2330 classic - main screen layout

just got a nokia 2330 classic
1) Is there any way to change the default main screen layout of the phone?
can you change the digital clock ot an anlogue one?
can you add your appointments of that day that are in the calendar?
now the standard main screen layout is :
signal strength - battery life - icons
provider - profile
clock
date
greetings
Solved!
Go to Solution.

The screen layout is fixed, this is the same for all Nokia Series 40 phones.
Some phones have an "Active standby" or "Home screen" feature which would allow you to put other things, including the calendar, into the default screen but the very basic 2330 isn't one of these.

Similar Messages

  • 3109 Classic - Can I change main screen?

    Just got a 3109 Classic and getting to grips with it!
    One thing that I would like help with it the main screen:
    It has 4 icons across the top (Calendar, Web, My Items and media)
    - How can I access these?
    - Can I change them?
    Below that are some 'notes'
    - Can I prevent these from being displayed?
    Have looked through manual and, so far, not found the answers - hope someone here can help!

    You need to customise active standby to change these settings.
    Page 24 of the user guide tells you where to find active standby.
    http://nds1.nokia.com/phones/files/guides/Nokia_3109_classic_UG_en.pdf

  • 2330 - Hide operator details from the main screen?

    Ok, i gave up about making the clock smaller, but now if i did remove the clock and the date from the main screen. How can i remove also the operator name ? That's "Vodafone RO".
    Solved!
    Go to Solution.

    haija wrote:
    save failed error
    Is your Phone Network Locked ?
    If YES.. then this feature may have been locked..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Messenger on 2330 classic

    Hi all,
    I have setup the IMAP client on the 2330 classic for my gmail account and it works just fine. However I am having difficulty getting the Messenger client to work.
    When I try and use Messenger it always comes up '! Check connection settings'. I've looked all over the phone but cannot find anything relevent. I have al;so tried it while connected to the mailbox. I have no problems connecting to internet with any other apps.
    I'm using Mig33 at the moment, and although it's good I would like to use the built-in features where possible because of the low available memory on this phone.
    Anyone know how to get it going? Would appreciate some help.
    Regards.
    Message Edited by rampage on 20-Oct-2009 10:22 AM

    The screen layout is fixed, this is the same for all Nokia Series 40 phones.
    Some phones have an "Active standby" or "Home screen" feature which would allow you to put other things, including the calendar, into the default screen but the very basic 2330 isn't one of these.

  • IPod main screen shows "No Music" even though...

    My ipod main screen shows "No Music", "No Videos" "No Pictures" etc... and when I click on music, for example, it shows no bands, no nothing. BUT when I go to settings it shows I have 67.6 GB free space. meaning I have around 53 GB of files on my ipod (It's a classic 120G ipod). I've tried restarting it, and it didn't help. I think if I restore default settings I'd lose all the files. Has anyone experienced this? Can anyone help? I'm desperate! They're in there somewhere.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync (from your description it is not clear you did that)
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

    please someone who help me please
    when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

    You need to help us first ...
    Computer specs:
    OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
    Program specs:
    Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
    Footage file type: MXF, AVCHD, MOV, m2s, what?
    Even the camera it was shot on can be of interest at times.
    And did you use media browser to import, then project panel to drag & drop?
    Neil

  • How to creat a select-options in the screen layout of se80.

    Because in se80 ,the screen is drawed in the screen layout,but it just have text-field for parameter.
    Thanks!

    In your main program, you can declare your desired select-option. Do your select-option declaration before calling your dialog screen.
    Create a subscreen in your screen's flow logic (PBO & PAI) that contains your selection screen with its corresponding screen number of your declared subscreen.
    sample code of select-option declaration below.
    SELECTION-SCREEN BEGIN OF SCREEN 5003 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT (18) TEXT-ABK FOR FIELD S_ABKRS.
    SELECT-OPTIONS: S_ABKRS FOR PA0001-ABKRS.
    SELECTION-SCREEN POSITION 47.
    PARAMETER: P_ATEXT LIKE T549T-ATEXT VISIBLE LENGTH 30.
    SELECTION-SCREEN POSITION 70.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PARAM.
    SELECTION-SCREEN END OF SCREEN 5003.
    call screen 5000.
    Sample Flow logic Code below of screen 5000:
    *--- PBO
    PROCESS BEFORE OUTPUT.
      CALL SUBSCREEN SUB_5003 INCLUDING SY-REPID '5003'. " subscreen 5003
      MODULE STATUS_5000.
      LOOP AT GT_MBBH INTO GS_MBBH WITH CONTROL TC_MBILL
                    CURSOR TC_MBILL-TOP_LINE.
      ENDLOOP.
    *--- PAI
    PROCESS AFTER INPUT.
      LOOP AT GT_MBBH.
        FIELD GS_MBBH-SELEC MODULE TC_TABLE_MARK ON REQUEST.
      ENDLOOP.
      MODULE USER_COMMAND_5000.
      CALL SUBSCREEN SUB_5003.  " subscreen 5003
    Hope this will help..

