEASE CLOSE THE FOLLOWING APPLICATIONS TO CONTINUE - ElementsAutoAnalyzer AND ElementsOrganizerRevelAgent. I have no idea how to close these applications and therefore I am not able to get the updates.
Applications>Utilities>Activity Monitor and you can kill them there.
-
Print jobs keep starting and then error in print que
I have a HP Photosmart 100D series printer. The print jobs keep freezing up in the que. The jobs start and then after a page or two the error message appears when checking the status.
I uninstalled the printer and reinstalled
I have download new drivers
I have run the "HP Print Doctor" it gives a message to save work, close and programs and restart the PC and then restart the ulitity. I have done this and still get the message that it cannot fix the que error.
What do you suggest as a solution to this frustrating problem?
I have Windows 7 Professional OSHmm. I have an HP printer that's behaved fine, but I've moved it to my iBook (running Tiger) so I can print wirelessly.
It may be an issue with the driver or the software. I'm guessing the software was written for the PPC machines, and that might be causing the problem.
The way I've checked this is to open up "Activity Monitor" (Applications>Utilities) and find the processes related to your HP printer (usually begin with "hp") under kind what's shown?
You might want to look into the CUPS idea presented earlier as it may give you better results.
~Lyssa -
Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?
Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
Using I Pod NANO. Installed I Tunes on Windows 7 Pro, 64 Bit.
Software works fine. Only problem is that I can't open up the
Store page from in the software. It just shows a blank screen.
Looks like it starts but then just freezes.
IT department worked all day. Reloaded software, set up
security, checked msconfig files. Tried all sorts or revissions.
Nothing works? Yet it works fine on my Windows 7 Home edition?
ANYONE have a clue. This Apple software is not the friendliest!!
This is very frustrating for something so simple to use!
This used to work. Upgraded to 10.3.3.. No good. Tried other revisions,
No Good! Can't purchase music or have the website fully pull up at all
from I Tunes.
Appreciate any help if some has been through this. My service that
I have for IT had to give up. 6 hours of things they tried. Nothing worked.You would get better response from the iTunes community forum.
Have a nice day! -
Form where testing if radiobuttonlist is null and then display message
I created a test form to try to get this work and can't seem to make it work. In my form I have a ddlist on page 1. on page 2 I have a subform that the selection in the ddl makes visible--that's working.
There is a radiobuttonlist in the subform. I'd like to check on the submit button if ddl == 2 and radiobuttonlist == null then display a message. Here is my script:
//Create a variable to hold the document object
var
v3 = form1.page1.division.rawValue;
var
v15 = form1.page2.pcEquip.dirAbove.RadioButtonList.rawValue;
if
((v3 == 2) && (v15 == null)) {
xfa.host.messageBox( "Please indicate whether the associate is a director or above" );
xfa.host.setFocus("form1.page2.pcEquip.dirAbove.RadioButtonList");
else
Button3.execEvent("click");
The script is finishing as desired with the email window, but doesn't catch that the radiobuttonlist is null. Any help would be appreciated.
Thanks,
MDawnHi,
Test the radio button exclusion group against an emply string. For example:
if (v15 == "")
// your script here.
Hope that helps,
Niall -
I am having a problem. When I click on the Mobile Facebook icon it acts like it is going to start opening then it quits and goes back to the icon. So I can't use Facebook on my iPhone 4
Force quit the application and try again.
Try a reset or restart of the device, trying the app after each step.
Maybe you are looking for
-
Combining tracks into one album, choosing track order
Hi, I've searched this forum and haven't been able to solve this yet. I have a bunch of b-sides that I want to add to an album proper. Say the album has 12 tracks. I am able to add an additional song to the album, which increases the track count to 1
-
Deleteing files quick 1 by 1 help needed
So I have my holiday photos and am scrolling through them one by one and using cmd&backspace to delete unwanted photos. thing is after that the selection goes back to the top of the list. this is not efficient for me. on windows when doing something
-
(it's an answer to..) "My mac keeps returning to login window"
As above my imac mini kept going into a deep sleep when left unnatended for an hour. I had just upgraded to Mountain Lion AND was using new 'Canopus' hardware to convert my old video tapes AND had read "incompatible software" messages so i suspected
-
Delete pament proposal grayed out in F110_ECC6_Oracle
Dear all, We have entered parameters then edited proposals. After proposal while running the payment run we got the proposal status as below Parameters have been entered Payment proposal has been created Payment proposal has been edited Payment run h
-
Trying to set up time machine but cannot get it to find my disc plugged into Airport.