24/192 khz with DAC inside lighting to 30 pin

The DAC inside the lighting to 30 pin adapter is a wolfson series DAC that supports 24 bit / 192 khz playback. Since you can not upload these to your phone natively I was wondering if I got an app that supported uploads of these files to my iPhone 5 if it would play at the full 24/192 khz. I know this seems like a stupid question but a lot of apps say things that thy dont do, especially since I have no real way of telling.

Yes, we have DNS inspection turned on. I think what I need to work with the VCS server, is that my internal subnet on the inside interface of the ASA (192.168.225.0/24) need to access a NAT'd IP (1.2.3.0/29). The VCS server has an IP address which is in the outside interface IP range.
The internal clients are having issues connecting to 1.2.3.2 which is the VCS server.
192.168.225.x (Inside Interface Range)<=====>(Outside Interface Range)1.2.3.2/29
The internal hosts cannot connect to 1.2.3.2/29.
I didn't know if this was some security feature that didn't allow internal hosts to access the outside internface IP range or not. Currently all internal hosts are PAT'd to 1.2.3.1 (outside inteface IP)

Similar Messages

Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help.
Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination.
Attachments:
TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

Hi Aaron,
Here you go, this is made with a USB-8452.
When you run the code tick the power en dac enable box on.
Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
Do you use any fiber hardware with the TCS3414?
gr,
Attachments:
TCS3414.vi ‏63 KB

Does Airport Express support 24 Bit - 192 KHZ digital out ?

Hello.
I have Airport Express connected to a high end external audiophile DAC and would like to know if it supports 24 bit and higher clock frequencies like 96 KHz or 192 KHz.
Thanks for your thoughts.
Nuno

You may find the following article helpful in answering your question. (ref: http://www.stereophile.com/accessoryreviews/505apple/)

Need help with MC with links inside

Anyone can shine some light on trying to reproduce something
similar to this?
http://www.focus.ca/home.html
What I need is how to do one of those tabs that aniamtes down
and reveals links inside. I have been at this for days.
I am very new to flash and need more assistance on the
construction of this project.
So far, I know how to make a MC and animated it for
rollover/rollout, but the link inside won't work because the action
for the MC is interferring with the inside button actions. So, what
is my next step? I have my MC on one frame in the main timeline and
need to perform all animation inside that and add buttons also?
Would I put an Insible Button in their too?
I need help?

As example of a text based navbar like Roddy suggested can be seen here: Text Based Navbar. With it you can have complete control of the font (just use a Web Safe Font, color, rollover color and size. You can then copy and paste the text box to each page.
OT

My ipad has been turning off every now and again for some time now but last night it turned off and when i try to turn it back on its just a blank screen with the back lighting. please help me

Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
thank you

If a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on. All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYone please expl

Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???

The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

My macbook isn't powering up and makes a beeping noise in time with the sleep light

Hi There I hope someone can help!!!
I had disconnected the power cable and left the MacBook in sleep mode with the lid shut. When I now go to open my MacBook up, and wait for my system to resume from where I left off the screen doesn't on and the sleep light goes off. when I close the lid the sleep light goes back on as if it is in sleep mode but the same happens when I open it again, no power to the screen.
I order to try get my MacBook working again I tried holding down the power button and switching it back on again but the MacBook now looks as if it is going to power up but the sleep light comes on for about 3 secs and then beeps, then every 4-5 secs constantly the MacBook beeps once in time with the sleep light (to note the sleep light is not following its usual fade on fade off rhythm).
I have tried resetting the SMC using the shift command control option and power button (also this is the only way to stop the beeping and flashing) and when you try and switch on the MacBook if you just press the power button it just follows the same beep with sleep light routine, but if you hold the power button in then the sleep light then flashes quickly about 4-6 times and then starts to beep in time with the flash again.
I will also add I have not reconfigured anything or added any RAM to my MacBook it is still on the standard (manufacturing) configuration as I have been looking about for anyone with similar issues and the main question back seems to be have you changed the RAM, I have also tried resetting teh RAM and the proble still persists.
If someone can help it would be awesome!

Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

Unable to Load CSV file with comma inside the column(Sql Server 2008)

Hi,
I am not able load an CSV file with Comma inside a column.
Here is sample File:(First row contain the column names)
_id,qp,c
"1","[ ""0"", ""0"", ""0"" ]","helloworld"
"1","[ ""0"", ""0"", ""0"" ]","helloworld"
When i specify the Text Qualifier as "(Double quotes) it work in SQL Server 2012, where as fail in the SQL Server 2008, complaining with error:
TITLE: Microsoft Visual Studio
The preview sample contains embedded text qualifiers ("). The flat file parser does not support embedding text qualifiers in data. Parsing columns that contain data with text qualifiers will fail at run time.
BUTTONS:
OK
I need to do this in sql server 2008 R2 with Service pack 2, my build version is 10.50.1600.1.
Can someone let me know it is possible in do the same way it is handle in SQL Server 2012?
Or
It got resolved in any successive Cumulative update after 10.50.1600.1?
Regards Harsh