  • Nokia 2330 classic: display becomes always black a...

    Hello,
    I proudly own the nice 2330 classic. The only point, which I am really unhappy with, is that the display always becomes  black after a few seconds. One can even not see if the phone is on or off. 
    Does somebody now if it is a fault? I did not find any option in the settings for it. Is a newer software release available, which fixes it?
    thanks
    Ulrich

    When you press the Red key, does the screen light-up?  If yes, then the phone probably just went into power saving mode, hence blanking the screen and turning off the backlight.
    You could try playing with the settings for this under the Display Settings in the menu to find out what works for you.  Usual settings include Power Saver mode, Screensaver, Backlight, Sleep mode.

  • What is maintanence level in  screen layout for asset master record

    hi everyboby,
    can anyone explian this
    when I'm defining screen layout for asset master record to  make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
    thanks
    siri

    hi..
    thanks for reply again.
    If i select  business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same  error msg.Anyway  i can create asset master now.thanks
    regards
    siri

  • Screen layout discrepancy between AS01 and AS91

    Hi Everyone,
    We are trying to create an asset via AS01 and we noticed that the field for serial number is grayed-out. However, in the screen layout settings for the asset master record, the serial number is defined as optional.
    On the other hand, if we create a legacy asset via AS91, the serial number is open for editing.
    What could be the problem causing this discrepancy?
    Thanks in advance.
    Joey

    Hi
    check at what level you maintain this field, Asset class,Main asset or/subasset level.
    Check what you are doing i.e. creation of main asset or sub asset.
    I think this checking helpful for you.
    Regards
    Srinivas

  • Screen Layout for Dep Area in Assete master.

    Hi,
    I am trying to display the fields "Expired Useful Life & Expired life -Period" in Dep areas tab of assets master.
    My screen layout is 1000 Dep on main asset level.
    i have assign this to Dep area in OAYZ.
    I made these 2 filed optional in screen layout,even though i am not able to see these fields in asset master.
    When i tried to other fields , it got effected.
    What is the reason behind this?
    Please provide me the solution to display these fields in asset master.
    Thanks Regards,
    Uday

    Hi,
    I checked all stated things.It is right.
    Still i m not able to see it in master.
    When i go to envirnment in aso2, it shows the screen layout rule with these fields as optional.
    So i am not able to understand ,how to bring that fields?
    Please anyone provide me the solution.
    Regards,
    Uday

  • Configuring the screen layout of C5-00

    I would like to remove almost all items from the main screen lay out:
    - add contacts
    - calendar entries
    - set up email
    also the horizontal list menu on the bottom of the screen with items. camera, messages, clock, maps, chat and ovi  is unnecessary for me.
    I have not found how to change  the screen layout or remove the items I want.  Hope there is a solution to this problem too. A New phone?
    Solved!
    Go to Solution.

    Thank you both: I finally got the better screen...
    selected the basic homesreen theme
    settings-- settings... standby --standby...

  • Moving apps onto the main screens

    I have too many apps to appear on the main screens and have now deleted some from the main screens. How do I move the apps onto the main screen? My iPhone is not Synced with iTunes for apps, so when I sync it, all apps are deleted. I can obviously access them through Spotlight but want to access them from the main screens.

    I have too many apps to appear on the main screens and have now deleted some from the main screens.
    How do I move the apps onto the main screen?
    I can obviously access them through Spotlight but want to access them from the main screens.
    I'm assuming you mean that you installed more apps than can fit on the 11 home screen pages, and the overflow apps are only findable with iPhone Search.
    1. Delete some apps as you have done.
    2. Settings > General > Reset > Reset Home Screen Layout
    My iPhone is not Synced with iTunes for apps, so when I sync it, all apps are deleted.
    1. Be sure you've authorized your computer in iTunes to the iTunes store account you used to purchase apps.
    2. After connecting your phone to iTunes, and before syncing (disable automatic syncing), right-click your device and select "Transfer Purchases."
    3. You might want to do this before deleting apps from the phone so that you won't have to re-download them from the App Store.
    Message was edited by: modular747

  • Asset screen layout  - asset class maintenance level - where to configure?

    When configuring the asset screen layouts, there are few maintenance levels eg. class, main and sub.
    If choosing class level, where do we maintain such? I can't find a configuration for this. Or is there an asset class creation transaction?

    Dear Pixel8 ation,
    You need to configure Asset Class first.
    Financial Accounting -- Asset Accounting --- organizational structure -
    Asset Class. First you have to define Account determination and screen layout based on these only you need to Configure Asset Class. 
    After Configuring Asset class, you will create Main asset base on Asset class in AS01 and create Sub-Asset from main asset as in AS11.
    Hope this helps
    Regards,
    Raziq
    Edited by: Raziq Fareed on Jan 31, 2011 12:07 PM

  • I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

    I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

    You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

Maybe you are looking for