Hello,
If you have CSV with double quotes inside double quotes and with SSIS 2008, I suggest:
in your data flow you use a script transformation component as Source, then define the ouput columns id signed int, Gp unicode string and C unicode string. e.g. Ouput 0 output colmuns
Id - four-byte signed
gp - unicode string
cc - unicode string
Do not use a flat file connection, but use a user variable in which you store the name of the flat file (this could be inside a for each file loop).
The user variable is supplied as a a readonly variable argument to the script component in your dataflow.
In the script component inMain.CreateNewOutputRows use a System.IO.Streamreader with the user variable name to read the file and use the outputbuffer addrow method to add each line to the output of the script component.
Between the ReadLine instraction and the addrow instruction you have to add your code to extract the 3 column values.
public override void CreateNewOutputRows()
Add rows by calling the AddRow method on the member variable named "<Output Name>Buffer".
For example, call MyOutputBuffer.AddRow() if your output was named "MyOutput".
string line;
System.IO.StreamReader file = new System.IO.StreamReader( Variables.CsvFilename);
while ((line = file.ReadLine()) != null)
System.Windows.Forms.MessageBox.Show(line);
if (line.StartsWith("_id,qp,c") != true) //skip header line
Output0Buffer.AddRow();
string[] mydata = Yourlineconversionher(line);
Output0Buffer.Id = Convert.ToInt32(mydata[0]);
Output0Buffer.gp = mydata[1];
Output0Buffer.cc = mydata[2];
file.Close();
Jan D'Hondt - SQL server BI development

Font problems with Gill Sans Light in Dreamweaver

The following site: www.cabrackett.com/testSite has a very small testing html page illustrating a problem I have been having with Gill Sans Light.
In Dreamweaver CS4 Design View, Gill Sans Light displays properly. When viewed in a browser (Firefox 3.5.3) or in Live View, a generic serifed font shows up. Assuming that the only reason for this could be improper installation of the Gill Sans Light font, I opened MS Word and the Gill Sans Light font works perfectly.
Also, when Gill Sans Bold is used, instead of light, the font does show up properly in all cases: Design View, Live View, and Firefox.
Any ideas what is going on? If the Light font were corrupted then how could it work in MS Word?
Thanks,
Chuck
MacPro, OSX 10.5.8, Dreamweaver CS4, Firefox 3.5.3

As Joe says, Gill Sans Light isn't "web-safe" because browsers rely on the font being present on the user's computer. I don't have Gill Sans Light on my computer, but I do have Gill Sans MT. As soon as I changed your CSS to Gill Sans MT, it worked.
Because fonts are dependent on what is available on the user's computer, you should always specify several fonts in order of preference, and end with a generic font (serif, sans-serif, monospace, cursive, or fantasy). For example:
body {
font-family:"Gill Sans Light", "Gill Sans MT", Tahoma, Geneva, sans-serif;
The first one available on the user's computer will be displayed. If none is available, a generic sans-serif font will be used instead.

HT3412 I just ordered and received 2 large Hardcover photo books and one arrived with the inside binding messed up. Do you know how this can get corrected?

Have you tried returning a photo book that has a binding problem? I just ordered 2 large hardcover photobooks and one arrived with the inside binding messed up. Do you know how this can get corrected? They were over $80 and it seems they should not be flawed. I would appreciate any tips. lindajenkins

Contact Apple Support - link at the bottom of every page of these forums
LN

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

If another person or company serviced your iPad, your warranty has been voided. Apple will do an out-of-warranty exchange. Have you contacted the original service provider, and complained?

Handling ActiveX events with Javascript inside BSPs

Hi,
Has anyone any experience with handling events from ActiveX objects (using the <object> tag) with Javascript, inside BSPs?
I'm developing solely for the IE browser. Reading other threads, I know that the usual way this is done is via the below code excerpt:
<i><script type="text/javascript" for="MyObject" event="Object_Event">
js_function();
</script></i>
I create a HTML page, with the <object>, <script..for..event> tags, etc. Everything works fine when the page is run from my local system. However, when the code is run from WebAS (Activate then Test (F8)), the ActiveX object loads fine. But the javascript does not respond to events thrown by the ActiveX object.
I wonder if anyone can share their experiences on this issue.
Thank you.
Amos

It's the Skype4COM (v1.0.0.17) wrapper for the SkypeAPI, available at https://developer.skype.com/Download
(Note: NOT the v1.0.0.16, which comes with the Skype ActiveX Tools package).
I'm trying to use javascript to handle the event "CallStatus", thrown by Skype4COM, as shown in the code excerpt below.
<i><script language="javascript" type="text/javascript" for="Skype" event="CallStatus(Call, Status)">
handleCallStatus (Call, Status);
</script></i>
It works locally, but not when in a BSP.
It's rather interesting to mess with Skype calls from a webpage. Do let us know how your experience goes
Amos

24/192 khz with DAC inside lighting to 30 pin

Similar Messages

Maybe you are looking for